Renovation work of Chanasma Sub Division Office with modular furniture work at Chanasma under Patan Division

WORK Renovation work of Chanasma Sub Division Office with modular furniture work at

Item No. Description Qty. Unit Rate Amount

Removing and scraping of old deteriorated plaster of any thickness

fromm wall / R.C.C member including stacking of serviceable

material and disposal of unserviceable from site of work with all lead

Dismentaling tiled of stone floors laid in mortar including stacking of

2 serviceable materilas and disposal of unserviceable materials with all 310.00 SMT 50.94

Removing dry or oil bound distemper by a washing and scraping and

3 sand papering the wall surface smooth including necessary repairs to 525.00 SMT 11.97

scratches complete.

Scraping oil paint from steel and other metal surface and making the

surface even (with Hand Scraping.)

Dismantling santtary fittings like wash basin . W.C. pan Indian and

5 European type, flushing tank etc. including stacking the materials 13.00 EACH 429.66

with all lead and lift.

Dismentling C.I./GI pipes G.S.W.pipes abd A.C. rain water pipes with

6 fittings and clamps including stacking the materials with all lead and 80.00 Rmt 79.53

lift ( for any dia, of pipe)

Dismentalling of sheet roofing including ridges,hips ,valleys,

7 gutters,etc. with steel & RCC structure , stacking of serviceable 40.00 SMT 50.94

,materials with all lead and lift. (i) FRP Sheet

Dismentalling doors, windows, ventilators, etc. (Wood or steel

shutters including chowkhars, Architraves, Holdfasts and other

attachment etc. complete and stacking them within all lead and lift.

i) Not exceeding 3 Sq.M. in area

Demolition including stacking of serviceable materilas and disposal

of unserviceable materials with all lead and lift. (i) R.C.C. work

Brick work using common burnt clay building bricks having

crushing strength not less than 35 Kg./ sq.cm. in foundation &

plinth in cement mortar 1:6 ( 1 cement : 6 Fine sand ) (B)

Providing and laying C.C. 1:4:8 and curing complete excl. cost of

form work in :(A) Foundation and plinth

Providing and fixing window having extruded alluminum colour

powder coated section frame main outer size

63.5x38.10x1.95mm (of Jindal Section no4605,@ wt

Kg/Rmt), horizantal two/three track member size

61.85mmx31.75mmx1.20mm (of Jindal section no 8687 @ wt of

0.695kg/Rmt), vertical memberof size

61.85mmx31.75mmx1.30mm (of jindal section no 8758 @ wt of

12 0.659kg/mt) with sliding shutter of horizantal member size 7.10 SMT 1696.73

40mmx18mmx1.29mm (of jindal section no 8949 @ wt of

0.456kg/Rmt), vertical member of size40mmx18mmx1.29mm (of

jindal section of 8947 @ wt of 0.456kg/mt, section 8948 @ wt of

0.457kg/mt) with 5mm thick transparent bronze colour tinted

float glass with powder coated alluminum fittings and fixtures

and transparent silicon sealant glass fixing to frame as per details

Providing & fixing 35mm. Thick shutters for doors, windows &

clearstory windows including Indian teakwood frames 10cm X

13 7cm. Size including anodised alluminium fixtures and fastenings 2.20 SMT. 5285.45

including primer coat of approved quality & two coats of oil

painting etc.. complete. (i) Fully panneled

Providing & laying coloured glazed tiles 6mm. Thick in flooring,

treads of steps & landing laid on a bed of 12mm. Thick cement

mortar (1:3) (1 cement : 3 coarse sand) finished with flush pointing

in colour / white cement.

