MAINTENANCE AND REPAIRING WORK OF VARIOUS MUNICIPAL BUILDING AT T.P.S. NO.24,27,73 (MOTAVARACHHA-UTRAN) & VILLAGE BHARTHANA AND UMARA IN NEW EAST (SARTHANA) ZONE , SURAT.

NAME OF WORK :- MAINTENANCE AND REPAIRING WORK OF VARIOUS MUNICIPAL BUILDING AT T.P.S. NO.24,27,73 (MOTAVARACHHA- UTRAN) &

VILLAGE BHARTHANA AND UMARA IN NEW EAST (SARTHANA) ZONE , SURAT.

Sr. ITEM Qty. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Part -A Civil Work.

Dismentling steel work including distempering and stacking the maerials with all lead and lift.

Demolition including stacking of serviceable materials and disposal of unserviceable materials

2 with all lead & lift.

(i) RCC work 25.00 1110.75 C.M.

Demolition of brick work and stone masonary including stacking of serviceable materials and

3 disposal of unserviceable materials with all lead & lift.

(II) on Cement mortar. 25.00 577.92 C.M.

Removing the scraping of old deteriosted plaster of any thickness from wall/R.C.C. member

4 including stacking of serviceable material and disposal of unserviceable from site of work with 120.00 20.55 S.M.

all lead and lift.

Dismentalling tiled of stone floors laid in mortar including stacking of serviceable materials and

disposal of unserviceable materials with all lead & lift.

Kota stone flooring and steps 100.00 50.11 S.M.

Marble 100.00 50.11 S.M.

Tiles flooring / Dedo 100.00 50.11 S.M.

Granite flooring and steps 100.00 50.11 S.M.

Dismantling doors windows ventilators etc. (wood or steel) shutters including chowkhats,

6 Architraves, holdfasts and other attachment etc. comp. and stacking them within all lead & lift. 5.00 197.09 No.

(I) not exceeding 3 sq.m. in area.

Dismantling sanitary fittings like wash basin, w.c. pan Indian and Europeans type, flushing tank

etc. including stacking the materials with all lead & lift.

Dismentling C.I. pipes G.S.W. pipes and A.C. rain water pipes with fittings and clamps including

8 stacking the materials with all lead and lift. (for any dia, of pipe) 25.00 78.51 R.M

Dismentaling of sheet roofing inlcuding ridges, Hips, Valleys,Gutters etc. stacking of serviceable

materials and disposal of unserviceable materials with all lead and lift. (i) G.I. sheet

Removing of Collapsible Gate 2.00 101.00 No.

Removing of Rolling Shutter 2.00 101.00 EACH

Dismentling barbed wire in fencing including making rolls and also including dismentling fencing

posts including all earth work concrete in base and making good the disturbed fround stacking

useful materials as directed and disposing as directed and disposing of the unserviceable

materials with all lead and lift.

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) & disposal of the surplus

excavated soil as directed within a lead of 50 M. For following diameter of piles.

Excavation for foundation includ.sorting out & stacking of useful materials & disposing of the

12 excavated stuff upto 50 mt. Lead & all lift, watering etc Comp. (A) Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

(A) Loose or Soft soil

(1) Up to 1.5 Mt. depth 25.00 123.13 C.M.

Executed With Manual Labour

(A) Loose or Soft soil

(1) Up to 1.5 Mt. depth 40.00 212.52 C.M.

Providing & Laying C.C 1:5:10 (1cement :5coarse sand :10 graded stone agg.40 m.m Nominal

size )& curing comp. excl. cost of from work in :Foundation & Plinth

Providing & laying cement concrete 1:4:8 (1 cement:4 sand:8 graded stone agg. 40 mm nominal

size) & curing comp. incl.cost of form work in (A) Foundation and Plinth

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg 20m.m Nominal

size)&curing comp. excl. cost of form work in :(a) foundation & Plinth

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3 graded stone agg. 20 mm

nominal size)& curing comp. Includ.cost of form work but exclu. Cost of reinforcement for

reinforced concrete work in : (A) Foundation,footing,Base of columns and Mass concrete.

Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand: 3 graded stone agg. 20 mm

17 nominal size) finishing smooth curing etc. comp. Incld. Cost of form work but excl. Cost of

reinforcement for R.C.C. Work in : Up to G.L./P.L.

Sr. ITEM Qty. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

(1)Having c/s area up to 0.08 sq.mt 1.00 12844.32 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 1.00 11166.97 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 9201.68 C.M.

(1)Having c/s area up to 0.08 sq.mt 1.00 9102.61 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 1.00 8174.41 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 7086.88 C.M.

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C. work incl. bending,

binding & placing in position etc. comp. Upto G.L./P.L.

Brick work using common burnt clay building bricks having crushing strength not less than

19 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash 10.00 4441.11 C.M.

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in

20 layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and 5.00 136.92 C.M.

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness

including watering, ramming and consolidating etc. complete.

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level

22 consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing 10.00 347.42 S.M.

coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3 graded graded stone

23 agg. 20 mm nominal size) finishing smooth curing etc. comp. Incl.. Cost of form work but excl.

Cost of reinforcement for R.C.C. Work in :

(1) Having c/s area up to 0.080 sq.mt Ground Floor 1.00 12844.32 C.M.

First Floor 1.00 12885.28 C.M.

Second Floor 1.00 12926.24 C.M.

Terrace (third) Floor 0.00 12967.19 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt Ground Floor 1.00 11166.97 C.M.

First Floor 1.00 11207.92 C.M.

Second Floor 1.00 11248.88 C.M.

Terrace (third) Floor 0.00 11289.83 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. Ground Floor 1.00 9201.68 C.M.

First Floor 1.00 9242.63 C.M.

Second Floor 1.00 9283.59 C.M.

Terrace (third) Floor 0.00 9324.54 C.M.

(1) Having c/s area up to 0.080 sq.mt Ground Floor 1.00 9102.61 C.M.

First Floor 1.00 9143.56 C.M.

Second Floor 1.00 9184.52 C.M.

Terrace (third) Floor 0.00 9225.47 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt Ground Floor 1.00 8174.41 C.M.

First Floor 1.00 8215.36 C.M.

Second Floor 1.00 8256.32 C.M.

Terrace (third) Floor 0.00 8297.27 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. Ground Floor 0.00 7086.88 C.M.

First Floor 0.00 7127.84 C.M.

Second Floor 0.00 7168.79 C.M.

Terrace (third) Floor 0.00 7209.75 C.M.

(2) Slabs having more than 8cm. and upto 10 cm. Th'. Ground Floor 0.00 7984.42 C.M.

First Floor 0.00 8025.37 C.M.

Second Floor 0.00 8066.33 C.M.

Terrace (third) Floor 0.00 8107.28 C.M.

(3) Slabs having more than 10 cm. & upto 13 cm. Th'. Ground Floor 2.00 7396.96 C.M.

First Floor 0.00 7437.92 C.M.

Second Floor 0.00 7478.87 C.M.

Terrace (third) Floor 0.00 7519.83 C.M.

(4) Slabs having more than 13 cm. Thickness Ground Floor 0.00 6813.01 C.M.

First Floor 0.00 6853.96 C.M.

Second Floor 0.00 6894.92 C.M.

Terrace (third) Floor 0.00 6935.87 C.M.

Ground Floor 0.00 9982.37 C.M.

First Floor 0.00 10023.32 C.M.

Second Floor 0.00 10064.28 C.M.

Terrace (third) Floor 0.00 10105.23 C.M.

Ground Floor 0.00 5576.81 C.M.

First Floor 0.00 5617.76 C.M.

Second Floor 0.00 5658.72 C.M.

Terrace (third) Floor 0.00 5699.67 C.M.

Sr. ITEM Qty. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3 graded graded stone

24 agg. 20 mm nominal size) finishing smooth curing etc. comp. Incl.. Cost of form work but excl.

Cost of reinforcement for R.C.C. Work in :

(A) Stair cases including landings etc

Ground Floor 1.00 7698.11 C.M.

First Floor 1.00 7739.06 C.M.

Second Floor 0.00 7780.02 C.M.

Terrace (third) Floor 0.00 7820.97 C.M.

(B) Vertical and horizontal fins

Ground Floor 1.00 11613.07 C.M.

First Floor 1.00 11654.03 C.M.

Second Floor 1.00 11694.99 C.M.

Terrace (third) Floor 0.00 11735.94 C.M.

Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4 graded stone agg. 20 mm

nominal size)& curing comp. Includ.cost of form work but exclu. Cost of reinforcement for

reinforced concrete work in : (A) Foundation, footing, Base of columns and Mass concrete.

