RequiredExperience with Government
RequiredAnnual Turnover
RequiredOEM Authorization Certificate Bid to RA enabled No Crawler Hydraulic Excavator ( 1 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Generic Parameters Conforming IS/ISO 7135:2009 Hydraulic Excavator (Crawler) Yes Yes Make - * Model - * 1/10 Type of the excavator Crawler * Operating mass 1640 More than 1640.0 Or higher Shipping mass 1715 More than 1715.0 Or higher Engine manufacturer and model - * Ignition type Diesel Diesel Type of cycle 2 Stroke 2 Stroke Aspiration Naturally aspirated * No of cylinders 3 * Bore 67 * Stroke 73.6 * Displacement (cc) 778 * Max Engine horsepower 13.3 More than 13.3 Or higher Maximum Engine torque (Nm@rpm) 9.9 9.9 Engine cooling system Liquid cooled * Type of fuel Diesel * Starter type - * Electrical system voltage (in volts) 12 * Bucket capacity to handle material of density 0.04 0.04 ISO net flywheel power at given engine speed (hp@rpm) 13.3 More than 13.3 Or higher Maximum swing speed 8.7 8.7 Reach at ground level 2310 2310.0 Depth reach 1910 More than 1910.0 Or higher Travel speed 2.2 2.2 Gradeability (degree) 30 More than 30.0 Or higher Force at bucket curl at the Tip 15.2 15.2 Stick crowding force 8.8 * Ground Pressure 0.25 * 2/10 Operating weight 1640 More than 1640.0 Or higher Draw bar pull 0 * Standard Boom 0 0.0 Standard Arm 0 0.0 maximum digging depth 2310 More than 2310.0 Or higher maximum digging Reach 2310 More than 2310.0 Or higher Rated Lift Capacity 280 280 fuel tank capacity 18 18.0 Certification Vehicle Certification ARAI/VRDE/ICAT No * If No
Requiredmention the name of Vehicle Certification agency - * Vehicle Certification name and date - * Compliance with pollution standards
Requiredsafety standards of components and road worthiness as per CMVR rules Yes * Availibility of test report for the product from Any ILAC/NABl accredited/central government lab to be furnished to buyers on demand Yes * Responsibility of Registration with RTO Yes * IS/ISO 6165 : 2006 Earth moving machinery - basic types - Identification and terms and definitions Yes * IS 11114 : 2006 Earth- moving machinery - Definitions of dimensions and codes: Part 2 base machine Yes * IS 11114 : 2006 Earth- moving machinery - Definitions of dimensions and codes: Equipment and attachments Yes * 3/10 IS13116 : 2006 Earth- moving machinery -Engine Test Code - Net power Yes * Construction Parameters Overall length 3575 * Overall width 1240 * Overall heigth 2250 * Overall transport length 3575 * Width of upper structure 980 * Track overall length 1585 * Track overall width when retracted 990 * Track overall width when extended 1240 * Track shoe width 230 * Centre to centre - idler to sprocket 0 * Upper structure ground clearance 0 * minimum ground clearance 145 More than 145.0 Or higher Tail swing radius (standard) 620 * Tail swing radius (counterweight) 0 * Backfill Blade height 265 * Backfill blade width 1240 * Backfill blade rise above ground 260 * Backfill blade dig depth 180 * Maximum Cutting height 2440 * Maximum Loading height 2440 More than 2440.0 Or higher Minimum Loading height 2440 2440.0 Maximum vertical wall digging depth 1910 * Hydraulic pump system type - * Hydraulic pump flow at given pressure (L/hr) 0 * 4/10 Hydraulic pump flow at given speed (L/hr) 0 * Hydraulic system fluid capacity 10 * Hydraulic system output 16 * Cooling systsem fluid capacity 5 * engine crankcase fluid capacity 5 * pump drive fluid capacity 16 * Swing reduction 1425 * Swing circle lubrication - * Swing lock - * swing drive fluid capacity 0 * Filteration system - * Fuel filters - * Air Cleaners Yes * Type of Steering Manual * Type of braking system Hydraulic * Type of final drive Single reduction * final drive fluid capacity 16 * Type of Track - * Track dimensions 230 * Ground Contact area 180 * Number of shoes on each side 2 * Number of carrier rollers 4 * Number of track rollers 4 * Cab height 1540 * Crawler track height 760 * Clearance height under upper structure 180 * Undercarriage overall width 990 * Shipping height 2340 * Shipping height with guard rail 2340 * 5/10 Shipping length 3545 * tail swing radius 1425 * Length to centre of rollers 100 * Counterweight clearance 50 * Right-side upper structure distance from axles of rotation 620 * cab width overall 900 * Track gauge with track extended 1240 * track gauge with track retracted 990 * Crawler overall length 1650 * Sprocket axis to axis of rotation (in degress) 58 * Upper structure rearmost distance from axis of rotation 150 * Maximum dumping height for shovel 2440 * Length of level floor cut 1200 * Minimum level floor radius 58 * Muffler with rain cap Yes * Fuel Consumption for Earthwork application 2.5 * Maximum dig radius 2310 * Dig radius at groundline 2310 * Maximum dig depth 2310 More than 2310.0 Or higher Vertical straight wall dig depth 1910 * Dump height 1910 More than 1910.0 Or higher Overall reach height 1910 More than 1910.0 Or higher Bucket rotation 25 * Arm digging Force 15.2 * Bucket Digging Force (ISO) 15.2 More than 15.2 Or higher Stick Digging Force 15.2 15.2 6/10 (ISO) Bucket Digging Force (SAE) 15.2 * Stick Digging Force (SAE) 15.2 * Fully enclosed steel cabin with safety pipes window locking service doors and adjustable cushion seal Yes * Service hour meter Yes * Complete Instrumentation Yes * Starter key switch Yes * 2 working light and cabin light Yes * Electric Horn Yes * Parking brakes Yes * Emergency shut off Yes * Cabin/canopy :All round visible cabin
RequiredWith easy Walk Through Access Yes * Instrument Panel Yes * Cabin Instumental panel with audio indicators Yes * Cabin Instumental panel with visual indicators Yes * Seating Plan: Co- Adjustable driver seat with one helper seat Yes * Doors:-Front door with fixed toughened glass & locking mechanism with wiper Yes * Glasses:-Front wind screen
Requiredrear glass in two pieces glass Yes * Paint:Standard automobile paint to the exterior body as per CVMR rules Yes * Rear view large convex mirror Yes * Front screen wiper Yes * 7/10 Front and rear horn Yes * Number of roller 6 * Lift Path Yes * Cabin Entry and Exit Yes * Operation Control Yes * Length Without Attachment 1500 * Performance Parameters ISO net engine power (HP@rpm) 13.3 * Maximum travel speed (high) (km/hr) 4.3 * Maximum travel speed (low) (km/hr) 2.2 * Braking performance - * Tipping Load (kN) 0 0 Digging Tool used Shovel * maximum force by Shovel/hoe/clamshell using arm cylinder (kN) 15.2 * maximum force by Shovel/hoe/clamshell using bucket cylinder (kN) 15.2 * Warranty time 1 * Operating hours during warranty period 1600 1600.0 Battery warranty 1 * No Of Free services 5 * Transportation charge (in Rupess) 75000 * Maintenance cost for first 5000 Hrs (in Rupees) 240000 * Excavator Self propelled machine on crawlers having an upper structure capable of 360 degree swing and with mounted equipment which is primarily designed for excavating with bucket without movement of undercarriage during Yes * 8/10 work cycle Work cycle normally compromised excavating
Requiredelevating
Requiredswinging and discharging of material Yes * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