Providing & laying coloured glazed tiles of size 300 mm x 200 mm x

mm / 300 mm x 450 mm x 8 mm / bigger than size shown in skirting,

risers of steps & dedo on 10mm thick cement plaster 1:3 (1 cement :

3 coarse sand) and jointed with white cement slurry etc complete

Providing & laying POLISHED KOTAH STONE slab flooring over

20mm. (average) thick base of cement mortar 1:6 ( 1 cement :

16 coarse sand) or L.M. 1:1.5 laid over and jointed with grey cement 25.00 SMT. 1009.30

slurry including rubbing & polishing etc.. Complete. (A) 25mm

Providing 20mm. Thick double coat mala cement plaster on interior

brick / concrate work for plastering comprising of base coat of

12mm thick cement plaster in (i) Cement mortar 1:4 ( 1 cement :4

17 coarse sand)in rough finishing and 8mm thick top coat of cement 195.00 Sqm 287.84

mortar 1:2 (1 cement :2 coarse sand) finished with trovel incl.

scafolding, curing etc complete. up to floor two level.

Providing 20mm. Thick double coat mala cement plaster on interior

brick / concrate work for plastering comprising of base coat of

12mm thick cement plaster in (i) Cement mortar 1:4 ( 1 cement :4

18 coarse sand)in rough finishing and 8mm thick top coat of cement 310.00 SMT 316.09

mortar 1:2 (1 cement :2 coarse sand) finished with trovel incl.

scafolding, curing etc complete. above floor two TO THREE level.

20mm. Thick sand faced (Tipani) cement plaster on walls up to

height 10 meters above ground level consisting of 12mm. Thick

backing coat of C.M. 1:3 ( 1 cement : 3 sand ) and 8 mm. thick

finishing coat of C.M. 1:1 ( 1 Cement :1 sand) etc.. Complete.

Applying Two coats of Birla Or Asian acrylic lapi (putty) & two coats

of primer approved brand and manufacture on new wall surface to

20 give an even shade including throughly brushing the surface free 950.00 SMT 40.19

from mortar dropping and other foreign matter and sand papered

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an even

shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint (Apex) on

wall surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete.

Painting two coats on previously painted steel and other metal

23 surface with enamel paint, brushing to give an even shade including 150.00 SMT. 117.75

cleaning the surface of all dirt, dust and other foreign matter.

Polishing with french polish on previously polished wood and wood

based surface to give an even surface including cleaning, the surface

of all dirt, dust and sand papered smooth and including a coat of

Providing & fixing steel cupboard shutter of 18 gauge with steel

25 frame and fixing the frame with brick masonry including locking 50.00 SMT 2595.00

arrangement with 3 coats of approved oil paint etc., complete.

Providing cement vata (10cm X 10cm. Size) quarter round in cement

mortar 1:1 including neat cement finishing, watering etc.. Complete.

Carring out plinth treatment to post construction /existing structure

by spraying chemical solution for termite control treatment

including labour and material consistment with I.S.I specification.

Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II

Consentration Weight one percent is recommended i.e one litre

EC chemical emulsion with 19 liter give 1 % concrentration inclusive

of one litre chemical emulsion appication at the rate of 5 Litre

chemical / Sqm of surface is recommended as per I.S

P/F powder quoted GI sheet of Jindal or equivalent make having

width of 1050mm ( effective 1000mm) of 0.6mm thick of required

28 clour blue/or white with instakllation as per directied by EIC 150.00 SMT 600.00

complete etc . The rates are excluding cost of Purlins , Rafters and

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line and level as per

guidlines of IRC : SP 63-2018 etc. Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30cm length,30cm height and 15cm thick of

30 M200 grade concret as per approved design and including 135.00 Rmt 415.80

excavation for fixing in proper line and level,filling the joint with C:M

1:3 (1cement:3fine sand) etc complete.

Providing and fixing standard extruded alluminum section of size

63mm x 38.10mm x 1.2mm (of Jindal Section no. 2434,@ Wt.

31 Kg/Rmt) with colour powder coated alluminium frame for ventilation 2.00 SMT 1163.92

with 5mm thick frosted glass as per details etc complete for louvered

glass Ventilation.