Providing & laying ordinary cement con.1:2:4 (1cement:2sand:4graded graded stone agg.

mm nominal size) finishing smooth curing etc. comp. Incld. Cost of form work but excl. Cost of

reinforcement for R.C.C. Work in :

(1)Having c/s area up to 0.08 sq.mt 1.00 12335.51 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 1.00 10658.16 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 8692.87 C.M.

(1)Having c/s area up to 0.08 sq.mt 1.00 8593.80 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 1.00 7665.60 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 6578.07 C.M.

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed stone agg. 20 m.m Nominal

size)& curing comp. incl. cost of from work in: wall caps/ copings.

Providing & fixing IS Mark TMT Bar FE 500d reinforcement for R.C.C. work incl. bending,

28 binding & placing in position etc.comp.---Ground Floor

Ground Floor 200.00 77.29 Kg.

First Floor 150.00 78.34 Kg.

Second Floor 75.00 79.39 Kg.

Terrace (third) Floor 50.00 80.44 Kg.

Brick work using common burnt clay building bricks having crushing strength not less than

29 kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

Ground Floor 10.00 4729.83 C.M.

First Floor 1.00 5018.55 C.M.

Second Floor 1.00 5307.27 C.M.

Terrace (third) Floor 1.00 5595.99 C.M.

Half brick masonry in common brunt clay building bricks having crushing strength not less than

30 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in foundation and plinth

(C)Fly Ash Bricks

Ground Floor 10.00 712.81 S.M.

First Floor 1.00 719.37 S.M.

Second Floor 1.00 725.94 S.M.

Terrace (third) Floor 1.00 732.50 S.M.

Uncoursed rubble masonary with hard stone of approved quality in foundations and plinth in

cement mortar 1:6 (1 Cement : 6 sand) including leveling up etc. complete.

32 Pointing on Coursed stone masonary with cement mortar 1:3 (1 cement : 3 Sand)

(A) Flush Pointing 0.00 101.89 S.M.

(B) Ruled Pointing 0.00 105.24 S.M.

33 Pointing on Uncoursed stone masonary with cement mortar 1:3 (1 cement : 3 Sand) ---

(A) Flush Pointing 0.00 110.24 S.M.

(B) Ruled Pointing 0.00 114.25 S.M.

Providing Rubble Pitching with hard stone of approved quality in cement mortar 1:6 (1 Cement

: 6 Coarse sand) including leveling up ,Curing etc. complete excluding pointing

Providing and filling rubbles including hand packing and filling interstices with quarry spalls

behind abutments and between returns as directed.

Providing upto floor two level precast cement concrete jali or grill 1:2:4 mix (1-Cement : 2-

coarse sand : 4-graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia. Mild

steel wire including roughening,cleaning, fixing and finishing in cement mortar 1:3 and curing

complete. (B) 40mm thick.

Ground Floor 5.00 741.93 S.M.

First Floor 1.00 752.39 S.M.

Second Floor 0.00 762.85 S.M.

Terrace (third) Floor 0.00 773.32 S.M.

Providing & Applying 10mm.th.cement plaster in single coat on brick/ concrete walls similar

surfaces for plastering & finished even & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A)

For wall and similar surfaces

Ground Floor 70.00 199.28 S.M.

Sr. ITEM Qty. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

First Floor 25.00 228.84 S.M.

Second Floor 10.00 258.39 S.M.

Terrace (third) Floor 10.00 287.94 S.M.

(B) For ceilings & soffits of stairs

Ground Floor 50.00 225.34 S.M.

First Floor 20.00 254.89 S.M.

Second Floor 10.00 284.45 S.M.

Terrace (third) Floor 10.00 314.00 S.M.

Providing & Applying 15mm.th.cement plaster in single coat on brick/ concrete walls

similar surfaces for plastering & finished even & smooth with a floating coat of cement slurry

mixed with admixture of lime or neeru in required proportion etc. comp. in C.M 1:3 (1

cement : 3sand) (A) For wall and similar surfaces -- Ground Floor

20mm thick sand faced cement plaster on walls for height more than 10 metres above ground

39 level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick 10.00 347.42 S.M.

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or similar surfaces at all floor

levels consisting of 12 mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th.

40 Finishing coat of C.M. 1:1 (1 cement: 1 sand) apply thick cement slurry and apply roller 200.00 324.00 SM

horizontal as well as vartical ( two times ) up to good quality and size of grain in elevation as per

directed by engineer incharge.

Providing 20 mm thick double coat mala cement plaster on brick / concrete work for

plastering comprising of base coat 12 mm thick cement plaster in cement mortar (1

41 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 10.00 286.10 S.M.

Cement : 2 Coarse sand) finished with trovel including scaffolding curing etc. complete.

Providing throating or plaster drip and moulding it to R.C.C. chajja etc. comp.. For all floor

Providing 20 mm deep finished groove in plaster in line and level etc. Comp. For all Floor

Providing and fixing 150 mm wide, approved quality chicken wire mesh (FRP / PVC)at junction

of brick work and RCC work or two dissimilar surfaces, at all heights fixed by nails, rowal plugs

or tag by cement mortar 1:3 before applying the plaster, including curing, scaffolding all

complete as directed.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand)

laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A) 25mm thick

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and

pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray

cement slury mixed with pigment to match the shade of slab including rubbing and polishing

Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria, Jhonson,Nitco,Somani ,Bell

make at all floor levels, in flooring, treads of steps & landings laid on a bed of 12 mm. Av.

Th.C.M.1:3(1cement :3 sand) finished with flush pointing in white cement etc.com. For all floors

Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria, Jhonson,Nitco,Somani,Bell

make at all floor levels in skirting risers of steps & dado on 10 mm. th. C.M.1:3(1cement :3 sand)

including necessary cement paste for fixing and joined with white cement slurry etc. complete.

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a

49 bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in 20.00 960.42 S.M.

Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and dedo on 10mm thick

50 cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry 20.00 1037.25 S.M.

Providing & laying marble stone slab flooring over 20 mm.av. base of C.M.1:6 ( 1 cement :6

51 coarse sand ) & jointed with grey cement slurry incl. rubbing & polishing comp.(A) Marble slab 10.00 2246.54 S.M.

Providing & laying granite slab 18mm thick in flooring, treads of steps and landing laid on bed of

20mm thick cement mortar 1:6 (1 Cement : 6 coarse sand) or lime mortar 1:1.5 laid and finished

with flush pointing in white or colour cement including rubbing and polishing complete. ( Basic

Rate:- Rs.1347.46/S.M.)

Providing & laying granite slab 18mm thick in skirting, risers of steps, dedo and pillars laid on

10mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) and finished with flush pointing in

white or colour cement including rubbing & polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

Providing & laying granite slab 18mm thick in Window-Door seal Frame Etc laid on 10mm thick

cement mortar 1:4 (1 Cement : 4 Coarse sand) with nessary adhesive material and finished with

flush pointing in white or colour cement, including rubbing & polishing comp.. (Basic Rate:-

Labour Charges For Half Round Edge For Granite

Sr. ITEM Qty. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Labour Charges For Quater Round Edge For Granite

Labour Charges For Edge Finished For Granite

Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria, Jhonson, Nitco, Somani, Bell,

Asian or Euro make in flooring,treads of steps & Landing laid on bed of 20 mm (Average)

base of cement mortar 1:6 (1 Cement : 6 Coarse sand) on new surface or fixing on existing

58 flooring by adhesive material including dismentaling of existing flooring and jointed with colour 80.00 1467.72 S.M.

cement slurry including finished with flush pointing & cleaning the

surface etc. comp.Size 24" x 24"

For Antiskid tiles

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in flooring treads of steps and

59 landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) finishing with 50.00 1092.37 Sqm.

flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting risers of steps and

60 dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with white 100.00 1135.80 S.M.

Providing and laying chequered precast concrete tiles 22mm thick with aggregate of sizes

upto 6mm in floors treads of steps and landing on 20mm thick bed of C.M. 1:6 (1 cement :

sand) or L.M. 1:1.5 (1 Lime putty : 1.5 sand) jointed with neat cement slurry with pigments to

match the shade of the tiles.

Providing and constructing sandwitch type Polish Kota Stone cooking platform 0.6 mt. wide &

0.75 mt. height, including one end side Polish Kota stone (Double Polish) of 1.25 mt. height &

front Polish Kota stone patti of 10 cm wide, vertical partitions of half B.M. wall in C.M. 1:4 and

10mm th. plaster in 1:3 with finishing smooth with cement slurry as required and Stainless Steel

sink of 0.45 mt x 0.45 mt size of approved quality and make with required all fitings & fixitures

etc. comp as per instruction given by site in charge at all

Providing and constructing sandwitch type Granite stone cooking platform 0.6 mt. wide &

mt. height, including one end side granite stone (Double Polish) of 1.25 mt. height & front

granite stone patti of 10 cm wide, vertical partitions of half B.M. wall in C.M. 1:4 and

10mm th. plaster in 1:3 with finishing smooth with cement slurry as required and

Stainless Steel sink of 0.45 mt x 0.45 mt size of approved quality and make with required all

fitings & fixitures etc. comp as per instruction given by site in charge at all floors. (Basic

rate of Granite Rs.1,200.00 / S.M.)

