Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.1 LAccepted-AOC PITHORAGARH PIN 900 336 C O 56 APO | 900336 | L1 | Accepted-AOC being lowest and reasonable tender | |
| 2 | L2₹27.1 L+₹7.7 L (39.6%)Rejected-Finance | L2 | Rejected-Finance Other than L1 |
Tender Value
₹21.9 L
EMD Value
₹44,000
Closing Date
17 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(P) DEHRADUN
GE(P) DEHRADUN
PETTY REPAIR TO BR AND EM FOR OTM MD ACCN FOR DET C AT EST 22 UNDER GE P DEHRADUN
2023_MES_585713_1
GE P/DDN/08 OF 22-23
Open Tender
Civil Works
Item Rate
270 days
Dehradun
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE(P) Dehradun
₹44,000
Yes
23 May 2023
14 Mar 2023
19 Apr 2023
14 Mar 2023
17 Apr 2023
28 Mar 2023
Amount
Demolition of brick /stone work , built in cement mortar or cement lime mortar including all quions, arches, pillars, etc including demolition of precast rcc articles and disposal of debris out of MoD land complete all as specified and directed.
M&L Brickwork old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.
M&L Brickwork old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
Demolition of cement concrete or lime concrete (unreinforced) in ground floors and Pavings not exc 15 cm thick (below or above ground level ) and removing the debris outside from defence land complete all as specified and directed .
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises and removing the debris outside from defence land complete all as specified and directed .
M & L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in sub base, to receive surface of tile complete all as specified and directed.
M&L Granite(of any Type) tiles 20 mm thick machine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone inclunding grinding and polishing ,15 mm CM 1:4 screed bed or bedding layer of mortar,for laying floor finishes/ tiles complete as per spectifed and directed
Material and labour for coloured Glazed ceramic tiles in vertical surface such as dado etc 450mmX 300mmX 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete (required in patches not exc 2 Sqm to be done in daily complaints) all as specified and as directed. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.
Supply and fix joint free non skid coloured Ceramic tiles 08mm to 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete (required in patches not exc 2 Sqm to be done in daily complaints) all as specified and directed. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.
Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc including necessary scaffolding up to four storeys height of bldgs if required and removing of debris out of MoD land complete all as specified and as directed.
M&L for 15mm thick rendering on other than fair faces of brick/ concrete surfaces in CM 1:6 finished even and without using extra cement complete allas specified and directed
M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM 1:4 finished even and fair without using extra cement complete allas specified and directe
M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and as directed.
M&L for preparing old plastered or unplastered wall surfaces and applying two coat of Liquid Acrylic exterior emulsion Paint (Apex) as specified and directed.
Material and labour for preparation of newly plastered internally surfaces of wall and applying a one coat of wall care putty on the surfaces & making the surface absolutely smooth surface and applying one coat of primer (as per manufacturer’s recommendations) on the surfaces and applying two coats of distemper oil emulsion finished without any brush marks on the surface in any colour including necessary scaffolding up to four storeys height of bldgs if required ,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed.
Material and labour for complete removal of existing treatment internally surface of wall and applying one coat thick wall care putty on the surfaces and making surface absolutely smooth and applying one coat of primer (as per manufacturer’s recommendations) on the surfaces and applying two coats of distemper oil emulsion without any brush marks on the surface in any tint including necessary scaffolding up to four storeys height of bldgs if required ,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed.
Material and labour for preparation of old painted steel and iron surfaces of any description over 10 centimeter width or girth and applying one coat of synthetic enamel paint in any colour finished without brush mark on surface including necessary scaffolding up to four storeys height of bldgs if required,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed.
Taking down chowkhats or frames exc 1.50 and n.exc 4 Sqm each (without talking off shutters from the freme) complete all as specified and directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site.
S&F IInd class hard wood, 35mm thick skeleton shutters open rebated & prepared to receive, glass, gauge etc. (without sash bars), edge of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkahts. Complete all as specified and directed.
S&F IInd hardwood 40 mm plain framed pannelled shutter (any number of pannels) with panels of timber flats on bothe sides (feather edged) or of veneered particle board medium density wood particle board with commerical face veneers supplied and fitted to chowkats
S & F pressed steel frames 125 x 60 x1.25 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plate including one shop coat of primer complete all as spd and directed
M & L for cement concrete type C-0, 1:3:6 using 12.5 mm graded crushed stone aggregate as in back filling of hollow portion of frame with plain cement concrete and for fixing of hold fast complete all as specified and directed.
Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed.
Supply and fix in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed.
Supplied only 3 mm thick sheet glass ordinary quality and glazing with oil putty wire clips in square n.exc 0.5 sqm in each pane upto tripple story building complete all as specified and directed.
Supplied and fixed in repair 3mm thick figured glass, pin head type and glazing with oil putty in square n-exc 0.5 sqm in each pane upto tripple story building complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.
M&L for preparation of previously untreadted surfaces old wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint all as specified.
Supply & fix solid PVC door frame of size50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening as per specification & drawing complete all as specified & directed.
Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC, ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II).
Supplied and fixed stainless steel butt hinges of size 100mm long for fixing to door shutter etc complete all as specified and directed.
Supply and fix Aluminium, anodised, barrel tower bolts of extruded section and fixed, Length of bolt in 150mm complete all as specified and directed
Supply and fix Aluminium, anodised, barrel tower bolts of extruded section and fixed, Length of bolt in 200mm complete all as specified and directed
Supply and fix in repair Aluminium, anodised, barrel tower bolts of extruded section and fixed, Length of bolt in 150mm complete all as specified and directed
Supply and fix in repair Aluminium, anodised, barrel tower bolts of extruded section and fixed, Length of bolt in 200mm complete all as specified and directed
Supply and fix Aluminium handles, cast type, anodised Size of handle in 150mm complete all as specified and directed.
Supply and fix in repair Aluminium handles, cast type, anodised Size of handle in 150mm complete all as specified and directed.
Supply and fix in repair Aluminium handles, cast type, anodised Size of handle in 125mm complete all as specified and directed.
Supply and fix Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed Length of bolt in 250 mm complete all as specified.
Supply and fix in repair Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed Length of bolt in 250 mm complete all as specified.
Supply and fix Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor Overall length of cover plate 140mm complete all as specified and directed.
Supply and fix in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor Overall length of cover plate 140mm complete all as specified and directed.
Supplied and fixed 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate including welding to steel frames.complete.
Supply and fixing 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, provide 10 numbers stainless steel rings with 50 mm dia and proportionate for part there off, with stainless steel brackets near to ends with stainless steel finish for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings)
Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.
Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.
Supplied and fixed 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.
Supplied and fixed 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.
Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed
Supplied and fixed in repair Gun-metal, globe or gate valves 15mm bore, with iron wheel head, screwed both end for iron pipe
Supplied and fixed in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe
Supplied and fixed in repair Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe & fixed. (min. weight 20mm-210 gms)
S & F in repair 15 mm bore long body CP Bib taps cast copper alloy fancy type with capstan heads (chromium plated),and cup screwed down , high pressure for iron pipe complete all as spd & directed.
Supply and fix in repair CP stop cock/angle valve cast copper alloy screwed down high pressure ,with crutch or butterfly handle screwed both ends for iron pipe or for union of 15 mm bore complete all as specified & directed
Supplied and fixed in repair stop valves (ISI marked), 15mm dia, cast copper alloy,chromium plated fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.
Supply and fix for in repairs Swan neck CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed.
Supplied and fixed in repairs Brass CP shower rose 125mm size including fixing to steel pipe or union complete all as specified and directed.
Supplied and fixed in repairs Tubular towel rail, ISI marked 60cm long between flanges , 20mm dia 'D' type Brass Chromium plated incl brackets, fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
Supplied and fixed in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
Supply and fixing in repair Vitreous China wash down water closet pan including P or S trap of bore 125/110 mm (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat, white or in matching colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and wash down water closet complete all as specified and as directed.
Supply and fixing in repair viterous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, witht integral foot rests (excluding flushing cistern and flush pipe) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified and as directed.
Supplied and fixed in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets ,fush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specfied and as directed.
Supplied and fixed in repairs Viterous China wash basin, white, flat back, size 550x400mm excluding taps etc but including brackets,including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specfied and as directed.
Supplied and fixed in repair 15mm dia 600 mm long PVC connection including brass check nut at both ends screwed both end for iron pipes.