Providing & Fixing EUROPEON TYPE W.C. commode of CERA make

OR Equivalent including necessary `P' or `S' trap, bends & having

plastic `ARAM' seat with cover fixing with screws with fixtures &

connection for flush cock etc., complete including C.I. Pipe

connection up to manhole chamber for G.F. & up to outside wall for

other floors with bends etc., complete in working condition as

directed by E.I.C.(with PVC flush Tank) Providing & fixing plastic seat

cover for wash down water closet with C.P brass hinges and rubber

buffers.(B) Black plastic seat and coverProviding and fixing 12.5 litres

low level flushing cistren with a pair of C.L.I. Or Mild Brakets,

complete with fittings such as symphonic arrangements, 15 mm.

nominal size brass ball valve with plythene float lever, G.I.chain (60

cm.) and pull union and couplings for connections with inlet, outlet

and over flow, pipes etc. including cutting holes in walls and making

good the same (over flow pipe to be measured and paid for

seperately) including Jet spray heavy duty with S.S. Braided hose

33 Providing & Fixing white / coloured porcelain flat back wall type

URINAL PAN of CERA make having size 590 * 375 *390 mm of

approved quality & make including waste coupling bends &

necessary outlet of 25mm.dia. G.I. Pipe connections including 5.00 Each 2508.00

providing brass stop cock ( pillar cock type ), PVC

connection,spreader & spreader pipes,brackets etc., completed as

directed by E.I.C.

34 Providing & fixing pillar tap capstan head, screw down high pressure

with screws, shanks and back nuts. 15MM DIA.

35 Providing & fixing C.P. brass waste for wash basin or sink (B)

36 Providing & Fixing Screw down bib taps of following size (B) Brass

chromium plated screw down bib tap of 15MM. Dia.

Providing & fixing CERA make wash basin with single hole for pillar

tap with C.I. or M.S. brackets painted white including cutting holes &

making good the same but excluding fittings. Vitreous China Flat

back of size 550mm. X 400mm. Colour as directed by EIC

Providing & fixing brass screw down stop tap (A) 15mm. Dia. 4.00 Each 203.79

Providing & Fixing 600X450mm. Bevelled edge mirror of superior

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing 4.00 Each 850.90

to wooden plug with C.P. Brass screws and washers.

40 Providing & Fixing C.P. Brass towel rail complete with C.P. brass

brackets fixed to wooden plugs with C.P. brass screws. (B) 600mm x 4.00 Each 610.32

Providing & fixing PVC SWR Nahani trap IS 14735 for drain - 100 mm

diameter with jali of the following nominal diameter of self cleansing

design with C.I. screw down or hinged grating including cost of 10.00 Each 608.11

cutting & making good the walls and floor

(100mm. Inlet and 50mm. Outlet)

42 Providing & fixing C.P. brass waste for wash basin or sink (B)

Constructing brick masonary chamber for under ground C.I.

Inspection chamber and bends with bricks having crushing strength

not less than 35 Kg/cm2 in cm. 1:5 C.I. Cover with frame (light duty)

455 mm. X 610 mm. Internal dimensions, total weight of cover with

frame to be not less than 38 Kgs. weight of cover 23 Kg. and wt. of

frame 15 Kg) R.C.C. tiop slab with 1:2:4 mix(1 cement : 2 coarse sand

: 4 graded stone aggregate 20 mm. size ) foundation concrete 1:5:10

inside plaster 15 mm. thickwith cementmortar 1:3 finished smooth

with a floating coat of neat cement on walls & abed concrete etc.

Providing & fixing to wall, ceiling & floor 10.00 Kg. F/Sq.cm. working

pressure polythene pipes of the following outside diameter, low

density complete with special flange compression type fittings, wall

clips etc.. making good wall,ceiling & floor.

Providing and fixing to wall ceiling and floor 10.0 kg. F/cm2 working

pressure polythylene pipes of the following outside dia. special

density, complete with special flange compression type fittings, wall

clips etc. including making good the wall ceiling and floor.

46 (a) 75mm. dia.pipe. 25.00 Rmt 277.46

47 (a) 110mm. dia.pipe. 75.00 Rmt 335.69

Providing, Laying and jointing in true line & level 15mm dia. U-PVC

pipe ( SCH-40) line including fittings of make as approved by EIC.

