SPECIAL REPAIRS TO TOILET BLOCKS OF BUILDING NO P-1920 (WING NUMBER V AND VI) IN THE AREA OF AGE B/R-II UNDER GE (A) NO 1 JODHPUR.

Amount

Dismantling, stone slab, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.

M&L for 25 mm thick cement concrete 1:2:4, type B-0 (using 12.50 mm graded crushed stone aggregate), as in base course, to receive floor finishes, complete all as specified & directed.

M&L for glazed colour ceramic tiles (premium quality) of size 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including M&L 10mm thick backing coat in CM (1:3), (including Highlighter pattern), complete all as specified and directed. .

M&L for joint free non skid ceramic coloured tiles (premium quality) of size 6 to 8 mm thick (square/rectangular) area of each tiles 300 x 300 mm (size & shape, shade and pattern as approved by GE), as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including M&L 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed.

Demolition of brick / block or stone / boulder masonry walling built in cement mortar including all quoins arches pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and as directed.

Taking down cement or cement lime plaster, RCC surfaces,ceiling, dado surfaces , any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removing rubbish to out side MD land complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry with solid blocks type C1 (20mm graded aggregate) bult in CM 1:6 , exc. 10 cm in width and setting in mortar 1:6, complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished surface even and smooth without using extra cement, complete all as specified and as directed.

M&L 15 mm thick rendering in cement mortar 1:4 on fair faces of stone or brick work or concrete surfaces mixed with water proofing compound as per manufacturer instructions and finished the surfaces even and smooth with out using extra cement complete all as specified and as directed. Note :- WPC will be measured and paid seperately.

M&L Rendering 10 mm thick in CM (1:4) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth, complete all as specified and as directed.

M&L for preparation of old decorated ceiling surfaces plastered or unplastered, by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, including cornices etc and applying one coat of white wash on ceiling, complete all as specified and directed.

M&L for Preparation of new/old plastered or unplastered surfaces of wall and applying two coats of white wash on wall surfaces complete all as specified and as directed.

M&L preperartion of newly plastered surfaces on wall and applying two coats of wall putty with fair finished and even surface and applying two coats of oil bound distemper complete all as specified & directed.

M&L for preparation of old surfaces of wall including complete removal of existing treatment brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and making surface even and applying two coat of oil bound distemper over one coat of primer , complete all as specified & directed

M&L preparation of newly/old plastered or un-plastered surfaces of walls and applying two coats of cement base paint over a coat of white cement as primer, complete all as specified & directed

M&L for preparation of new/old surfaces of wall including complete removal of interior treatment brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and making surface even and applying Two coats of 100% Premium acrylic emulsion paint weather proof (plastic paint) and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces, complete all as specified & directed

Taking down chowkhat with shutters (without taking off shutter from frame) size area n.exc1.50 sqm each, complete all as specified & directed

Taking down chowkhat with shutters (without taking off shutter from frame) size area exc 1.5sqm but n.exc4.0 sqm each, complete all as specified & directed

Taking down of steel window and ventilators, complete all as specified & directed

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and as directed.

S&F of Box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete with glazing bars, all as specified.

S&F of Box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete without glazing bars, all as specified.

S &F of Stainless steel butt hinges medium weight, cold rolled of size 100 mm size.

S&F 150mm long aluminium anodized barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 150mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed.

S & F Aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet,cast orextruded sections& fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,complete all as specified and directed.

S&F 125 mm size single action spring hinge bright finished body of mild steel with steel wire spring heavy duty all as per the sample, complete all as spd & directed.

M&L for applying two coat of synthetic enamel paint on steel surfaces of any description not otherwise described over 10 cm width or girth over red oxide including necessary preparation complete all as specified and directed

Hacking out old broken glass (any thickness , size , quality or description ) from metal frame incld punching or drilling out old glazing pins /spring clips and provding and fixing new ones,complete all as specified and directed.

S&F for 3 mm thick plain sheet glass ordinary quality & glazing with oil putty in square n exc 0.50sqm ineach pane,complete all as specified and directed.

S&F for 4 mm thick figurred , pin headed glass ordinary quality & glazing with oil putty in square n exc 0.50sqm ineach pane,complete all as specified and directed.

M&L for PCC 1:2:4 type B1 Mix using 20mm graded stone aggregate as in bed block for hold fast including necessary form work,complete all as specified and directed.

S&F in repair of Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)and cast iron `P' or `S' trap front or back fixed in repairs Including connection to trap etc and provision of cement concrete bedding and making good to floor completely all as directed.

S & F in replacement white vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm with integral foot rests and PVC 'P' or 'S' trap, including M&L brackets, flush HDPE pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts & fixing arrangement of cistern, including provision of cement concrete bedding 1:5:10 type E2 complete all as specified and as directed.

Supply only in replacement 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia complete all as specified and as directed.

Taking up or down GI tubing/CPVC 15/20 mm bore and connection, including cleaning for refixing or remove to site,complete all as specified and directed.

Taking up or down GI tubing/CPVC 25 mm bore and connection, including cleaning for refixing or remove to site,complete all as specified and directed.

S&F GI tubing (ISI marked) 40mm bore medium grade with all fittings, fixed to wall/ceiling or laid in trenches/floor and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

Supply, laying, testing & commissioning of 25 mm outer dia CPVC pipe,SDR-11, with all fitting (eblow, socket,tee with internal thread of brass) fixed to wall, ceiling or laid on floor, with CPVC solvent, complete all as specified and directed.

Supply, laying, testing & commissioning of 20 mm outer dia CPVC pipe,SDR-11, with all fitting (eblow, socket,tee with internal thread of brass) fixed to wall, ceiling or laid on floor, with CPVC solvent, complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, complete all as specified and as directed by Engr-in-Charge.

S&F PVC connections of 15mm size with PTMT nuts of 600mm long complete all as specified and directed.

S & F in repairs vitreous china ware wash hand basin with pedestal, white, flat back of size 550 mm X 400 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe, complete all as specified and as directed.

M&L for 18 to 20 mm thick (telephone black shade) granite stone, as in cooking plateform, oval type WHB counter, sink & etc. machine cut, (table rubbed and polished) best quality as per sample, including & over 20 mm thick screeding in CM1:3 including rounding & double mouldlng with jointless finish of the edges, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.providing suitable dia hole in the slab for the gas pipe, complete all as specified and as directed.

S & F in repairs vitreous china bowl urinal flat back, size of 465x355x265mm white(minimum) with grating and union for discharge pipe including providing and fixing plugs, bedding urinals against wall in cement mortar 1:2,securing urinals to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms),complete all as specified and directed.

S&F Pillar taps 15mm bore , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe,complete all as specified and directed.

M&L for 6 mm thick bevelled edges high quality looking mirror fancy type fixed to wall with chromium plated screw with cup washers and molded edges etc complete all as specified and as directed

S&F in repair bib taps chromium plated 15mm cast copper alloy, fancy type screwed down screwed for iron pipe 15mm bore complete all as specified and directed

S&F in replacement CP brass wall mixe ,connecting legs and wall flanges, complete all as specified and as directed. .

S&F in repair of stop valves/angle cock,chromium plated 15mm cast copper alloy, fancy type, fixed complete all as specified and directed

S&F in replacement of two way stop cock with flange 15mm dia, chromium plated, brass, fancy type, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S & F in repair 25 mm bore stop valves/Angle valve, cast copper alloy, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed both ends for iron pipe 25 mm dia, fixed complete all as specified and directed

S&F tubular towel rail 20mm dia brass chromium plated `D' type 60cm long with bracket and fixed complete all as directed.

S&F in repairs Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms),complete all as specified and directed.

Toilet paper holder, vitreous China, box type coloured, complete all as specified and directed.

S&F 32mm bore low or high density polyethylene waste pipes (LDPE) of pressure rating 6Kg/Sqm fixed complete to walls, ceiling or floors etc all as specified and as directed.

S&F Grating doom 100 mm dia of PTMT (minimum weight 125 gms) fixed as in repairs complete as per make as approved by the GE.

Supply and fix health faucet chromium plated including 12 mm dia flexible tube attachment to wall hook and connection complete as per complete all as specified and directed.

S&F in repair Fancy type Chromium plated over head shower 120 mm dia with arm, round shape, single flow (ABS body CP with gray face plate) with Rubit cleaning system, suitable for 15mm bore pipe, including fixing to steel pipe or union, complete all as specified and as directed by Engr-in-Charge. .

S&F Corner Glass shelf 300mm superior quality with CP tubular framing & brackets complete all as specified and directed.

Dismentaling of cast iron/pvc soil waste & vent pipes 100/110 mm dia incl all fittings etc complete all as specified and directed.

Dismentaling of cast iron/pvc soil waste & vent pipes 75 mm dia incl all fittings etc complete all as specified and directed.

S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 75mm bore, in any length with or without ears, jointed with cement sand mortar, laid in trenches or in floors OR fixed to walls with and including MS clamps complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 100mm bore, in any length with or without ears, jointed with cement sand mortar, laid in trenches or in floors OR fixed to walls with and including MS clamps complete all as specified and as directed.