Providing & fixing at all floor levels,both face polished machine cut edge green kota stone

64 slab (30mm) for urinal partition joined with grey cement slurry (1:1) incl. Rubbing & polishing 15.00 900.00 S.M.

etc. complete. (M.R.)

Providing & fixing at all floor levels,both face polished machine cut edge Marble slab for

65 urinal partition joined with grey/White cement slurry (1:1) incl. Rubbing & polishing etc. S.M.

complete. (M.R.)( Basic Cost- Rs. 450/S.M.)

Providing and laying rough chiseled dressed stone flooring over 20mm thick base of cement

66 mortar 1:5 (1 cement : 5 coarse sand) or L.M. 1:1.5 including pointing with cement mortar 1:2 (1 S.M.

cement : 2 stone dust) etc. (A) 25mm thick

Providing and laying broken china mosaic flooring for terrace using 12mm to 20mm broken

pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered

67 to bring mortar creme out upto surface using white cement including rounding off junctions 10.00 779.70 Sqm.

and extending them upto 15 cm along the wall clearing with water and oxalic acid etc. as

Providing & fixing 35mm.th. Flush Door Solid Double Core type Both Face water proof Ply

Vennered & 1.5 mm th.laminate shall be pasted on both side with adhesives as specified by the

68 manufacturers. The laminate shall be as per approved shade & texture, of make incl. Sal wood 10.00 3720.00 S.M.

frames of finished size 12cm x 7cm.incl. S.S. Hinges with nessary screws & Anodized

aluminum fixtures & fastenings For all Floor

Same as Above But Without Frame 10.00 2520.00 S.M.

Providing & fixing 35mm.th. Indian teak wood shutters for doors, windows & clearstory

69 windows incl. Indian teak wood frames of finished size 12cm x 7cm.incl. anodized aluminum

fixtures & fastenings incl. Primer coat of approved quality & two coats of oil painting etc. For all

(A) Fully Panelled 10.00 5533.68 S.M.

(B) Partly Panelled and Partely Galzed 10.00 5185.03 S.M.

(C) Fully Galzed 10.00 4836.39 S.M.

Providing and fixing 35mm thick shutters for Doors, windows and clearstory windows

70 including anodised alluminium butt hinges with necessary screws. 10.00 4101.06 S.M.

(A) Indian teak wood. (i) Fully Panelled.

Providing and Replace door, Window S.S. Fixtures fix in wooden / Alluminium door - window

(A) S.S. Stopper 60 Cm long of ASIS 304 10.00 363.77 No.

(B) S.S. Stopper 30 Cm long of ASIS 304 30.00 182.32 No.

Sr. ITEM Qty. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

(C) S.S. Stopper 20 Cm long of ASIS 304 10.00 127.53 No.

(D) S.S. Aldrop 20 Cm long of ASIS 304 Grade 30.00 218.26 No.

(E) S.S. Aldrop 25 Cm long of ASIS 304 Grade 20.00 327.83 No.

(F) S.S. Aldrop 30 Cm long of ASIS 304 Grade 10.00 400.58 No.

(G) S.S. Handle for door/ window 10 Cm size of ASIS 304 Grade 30.00 54.78 No.

(F)S.S. Handle for Door 15 Cm size of ASIS 304 Grade 30.00 76.17 No.

(I) S.S. Pipe Handle for door 30 Cm size o ASIS 316 Grade 10.00 873.05 No.

(J) Inter Lock [Kadaka lock] 30.00 209.71 No.

(H) Locks Godrej Mortice lock cover 10.00 329.63 No.

(I) Door closers arrow type with spring 12 length as approved sample (30 cms) 10.00 479.33 No.

(J)Handle for doors Windows Cupboards etc. Brass 15 cms. Length 30.00 59.91 No.

(K) S.S. Door / window hinges 4x1"x1" 30.00 54.78 No.

Providing and fixing FRP FRAME size 125 x 65 mm and 35 mm thick FRP shutter with wood

grain raised panneled design finish shutter having extra reinforcement on sides & edges in Gel

coat finish. The core of the shutter & frame is to be filed up with injected polyurethene foam done

71 in situ along with embedded wooden pieces for stiffening & also taking hinges & fixtures. The 30.00 2019.98 S.M.

whole FRP frame & shutter is to be water proof weather proof,termite proof &resistance to mild

acid/alkali. Rates are to be inclusive of S.S.hinges with fastener sleeve & alluminium fixtures &

Providing and fixing window having extruded aluminum Colour anodized section frame main

outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track member size

122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical member of size 122.20mm x

31.75mm x 1.50mm @1.398 kg/mt with sliding shutters of horizontal member size 40mm x

18mm x 1.29mm@ 0.456kg/mt ,vertical member of size 40mm x 18mm x 1.29mm @

kg/mt with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc

complete for window.

(A) Same as above but Colour anodized 10.00 2140.33 S.M.

Providing and fixing window having extruded aluminium Powder Coated section frame main

outer size 95 mm x 24 mm x 1.17 mm (of jindal section no:2459 @ Wt. of 0.738 Kg/mt),

horizontal Three track member size 92 mm x 31.75 mm x 1.30 mm (of jindal section no;8688,

@ Wt. 1.07 Kg/mt), vertical member of size 92 mm x 31.75 mm x 1.50 mm (of jindal section

73 no:8933, @ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mm x 18 mm x 5.00 1591.87 S.M.

1.29 mm (of jindal section no:8947 @ wt. of 0.456 kg/mt), vertical member of size 40 mm x

mm x 1.29 mm (of jindal section no:8949 @ wt. of 0.456 kg/mt) with 5 mm thick transparent

bronze colour tinted float glass with powder coated aluminium fittings & fixtures and transparent

silicon sealant glass fixing to frame as per details etc.

(A) Same as above but Colour anodized 30.00 1591.87 S.M.

Providing and fixing window having extruded aluminium Powder Coated section frame main

outer size 63.50 x 38.10 x1.95 mm (of Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal

Two track member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section no:8687, @ Wt.

0.695 Kg/mt.) vertical member of size 61.85 mm x 31.75 mm x 130 mm (of jindal section

74 no:8758 @ wt. of 0.659 kg/mt) with sliding shutters of horizontal member size 40 mm x18 mm x 5.00 1705.67 S.M.

1.29 mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt) vertical member of size 40 mm x

mm x 1.29 mm (of jindal section no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of

Kg/mt) with 5 mm thick tranparent bronze colour tineted float glass with powder coated

aluminium fittings and fixtures and transparent silicon sealant glass fixing to frame as per details

etc. complete for window.

(A) Same as above but Colour anodized 30.00 1705.67 S.M.

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x1.2mm

75 , @ Wt. 0.643 Kg/mt with colour Powder Coated alluminium frame for ventilation with 5 mm thick 5.00 1175.56 S.M.

frosted glass as details etc complete for Ventilation

(A) Same as above but Colour anodized 10.00 1175.56 S.M.

Providing and fixing standared extruded of aluminium section of size 61 x 37.0 x0.90 mm (of

Jindal section no.14080, @ Wt. 0.471 Kg per mt) with Powder Coated alluminium frame with

mm thick transparent bronze colour tinted float glass as details etc. complete for fix window.

(A) Same as above but Colour anodized 10.00 1833.29 S.M.

Providing & fixing partly panel & partly glass Powder Coated Aluminium doors with aluminium

section of Hindalco, Jindal , Narmada,Banco or Equivalent approved make having Poder Coated

outer frame Leg Partition section of 63.50 mm x 38.10 mm having weight 1.158 kg. / R.M.

shutter section having size 83.5 mm x 44.45mm ( top & bottom: 1.384 kg./rmt. and middle

77 kg./rmt.) door vertical 47.62mm x 44.45 mm ( vertical:0.881 kg./rmt. & top hing side:0.974 5.00 3237.00 S.M.

kg./mt.), Glazing Clip (Jindal Section No. 19370 Wt. 0.109 Kg./ Mt.) with 5mm thick sheet glass

in acid frogting and 12 mm thick prelaminated sheet of Greenlam, Panama or archid make as

approved by Engineer-incharge including fixing brass pivot, handle, lock etc. complete.

(A) Same as above but Colour anodized 25.00 3237.00 S.M.