Pipe shall be fixed on the wall with the help of clamp at every two

48 meter C/C OR shall be concealed as directed including necessary 25.00 Rmt 71.93

fittings etc including testing of pipe and joints and fixing the same

with adhesive solvent including cost of all materials and labour etc

Providing, Laying and jointing in true line & level 25mm dia. U-PVC

pipe ( SCH-40) line including fittings of make as approved by EIC.

Pipe shall be fixed on the wall with the help of clamp at every two

49 meter C/C OR shall be concealed as directed including necessary 70.00 Rmt 90.93

fittings etc including testing of pipe and joints and fixing the same

with adhesive solvent including cost of all materials and labour etc

Providing. Laying and jointing in true line & level 32 mm dia.

U.P.V.C. pipe (Sch 40) for cold water in ground OR on wall including

fittings of make PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as

approved by EIC. pipe shall be fixed on the wall with the help of

clamp at every two meter C/C or shall be concelled as directed

including necessary fittings etc and fixing the same with adhesive

solvent including testing of pipe & joints including cost of all

materials etc complete.

Providing and fixing Gun metal check or non-return fullway wheel

valve.(A) 15mm dia.

Providing and fixing Gun metal check or non-return fullway wheel

valve.(C) 25mm dia.

53 c) 32mm.dia. valve. 2.00 NO. 311.61

Mazadoor Male ( For miscellaneous civil works as and when

required as directed by EIC.

55 Labour charges - Welder 5.00 Each 754.00

Carpenter 1st class for Repairing & Refixing of wooden cup boards

and other work directed by EIC.

Providing fitting and laying APP (Altactic Polypropylene Polymer)

modified prefabricated 5 layer, 3mm thick eater proofing membrane

black finished reinforced with glass fire matt consisting of a coat of

bitumen primer for bitumen membrane @ 0.40 liter/sqm by the

same membrane manufactured of density at 25 c, 0.87 - 0.89 kg/litre

and viscosity 70-160 cps. Over the primer coat the layer of

membrane shall be laid using butane torch and sealing all joints etc

and preparing the surface complete. The vital physical and chemical

parameters of the membrane shall be as under joint strength in

longitudinal and transverse direction at 23 C as 350 / 300 N/5cm.

Tear strength in longitudinal and transverse diraction as 60/80 N.

Softning point of membrane not less than diraction as 150 C. Cold

flexibility shall be up to 2 C when tested in accordance with ASTM, D-

5147. The laying of membrane shall be got done through the

authorised applicator of the manufacturer of ZEMBOO make : 3 mm

thickness. Applying of aluminium paint on APP membrane water

proofing system in uniformnly for reflection of sun rays to reduce

heat inside building.

Providing and laying cement concrete flooring 1:2:4 ( 1 cement :

coarse sand : 4 graded stone aggregate 20 mm. Nominal size) laid in

one layer finished with a floating coat of neat cement.( 50 mm thick

Pro. And fixing single layer water proof gypsum board 12.5 mm thick

sections using water proof board of size 1220 mm x 1830 mm x

mm suspended by GI suspender channel of size 25 mm x 3 mm with

intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm

center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at

457 mm c/c and perimeter channel A of size 20 mm x 27 mm x

mm x 0.5 mm at edges & drops incl.paper tap sand sofit cleat,

anchor fastener, scoch bolt connecting cleat,joining compound top

coat on ceiling incl.making necy.opening for light fitting,diffuser etc.

comp. as per detail drawing as directed

Providing & fixing stainless steel sink with drain board of approved

60 make & size of 1'-6" *1'-5" * 0'-7" incl. Waste couplin & waste pipe 1.00 No 1575.00

for water stand as directed.

Providing & Fixing heavy duty electric exhaust fan of sweep size

mm of ISI approved make as directed.