S & F cast iron bends with ovall access door [any radius], diminishing pieces or tapers [larger bore measured] of 100mm bore, for cast Iron soil / waste / vent pipes complete all as specified and as directed.

All as per item No.72.00 here-in-above, but suitable for 75mm bore pipe,complete all as specified and directed.

S & F cast iron vent cowls suitable for 100mm dia pipes complete all as specified and as directed.

M&L for 75mm outlet diameter PVC nahani trap, with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate), complete all as specified and directed.

Removing of existing filling in sunken floor o wc/bath/kitchen and repair to sunken floor with 15 mm thick plastering in CM 1:3 of internal surface with PC than painting with bitumen 30/40 over a coat of bitumen primer putting 50 micron polythene than filling with pcc 1:5:10 type E-1 using 40mm graded stone aggregate and inserting 50 mm bore GI water pipe light grade spout complete all as specified and directed.

Taking down existing roof treatment in any postion and any thickness on RCC roof slab and debries to be disposed out of MOD land complete all as specified and directed.

M&L for neat cement slurry @ 3.00 kg/Sqm and screeding / bedding layer of 10 mm thick in CM 1:3 mixed with water proofing compound as per manufacturer instructions over the RCC roof slab for laying of water proofing treatment including providing the following as roof treatment complete all as specified and as directed : - (a) FIRST COURSE: Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastered surfaces. (b) SECOND COURSE: Applying one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm (c) THIRD COURSE : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 3.00mm having weight not less than 3.00 Kg/Sqm using torch application method with minimum 10cm side lap and 15cm end lap complete . (d) FOURTH COURSE : Applying one coat of bonding material using blown type bitumen conforming to IS- 702 grade 85/25 @ 1.20 Kg/Sqm. (e) FIFTH COURSE : 40 mm thick plain cement concrete 1:2:4 (using 20 mm stone crushed aggregate) as in roof padding, including WPC as per manufacturer instruction. NOTE :- 1. A Information Tablet will be put up in the front side wall of the buildings where this work will be done. All building/structure shall be provided with plaque (tablet) furnishing the information as per PS clause, in plaster engraving in and painted as directed by GE 2.WPC shall be measured and paid separately under respective item.

M&L for plain cement concrete 1:2:4 type B-0 (using 12.50mm graded stone agg) over roof for making good depression/undulation and as in roof kerb to match the existing, complete all as specified and as directed.

Dismantling existing water tank of capacity exceeding 1000ltrs and not exc 2000 ltrs and removing from site, complete all as specified and as directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including one 20mm ball brass valve with polythene float and fly nut complete all as specified and directed.

S&F 2000 litres capacity rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including one 20mm ball brass valve with polythene float and fly nut complete all as specified and directed.

Supply only integral water proofing compound (ISI marked), complete all as specified and as directed.

M&L for laying 40-50 mm thick Machine cut sand stone slabs as in Plinth protections laid over 20 mm thick cement sand screed in CM1:4 over 50 mm thick PCC all as specified and directed incl filling the joints of sand stone slabs with neat cement mixed with pigment to match the shade of slabs incl demolation of concrete, complete all as specified and as directed.

M & L providing 35 mm thick pre-cast cement concrete 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in louvers & jallies (measured solid) including all mouldings and including pre-cast frames set in cement mortar 1:6 complete all as specified and as directed.

S & F providing 35 mm thick pre-cast rainforcement cement concrete 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in louvers & jallies any size and shape and fixed in any hight (measured solid) including all mouldings and including pre-cast frames set in cement mortar 1:6 complete all as specified and as directed.

M & L providing precast concrete Posts 100x100mm size & minimum 75 cm height 1:3:6 type C0 using 12.50 mm graded stone aggregate as in RCC jali post setting in mortar 1:6 , complete all as specified and as directed.

Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, chajja, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc, complete all as specified and as directed.

M&L for fixing MS 12 mm dia TMT bars by way of stitching ( welding ot tieing with existing reinf) incl drilling holes etc & securing ends in walls etc , complete all as specified and as directed.

M&L for cleaning the existing reinf of slabs , chajjas etc & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface etc.,complete all as specified and as directed.

M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack, complete all as specified and as directed.

M&L for 15 -20 mm thick rendering in CM 1:1:2 using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand of over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat, complete all as specified and as directed.

M&L for 5 mm thick rendering in CM 1:3 on ceiling & finishing the surface even & smooth w/o using extra cement, complete all as specified and as directed.

M&L for 10-15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & smooth , complete all as specified and as directed.

S&F GI chicken wire mesh of 0.71 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC chajjaS&Fascias, wall, ceiling etc., complete all as specified and as directed.

Excavation in trenches not exc 1.50m wide and not exc 1.50m depth and getting out in soft/loose soil ext complete all as specified and directed.

S & F 150 mm bore Reinforced cement concrete pipes, one end socketed, class NP2, laid in trenches and jointed complete all as specified and as directed by Engineer in charge.

M&L for cement concrete (1:3:6) type C-2, using 40mm graded stone aggregate bed to drain pipe 150 mm dia including packing under and hunching against the pipe after they are laid including necessary formwork, complete all as specified and as directed.

Returning, filing in including, lelveling,watering and well ramming in layers not exc 25cm thick each, complete all as specified and as directed.

Removing excavated material to a distance not exc 50m depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engr -in- Charge.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B1 using 20 mm graded stone agg as in copings, kneelers, apex stones, bed plates, kerbs lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, not provided including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

S&F 75mm thick Jodhpur type stone slab not exc 2m in length machine cut all face & along exposed edged size faced both sided as in manhole cover, Chajja, landing, selves etc complete all as specified and as directed by Engr-in-charge.

Taking out from position framed woodwork as in cupboards/cabinets etc with all fittings ,shutters, shelves, drawers etc in any position fixed in walls or floors & removal of the rubbish outside MD land all as directed at site for overall sizes exc 0.50 sqm but nexc 1.50 sqm & depthd nexc 60 cm , complete all as specified and as directed.

M&L for Providing and fixing polyvinyl chloride (PVC) sheet frame of width 150 mm & 18 mm thickness made out of extruded 18mm PVC sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge.

M&L for 18 mm thick solid PVC sheet UPVC Caoted Celuka printed in one of two different colours( with wood grain printed pattern /ivory clour finish) as in kitchen cabinet shutters ,all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc complete all as specified & directed .

S & F 30mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and as directed.

Extra over PVC boards for lipping 1-1.5 mm thick 18 mm wide , complete all as specified and as directed.

S&F degree clip type self closing hinges for cabinets fized with cadimum coated screws all as per sample, complete all as specified and as directed.

S&F 100mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint shutters, complete all as specified and as directed.

S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as per approved smaple, complete all as specified and as directed.

S&F drawer runners folding type with guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawers, complete all as specified and as directed.

M&L for stainless steel tray as per trade pattern of various sizes for drawer to keep the kitchen utensil , complete all as specified and as directed.

S & F PVC cupboard knob fixed with nut , screw and washer of mild steel bright finished size exc. 25 mm dia but n. exc. 50 mm dia (as per sample) complete all as specified and directed.

M&L PCC solid building blocks 10cm thick type B1 1:2:4 set in cement mortar (1:6) all as specified and directed.

Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.

M & L for (concealed) point wiring complete with multistranded copper conductor 1.5 Sqmm PVC insulated unsheathed single core FRLS cable 1100 volt grade, confirming IS 694 & colour code in conduit system of wiring, drawn through in and including non-metalic PVC concealed (including Cutting Chases and make good the distrubed surfaces ) conduit of size not less than 20 mm or med grade as required as site, totally concealed in walls / and surface on floors / ceiling / columns / beam / tie beam etc by means of saddles and clips etc incl all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of CI or 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk / cup washers, for mounting of switches, sockets fan regulators etc incl 1.5 Sqmm FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, all as specified, directed and shown on drgs for The rates of chase cutting on wall done concealed conduit and steel terminal boxes are included in the unit rates all as specified and directed by Engr-in-Charge. One light point controlled by one, one way switch

All as per srl item no. 117.00 One socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch, complete all as specified and as directed.

All as per srl item no. 117.00 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for indpendent point, complete all as specified and as directed.

All as per srl item no. 117.00 here-in-before but with 4.0 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for indpendent point, complete all as specified and as directed.

S&F in replacement of piano type, single pole, one way, 6 amps, 230 volts, complete all as specified and directed.

S&F electric storage water heater of capacity 25 litres BEE 5 star rated including proper installing arrangment on wall surface with suitable Anchor bolt fatser and Geyser connections for hot and cold water supply made of stainless steel wire braided connrtector with chrome finish heavy duty nuts of 15 mm size with suitable lengh etc , complete all as specified and as directed.

S&F exhaust fan, heavy duty metal body, AC single phase 300mm sweep complete with louvers including fixing/grouting of frame & connecting with & including 3 core PVC insulated copper conductor flexible cable of size 23/0.0076 (or eq. Size in mm) from ceiling rose to fan , complete all as specified and as directed.

