Building Works

Item RateIn

(with brief specification and reference to book of Quantity Unit Amount

No. Figure

specifications)

[1] Dismentaling tiled of stone floors laid in mortar 417.00 Sqm 46.77

including stacking of serviceable materilas and disposal

of unserviceable materials with all lead and lift.

[2] Excavation for foundation upto 1.5 m depth including 34.00 Cum 117.08

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead (A)

Loose or soft soil

[3] Providing laying and jointing in true line and level 260.00 Rmt 72.65

15mm dia. U.P.V.C. Pipe (SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

[4] Providing laying and jointing in true line and level 86.00 Rmt 91.84

25mm dia. U.P.V.C. Pipe (SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials. [B] 25mm dia.

[5] Providing and fixing Handle valve of approved brand 26.00 Nos 239.37

(A) 15mm dia.,

[6] Providing and fixing Handle valve of approved brand 13.00 Nos 414.10

(C) 25mm dia.,

[7] Constructing brick masonry chamber for under ground 6.00 Nos 2932.93

C.I. Inspection chamber and bends with briocks having

croshing strength not less than 35Kg. Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions, total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

frame 15Kg.) (R.C.C. top slabe with 1:2:4 mix (1-cement

:2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete (i) Inside dimensions 455mmx 610mm and

450mm deep for single pipe line.

Description of Item

Item RateIn

(with brief specification and reference to book of Quantity Unit Amount

No. Figure

specifications)

[8] Providing and fixing pre-cast Rubber Dye / steel Dye 315.00 Sqm 686.90

inter locking concrete block 60mm thick with grade of

concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming to

IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line

and level as per guidlines of IRC : SP 63-2018 etc.

[9] Refixing of pre-cast Rubber Dye / steel Dye inter locking 1400.00 Sqm 55.55

concrete block including Cleaning and 100 mm Sand

layer for levelling and filling the joint with sand in

proper line and level as per guidlines of IRC : SP 63-

2018 etc. Complete.

[10] Dismantling santtary fittings like wash basin . W.C. pan 60.00 Each 394.51

Indian and European type, flushing tank etc. including

stacking the materials with all lead and lift.

[11] Removing and scraping of old deteriorated plaster of 324.00 Sqm 18.94

any thickness fromm wall / R.C.C member including

stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift

[12] Carry out Acrylic polymer modified elastomeric water- 40.00 Sqm 1232.06

proofing membrane coating treatment for Toilet block

shaft upto depth 0.6 m as per following : Cleaning of

concrete surface / plaster surface with grinder, blower,

chisel etc. and make it free from dust, dirt, frost etc.

Make an Angel Fillet at joint of floor and Periphery wall

with mixing ratio of 1 part Cement and 3 part Sand

admixed with 5 Ltr. Latex based Mortar and screed

modifier & bonding agent of best quality manufacrurer

per Cement bag. Apply Acrylic polymer modified

elastomeric waterproofing membrane coating on shaft

wall as well as bottom of best quality manufacrurer on

pre wet concrete surface as per manufacturer standard

specification.Second coating shall be applied after

hour of first coating. Treated surfaces must be kept

moist for a minimum of 48 hours using continuous

water spray & Waterponding for slab shall be executed .

After doing all above treatment, make 12 to 15 mm

plaster on all periphery wall upto 0.6 m depth and avg.

50 mm thick screed on floor. For plaster mixing ratio

will be 1 part cement: 2 part sand: 125 ml Integral

waterproofing liquid admixture of best quality

manufacrurer per cement bag and required water, For

making screed mixing ratio will be 1 part Cement: 2 Part

Sand: 4 Part 10 mm down course aggregates: 125 ml

Integral waterproofing liquid admixture of best quality

manufacrurer per bag of cement and required water etc.

complete as per instruction of Engineer In Charge. [Only

plan area will be measured for payment]

Description of Item

Item RateIn

(with brief specification and reference to book of Quantity Unit Amount

No. Figure

specifications)

[13] Providing and laying 60 x 60cm Antiskid Vitrified tiles 8 40.00 Sqm 1073.13

to 10 mm thick in flooring treads of steps and landing

laid on a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand) finishing with flush pointing in

white cement.