Steel work welded in built up sections,framed work including

cutting, histing, fixing in position and applying a priming coat of red

62 lead paint :-(A) In beams and joints channels angles, tees, flats with 35.50 Quintel 9018.30

connecting cleats as in main and cross beems, hip and jack reffers,

purlins connected to common raffers and the like.

PROVIDING AND FIXING IN POSITION 72 +-3 SPIRAL TURNS IN EACH

9 MTR OF RECOMMENDED STRETCHED (LAID) LENGTH & 750 MM

EFFCTIVE DIA (AFTER LAYING) HOT DEEP GALVANIZED CROSS SPIRE

TYPE RAZOR TAPE CONCERTINA COIL WIRE USING A CENTRAL CORE

WIRE HIGH CARBON SPRING STEEL (HIGH TENSILE WIRE) MADE UP

OF 2.6 MM DIA AS PER IS: 4454, PART-1, GRADE-II HAVING

MINIMUM GALVANIZING OF 230 - 250 GMS PER mm2. AROUND

WHICH A TAPE OF RAZOR SHARP BARBS STRIP OF 0.5 MM THICK &

19 MM WIDTH CONFORMING TO IS: 513 DD QUALITY HAVING

63 MINIMUM GALVANIZING COATING OF 12 MICRONS WITH SERIES OF 220.00 RMT 450.00

BARBS PUNCHED ALONG THE LENGTH AT REGULAR

INTERVAL.(APPROXIMATELY 160 BARBS PER RUNNING METER OF

CONCERTINA COIL IS MACHINE CRIMPED WITH 4 TO 5 NO OF CLIPS

PER EACH SPIRE MADE UP OF STEEL(SS304). INCLUDING FIXING OF

CONCERTINA COIL ON 4 RUNS OF SUPPORT FIXED THROUGH OUT

THE COMPOUND WALL WITH THE HELP OF REQUIRED GI U-NAILS /

SPLIT PIN, SCAFFOLDING ETC; COMPLETED AS PER DETAILD

SPECIFICATION & AS DIRECTED BY ENGINEER IN CHARGE. 4 NOS OF

RUNS OF SUPPORT OF RBT WILL BE PAID IN SEPRATE ITEM.

PROVIDING AND FIXING IN POSITION SUPPORT OF RBT (RAZOR

BARBED TAPE) MADE OF 2.6 MM DIA AS PER IS: 4454, PART-1,

GRADE-II HAVING MINIMUM GALVANIZING OF 230-250 GMS PER

SQMM. FIXED ON ANGLE SUPPORT OF COMPOUND WALL WITH THE

HELP OF GI U-NAILS / SPLIT PIN INCLUDING SCAFFOLDING ETC;

COMPLETE AS DIRECTED BY ENGINEER IN CHARGE.

Painting two coats (including priming coat) on new steel and other

metal surfaces with enamel paint, brushing interior to give an even

shade including cleaning the surface of all dirt, dust and othr foreign

LOW HEIGHT PARTITIONS OF 1200 MM TO 1650MM HEIGHT

'Providing and fixing Aluminum partitions of 60 to 70 mm thickness

having framework of 1.2mm thick aluminum extruded section and

removable tile base system including necessary wire arrangement

system as per specification & as directed by E-I-C.

Supplying, Providing & fixing work surface for staff tables made of

25mm Pre-laminated MDF Board with one side Pre-lamination and

on other side 0.7mm thick lamination as per specification & as

directed by E-I-C. The top is provided and fitted with all kind joinery

and fitting complete. The table tops in work stations /cubical should

67 be mounted with necessary bracket like end support, corner, 31.00 SMT 2550.01

cantilivered as per requirement of layout. The entire table top

should be provided with gable ends & gable ends should be attached

to the partitions and table with the help of necessary brackets.

Supplying, Providing & fixing in position standard table having top

surface of minimum 25mm thick MDF board with one side Pre-

lamination and other side 0.7mm thick lamination as per

specification & as directed by E-I-C, having necessary provision for

wire management data/computer/telephone cabling. Table having

drawer Unit has size 400x450x600mm as per specification and

design approved by Engineer Incharge. All supporting system should

be matching with modular partition framing and final finish. Rate is

inclusive of key board, tray and CPU trolly as required.

Supplying, providing & fixing side and back storage cabinate having

clear inside storable space minimum of 380mm depth. It should be

70 made from 18mm Pre-Laminated MDF board with one side Pre- 24.00 SMT 8956.40

lamination an other side 0.7 mm thick laminate as per specification

and as directed by the E-I-C.

Supplying, providing & fixing key board tray as per specification and

directed by E-I-C.

Supplying, providing & fixing CPU trolley as per specification and

directed by E-I-C.

Supplying, providing & fixing Pedestal unit below work stattion top

surface having minmum size of 400mm x 450mm x 600mm height

73 made up of equivalent material of modular partition and work 24.00 No. 3725.65

station. The pedestal Unit shall be as per approved specification &

design as directed by E-I-C.

Providing and filling AAC blocks including proper watering and

compaction in sunken areas all complete as per drawings and as

directed by the Engineer-in-chargein-Charge.

Half brick masonary in common burnt clay building bricks having

crushing strength not less than 35 Kg./Sq.cm. in cement mortar 1:4

75 (1cement :4 coarse sand) in super structure above plinth level above 35.00 SMT 680.08

floor two level. With CONVENTIONAL BRICKS

Providing & Laying cement concrete M-200 and finishing smooth

with curing etc. complete including the cost of form work but

excluding the cost of reinforcement for R.C.C. work in (II) slab having

76 more than 10cm & up to 13cm. thickness. (For floor two to three 6.00 CMT 7206.99

level). Note: Cement consumption rate diff. added Rs.348.14 for

ordinary concrete to M-200.

Providing & Laying cement concrete M-200 and finishing smooth 4.50 CMT. 7976.74

with curing etc. complete including the cost of form work but

excluding the cost of reinforcement for R.C.C. work in (A) Beams iii)

77 Having cross sectional area more than 0.08 Sq.M. & up to 0.12 Sq.M.

(Above floor two to three level) Note: Cement consumption rate

diff. added Rs.348.14 for ordinary concrete to M-200.

Providing TMT bar FE 500D reinforcement for RCC work including 1000.00 KG. 78.70

78 bedding binding and placing in position complete above floor two to

Providing & applying Dr.fixit( pidilite)LW+ OR equivalent, In RCC 20.00 Ltr 78.00

79 Work using 200ml per bag as directed & instructed by E.I.C

Providing & Laying Water Proofing Treatment in Sunken Portion

of W.C., Bathroom, Terrace etc. by applying Cement Slurry mixed

with water proofing chemical ,as per manufacturer's

specifications of approved make as under.

Providing & laying 20 to 25mm thick, both faces polished kotah

stone with all edges machine cut up to 450mm width and of

81 required length (only one piece to be used ) of approved quality 40.0 SMT 1009.30

for cupboard shelves including fixing the same in masonry

wall/ RCC work.

Point wiring for light with 2-1.0 sqmm & earthwire of 1.0 sqmm

(green) both are of ISI marke approved make PVC insulated

multistrand copper wires, in existing pipe duly erected complete

with 6A Modular type switch/bell push & accessories of approved

make and earth continuty of following type, erected on

PVC/Metallic box covered with appropriate front plate modules

erected concealed in wall/ceiling. (Loop point include)(a) with

medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete. Cat. II

Point wiring for looped plug with 6A Modular type switch and

pin socket erected on PVC/Metallic box covered with appropriat

front plate modules erected concealed in wall/ceiling with

following type of accessories of approved make. (B) Single

mounting base-frame & Textured/Metallic front plates.Cat. II

Providing following type of Modular Type Accessories mounted

with pvc / metallic box, single mounting base frame covered with

84 textured / metallic front plate , modules erected with necessary 20.0 Ea. 124.00

connection. As desired by Engineer In charge (3) One nos. 6Amp

pin plug. Cat. II

Providing following type of Modular Type Accessories mounted

with pvc / metallic box, single mounting base frame covered with

textured / metallic front plate , modules erected with necessary

connection. As desired by Engineer In charge (8) Modem Jack for

Computer Open RJ-45 Cat. II

Providing following type of Modular Type Accessories mounted

with pvc / metallic box, single mounting base frame covered with

86 textured / metallic front plate , modules erected with necessary 20.0 Ea. 139.00

connection. As desired by Engineer In charge (10) 6/16 Amp.