S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 10 Amps , complete all as specified and as directed.

S&F in replacement of 20.00 mm bore Steel water tubing, medium grade, Galvanized with screwed and socket joints, with all fittings such as short lengths, tees, bends, unions, elbows, reducers etc concealed in wall or laid in floors complete all as specified and directed.

S&F in replacement of 20 mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S&F in Socket, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, ISI Marked complete all as specified and directed.

S&F in replacement of Switch piano type, single pole, one way, 16 amps, 230 volts, ISI Marked complete all as specified and directed.

S&F in replacement of Socket, 6 pin, 6/16 Amp, multipurpose shutter type, 230 volts, ISI Marked complete all as specified and directed

S&F in replacement of PVC Lamp holder,bakelite body, incl with LED 9 watt Lamp, 230 volts, ISI Marked, complete all as specified and directed.

Supplying fixing and replacement of Ceiling rose, three terminals, bakelite body, 230 volts, ISI Marked complete all as specified and directed.

Supply and fixing LED lights fitting 1x 10W, 220V, AC decorative box type with driver, holder including AC decorative box type with driver, holder ISI Marked including,copper conductor cable of suitable size from ceiling rose complete complete, 4 ft long all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including AC decorative box type with driver, holder ISI Marked including,copper conductor cable of suitable size from ceiling rose complete complete, 4 ft long , complete all as specified and as directed.

S&F in replacement of bldg security LED Light Luminaire of 25 Watts having IP 65 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 140-270 Volts with in built surge protectore, toughened glass with and including GI bracket of suitable in length including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with all security light on building wall connecting cable , complete all as specified and as directed.

S&F in replacement of MCB, B Curve type, 10 kA, 63Amp, SPN with over load and short circuit protection, complete all as directed.

Supplying fixing and replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as directed.

Supplying fixing and replacement of MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed by the Engr-in-Charge.

Supplying fixing and replacement of sub main wiring with two runs of 10.0 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incd. one run 10 Sqmm (nominal area) FRLS as earth wire PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 25 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as specified and as directed. Note:- Three runs of 10.0 Sq.mm. FRLS Cable and one run of 25 mm dia PVC conduit pipe shall be measured as one length.

All as per item No.138.00 here-in-above, but Cable size is 4.00 sqmm, complete all as specified and as directed.

M&L for in repairs earthing complete with galvanised steel earth electrode 60cmx60cmx6mm buried directly in ground vertically to depth not less than 2.25m below normal ground level with top edge of the earth plate at a depth not less than 1.5m below ground level connected to and including GI earth lead wire 4 mm dia by means of nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 5 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC (1:3:6) Type C1 in chamber, precast RCC 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 mm dia with cast iron frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed. Note:- (i) The Quated rate is deemed to be inclusive the cost of all earthwork, PCC & 7.5 metre GI pipe for protection of earth lead & 7.5 metre GI earth lead and etc.

Supply, fixing, testing & commissioning of Split type (room) air conditioner electric driven (single phase), cooling capacity 4500 K Cal per hour (1.5 Ton) BEE 5 star rated. 5.2 ISEER or higher. Inverter compressor, with Purification filter, Dehumidifier, Dust Filter, Fast Cooling with Auto Clean (Dew Clean Technology), PM 2.5. Noise level (at 100% cooling capacity), is 38dB Triple Display facility, Copper Condensor coil Ecofriendly Refrigerant of R32, including all necessary accessories i.e., (Copper pipes of suitable size and length, condensed water pipes, outdoor mounting stands, remote controller, etc) required for efficient working, complete all as specified and as directed by Engr-in-Charge. Note:- The quated rate is deemed to be inclusive of all accessories mentioned in item description

Supply and fix Voltage, stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 90 V to 300 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA 4000Wattage complete all as specified and as directed.

M & L for sub main wiring (concealed) complete with two single core 2.50 Sqmm FR LSH PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 2.50 Sqmm FR LSH PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note:- Three runs of 2.5 Sq.mm. FRLSH Cable and one run of 20 mm dia PVC conduit pipe shall be measured as one length.

S&F single pole & neutral sheet metal enclosure with one MCB SP 20 Amps complete all as specified and as directed.

NOTE:- (i)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount (ii) All items in BOQ are for "Materials and labour / Supply and fix" and to be executed in "Repair/Replacement/Renewal" unless otherwise specifically mentioned as "Supply only" or Fixing only" in BOQ Bidders are requested to quote their rates accordingly.

Harsh Enterprises

Pawan Kumar Shrama Contractor

BEYLIM INFRA