Providing, installation, testing and commissioning of submersible pumpset 2000GPH X 100 Mtrs Head along with allied works at pumping station Lam.

Amount

Providing, installation, testing and commissioning of submersible pump set 2000GPH X 100 MH coupled with suitable motor at pumping station Lam. The pumping Machinery should conform to relevant ISO with all latest amendments. The job includes installation of pump set by way of carriage/ shifting of pumping machinery by MT and HL at site, along with allied electro-Mech equipment. Fabrication of GI pipe nipple of 50 mm dia with threads at one end & MS flange at other end & fastening the threaded end of nipple with the delivery of pump. Providing/fabrication of 01 No. U shaped tie rod clamps fabricated out of 40 mm x 6mm MS flat. Fitting of tie rod clamp to the submersible pump with the help of heavy duty bolts and nuts welded on the sides of the clamp. Filling of distilled water inside the submersible motor for cooling the motor windings. Coupling of pump and motor, checking of alignment of pump and motor. Fabrication/fitting of MS clamps 50 mm dia.-01 sets for holding submersible pump & nipples. Coupling of pump motor set with the help of coupling pulley. Lowering of pump motor set along with GI column pipe and submersible cable into the bore well with the help of chain pulley block, ropes & skilled/unskilled labours. Providing and fitting of Automatic control panel of suitable capacity for operation of submersible pump motor set mounted with safety devices such as single phase preventer, high voltage/low voltage, under load/overload protection. Providing/ fitting of submersible cable 4 mm sq-50 mtrs (approx.) for making connection from control panel to motor with complete thimbling and insulation. Checking continuity of complete circuit. Complete job includes cost of material, labour charges, welding/fitment charges and carriage /shifting charges.

M/S RAGHUNATH MECHANICAL AND ELECTRICAL ENGINEERING WORKS

G S ENGINEERING WORKS