Taking down eaves gutter and rain water pipe any size any pattern , PVC/ AC pipe including all fittings ,heads shoes, bends etc including removal to store ,Internal dia of pipe in 75MM/110mm complete all as specified and directed.all as specified and directed.
Supplied and fixed PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls all as specified and directed.
Supplied and fixed PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls all as specified and directed
Supplied and fixed PVC (SWR) bends any radius 75mm dia all as specified and directed.
Supplied and fixed PVC (SWR) bends any radius 110mm dia all as specified and directed.
Supplied and fixed PVC (SWR) bends any radius 75mm dia all as specified and directed.
Supplied and fixed PVC (SWR) bends any radius 110mm dia all as specified and directed.
S & F in repairs 75mm PVC floor trap, ISI marked with CP grating with/without waste pipe hole incl jointing to waste pipe fixed with solvent cement complete all as specified and as directed.
S & F in repair Bib tap15 mm standard of PTMT any colour screwed for iron pipe (Minimum weight 15mm-90gms)
S & F in repair 15 mm Stop valve of PTMT any colour high ressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms)
S & F in repair15 mmPillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms
S & F in repair Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms)
S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm
S&F in repair Door cill powder coated aluminium of 900mm size screwed down to shutters complete all as specified and directed.
S&F in repairs cast iron bib taps, 15mm bore screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed
S&F in repair soap dish 160mm (min weight 390 grams) length of stainless steel fixed to wall complete all as specified and directed
S & F in repair CP toilet paper holder complete all as specified and directed
S&F in repairs 15mm dia CP Health faucet with flexible pipe not less than 90 cm long fixed to EWC suitable complete all as specified and directed at site
Supply and fixing in repairs looking mirror with PVC moulded frame and hard board back (colour of frame as directed) of size 450mm x 600mm x 6mm thick complete all as specified and directed.
S & F in repair door closer hydraulically regulated, designation No. 3, universal type, Aluminium body suitable for door shutter of 851 to 1000mm in width & of weight between 61 to 81 kg & fixed
S & F in repair Plastic water closet seat cover, white closed pattern with flat bottom and cover and Brass chromium plated hinging device .
S & F Flush pipe of polyethylene of low or high density of PVC, 32mm dia for low level cistern fixed in repair
M & L for 75mm thick plain cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in sub base complete all as specified and as directed. Note:- Finishing surfaces of concrete to be even and rough to receive the topping layer.
M&L Chequered cement concrete tiles 20 cm X 20 cm X 25 mm thick,set jointed and pointed in neat cement slurry and with grey pigment cement and pigments in floors as per specified and directed
M&L for 100 mm thick cement concrete type B-2 1:2:4 (using 40 mm graded stone aggregates) as in floors Completel all as specified and directed.
M&L replacement in existing point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated sheathed multi stranded copper conductor cable 1100 volts grade, FRLS-H grade in and including suitable size of rigid PVC conduit with accessories such as junction boxes, bends, tees etc with suitable size of sunk type cast iron or pressed steel teRMinal box 1.2mm thick, duly painted for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover/modular cover with frame, including contineous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS-H grade, green colour, up to common earth and connected to earth dolly including taking down old point wiring any type with accessories complete all as specified and directed by Eng.-in-charge for the following. (Note: (i) Colour code shall be maintained as per IE rule (ii) Point wiring with modular metal flush box will be provided where required (iii) Make of PVC conduit : AKG/Polycab/Kalinga (iv) Make of Copper Cable : RR Kabel/Finolex/Polycab) (a) One light/fan/bell point controlled by one, 1-way switch/bell push.
(b) One light point controlled by two 2 -way switches.
(c) One three pin 5 Amp socket on same board with other switches.
(d) One three pin 5 Amp socket on independent board
(e) All as per item No 2.00 above but one 3 pin socket outlet 15 Amp independent, with cable 2.5 Sq mm size, with earth continuity coductor of size 2.5 Sq mm.
