Proposed Renovation & Repairing Of MarutiYogaashram School, School No 83 Ward No 10 (Kaliyabid-Sidsar-Adhewada), Bhavnagar

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or

Providing and laying cement concrete 1:2:4 (1- Cement : 2-

Coarse sand : 4- graded stone aggregates 20 mm

nominal size) and curing complete including cost of

formwork in (A) Foundation and Plinth (upto 10 ton)

Providing and laying controlled cement concrete M.250

and curing complete including the cost of form work but

3 excluding the cost of reinforcement reinforced concrete 2.00 4616.00 Cum

work in (A) Foundations, footings, Base of columns and

Mass concrete. (upto 10 ton)

Providing laying controlled cement concrete M-250 and

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in COLUMN UP TO GROUND leval

Providing laying controlled cement concrete M-250 and

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in GROUND BEAMS / PLINTH BEAMS

Providing TMT Bar FE 500D reinforcement for R.C.C.

6 work including bending, binding and placing in position 755.00 76.52 Kg

complete upto floor two level

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -

fine sand)(B) Conventional for Ground Level

Providing and fixing Fiber Mesh ( 145 GSM) jali with

square of 12.50 x 12.50 mm at Crek Develop in Building.

Provid after Removing and scraping of old deteriorated

plaster after use Crek Filling Camical For Crek Filling

including fixing materials scaffolding labour etc. complete

(Plaster Work not include)

20mm thick sand faced cement plaster on walls upto

height 10 metres above ground level consisting of 12mm

9 thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 44.00 347.10 Sqm

8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand)

Providing 15 mm. Thick cement plaster in two coats on

fair side brick / concrete wall for interior plastering

consisting of 12 mm. Thick backing coat of cement mortar

1:4 (1-Cement : 4-sand) and 3 mm. Thick finishing coat of

C.M. 1:1 (1-cement : 1-fine sand) etc. complete for Ground

Providing and fixing 0.60 metre high fencing with

metre long M.S. Angle (Y type Fabricated/ instruction

given by engineer/) posts 50mm. X 50mm. X 6mm. And oil

painting 3 coats fixed at 2.5 mt. C/c with 4(Four) horizontal

Circle of 450mm dia of Razer Blade wire wighing

1.20Kg/Rmt, strai

Providing and Fixing safetygrill for windows, ventilations,

doors,dish drying rack Gate/Railing for staircase and

Remp, front and side elevation fins of required patern for

windows/ Door/ staircase and Remp using M.S.polished

12 bars& C.I. MOULD PIPES size12mmm flat and 518.00 99.00 Kg

rectangular / round M.S.pipes of required size at required

spac in gasper design with one coat of primer and two

coats of matt finished oil painting directed by architect and

hold fastwith coach bolts etc. complete.

Demolition of Brick work and stone masonry including

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.(ii) In Cement

Demolition including stacking of serviceable materilas and

14 disposal of unserviceable materials with all lead and lift. (i) 1.00 1097.15 cu.m

Providing & erecting Approved make Ceiling Fan with

double ball bearing ISI mark with condenser A.C.230V

15 50c/s. 1400 mm. sweep complete, canopy erected on 10.00 1738.21 Each

existing hook or clamp with earthing [ Make shall be

approved by Engineer in Charge]

Removing the installed Ceiling fan / Exhaust Fan for

16 servicing / repairing from ceiling and reinstalling the same 10.00 50.00 Each

after making in working condition.

Replacing approved make fan regulator

17 resistance type for Ceiling fan (credit of 5.00 105.00 Each

D.M. retained by Agency.)

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name 160V

to 270V,Power Factor more than 0.95, THD < 15 % CCT

3000 K to 6500K, Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 % ( fitting required LM-79 & LM-

80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following

type of pipe to be erected concealed in/ on surface on

wall/ceiling complete with 6A Modular type switch / bell

push & accessories and earth continuity of following type,

erected on PVC / Metallic box, single mounting base

frame covered with textured/metallic front plate modules

erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as

directed.(a) with medium class Rigid PVC pipe and

accessories Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earthwire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade

FRLS PVC insulated multistrand copper wires, in following

type of pipe to be erected concealed in / flushed on

wall/ceiling complete with 6A Modular type switch and hum

free EME four or more step type electronic fan regulator

20 with separately mounted and accessories with earth 10.00 598.93 pt

continuity of following type erected on PVC / Metallic box,

single mounting base frame covered with textured/metallic

front plate modules erected on / in wall / ceiling as per

pipe erected. with necessary ceiling rose / H.D.Connector

as directed.(a) with medium class Rigid PVC pipe and

accessoriesCat. III

Providing and laying polished kota stone slab 25mm thick

in risers of steps,skirting Dedo and pillars laid on 10mm

thick cement mortar 1:3 (1-Cement : 3 coarse sand) and

jointed with gray cement slury mixed with pigment to

match the shade of slab including rubbing and polishing

Steel work, welded in built up sections framed work

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint. (A)In beams and joists,

22 channels angles Tees, flats, with connecting plates or 5.00 9018.30 q

angle cleats as in main and cross beams. Hip and jack

rafters, purlins conneted to common

rafters and the like

Providing corrugated G.I. sheet of class-3 roofing fixed

with glavanished iron J or L Hooks, Bolts and nuts 8mm

diameter with bitumen and G.I. limpet washer or G.I.

limpet washer. filled with white lead complete excluding

the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick

Providing and fixing screw down bib taps of following

24 size.(B) Brass chromium plated screws down Bib Tap.(i) 10.00 184.98 Each

Providing and applying cementitious waterproofing

treatment in two coats using approved materials such as

Dr. Fixit LW+, Sika, or Fosroc Brushbond, over thoroughly

cleaned concrete surfaces. includes complete surface

25 preparation by wire brushing and removal of loose 31.00 672.13 Sqm

particles, algae, and laitance; crack filling using polymer-

modified mortar; and application of two coats of waterproof

slurry, followed by proper curing.

Providing and fixing S.W.R. pvc pipe for soil and waste

water including necessary fittings like band, door bend, Y,

Tee, Cowel, in floor and wall of approved make like

ASTRAL, Finolex or Supreme complete. (A) 110 mm.

Filling in foundation and plinth with murrum or selected soil

27 in layers of 20cm. thickness including watering, ramming 131.00 301.58 cu.m

and consolidating etc. complete.

Providing and fixing double row mild steel (MS) handrail

made of 32 mm dia circular pipe, including cutting,welding,

28 grinding, wall-mounted MS flat brackets (25x6 mm), fixing 20.00 572.00 Rmt

with anchor fasteners, and finishing with 1 coat of red

oxide primer and 2 coats of synthetic enamel paint.

Providing and fixing pre-cast concrete kerb stone of gray

cement based concrete block 30cm length,30cm height

and 15cm thick of M200 grade concret as per approved

design and including excavation for fixing in proper line

and level,filling the joint with C:M 1:3 (1cement:3fine sand)

Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface to

30 give an even shade including thoroughly brushing the 11.00 40.19 sqm

surface free from mortar dropping and other foreign matter

and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

31 surface to give an even shade including throughly brushing 11.00 83.98 sqm

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint

on wall surface (two coats) to give an required shape even

shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials.etc complete

Supplying, fabricating, and fixing MS cupboard door

(shutter type), wall-mounted, with powder-coated finish,

33 including hinges, locking arrangement, holdfasts, painting, 41.00 2013.00 sqm

and complete fixing in wall using proper anchor fasteners.

Filling in plinth with sand under floors includingwatering

ramming, consolidating and dressing complete

Dismentling steel work including distempering and

stacking the materials with all lead and lift.

Dismentaling of sheet roofing including ridges, Hips,

Valleys, Gutters etc. stacking of erviceable materilasand

disposal of serviceable materials with all lead and

lift.(i) G.I.sheet roofing.

37 8=[S8Z v 8=M,L EF0[ VF5JFG]\ SFDP 1.00 1800.00 DAY

38 0L5F8"D[g8 SFD DF8[ 5]Z]QF DH]Z A[,NFZ 5]ZF 5F0JFG]\ કામ 5.00 690.00 DAY

39 0L5F8"D[g8 SFD DF8[ :+L DH]Z 8M5,F 5]ZF 5F0JFG]\ SFDP 5.00 500.00 DAY

40 Labour charges - Fitter 15.00 704.00 Each

41 Labour charges - Welder 15.00 754.00 Each

Total work Amount

Add 1 % Labour Cess

Total cost of civil work (A)