[14] Providing and layingCeramic tiles 6mm thick in skrting 202.00 Sqm 981.50

risers of steps and dedo on 10mm thick cement plaster

1:3 (1-cement : 3- coarse sand) and jointed with white

cement slurry

[15] Providing and fixing wash basin with pedestal of std. 12.00 Nos 1818.00

Height with single hole for pillar tap with C.I or M.S

brackets painted white including cutting cutting holes

and making goods the same include. C.P. brass waste

and waste pipes (A) Vitreous china. (II) Flat back

washbasin 550 mm x 400 mm size (I) in white or colour

[16] Pro. & Fix. wash down water closet (anglo indian W.C 12.00 Nos 3171.40

pan of Vitreous china Patern.) with integral" p " or " s "

trap and PVC flushing cistern with a pair of C.L.I. Or Mild

steel Brackets, complete with fittings such as lead value

siphon, 15 mm. Nominal size brass ball valve with

polythene float, C.P. Brass handle unions and couplings

for connections with inlet, outlet and over flow pipes,

mm. dia. flush bend including cutting holes in walls and

making good the same connecting the flush bend with

cistern and closet etc comp incl plastic sheet cover

including jointing trap with pipe in cm 1:1 (a) Vitreous

china in white or color

[17] Providing & Fixing Premium quality approved make like 12.00 Nos 5214.76

Jaquar / ESSCO or equivalent Flush Valve dual flow

mm size having Conceled body with Exposed shut of

provision and 100 mm square plate (3 to 6 liter per

flushing)including labour, material, trasportation

etc.complete as directed by engineer incharge.

[18] Providing and fixing PVC SWR Nahni trap IS 14735 for 36.00 Nos 558.36

drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I

scread down or hinged grating including the cost of

cutting and making good the walls.

[19] Providing & Fixing Premium quality approved make like 24.00 Nos 3185.67

Jaquar / ESSCO or equivalent Bib cock with wall flange

including labour, material, trasportation etc.complete as

directed by engineer incharge.

[20] Providing and fixing 600mm x 450mm bevelled edge 12.00 Nos 833.73

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge with

C.P. brass screws and washers.

[21] Providing and fixing C.P. brass towel rail comlete with 12.00 Nos 603.19

C.P. brass brackets fixed to wooden plugs with C.P. brass

scews (B) 600mm x 20mm size.

Description of Item

Item RateIn

(with brief specification and reference to book of Quantity Unit Amount

No. Figure

specifications)

[22] Providing and fixing pillar tap, capstan head, screw 24.00 Nos 308.73

down high pressure with screws, shanks and back nuts.

(i) 15mm dia.

[23] Providing & Fixing Premium quality approved make like 12.00 Nos 2365.05

Jaquar / ESSCO or equivalent Angular stop cock with

wall flange including labour, material, trasportation

etc.complete as directed by engineer incharge.

[24] Providing, laying and jointing in true line and level 75 36.00 Rmt 714.46

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size

mm diametre x 149 mm length x 145 mm heigh at every

2000 mm center to center or shall be concealed in walls

as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of

all materials.

[25] Providing, laying and jointing in true line and level 110 60.00 Rmt 835.15

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size

mm diametre x 149 mm length x 145 mm heigh at every

2000 mm center to center or shall be concealed in walls

as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of

all materials.