M&L for circuit/submain wiring alongwith earth wire with the following sizes of FRLS-H, PVC insulated sheathed, 1100 Volts grade, single core copper conductor cable, in and including new conceiled PVC conduit/ Casing Caping as required with accessories such as junction boxes, bends, tees etc. on surface/recessed complete all as specified and directed by Eng-in-charge (Note: Colour code shall be maintained as per IE rule) :-2x4.0 sq. mm + 1x4.0 sq. mm earth wire
2x6.0 sq. mm + 1x6.0 sq. mm earth wire
4x10.0 sq. mm + 1x10.0 sq. mm earth wire
S&F in repairs complete all as specified & directed for the following items :- Modular switch 1 way 10 A 1 module.
Modular bell push, 10 A, 1 module,
Modular switch 2 way 10 A 1 module,
Modular switch 1 way 16 A 1 module,
Modular socket 6 A- 2/3 pin combined 2 module
Modular socket 6/16 A- 2/3 pin combined 2 module,
Modular cover plate with frame 1-2 module complete,
Modular cover plate with frame 3 module.
Modular cover plate with frame 4 module.
Modular cover plate with frame 6 module.
Modular cover plate with frame 8 module.
Modular cover plate with frame 12 module
Modular metal flush box 1-2 module, 1.2 mm thick.
Modular metal flush box 3 module, 1.2 mm thick
Modular metal flush box 4 module, 1.2 mm thick
Modular metal flush box 6 module, 1.2 mm thick
Modular metal flush box 8 module, 1.2 mm thick
Modular metal flush box 12 module, 1.2 mm thick
Modular surface mounted plastic box 1-2 module.
Modular surface mounted plastic box 3 module.
Modular surface mounted plastic box 4 module.
Modular surface mounted plastic box 6 module.
Modular surface mounted plastic box 8 module.
Modular surface mounted plastic box 12 module.
Modular blanking plate 1 module
Modular fan regulator, 120 watt - 2 module.
S&F switch piano flush, button type 5 Amp SP 240 V AC complete all as specified & directed.
S&F switch piano 2-way flush type 5/6 Amp SP 240 V AC complete all as specified & directed.
S&F switch piano flush button type 15 Amps SP 250 V AC complete all as specified & directed.
S&F Bell push, flush type, 5 amp SP 240 V AC complete all as specified & directed.
S&F socket outlet multipurpose 5 Pin 5 Amp 250 V AC complete all as specified & directed.
S&F socket outlet two in one 6 pin 5 Amp and 15 Amp flush type complete al as specified.
S&F fan regulator electronic step type, 100 watt
S&F Ding dong bell AC 230 V single pole Make Cona/Anchor/Kinjal
S&F Buzzer bell AC 230 V single pole Make Cona/Anchor/Kinjal
S&F Ceiling rose, 3 teRMinal/PVC/polycarbonate, isolated body 230 V AC.
S&F Capacitor 2.5/3.15 mfd 230 Volts
S&F Switch socket combination outlet 5 A , 5 pin box type
S&F Switch socket combination multipurpouse 2 in 1 , 5/15 A box type
S&F battern holder/ angle holder AC 230V B-22 cap
S&F Plug top 5 Amps 3 pin
S&F Plug top 15 Amps 3 pin
S&F LED lamp 10W B22 type, AC 230V, Make- Crompton LED 9W - B22 - CDL
S&F LED lamp 7W B22 type, AC 230V Make- Crompton LED 7W - B22 - CDL
S&F in repairs complete all as specified & directed for the following items :- MCB SP 6 to 32 Amps, 240V, 10KA, B Curve.
MCB SPN 20 to 32 Amps, 240V, 10KA, C Curve.
MCB SPN 40 to 63 Amps, 240V, 10KA, C Curve.
MCB TPN/FP 63 to 100 A, 415 V,B/C Curve.
S&F in replacement sheet metal enclosure powder coated, DB with double door complete all as specified & directed for the follwing size :- DB SPN 4 way, 240V with 100 amps rated bus bar
ditto al as above but for DB SPN 8 way, 240V with 200 amps rated bus bar
ditto al as above but for DB SPN 12 way, 240V with 200 amps rated bus bar
Sheet metal enclosure with socket plug top and MCBs single pole and neutral with a two pin and earth plug and socket complete with single pole neutral MCB of 20A, 240V.