Universal socket.Cat. II

Providing following type of Modular Type Accessories mounted

with pvc / metallic box, single mounting base frame covered with

87 textured / metallic front plate , modules erected with necessary 4.0 Ea. 128.00

connection. As desired by Engineer In charge (20) Modular

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling

88 erected with necessary PVC fittings & Junction boxes fixed with 100.0 Mtr. 33.00

adhesive solution & Clamps with following dia of pipes, in

approved manner as directed (b) 25 mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

89 conductor FRLS PVC insulated stranded wire of green colour for 50.0 Mtr. 82.00

earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm

Supply and laying of Approved make Lan wire cat-6 for

90 Data & telephone cabling as per direction of 150.0 Mtr. 47.00

engineer incharge.

Supply, installation, Testing and Commissioning of Approved

make 2 X 28W T-5 light fixture with lamp complete with all

91 accessories as required, as per drawing, as per approval of 12.0 Ea. 1000.00

Architect / Client and as per direction of engineer incharge.

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 1Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses with company mark/name

engraved or embossed 120 to 300 V,Power Factor more than

0.95, THD < 10 %, CCT 5000 K to 5700K, Uniformity ratio >0.45,

Luminaire efficacy> 85 lumens/watt . LED driver efficiency >

%. CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/

BridgeLux (U.S.A.) make LED used for luminaire. ( Each fittings

required LM-79 & LM-80 certificates) (A) Street Light / flood light

(IP-65), Surge -4KV © Above 36 watts Cat III

Providing M-150 / 1:2:4 cement concrete foundation & 70 % PCC

from bottom including excavation for the pole of size 45 x 45 x

100 cms. Deep in below ground level with plinth of 45 cms x

93 cms (or 45 cms dia x 45 cms) high upper ground level with 10.0 Ea. 801.00

necessary curing and finishing in approved manner.

( for 4 & 6 mtr pole)

Supplying and erecting SMC Box 12mm thick HYLAM/syntex

make on existing pole.

Supplying & erecting confirming to IS - 2713 (Part-II)

Manufacturing process of steel pole should be as per IS

specification. Basic steel tube should be ISI Marked. Pole should

95 be painted by one coat of Zinc comet Primer and two coat of 10.0 Ea. 3950.00

Aluminium /approved paint to be erected on / in existing

Foundation. The length of poles are as below.(A) 4.5 mtr. Long

tubular Steel pole

96 (iii) Add Extra for PU base primer and PU Paint on pole. 10.0 Ea. 400.00

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured

97 copper cable 1.1 KV grade to be erected as directed of following 200.0 mtr 721.00

size. N) 4 core 16 Sq. mm

Brick work using common burnt clay building bricks having

crushing strength not less than 35 Kg./ sq.cm. in foundation &

plinth in cement mortar 1:6 ( 1 cement : 6 Fine sand ) (B)

A ESTIMATED COST - RS = ₹

B Bidder’s Offer (+ / -) in % ------------- [B]

C Grand Total C = A +/- (A*B)]

C Grand Total C = A +/- (A*B)]

D Add 1% Welfare cess on C 1.00%

E Total including Welfare Cess ----- D = C + D -------------------------------

F Goods & Service Tax F = E x GST% i.e. 18%as applicable on the date of tender in amount

G Grand Total including Welfare Cess & GST ---- G = E + F ----------

G Grand Total including Welfare Cess & GST ---- G = E + F ----------

Final Offer (in Rs.)

Final Offer (Rs. In Words)