Providing & fixing Powder Coated Aluminium partly glazed and partly panelled partition

using medium duty sections of Hindalco,Zindal, Narmada, Banco or Equivalent approved make

having section 63.50 mm x 38.10mm ( Frame-.758 kg/rmt & Middle section- 0.819 Kg./rmt),

Galzing Clip with 5 mm thick clear float glass of approved make including all other necessary

78 fittings and fixtures. Entire work will have to be made water proof using necessary rubber 5.00 2400.00 S.M.

sectioned wherever required. Gaps all round the frame to be filled with approved water proof

sealent. Bottom portion of doors both side to be covered with 12mm thick prelaminated particle

board of approved make and quality and as per design.

(A) Same as above but Colour anodized 25.00 2400.00 S.M.

Providing & fixing Glass Table Top using 08mm th.clear glass with crystal edge & necessary

hardware materials etc. complete as per instruction by engineer in charge.

Sr. ITEM Qty. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & laying Non reflective solar contact film for fixing on glass as approved

colour,design,cutting complete as per instruction by engineer in charge.

Providing & fixing door closer Ozon / Dorma / Hyper / Hardwin / Godrej / Alluminium body ISI

81 brander equivalent make with necessary hardware materials etc. complete as per instruction by 5.00 1400.00 Nos.

engineer in charge.

Providing & fixing water proof plywood (ISI marks 710 grade) at the door,window and any space

82 in the building. necessary hardware,screws materials etc. complete as per instruction by

engineer in charge.

Providing & fixing M.S.Grills of required pattern to wooden frames of windows etc. At all floor

levels with M.S. flats at required spacing & frame around square or round bars with round

headed bolts & round headed bolts and nuts or by screws incl. Priming coat of Red lead paint

etc. comp. (A) Plain grill For all Floors

Providing & fixing in position collapsible steel shutters with vertical channels 20 x10 x 2 mm.

Braced with flat iron diagonals 20 x5mm size with top & bottom rails of T-iron 40x40x6mm. with

38mm dia. steel pulleys comp. with bolts, locking arrangements, stoppers, handles incl. applying

a priming coat of Redlead paint etc. comp.

Steel work welded in built up sections, framed work including cutting, hoisting, fixing in position

and applying a priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with connection plates or angle cleats as in

main & cross beams,hip & trussed purlins connected to common raffers & the like

(B)For work like chain link fencing, above compound wall etc. 5.00 9108.48 Qtl.

(C)in trusses & trussed purlins upto 25m.Span &15m.Overall height 0.00 10197.11 Qtl.

Providing and Fixing Hollow steel Sections Framed Work including Cutting, Hoisting,

86 Welding & Fixing in position Purlin, Main Chord etc. as per Engineer- in-charge.TATA / JINDAL / 5900.00 126.00 Kg.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates

etc., including welding, grinding, buffing, polishing and making curvature (wherever required)

and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing

with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of

87 required size, on the top of the floor or the side of waist slab with suitable 500.00 450.00 Kg.

arrangement as per approval of Engineer-incharge, (for payment purpose only weight of

stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,

fasteners etc.).

Providing and fixing G.I. chain link of 50mm x 50mm size x 10 guage thick with nuts, bolts,

88 washer or G.I. pins, excluding M.S. angles etc.complete as per relevent IS specification & 20.00 311.00 S.M

directed by engineer in charge. (TATA or Jindal Make)

Providing and fixing and fitting TATA or Jindal make G.I. barbed wire fencing with necessary

barbed wire (12 x 14 guage, weight not less than 0.14 kg. / mt.) pins, hooks, excluding M.S.

angles etc. complete as per relevent IS specification.& directed by engineer in charge

Providing and Fixing hot dip concertina coil of 610 mm dia. made out of 2.59 mm (12 SWG)

hot dip galvanized (G.I. coating not less than 200 gm/sqmt.) th. wire having 80 nos. of spikes

and 200 nos. of clips made out of stainless steel (AISI 304) 1.5 mm th. dia., G.I. strips 0.5 mm

90 th. ( G.I. coating not less than 120 gm/sq.mt.) weight of one coil should not be lesss than 15 kg. 10.00 231.00 R.M.

etc., complete at the top of compound wall fixed with S.S. clips and binding wires whereever

necessary etc. complete. ( NOTE: Strctching length of one coil should not be more than 9 mt.)

Providing & fixing colouron galvaniced steel, zinc / aluminium allus coated sheet 0.5 mm.

91 thick roofing fixed with gslvanised grom J or L hook bolts and bolt 8mm dia with bituman and S.M.

impet washer filled with white lead etc. Excluding the cost of purlins rafter and trusses. (Tata /

Jindal or equivalent)

Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished iron J or L Hooks,

Bolts and nuts 8m diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled

with white lead complete excluding the cost of purlins, Rafters and Trusses. (1) 0.80 mm

thick sheet. (Tata / Jindal or equivalent)

Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished iron J or L Hooks,

Bolts and nuts 8m diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled with

white lead complete excluding the cost of purlins, Rafters and Trusses. (1) 0.63 mm thick sheet.

(Tata / Jindal or equivalent)

(ii) 0.63mm THick Sheet 100.00 1016.00 S.M.

Providing & fixing 150mm wide 450mm over all semicircular plain G.I. sheet class-3

gutter with iron brackets 40mm x 3mm size bolts, nuts, washers etc. including marking

necessary connection with rain water pipes.

(i) 0.8 mm thick

Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I. "J" of "L" hooks bolts

95 and nuts 8mm dia G.I. limpet and bitumen washer complete (i) 0.80 mm thick 50.00 664.70 R.M.

Sr. ITEM Qty. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & fixing 150mm wide 450mm over all semicircular plain G.I. sheet class-3 gutter

96 with iron brackets 40mm x 3mm size bolts, nuts, washers etc. including marking necessary 50.00 412.00 R.M.

connection with rain water pipes. (ii) 0.63mm thick

Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I. "J" of "L" hooks

97 bolts and nuts 8mm dia G.I. limpet and bitumen washer complete (ii) 0.63mm thick sheet 50.00 464.00 R.M.

Providing & Fixing UV stabilise FRP Sheet roofing with overlapping the main cladding on both

edges. All fixing holes must be predrilled oversize as specified for the sheet length and fastener

being used. Fasteners must be fitted with approved washers. Fixings should be tightened to

ensure a weatherproof seal but they must not be over tightened Side-lap fasteners must also be

98 installed at specified centers with the FRP sheet having clearance holes provided as per the

main fasteners Weatherproofing shall be provided at all flashing points under the normal

flashing by the fitting of a foam closure strip to match the profile being used. Closure strips will

be sealed to the sheet with an appropriate non setting silicone sealant. Excluding the cost of

purlins rafter and trusses.

(b) 2 mm thick 50.00 1100.00 S.M.

Providing & Fixing Polycarbonate sheet roofing with surface of the sheet is coated with an anti-

UV Co-extrusion layer having good weather resistance, it can maintain its optical properties and

mechanical performance for a long time. Fasting is usually done by screws. , The fastening

screws should be inserted about 500 mm apart and 300mm apart Along the supporting internal

99 purlin and edge pulin.All fixing holes with diameter at least 2 mm larger than screw must be

predrilled into each screw location. The screws should be 6mm diameter with length according

to sheet thickness and corrosion resistant, with at least heavy duty hot dripped galvanized or

stainless steel. Excluding the cost of purlins rafter and trusses.

(a) 1.5 mm thick Solid Sheet 25.00 1261.00 S.M.

(b) 2 mm thick Solid Sheet 50.00 1510.00 S.M.

Providing & Fixing 80 mm dia M.S. pipe as vertical post are beded in 1:1.5:3 concrete also

100 horizontaly in line and connecting to purline angle etc by welding rereting etc. (a) Medium duty 50.00 750.00 R.M.

Providing & Fixing 50 mm dia M.S. pipe as vertical post are beded in 1:1.5:3 concrete also

101 horizontaly in line and connecting to purline angle etc by welding rereting etc. (a) Medium duty 50.00 485.00 R.M.

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter

locked together through their entire lenght and jointed together at the ends by end locks mounted

102 on specially designed pipe shaft with bracket plates, guide channels and arrangements for

inside and outside locking with push-pull operation including the cost of hood cover and spring

(A) Shutters having width below 3.5m 10.00 3554.40 S.M.

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter

locked together through their entire lenght and jointed together at the ends by end locks

mounted on specially designed pipe shaft with bracket plates, guide channels and

arrangements for inside and outside locking with push-pull operation including the cost of

hood cover and spring etc. complete. (B) Shutters having width 3.5 M and above

Providing and fixing hard drawn steel wire fabric 75mmx25mm mesh or weight not less than

104 7.75 kg.per Sq.M. to window frames etc. including 60x 20mm beading of teak wood. 10.00 762.20 S.M.

Painting two coat (excluding priming coat) on new steel and other metal surface with

105 synthetic enemal paint, burshing to give an even shade including cleaning the surface of all dirt, 100.00 68.57 S.M.

dust and other foreign matters.

Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S. bar bent to shpe with hooked

106 ends to RCC slabs curing, layig including painting the exposed portion of loops, all as per 20.00 135.47 No.

standard design complete.

Distempering two coats with oil bound washable distemper of approved brand & manufacture

& of required shade on wall surface to give an even shade over and & including a priming coat

107 of alkali resistance primer of approved brand after throughly brushing the surface to give an

even shade after throughly brushing the surface free from mortar droppings and other foreign

matter and also including preparing the surface even and smooth.

(A) For wall 100.00 75.84 S.M.

(B) For ceilings 75.00 84.37 S.M.

--do---- Extra Subsequant coat over above Item

(A) For wall 100.00 31.91 S.M.

(B) For ceilings 50.00 35.25 S.M.

Apply two coats of putty and two coats of primer of approved brand and manufacture on new

108 wall surface to give an even shade including thoroughly brushing the surface free from mortar 100.00 40.59 S.M.

dropping and other matter and sand papered smooth.

Distempering two coats on previously distempering wall (without primer) with oil bound

washable distemper of approved brand & required shade on wall surface to give an even shade

after throughly brushing the surfaces clean of all grease, dirt loose places of sceles & also

including preparing the surface even and smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on

undecorated wall surface to give an even shade including throughly brushing the surface free

from mortar droppings and other foreign matter and sand papered smooth.

Sr. ITEM Qty. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

For every subsequent coat Extra over item no.above 50.00 35.41 S.M.

Applying Priming coat over new steel and other metal surface after over and including

preparing the surface by throughly cleaning oil, grease dirt and other foreign matter and scoured

with brushed fine steel wool, scrapers and sand paper with ready mixed priming paint brushing

Painting two coats of enamel paint (Excluding priming coat) over previously painted wall

112 after removing entire surface with even shade & surface after removing dirt, dust foreign matter 150.00 60.00 S.M.

etc. comp.(M.R.)

Painting two coats of enamel paint over priming coat (including priming coat) on wall after

113 removing entire surface dirt, dust foreign matter & also incl. preparing the 150.00 90.00 S.M.

surface even & sand papered smooth etc. comp.(M.R.)

Providing & applying two coats of weather shield max paint (3 coats may be required in case

of darker colours.)of ICI Dulux or Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in shade and colour approved by

architects, on exterior surfaces of the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the architects and manufacturers.

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and

flaking paint. This can be achieved by brushing with a wire/ stiff coir brush, followed by water

114 jetting if required. Fill up all minor cracks and defects with white cement and sand mixture in the 50.00 82.00 S.M.

ratio 1:3. For application on previously painted wall, previous coatings of paint must be

thoroughly scraped off and Clean the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5 hours. Application of putty

is not recommended.

Minimum 4-6 hours duration is required between each coat of weather shield max paint

Box Cutting the road surface to proper slope and camber for making base includinng removing

115 the excavated stuff and depositing on the road side slope as directed up to 50 mt. lead. 5.00 109.41 C.M.

Preparation of subgrade with Compacting, Levelling and consolidation of subgrade with

116 miniroller /plate vibrator machine including watering and filling in depressions which occur during 500.00 9.00 S.M.

the process as directed by engineer in charge.

Providing & filling with Mix soil in layers of 20 cm. Th'. Incl. watering, ramming & consolidation

Providing, Supplying & Sprading of Gravel in Play area including dressing etc. comp.

Supplying & filling fine sand(pana) in 75 mm / 100 mm / 150 mm compacted thickness over the

base including necessary compaction, watering etc. complete. Item includes leveling by using

vibratory plates compacted machine and as directed by engineer in charge.

Providing & laying Granular sub base (GSB)confirming to Grading-V of Table 400.0 of

compacted thick of 150mm with specified graded stone metal and sand mixed in place and laid

with mechanical means spreading with motor grader and compacting with vibratory roller having

minimum 80-100 KN static weight to acheve desired density of 98% of MDD including all

material, labour, machinery with all leads and lift etc. complete.

Removing & resetting existing readymade c.c. kerb stone of required size & thickness in line

.level and in truly vertical position including filling joints in C.M. 1:1 (1 part of cement : 1 part of

121 stone dust) smooth pointing in C.M. 1:1 (1 part of cement : 1 part of coarse sand) including 100.00 56.00 R.M.

watering etc. complete and as directed by engineer in charge. (M.R)

Removing and Resetting of Paver block of walk-way with necessary sand / pana filling and make

in line and level with necessary vibrating using compactor machine.

Providing 100mm thick readymade C.C. kerb of strength M-20 (size 300mm x 380mm)

purchased from SMC's approved paverblock manufacturer & setting in line, level and in truly

123 vertical position, including filling joints in C.M. 1:1 (1 part of cement : 1 part of stone dust) 100.00 228.00 R.M.

smooth pointing in C.M. 1:1 (1 part of cement : 1 part of coarse sand) including watering etc.

complete and as directed by engineer in charge.

For rounding at the edge of footpath (For fanning portion) 100.00 274.00 R.M.

Providing interlocking type Rubber moulded cement concrete paver block of approved

shape, design & colour having 60mm thickness (M-35) purchased from SMC's approved

124 paverblock manufacturer only & fixing of fine sand bedding. Item includes levelling by using

vibratory plates compacted machine. Item also includes all materials, labour, equipments,tools,

plants, watering, cleaning etc. complete.

With colour 50.00 524.00 S.M.

Without colour 200.00 524.00 S.M.

Providing & fixing interlocking type Cement Concrete paver block of approved shape & design

having 60 mm thickness (M-40) purchased from SMC's approved paverblock manufacturer only

125 on fine sand bedding. Item includes leveling by using vibratory plates compacted machine. Item 5.00 553.00 S.M.

also includes all materials, Labour, euipments, tools, plants, watering, cleaning etc. complete.

For Road Junction 80 mm thick ( M-50) 3.00 714.00 S.M.

Sr. ITEM Qty. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & laying cement concrete Pavement using 1:1.5:3 (1 cement:1.5 sand:3 graded stone

126 agg. 20 mm nominal size) & Vaccuum Dewatering technique including floating surface with a 10.00 5981.00 C.M.

skim powder floater, curing etc. complete.

Providing & laying cement concrete Pavement using 1:2:4 (1 cement:2 sand:4 graded stone

127 agg. 20 mm nominal size) & Vaccuum Dewatering technique including floating surface with a 5.00 5245.25 C.M.

skim powder floater, curing etc. complete.

Providing and laying 200 micron plastic sheet on prepared sub base For V.D.S Concrete

Cutting of Groove 5 to 7 mm thick in VDS for depth 1/3 of total thickness with filling of epoxy

sealent as directed by engineer in charge

WATER SUPPLY & SANITARY ITEMS

Prov.& Fixing water closet squatting pan (Indian type W.C.pan) at all floor levels, size

580mm incl. 100 mm size "P'or "S" trap for water closet squatting pan joining the trap with the

130 pan & soil pipe in C.M. 1:1 (1cement :1 fine sand) etc. Comp.(A) Vitreous china long 10.00 1471.41 No.

pattern of approved colour For all Floor

Providing and fixing Wash Down Water closet European type W.C. pan with integral P or S

trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 find sand)

(seat and cover to be measured and paid for separately) (A) Viterous china pattern - I (i) in

approved colour

Providing and fixing plastic seat and cover for wash down water closet with C.P. brass hinges

and rubber buffers (B) Plastic seat and cover.

Providing & fixing wash basin with single hole for pillar tap at all floor levels, with C.I. or M.S.

Brackets painted white incl. cutting holes & making good the same incl. fittings such as pillar

133 tap, capstan head screw down high pressure with screws, shanks & back nuts, C.P. Brass 10.00 2132.94 No.

waste trap, screw down stop tap 15 mm. dia. etc. complete. (A) Vitreous china flat back wash

basin 550 mm.x 400 mm. size in approved colour For all Floor

Providing & fixing Urinal or approved quality including conecting the Urinal with waste pipe, tap

134 etc. complete. (A) White earthenware flat back or corner type size 430 mm x 260mm x 350mm 25.00 1074.86 Each

Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all floor levels, mounted on

135 mm. th. A.C. sheet or plywood sheet & fixed to wooden plugs with C.P.brass screws and 5.00 859.41 No.

washers etc. For all Floor

Providing & Fixing C.P. Brass screw down bib tap at all floor levels, polished bright etc. comp.-

(A) 15mm dia. For all Floors

Providing and fixing waste Pipe for Washbasin or sink (A ) 32 mm Dia

Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at all floor levels, size 500mm

x 400 mm incl. 100 mm size "P'or "S" trap for water closet squatting pan joining the trap with the

pan & soil pipe in C.M. 1:1 (1cement :1 fine sand) etc. Comp.(A) Vitreous china long pattern

Make- Cera S3010109, Parry ware C0117CS/C0117* , Jaquar ,HindWare 20143 1.00 3277.39 No.

Providing and fixing Wash Down Water closet European type W.C. pan with integral P or S trap

139 with normal closing seat cover L bend ncluding jointing the trap with soil pipe in cement mortar

1:1 (1 cement : 1 find sand) (A) Viterous china pattern - I

Make- Cera CONVENTIONAL B1510121 , Parry ware C0297*/ C0278, HindWare sleek

Jaquar- CNS-WHT-751P180SPPZ

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M 1:5)chamber & water tight

C.I. cover with frame of 300mmx300mm size (inside) with weight includ. plastering smooth

inside & outside 15mm. th' in C.M.1:3 etc. comp. (i) Square mouth traps---(A) 100mm x 100mm

(A) 100mm x 100mm Size -P type 2.00 1292.19 No.

(B) 150mm x 100mm Size- P Type 0.00 1246.92 No.

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M 1:5)chamber &

water tight Pre cast R.C.C. cover of 300mmx300mm size (inside) includ. plastering

smooth inside & outside 15mm. th' in C.M.1:3 etc.

comp. (i) Square mouth traps--

(A) 300mm x 300mm Size -P type 1.00 1098.48 No.

(B) 150mm x 100mm Size- P Type 0.00 1053.20 No.

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside dimension ,455 x 610 mm & 450 mm

deep sewer trap chamber with 23 cm th' B.B. masonary walls in C.M 1:5 with cement plaster

mm th' in C.M. 1:3 inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement:

2 Sand : 4 Grade stone aggregate 20mm size) ,Foundation concrete 1:5:10 & fixing C.I. cover

with frame to be not less than 38 kg. On top etc. comp. for single pipe.

.(A).Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 3.00 2915.61 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 2.00 233.85 Each

Sr. ITEM Qty. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & construction simple chamber of 23 cm. th' B.B. Masonary in C.M 1:5 with cement

plaster 15 mm th' in C.M. 1:3 inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix (

143 1 cement: 2 Sand : 4 Grade stone aggregate 20mm size) ,Foundation concrete 1:5:10 & fixing 3.00 2932.93 No.

C.I. cover with frame to be not less than 38 kg. On top etc. comp. Inside dimension,455 x

mm &450 mm deep for single pipe

.(A).Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 10.00 2681.76 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 5.00 242.39 Each

Providing & fixing white vitreous china urinal of size 450 x325mm as per IS-2556 (Part-2 ) with

C.I. hangers and 15mm dia. C.P. spreader,32mm dia CP bottle trap and pipe to wall with C.P.

flange complete including cutting and making good the walls and floors wherever required.

Make -Cera,Parry ware, Jaquar, HindwareMake- CeraCat. No. S4020103, Parry ware C0501*,

Jaquar URS-WHT- 13261H ,HindWare BACK SMALL

Providing & fixing Wash Hung basin with single hole for pillar tap, Size- 550 x 400 mm at all

145 floor levels, with C.I. or M.S. Brackets painted white incl. cutting holes & making good the same

etc. complete. For all Floor

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH), Jaquar SLS- WHT -6801

Providing and fixing Towel Ring fabricated from seamless stainless steel tube 2mm thick in

146 bath room with polished wall flange at end of bars with heavy duty anchor fasteners &

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua ACN- 1121N ,HindWare F880007

Providing & fixing S.S.towel rail of 600 mm long approved make including, providing & fixing

C.P. brass screws, making holes in walls & making good.

Make- Cera F5015103CH, Parry ware F880005T, Jaquar 1111BSM ,HindWare F880005T 7.00 1100.42 No.

Providing & Fixing stainless steel recessed type Soap dish of approved make. Including

providing & fixing screws, washers, cutting & making good the walls.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-1131N ,HindWare F880011 5.00 839.91 No.

Prov.& Fixing Health Faucet ABS Body with wall Hook and 1 Meter chrome plated PVC Hose

Make- Cera F8030106AB, Parry ware T9874A1, Jaquar ALD-587 ,HindWare F160109 5.00 1009.90 No.

Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor levels, polished bright etc.

Make- Cera F2013151 BIB COCK, Parry wareG3104A1, HindWare F280002 BIB COCK, Jaquar

FLR-5047 N BIB COCK

Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at all floor levels, polished bright

Make- Cera F2013163, Parry ware G4834A1, HindWare Cat. No.: F530004, Jaquar FLR-5041N

152 Providing Metropole Flush Valve Dual Flow 40mm Size (Concealed Body)

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar FLV-1089NSQ ,HindWare F860075

Providing flush cock consisting lever, cartridge sleeve & flange & concealed part

Make- Cera EXPOSED PART F2013751 &Concealed part F4060101 ,Parry ware

T9824A1&T9823A1, Jaquar FLR 5083 KN , CONCEALED BODY ALD-081,HindWare F280052 3.00 2056.47 No.

& CONCEALED STOP COCK F850105

Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with C.P. copper connecting pipe

154 450 mm long and nuts, washer and brass flange complete, including cutting and making good

the wall where required.

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat. No.:

F440020 F850094, jaquar CON 053 KN

Providing & fixing of overhead shower 80 mm (3”) dia with 3 flow with Overhead Shower arm

155 200 mm with wall flange complete

Make- Cera F7010602AB, Parry ware, Jaquar OHS-1989 ,HindWare Cat. No.: F160144 3.00 1526.42 NO.

Providing Sink Cock with Regular Swinging Spout

Make- Cera F2008251 , Parry ware G3321A1 , Jaquar FLR-5347N ,HindWare F650013 3.00 1785.90 NO.

Providing and fixing C.P. Brass pillar cock with copper connection ,C.P. Brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1, HindWare Cat. No.: F650003, Jaquar

Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In C.M. 1:1 of following nominal

internal diameters incl. Testing of pipes and joints etc. Comp

Providing & laying in trenches galvanised mild steel tubes(medium grade) TATA / ZENITH /

ASIAN / JINDAL MAKE of the following nominal bore & tube fittings etc. comp..

Sr. ITEM Qty. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & Fixing to wall, ceiling floor at all floor levels, galvanised mild steel

160 tubes(medium grade) TATA / ZENITH / ASIAN / JINDAL MAKE of the following nominal bore,

tube, fittings & clamps incl. making good the wall ceiling and floor etc. complete.

Providing & Fixing gun metal check or non return full way wheel valve at all floors levels,

Providing and fixing waste Pipe for Washbasin or sink (A ) 32 mm Dia

Providing and fixing Supply Pipe for Washbasin or sink

Providing and fixing Jet Sprey Cock at all floor level etc. complete.

Providing and fixing

(A) 40 mm thick RCC cover for simple chamber,s.w.trap & tank Top 5.00 400.00 No.

(B) PVC water tank cover upto 2000 Lit. 5.00 200.00 No.

Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt. Size having weight not less than

35 Kg. etc. complete.

Providing & Fixing U-PVC pipe (SWR) confirming to IS no. 13592 (Type "B") of

167 Prince/Supreme/Jain/Astral/Tulsi/Finolex make for soil and waste discharge system at all

floor levels incl. All fixtures like bends, tees, shoe etc. jointed with resin of approved brand &

manufacture etc. comp. (M.R.)

Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A") of

168 Prince/Supreme/Jain/Astral/ Tulsi/Finolex make for rain water at all floor levels incl. fixtures

like bends, tees, shoe etc joined with resin of approved brand & manufacture etc. comp. (M.R.)

Providing, Laying and jointing on true line and level UPVC pipe (SCH-40) line of

Prince/Supreme/Jain/Astral/ Tulsi/Finolex make including fittings make or equivalent as

approved by angineer-in-charge. Pipe shall be fixed on the wall the help of clamp at every two

meter C/C or shall be concealed as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/ Astral/ Tulsi/Finolex

make for water supply line at all floor levels incl. fixtures like bends, tees, shoe etc joined with

resin of approved brand & manufacture etc. comp. Pipe shall be fixed on the wall the help of

clamp at every two meter C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 110x110 mm diameter with jali of

171 the following nominal diameter of self cleaning design with C.I. scread down or hinged grating 10.00 586.27 No.

including the cost of cutting and making good the walls.

Providing & Fixing in position PVC Cowl vent to pipes of

172 Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp.

Providing & fixing M.S. Holder Bat clamps at all floor levels of approved design to C.I. Or S.C.I

173 pipes including the cost of cutting holes & making good the wall etc. Complete - 100 mm. dia. 20.00 30.00 No.