DB TPN ,4 way, 415 V 200 amps rated bus bar suitable for incomer MCCB upto 160 Amp and outgoing MCBs SP.(Note :- MCCB and MCBs will be measured and paid under respective item)
Taking down exhaust fan of any make/model and sweep for ovehauling/servicing, cleaning and lubricating movable parts with suitable lubricating oil/grease and refixing at site at same/different location and connection complete from ceiling rose with new flexible copper cable of suitable size, testing commissioning after completion of the work. Note : The accessories such as rewinding and capacitor will be measured and paid in respective item
M&L for rewinding of exhaust fan of any make/model/sweep including removal of existing burnt winding carefully from slots, cleaning the slots throughly with suitable cleaning agent, applying slot insulation and rewinding with enamelled copper conductor of same gauge/same number of turns as that of existing and connecting the coil suitable to operate on 230 V, single phase, AC supply, peRManent capacitor type, tapping the winding and applying air drying the winding throughly and all as specified and directed.
M&L Copper cable cord flexible 3 core PVC insulated and overall PVC sheathed of size 2.5sqmm fixed in repair for making connection of Gyesers complete all as directed.
Heating element for geyser 1500/2000 watts round /triangular Type
Geyser indicator in red/green colour neon type 230 volts
TheRMostat controlled switch for controlling temperature range 30 degree celcius to 70 degree celcius for 25/50 ltrs geyser
S& F water connection pipe for geyser 450mm long braided stainless steel suitable for hot & cold water supply CP brass screwed nuts at both end swith washers complete all as directed.
S&F LED Tubelight with integral LED driver 4ft 20W ,230V,AC.
Tube light holder suitable for any tube rod LED type.
S&F LED Tubelight with integral LED driver,2ft, 10W,230V,AC.
Supply and fixing LED luminaire 600 mm x 600 mm, 42 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
Supply and fixing round/square shape 12 watt 220 volts AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.
S&F LED light fitting 10/9W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
S&F LED decorative wall light luminaires including LED bulb 10W B-22 holder and White/waRM white connecting up with three core flexible copper conductor cable of suitable size complete. Make: Philips model Comet or equivalent in crompton/Havells
LED ceiling light Driver Suitable for 6W-36W LED panel light
Excavation in trenches soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out excavated soil/sand/unseviceable LT Cable for laying of cable and getting out.
Excavation in trenches hard dense soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out excavated soil/sand/unseviceable LT Cable for laying of cable and getting out.(For road cutting)
Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in hard /loose soil complete all as specified and directed by Engr-In-Charge.
Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified.
M&L for Sand cushioning and covering of UG cable using crushed metal sand in trenches for cable protection all as specified
M&L for laying reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm to U/G cable laid dry flat over the cable with width equal to length of the cable and abutting each other with gap between adjacent slab not exceeding 10mm over under ground cable for cable protection in trenches all as specified and directed by Engineer-in-Charge.
Supplying and laying Bricks common burnt clay building bricks, old size sub-class ‘A’ designation 75 in trenches as protection of under ground cable all as specified and directed.
M & L for Plain cement concrete 1:2:4 type B1 using 20mm graded aggregate for coping to pole foundation including necessary foRM work with fair finished surface all as directed.
M & L for Plain Cement concrete 1 : 4 : 8 type D2 using 40 mm graded stone aggregate for pole foundation, filling and mass concrete all as specified.
LED Driver suitable for street light 25-70 Watts.
LED Driver suitable for street light 90-120 Watts.
S & F GI Bracket for security lights made out of medium grade GI Pipe 50mm dia 1.5 mtr long bend to shape as directed, fixed on walls with two Nos MS clamp/saddles as required at site including nuts, bolts and washers and all as specified and directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including theRMal management in multiple optics complete with IP 65/66 protection complete.
Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including theRMal management in multiple optics complete with IP 65/66 protection complete.
Supply and fixing burrial LED type 20 watt 230 watt volts AC outdoor type with 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver complete. Make Philips-BBP343 LED1800/WW 18W 20D 100-240V or equi in Crompton/Bajaj/Wipro
S&F fuse box sheet metal enclosure made out of SMC junction box front openable and of size 300 X 250 X 100 mm having bakelite connector suitable for 3 phase and neutral link including MCB SP 6 amps fixed to pole with MS 25X3 mm GI clamps made to shape with required nut bolt washers etc. for street light fittings.