[26] Providing and fixing to wall ceiling and floor 10.0 Kg. 450.00 Rmt 336.24

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor (G)110

[27] Providing and fixing MS Z clamp on Wall or celling for 96.00 Nos 75.75

Pipe Fitting including all type necessary fittings and

accessory etc. completed as per directed engineer in

[28] Providing & Fixing Premium quality approved make like 12.00 Each 10136.36

Jaquar / ESSCO or equivalent Wall mixer having 3-in-1

system with provision for both hand shower & over

head shower complete with 115 mm long bend pipe,

connecting legs and wall flange (excluding hand and

over head shower) including labour, material,

trasportation etc.complete as directed by engineer

Description of Item

Item RateIn

(with brief specification and reference to book of Quantity Unit Amount

No. Figure

specifications)

[29] Repairing to Door / Window including dissembling 143.00 Each 567.79

from frame, wroughting, providing patti, angles,

replacing / repairing stoppers - aldrops - handles etc.

for proper fixing in to frame hole etc. complete for

smooth operation and proper utilization including

assambeling and Refixing of the same and Painting one

coats (excluding priming coat) on previously painted

wood and wood based surface with enamel paint, to

give an even shade including cleaning the of all dirt,

dust and other foreign matter as directed by Engineer-in-

[30] Applying general insecticide pest control treatment to 908.00 Sqm 89.28

floors, cupboards etc including labour materials etc.

complete. Using Imidacloprid 30.5 SCas Per IS 6313 part

-II((0.075% concentration by mass) is recommended

10.5ml chemical diluted with 5 liters of water

application 0.5 litre chemical /Sqm of surface is

recommended as per I.S.

[31] Providing and applying Elastomeric Acrylic 488.00 Sqm 559.34

Polyurethane Hybrid Waterproofing Coating System on

existing terrace/roof surfaces, including mechanical

grinding of the existing surface to remove loose

particles and obtain a sound substrate; cleaning the

surface thoroughly by water spray; opening all cracks in

"V" groove shape and filling them with approved

polyurethane (PU) sealant or epoxy mortar, as directed.

The work shall include application of one self-priming

coat of approved single-component Elastomeric Acrylic

Polyurethane Hybrid Waterproofing Coating (best

quality approved make), diluted with clean water in the

ratio of 2:1 (coating : water) and applied at a coverage

of 10.0–11.0 sq.m per litre, allowing the primer coat to

dry for 2–3 hours. Thereafter, applying the first coat of

undiluted waterproofing coating at the rate of 0.50 litre

per sq.m, allowing it to dry for 4–6 hours, followed by

application of the second coat at the same coverage rate,

applied perpendicular (90°) to the first coat to ensure

uniform coverage and continuity of the waterproofing

membrane. The completed waterproofing system shall

achieve a dry film thickness (DFT) of 750–800 microns

with a total material consumption of 1.00–1.10 litres

per sq.m, including self-primer and two finishing coats.

The coating material shall conform to ASTM D6083

Type II or equivalent approved standard.

The rate shall include the cost of all materials,

polyurethane sealant, epoxy mortar, glass fibre mesh,

labour, surface preparation, tools and plants,

scaffolding, handling, transportation, application,

curing, testing, and all incidental works complete in

accordance with the manufacturer's specifications and

as directed by the Engineer-in-Charge.

Description of Item

Item RateIn

(with brief specification and reference to book of Quantity Unit Amount

No. Figure

specifications)

[32] Providing 15mm thick cement plaster in single coat on 100.00 Sqm 221.60

Rough (Similar)side of single or half brick walls for

interior plastering upto floor two level and finished

even and smooth in (ii) Cement mortar 1:4 (1-cement :4-

[33] Providing and laying Vitrified tiles 8 to 10 mm thick, 89.00 Sqm 1073.13

24'' x 24'' in flooring treads of steps and landing laid on

a bed of 12mm thick cement mortar 1:3 (1-cement :3-

coarse sand) finishing with flush pointing in white

[34] Providing and laying Machine cut, Free edges, Machine 30.80 Sqm 3265.33

polished Granite stone slab 18 mm (Average) thick

{Single piece not more than 150 cm } for stair steps and

riser as per design incl. full moulded round front edge &

1 cm nosing & necessary groobe on trade of steps laid

on 20 mm thick cement mortar 1:6 (1 -cement : 6 coarse

sand) jointed with grey cement slurry including rubbing

and polishing etc. complete

[35] Providing and Fixing Cupboard Shutter made by using 29.00 Sqm 3969.10

19mm Plywood and 1mm Laminate and having Handels

etc. as per design including all Labour, Material, Fixing,

Fastners, Transportation etc. complete as directed by

engineer in charge.

