Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.5 LAccepted-AOC | L1 | Accepted-AOC ok |
Tender Value
₹31.7 L
EMD Value
₹63,380
Closing Date
21 Feb 2022, 5:00 pmClosed
Executive Engineer Water Services Division Jagadhr
Executive Engineer Water Services Division Jagadhri
Providing 07 Nos. Rain Water Harvesting Injection Bore well Structure in Village Sudhail
2022_HRY_206955_14
388-400/14G dated 28.01.2022
Open Tender
Agricultural or Forestry
Item-rate/Agreement basic
105 days
Executive Engineer Water Services Division Jagadhr
As per bid documents
3 documents required · 3 mandatory
₹2,500
₹63,380
Yes
31 May 2022
14 Feb 2022
22 Feb 2022
14 Feb 2022
21 Feb 2022
14 Feb 2022
14 Feb 2022 - 21 Feb 2022
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. All kinds of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level. 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size).
Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
10 mm cement plaster of mix 1:5 (1 cement: 5 fine sand
Drilling of 250mm dia of bore through bokky type instrument 0-50m BGL(PH035)
Supplying, assembling, lowering and fixing in vertical position in bore well Unplasticised PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia
Providing & lowering of well casting UPVC pipe 400mm dia specification as per IS 12818-2010
M.S. socket 200 mm dia ( B2027)
Jali, Rivet, Brass , Disco, solvent and cap
Supply, testing and lowering of ISi marked all welded stainless steel screen (SS304) cage Type V-Wire Wound Screens in bore wells conforming to IS:8110 & compositions of material as per IS:1012, outer dia 221 mm equivalent thickness required as per code, tensile load 14000 kg minimum and ring thickness as per IS code of following sizes: Stainless Steel Screens 200x8.0x0.50mm
Development of bore well by machine including labour & generator
Providing and placing in horizontal layers filtering media screened washed and cleaned as described below - (Top Layer ) Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4 mm with uniformity coefficient 2.0 to 3.0) approved source
layer of charcoal
Providing and placing in horizontal layers filtering media screened washed and cleaned as described below - Bajri (coursed) screened and washed graded from 20 mm to 25 mm (from approved equivalent quarry)
Providing and placing in horizontal layers filtering media screened washed and cleaned as described below - Broken stone, screened, washed and graded from 50 mm to 75 mm (from approved equivalent quarry) (Bottom layer)
Providing & fixing six sides Tee 200 mm dia
Providing & fixing PVC 400mm x 200 mm Dia
Providing & fixing End cap 400mm
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .