Providing /drilling of 125mm dia machine Drilled Bore well including Providing, installation of electric run Submersible pump of 3HP at Mohallah 99 Guest house Bhimbat (Under Untied Grant LAHDC Kargil 2024-25).

Amount

Drilling of 125mm dia Hand Pump Well in collapsible strata conglomerate, boulders, gravel, pebbles, silt, clay, rock etc formation whatsoever encountered at site. The job envisages construction of Hand Pump Wells of an avg. depth of 60 Mtrs. below ground Level, or till the sufficient discharge of water is available from the bore hole by way of Drilling of 125mm Bore Holes using 115mm ODX method and exploration of underground potable water by tapping sufficient aquifer zones with simultaneously lowering of 125mm M.S/G.I. plain ended pipe duly chamfered and welded. The job includes all charges on account of cost of drilling/ accessories/ tools/ attachments/ bits/ POL’s/ consumable/ labour etc with carriage of all materials upto site of work, including cost of suitable casing pipe (ISI marked steel tubes for water wells of hot types finished seamless (HFC) electric automatic fusion welded (HFC ) resistance welded in length of 3Mtr with tolerance of +_ 10cm beveled casing 125mm dia nominal bore with 4.5mm thickness/shoe of adequate hardness. The job also includes development of drilled bore holes with Air Compressor of suitable capacity to clear the tapped water from all suspended impurities.

ODX Depth

DTH Depth

Shifting of machinery from one site to another site including construction of approach road if necessary at site.

Providing, Supply, installation and successful commissioning of suitable submersible Pump set make of Crompton Graves head capacity 70-90Mtr Q=1.21 Lps. 1.2HP with electrical panel 240V. 50 cycle for single phase and safety cable wire 90Mtr including all necessary fittings items as per site requirement as per the direction of site Engineer incharge, including all carriage complete.

Providing fixing of GI/HDPE pipes complete including cost of pipes and required fittings as per the direciton of site Engineer incharge including all carriage complete.

HDPE Pipe 40mm dia

Gate Valve 40/32mm dia

Clamp with Nut & Bolt

Sockets, Bends, Tee, Reducer, Reducer Tee, Union, Elbow, Reducing Union, (Heat/Butt fision fiting of different dias as per site requirement as per the direction of site Engineer, Incharge.

M/s. J.K. WATER MISSION (BID ID -148459)

M.s SYED NOORULLAH RIZVI (BID ID -148543)