Sr. ITEM Qty. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & fixing G.I./Aluminum Patti clamps at all floor levels of approved design to C.I. Or

174 S.C.I pipes including the cost of cutting holes & making good the wall etc. Complete - 100 mm. 15.00 20.00 No.

Providing & fixing Z - clamps at all floor levels of approved design to C.I. S.C.I. or PVC pipes

175 including the cost of cutting holes & making good the wall etc. Complete - 100 mm dia as per

architect instructions.

(C) 110 mm dia to upto 150 mm dia 10.00 90.00 No.

(C) 150 mm to 200 mm dia 10.00 98.00 No.

Providing & Fixing Kathi around the vertical PVC drainage pipes for concealing with cement

176 plaster 20 mm avg thickness(CM 1:3 [1 cement :3 coarse sand]) finishing as per instruction

given by Eng. incharge. for

(A) 75 mm PVC PIPE 5.00 173.00 R.M.

(B) 100 mm /110 mm PVC PIPE 20.00 180.00 R.M.

Providing erecting and fixing double coated Sintex/Super/Reno PVC (ISI) mark water tank of

177 required capacity each with all necessary fittings & connection etc. complete on terrace. 10000.00 3.95 Lit.

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl. boxing, centering, vibrating,

curing & mixed with approved water proofing cement compound or "CEMWET"or"PIDICRETE

LW"integral water proofing admixture as water proofing agent to be mixed with 50 kg. cement

bag shall be as recommended by the manufacture of the water proofing material, concrete work

for top, bottom slab & side pardi for Under ground Tank & Item incl. Necessary excavation &

refilling the available earth, 15 cm th' C.C 1:4:8 for bedding concrete, Half B.M. in C.M. 1:4

outside wall, inside R.C.C. pardi as per design, 10mm.th. water proofing cement plaster in C.M.

1:3 with smooth finishing,watering etc.Comp.to all inner face & bottom of tank curing etc. comp.

incl. Locking arrangement, outlet, inlet, overflow & wash out pipe arrangement as necessary &

C.I. Cover 0.60 x .045 weight not less then 35kg. etc. com. as per structural drawing excluding

Steel & as directed by Engineerin- charge

Underground tank 0.00 6.87 Lit.

Providing and filling in depressions of Bath and W.C. At all floor levels, after completing

179 plumbing work of pans, pipes,traps etc.with cinder or fly ash as directed by Engineer in charge 5.00 500.00 C.M.

NOTE :- (1) The whole work is to be executed through specialized agency with a guarantee of

180 10 (Ten) years given on a prescribed proforma duly stamped (2) The rate shall include for work

at all floors & conducting water proof test as directed. (M.R.)

(A) Providing and laying water proofing treatment to vertical and horizontal surfaces of

depressed portions of W.C.,kitchen and the like consisting of : (a) I course of applying cement

slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS : 2645 in

recommended proportions. (b) II course of a layer of plaster in C.M. 1:3 with water proofing

compound confirming to IS:2645 about 25 mm. th' in the floor of the depression & about 18mm

th' On the side walls of the depression up to the floor level, water proofing plaster about 18 mm. 75.00 296.00 S.M.

th' be continued on the walls above the floor level for a height of 600 mm. with surface suitable

to receive further treatment (c) Finishing top with stone aggregate 10mm to 12mm nominal size

spreading @0.008 C.M./S.M., thoroughly embedad in plaster layer. as per specifications &

instructions of Engineer in charge (Cement consumption 0.316 Bags / S.M.)

(B) Providing and laying integral cement based water proofing treatment including preparation

of surface as required for treatment of roofs, balconies, terraces etc. consisting of following

operations. (a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement

admixed with proprietary water proofing compound comforming to IS:2645 over the R.C.C. slab

including cleaning the surface before tratment. (b) Laying cement concrete using broken

bricks/brick bats 25 mm to 100 mm size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse

sand) admixed with 75.00 511.00 S.M.

proprietary water proofing compound conforming to IS:2645 ,brick bats is finally covered by

jointless cement plaster 20mm th. in C.M. 1:4 added with special water proofing compound

confirming to IS:2645 & top smooth finished with trowel with false chequered marking of

mm.size.The treatment is carried along the vertical surface of the parapet & other adjoining wall

up to height of about 300 mm in a shape of quarter round vata Incl. curing etc. Comp. With

average thickness of 120 mm and minimum thickness at khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with water for a minimum period of two weeks

for curing and for final test. All above operations to be down in order and as directed and

specified by the engineer-in-charge. With average thickness of 120 mm and minimum thickness

at khurra as 65 mm. (Cement consumption 0.511 Bags / S.M.)

Proiding & laying water proofing treatment to vertical and horizontal surfaces like consisting

of (a) I course of applying cement slurry 4.4 kg per sq.mt. mixed with water proofing compound

confirming to IS:2645 in rcommended proportions. (b) II corse of 20mm cement plaster 1:3

mixed with water proofing compound in recommended proportion (c) III course of applying blown

or / resideal bitumen applied hot at 1.7 kg per sqm of area. (d) IV course of 400mm micron th.

PVC sheet. (Overlaps at joints of PVC sheet should be 200mm wide and pasted to each other

with bitumen about 1.7 kg./ sqm.)

Providing cement vata (10 cm x 10 cm size) quarter round in cement mortar 1:1 including neat

cement finishing, watering etc. complete..

183 Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm length etc. 10.00 101.91 No.

Providing & Fixing chromium plated brass half turn flush cock at all floor levels, of approved

quality incl. fixing in pipe line etc. Comp.-- 25 mm dia.

Sr. ITEM Qty. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & Fixing abonite ball cock of approved qualities directed etc. comp. (A) 25 mm. dia.

Providing & Fixing 3 mm thick metal sheet with CNC cutting to fix it on vertical

surface.Steel work welded in built up sections, framed work including cutting, hoisting, fixing in

186 position and applying a priming coat of red lead paint in beams & joists channels angles, tees, 0.00 2677.00 Smt.

flats with connection plates or angle cleats as in main & cross beams, hip & trussed purlins

connected to common raffers & the like.

Providing & fixing black board on walls of 1.8mt.x1.2mtsize made up to 12 mmth.B.W.P

.Plywood (Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) fixed with teak

wood beading of 65 mmx 50mm size, rubbing & sanding comp., incl. applying two coats of black

187 board paint over a priming coat on plywood & French polishing the frame all round etc. Comp. 0.00 4193.00 No.

as per instruction of Engineer in charge (M.R.)

Providing & Fixing Reading table size 8' x 4' and height 2'-6" with table top 18mm thick

(Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) commercial plywood with

1.0mm thick lamination sheet fitting with teakwood moulding table top supported on 3" x 3"

teakwood leg & 3" x 11/2" teakwood framing top and bottom with french polish labour work

hardware etc. as per site in charge instruction and as per drawing.

Providing & Fixing Librarian table with 18mm thick commercial plywood (Brand

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) )with 1.0mm thick lamination sheet

table top supported on 2" x 2" teakwood leg & make 3 nos. drawers of 1' 3" width on both side

with necessary french polish hardware labour etc. as per site incharge instruction and as per

drawing ( Size 4' x 2'-6" x 2'-6", all framing other then legs are teak wood of size 2" x 1")

Sr. ITEM Qty. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & fixing Green board on walls of 1.8mt.x1.2mt size made up to

mm th.ply (using IS 710 Marin ply) with 1 mm thick outside green board &

190 0.8mm backside white laminate & with good Quality of adhesive with 0.00 5195.00 No.

appropriate fittings of Alluminium fittings or teak wood bedding 65 mmx 50mm

size, rubbing & sanding comp., as per instruction of Engineer in charge (M.R.)

Providing & fixing White board on walls of 1.8mt.x1.2mt size of 12mm thick with appropriate

191 fittings and Alluminium fittings comp., as per instruction of Engineer in charge (M.R.) 0.00 4230.00 No.

Providing & Fixing simple 12mm thick commercial plywood (Brand Saras,Kitply,Uniply, Anchor,

Green,Wood Stock or century) Rack of size 6' x4' and depth 1'-6" 5 Nos. horizontal partition,

supported 2" x 1" framing with necessary french polish hardware labour etc. as per site incharge

instruction and as per drawing.

Providing & Fixing fitting commercial 8mm thick plywood (Brand Saras,Kitply,Uniply, Anchor,

Green,Wood Stock or century) magazine stand of Size 6' x 4' with 3" x 11/2" vertical

193 supporting and adjustable lag support and horizontal simple 2" x 1" teakwood patti for magazine 1.00 6745.00 No.

support with necessary french polish hardware labour etc.as per site in charges instruction and

as per drawing.

Cutting out cracks of wall or terrace to V section ,cleaningout, grouting with cement and sand

slurry 1:3 (1 cement : 3 sand ). at any height

Providing and fixing Soft Pin Board With Aluminium Frame As per Design by architech and

engineering in charge for Fix Soft Pin Board

Providing & fixing of 50% Blackout window curtain (Diamond Pattern) with Cloth aster with S.S.

196 25mm Hollow Pipe With Covers.As per attached drawing & instructed by in charge Consultant. 30.00 870.00 S.M.

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having

Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for Extra Strength

The Light weight calcium silicate ceiling tiles shall have , light reflection 85% non-

combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal

conductivity0.043° w/m KC.for the best thermal Insulation . The Light weight calcium

Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos having NRC

value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm

to be laid on true horizontal level suspended inter locking metal grid of hot dipped

galvanized steel sections (galvanizing @120 grams per sqm including both side)

consisting of main ‘T’ runner suitably spaced at joints to get required length and size of

24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross

‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along

spaced between main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm and

secondary cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm thick (Minimum)

sheet to be interlocked at middle of the 1200X600mm panel to form grid of size

600X600mm resting on periphery walls/partitions on a perimeter wall angle pre-coated steel

of size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of

rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and

laying 15mm thick Densified edges light weight calcium silicate ceiling tiles of

approved texture (Fine Fissured/Cosmos/Spintone) in the grid including, cutting /making

opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.,

wherever required, Main ‘T’ runners to be suspended from ceiling using G.I. slotted

cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash

fasteners, 4mm G.I. adjustable rods with galvanized steel level clips of size 85X30X0.8mm,

spaced at 1200mm centre to centre long main ‘T’ bottom exposed with 24mm of all T-

sections shall be pre-painted with polyester baked paint, for all heights, as per

specifications, drawings and as directed by engineer-in-charge.Note:- Only calcium

silicate false ceiling area will be measured from wall to wall. No deduction shall be

made for exposed frames/opening (cut outs) having area less than

0.30 sqm. The calcium silicate ceiling tiles shall

have NRC. Value of 0.50 (Minimum) for Fine fissured/Spintone/Cosmos and

NRC for Globe, light reflection 85% non-combustible as per

Sr. ITEM Qty. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Supplying and Fixing of Suspended ceiling system components which includes Single Layer

Boarding with 12.5mm thick USG Boral Standard Plasterboard This includes of USG Boral

Thundersteel Perimeter Channel (0.50mm thick having one flange of 20mm and another flange

of 30mm and a web of 28mm) screw fixed to brick wall/partition with the help of approved

screws at 600mm centers. Then suspending of USG Boral Thundersteel Intermediate channel

(45mm x 0.90mm thick with two flanges of 15mm each) from the soffit at 1220mm centers with

of USG Boral Thundersteel Ceiling Angle (25x10mmx0.50mm thick) fixed to RCC Slab with of

USG Boral Soffit Cleat (37x27x25x1.6mm thick) and 8mm dia 40mm long Anchor Fastener @

600mm Centers, respectively. USG Boral Thundersteel Ceiling Section (having web of 51 mm

and two flanges of 27mm each) are then fixed to the of USG Boral Thundersteel Intermediate

channel with the help of connecting clip (2.6mm Dia) and in perpendicular direction to the USG

Boral Thundersteel intermediate channel at Comp. With average thickness of 120 mm and

minimum thickness at khurra as 65 mm. is required between each coat of weather shield max

CEMENT SHEET CEILING

Providing and fixing of Cement sheet ceiling using aluminium channel & pipe, screws etc.

complete with all material, labour with all lead, lift and transport. and finished by approved

shade of plastic paint (Basic Rate for 8 mm plain cement sheet : 35 rs./sqft.)and finished and

complete the work satisfactorily as per instruction of architect or Engineer-in charge And as per "

Architecture" detail.

Providing and filling Epoxy grout of approved or suggested brand by consultant / Engineer in

200 charge in 4mm to 6mm thick tiles joint including spacer with cleaning of joint by vacuum or 30.00 40.00 R.MT

Applying polymer modify mortar in proportion at 1:2(one part cement: 2 part white sand(sweet

water) with chemical(SBR) dosage of minimum 5 litre pe bag of cement. Also apply bonding

201 agent prior to polymer modify mortar in proportion of (1:1)(1 part SBR : 1 part cement) using

Roof, MC and FOSROC

Beam / Columns 5.00 1830.00 S.M.

Ceiling 5.00 1830.00 S.M.

Crack Repairs:-Crack filling using fiber reinforced polymer modified mortar after openning crack

202 in "V" grove, Making Surface dust free, with a bond coat of polymer as per the data sheet for 20.00 120.00 R.M.

crack repairing cracks less than 8mm

Cutting out cracks of roof terrace to V- section , cleaning out, wetting , grouting with

cement and sand slurry 1:3 (1-cement 3-sand )

Providing & fixing G.i mesh 25X25X3mm used for celling repair fixed with celling rebar column

as per directed by enginner incharge rate excluding the rebar cost .

Providing and filling the expansion joint by polymer confirm to BS4254-1983 as per required

shade and specification by making groove of 50 mmx12.5mm lather by cutting or by repairing

groove and removing mortar dropor anyother foreign materials including applying primer and

filling required size (over size of joint PU foam etc. complete.)

Providing and fixing rebar of following diameter using chemical grout of Swanchore/Hilti/Fischer

or equivalent make including cost of all equipments, tools, material, labour, etc. Standard

procedure as mentioned in manufacturer's specifications shall be strictly followed, which shall be

submitted and got approved from the authority prior to start of work. The rate shall also include

cost of drilling of hole of required diameter and depth as

205 mentioned in manufacturer's specification, cleaning the hole with required air blower and other

necessary tools and tackles, positioning, providing and grouting chemical, allied fixtures and

fasteners, etc. but excluding the cost of reinforcing bar etc. complete. Item includes necessary

scaffolding, staging, labour, tools and equipments, etc. complete as directed by the engineer-

(D) 16 mmm dia 5.00 190.00 No.

(E) 20 mmm dia 5.00 340.00 No.

(F) 25 mmm dia 5.00 500.00 No.

Sr. ITEM Qty. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Carring out plinth treatment to post construction / existing structure by spraying chemical

solution for termite control treatment including labour and material consistment with ISI

specification. Using Chlordene and Chiorpurfiles 20 EC. As per 6131_paret-II

206 Consentration Weight one percent is recommended i.e. one litre 20 EC chemical 250.00 87.03 Smt.

emulsion with 19 liter give 1% concrentration inclusive of one litre chemical emulsion

appication at the rate of 5 litre chemical / Sqm of surface is recommended as per IS.

Anti-Termite System:Providing and laying of permanent piping technology anti-

termite treatment before flooring work by installing LLDP (Low linear density polyethylene)

tube of 8 mm O.D. & 6.4 mm 1.D. with inbuilt pressure compensation chip every

30 cm interval in the tube, having working pressure of 2 Kg/cm2 and release rate of

Itr/hour fixed by P-clips and nails. The LLDP pipe shall be installed at the entire periphery of

the building and at internal network of building at a depth of 20 to 200 mm under floor at every

2 to 3 mtr. c/c distance (adjusted as per building layout ) & Ends of loop pass through a

PVC elbow of minimum 32 mm ID at junction box of wall and floor level, entering into a

207 steel reinforced grooved flexible pipe of minimum 22 mm ID leading into junction box and 10.00 134.33 S.M.

the loops shall terminate in junction boxes & test every junction during injecting chemi

Comp. With average thickness of 120 mm and minimum thickness at khurra as 65 mm. is

required between each coat of weather shield max paint

RCC Core Cutting is about making precise, circular cuts for creating holes of required diameters

for Rehabilitation in civil works. The core drilling rod is fitted with diamond pieces at the drilling

208 end. The core cutting machine can be used for both horizontal and vertical hole making

Dr. Fixit Raincoat Select or equivalent as approved by engineer incharge ,is composed of high

quality acrylic emulsion polymer, light fast & weather durable pigments, properly selected &

graded fine fillers, additives & biocides. It is used as a waterproofing & protective coating for

exterior walls of the buildings because it forms higher film thickness. It has excellent flexibility,

209 breathability, water & dust resistance, crack-bridging, weathering durability and an excellent 10.00 222.12 SM

resistance to the growth of micro organisms. PRIMING:Apply a liberal coat of exterior acrylic

primer and allow it to dry for 4-5 hours. Application of putty is Not recommended. Minimum 4-6

hours duration is required between each coat of Dr. Fixit Raincoat Select.

TOTAL AMOUNT RS.

TOTAL AMOUNT RS.

EXECUTIVE ENGINEER

NEW EAST (SARTHANA) ZONE

SURAT MUNICIPAL CORPORATION