Taking out old unserviceable Service wire and Supply and fix 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable flat or circular complete all as specified for the following size 6.0 Sqmm size
10.00 Sqmm size
S&F in repairs complete all as specified & directed for the following items :- MCCBs 63 A, 415V, 16KA, 4 Pole
MCCBs 100/125 A, 415V, 25KA, 4 Pole
MCCBs 160 A, 415V, 25KA, 4 Pole
MCCBs 250 A, 415V, 36KA, 4 Pole
Supply and fix in replacement on-load changeover switch 415 V, 4 pole, 125 A.
Supply and fix in replacement on-load changeover switch 415 V, 4 pole, 250 A. open execution
Supply and jointing Straight through joint for LT cable PVC/XLPE insulated aRMoured aluminium conductor of 1100 volts grade complete with jointing kit for the following size. Make: Raychem/3 M/Denson/ 10-16 sqmm 3.5/4 core
25 to 50 Sq mm x 3.5 core
Supply and jointing indoor/outdoor heat shrinkable type end teRMination kit for LT cable PVC/XLPE insulated aRMoured aluminium conductor of 1100 volts grade complete with jointing kit for the following size. Make: Raychem/3 M/Denson 10-16 sqmm 3.5/4 core
25 to 50 Sq mm x 3.5 core
70 to 95 Sq mm x 3.5 core
Supplying and laying (in trenches/duct/fixing to pole/wall or in such similar position ) in replacement of extg u/s GI tubing medium grade for cable protection of following sizes:- (a) 40 mm dia
(b) 80 mm dia
(c) 50 mm dia
Supply & fix in replacement aluminium strip 25x3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground all as specified and directed.
Supply & fix in replacement galvanised iron strip 32 x 6 mm burried in ground all as specified and directed.
Supply & fix in replacement air teRMination single pointed aluminium rod 12mm dia and 300mm long all as specified and directed.
Supply & fix in replacement test point teRMinal block made of gun metal or phosphorous bronze size 75x75x25mm drilled and screwed includind 3 nos 8mm dia 25mm long hex head screw all as specified and directed.
Supply and lay in replacement of UG cable XLPE insulated aRMoured and PVC sheathed LT 1100 volts grade with aluminium conductor stranded including taking up U/S LT UG cables from trench/poles/wall etc of following sizes :- (a)10Sqmm 2 core
(b) 10 Sqmm 3 core
(c) 10 Sqmm 4 core
(d) 16 Sqmm 4 core
(e) 25 Sqmm 3.5 core
(f) 35 Sqmm 3.5 core
(g) 50 Sqmm 3.5 core
Supply and fix in repair aluminium cables lugs for LT cables including necessary crimping with crimping tool complete all as specified and directed for th following size:- (a) 10-16 Sqmm
(b) 25 Sqmm
(c) 35 Sqmm
(d) 50 Sqmm
(e) 70-95 Sqmm
Supply and fix in repair aluminium cables sector connectors LT cables including necessary crimping with crimping tool complete all as specified and directed for the following size:- .(a) 10-16 Sqmm
(b) 25 Sqmm
( c) 35 Sqmm
(d) 50 Sqmm
(e) 70-95 Sqmm
Supply and fix in repair copper lugs for HT cables including necessary crimping with crimping tool complete all as specified and directed for 95 Sqmm size.
Earthing complete with GI earth electride of size 60cmx60cmx6mm buried directly in ground vertically at a depth not less than 2.25 metre below noRMal ground level wuith top edge of earth plate at a depth not less than 1.5 metre below noRMal ground surrounded from all sides by 15cm thick and packed layer of charcoal dust and conmmon salt filling in alternate layers cleaned connected to and including GI earth strip 32 x 6mm size upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected light grade 50mm dia 5 mtr long GI pipe connected to main control board and GI pipe light grade 20mm bore for watering and including funnel wire mesh, RCC pit cover 50mm thick with 10mm dia reinforcement 100mm c/c and PCC chamber pit with pcc 1:2:4 Type C2 (including excavation and earth work disposal of surplus soil to a distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part -I 2009
S&F Anti-climbing device spikes type fabricated out of M.S. bars (round, square and flat) including nuts, bolts, washers and welding in two halves made to shape to suit the cross section of the pole
Unique Associates
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .