JOB WORK

Amount

Provn of Exhaust fan and ancilliary work at Bldg No P-3 (Cook House) at Mil Stn Barabanki under GE (East) Lucknow (I) Material and labour for point wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic ISI PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / fan point controlled by one, one way switch 06 Amp all as directed. -04 Per Point (ii) All as per serial item No 01 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp. - 01 per point (iii) All as per Serial Item No 01 here-in-before but point wiring with 2.5 Sq mm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed. - 05 Per Point (iv) Supply and fix switch piano flush type, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed. Make : Havells - Reo or equivalent in Anchor - Penta PC / Legrand. - 05 Each (v) Supply and fix socket outlet 2 in 1, 5 pin, 06 Amp, flush type, 230 volt complete all as specified & directed. Make : Havells - Reo or equivalent in Anchor - Penta PC / Legrand. -01 Each (vi) Supply and fix switch socket combination outlet 2 in 1, 3 pin, 06 Amp and 16 Amp flush type, universal, 230 volt, four hole complete all as specified & directed. Make : Havells - Reo or equivalent in Anchor - Penta PC / Legrand. - 05 Each (vii) Supply and fixing decorative LED lighting fixture with extruded aluminium, heat sink, environmental friendly, energy efficient ready to use suitable for 4' LED tube complete all as specified and directed. Make: Havells Cat Part NO REGALBATTENT8UPTO1X22WSSBSWH or equivlent in CG/Philips. - 02 Each (viii) Supply and fix in replacement of single side connection LED T8 tube rod 20 Watt with PC body and diffuser, >2000 lumen, 6500K of four feet long into existing T8 conventional fluorescent tube light fitting after changing the necessary electric connections as required at site complete all as directed. Make : Havells / Philips / Crompton. - 02 Each (ix) Supply and fix ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed. - 04 Each (x) Supply and fix exhaust fans AC single phase 230/240 Volts of size 450 mm. Sweep with louvers, 900rpm, min free air delivery 3700 CMPH complete all as directed. - 02 Each (xi) Cutting walls of any type, making holes for fixing of exhaust fan any size or sweep and making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed. - 02 Each (xii) Dismantling floor hearth or wall tiling including cement mortar bedding (buqmmt not backing ) removing serviceable tiles and rubbish off the premises. - 0.90x sqmm Continued to next coloumn

(xiii) M/L for 20mm thick Black Granite (of any type) tiles machine cut, in skirting / dado laid over cement screed & jointed with grey cement slurry and pointed with white/black cement with admixture of pigment to match the shed of granite stone including grinding and polishing, bedded laid over 15mm thick screed bed in cement mortar(1:4) & jointed with grey cement slurry & pointed with white cement admixture of pigment to match the shade of stone including grinding and polishing complete.- 9.03 Sqmm (xiv) M&L for mild steel TMT or twisted bars 10 mm dia and over as in reinforcement cut to length, bent in shape required including cranking, bending, spirally hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc. - 55 Kgs (xv) M&L for RCC 1:2:4 type B1 (using 20 mm graded agg) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like - 0.25 cum (xvi) M&L for form work to soffits of roof slabs, floor slabs and similar work n exc 200 mm thick for fair finished surfaces (flat). - 4 Sqm (xvii) S & F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm including 40mm dia PTMT waste coupling and bracket complete all as directed and as spcified. - 01 Sqmm (xviii) S&F for down pipe of polyethylene of low or high density or PVC, 32 mm dia, for sink - 06 Each - 01 Each (xix) Taking down cement or cement lime plaster any description and and in any position including raking out joints hacking for key & scrubbing down with water etc complete. - 08 Sqmm (xx) M&L for Glazed coloured ceramic tiles in vertical surface 450x300x7 mm thick over 15mm thick rendering in CM (1:4) set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dados all as specified and as directed. - 08 Sqmm (xxi) M&L for complete removal of existing treatment from old / new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of 3mm thick wall care putty on walls, complete all as specified. - 44 Sqmm (xxii) M&L for two coats of white wash including preparation of new/old surfaces as on ceillings all as specified and as directed by the Engr-in-Charge - 50 Sqmm (xxiii) M&L for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 all as specified. - 01 Sqmm

HS ASSOCIATES

NANAK ELECTRONICS