[36] Removing dry or oil bound distemper by a washing and 7420.00 Sqm 12.58

scraping and sand papering the wall surface smooth

including necessary repairs to scratches complete.

[37] Applying two coats of putty & two coats of primer of 2029.00 Sqm 40.59

approved brand and manufacture on new wall surface

to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign

matter and sand papered smooth.

[38] Distempering with dry distemper of approved brand 2029.00 Sqm 47.41

and manufacture (two coats) and of required shade on

wall surfaces of given an even shade, over and including

a priming coat of whiting after thoroughly brooming the

surface free from mortar dropping and other foreign

[39] Distempering with dry distemper of approved brand 568.00 Sqm 53.77

and manufacture (two coats) and of required shade on

Celling Surface surfaces of given an even shade, over

and including a priming coat of whiting after thoroughly

brooming the surface free from mortar dropping and

other foreign matter.

[40] Finishing wall with weather proof exterior emulsion 5634.00 Sqm 114.53

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the surface

to remove all dirt, and remains of loose powdered

materials.etc complete

Description of Item

Item RateIn

(with brief specification and reference to book of Quantity Unit Amount

No. Figure

specifications)

[41] Painting one coats (excluding priming coat) on 111.00 Sqm 95.48

previously printed steel and other metal surface with

synthetic enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and other

foreign matter.

[42] Providing and fixing Standard extruded color anodized 108.00 Sqm 3357.24

alu. Section main frame (outer size 95mm x 24.10mm x

1.17mm weight. 0.738 kg. /rmt.), Three track horizontal

member and vertical member of size 92mm x 31.75mm

x 1.50mm. (weight 1.06 kg / rmt.); With 1 mm thick

Mosquito Net, with rubber gasket, air lock strip and

finishing joints with silicone sealant, with standard

extruded color anodized aluminum coated fittings &

fixture with all three track mosquito net shutter.

[43] Providing erecting and fixing double coated 4-layer 8000.00 Litre 9.60

tough virgin plast ISI water tank of required capacity

each with all necessary fittings and connection etc.

complete on terrace.

[44] Providing and fixing Safty grills of required pattern for 2500.00 KG 106.15

windows Rectangular CRC pipes of size 50 x 30 x 2mm

at required spacing as per design including fixing rat

mesh and hold fasting with coach bolts including one

coat of primer and two coats of mattfinished oil painting

etc complete.

[45] Providing Material & Labour charge for making Flush 82.00 Sqm 6871.03

Door (finished size of door is 46 mm) of size 975 mm x

2400 mm considering waterproof flush door sheet of

mm thkness covered outer side by 1.00 mm Laminate &

Inside finished with 4 mm thk vineer finished with PU

polish on single sides of shutter & 1.0 mm thk laminate

at other side of shutter supprted by SS -316 finish

hinges. All exposed framing of 62 mm x12 mm made by

teak wood bidding complete with polish. Finishing with

all necessary hardwares like handles, conceal mortise

locks, cylinders with 6 nos of keys, stopers, tower bolt,

MS nails, SS-304 screws etc. as per details given in

drawing and as per instructions of Architect/Engineer

In charge. Please see the Attached Make List for

Apporoved Makes.

Total Rs.

I/We am/are willing to carry out the work at…...................... % above/below percent(Should be written in

figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to

Deduct………% below Add………% Above

In words In words

Description of Item

Item RateIn

(with brief specification and reference to book of Quantity Unit Amount

No. Figure

specifications)

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the

5. Credit of Dismantal Material amount of Rs. …NA…. must be recovered from Contractor's R.A Bill.

6. Payment will be given only if the material testing result is satisfactory.Testing of material shall be

done as per statement attached with specification

Dated Signature Deputy Executive Engineer Executive Engineer

the Contractor. R & B Sub Division Kheda R & B Division

Nadiad Nadiad