Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.6 LAccepted-AOC 97 ABROL NAGAR PATHANKOT 145001 PB | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Award of Contract | |
| 2 | L2₹15.9 L+₹86,953.80 (5.78%)Rejected-AOC | L2 | Rejected-AOC Other than lowest | |
| 3 | L3₹17.0 L+₹1.9 L (12.9%)Rejected-AOC | L3 | Rejected-AOC Other than lowest | |
| 4 | L4₹19.3 L+₹4.2 L (28.0%)Rejected-AOC | L4 | Rejected-AOC Other than lowest |
Tender Value
₹21 L
EMD Value
₹42,000
Closing Date
4 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE YOL
HEADQUARTERS COMMANDER WORKS ENGINEERS YOL
COMPREHENSIVE MAINT TO BLDG IN TIRAH LINE AT MIL STN DHARAMSHALA
2024_MES_663647_1
CWE/Y-28/2024-25
Open Tender
Civil Works
Item Rate
180 days
DHARAMSHALA
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
AGE (I) DHARAMSHALA
₹42,000
Yes
19 Oct 2024
3 Jul 2024
12 Sept 2024
3 Jul 2024
4 Sept 2024
17 Jul 2024
Amount
Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thick above or below ground level complete and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.
Demolition of brick work or stonework built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings ,dressed stonework and precast concrete articles and stacking the serviceable materials within 100m and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.
Taking down cement plaster including backing etc from brick/stone walls / concrete surfaces including raking out joints, hacking for key , scrubbing down with water etc complete all as specified and directed
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premises. complete all as specified and as directed.
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc, laid , bedded and pointed in any mortar, complete all as specified.
Dismantling plain or corrugated steel sheets any gauge thickness including Nanital or similar pattern roof covering including ridges complete all as specified and directed.
Taking down and removing chowkats with shutters (without taking off shutters from chowkat) not exceeding 1.50 Sqm each complete all as specified and directed.
Taking down and removing chowkats with shutters (without taking off shutters from chowkat) exc 1.50 Sqm but not exc 4.00 Sqm each complete all as specified and directed. .
Taking down steel water tubing 15 mm bore including all fitting and connections complete all as specified and directed.
Taking down steel water tubing 20 mm bore including all fitting and connections complete all as specified and directed.
Taking down Shutters of any description not exc 1 sq. m each and removing from site, complete all as specified and directed. .
Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each and removing from site, complete all as specified and directed. .
Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
Dismantling water tanks of capacity exceeding 250 Litres but not exceeding 500 Litres, complete all as specified and directed.
Dismantling water tanks of capacity exceeding 500 Litres but not exceeding 1000 Litres, complete all as specified and directed.
Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1, depth of embedded porion exc half brick but not exc one brick , complete all as specified.
Walling of squared rubble stone masonry, brought upto courses, well bonded, bedded and soilidly hearted built in CM 1:4, complete all as specified and directed.
2nd class hardwood (Sal) plain solid straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
35mm thick second class hardwood (Sal/Hollock) factory made plain framed panelled shutter (two panel) with lock rails & panel of 9 mm B.W.P commercial ply wood or 12 mm thick veneered particle board with commercial veneering on both side. The size of rail and stile as per IS:1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.
35 mm thick 2nd class softwood glazed & skeleton factory made shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass, etc, sizes of members of door shutters as specified in SSR- 2009 Part-I Section 8.24(a) complete all as specified and directed.
30 mm thick 2nd class softwood glazed & skeleton factory made shutters, open rebated and prepared to receive glass, gauze etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass, etc, sizes of members of door shutters as specified in SSR- 2009 Part-I Section 8.24(b) for wndoe/ventilator shutters complete all as specified and directed.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing as shown on page No 176 to 183 of MES SSR-2020 Part-II compete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails.M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Pane of 4 mm thick sheet glass to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ), and joined together with solvent cement, suppling & fixing in the frame at site, complete as shown on page No 176 to 183 of MES SSR 2020 Part-II compete all as specified and directed.
Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.
Extruded aluminium alloy handles, fabricated type, anodised of size 100 mm complete all as specified and directed.
Extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.
Aluminium anodized barrel tower bolt of extruded section of size 100 mm and fixed complete all as specified and directed.
Aluminium anodized barrel tower bolt of extruded section of size 150 mm and fixed complete all as specified and directed.
300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
Mild steel butt hinges of size 100mm medium weight cold rolled complete all as specified and directed.
Mild steel butt hinges of size 75mm medium weight cold rolled complete all as specified and directed.
Galvanished mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanished wire staples complete all as specified and directed.
Galvanished mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanished wire staples, fixed in repair complete all as specified and directed.
300mm, Mild Steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
Continuous (piano) hinges,mild steel, bright finish or electrogalvanised, width of flap 30mm (when opened), complete all as specified.
75mm size hasp and staple aluminium anodised, wire type stone enameled black including bolt to hinge plate and fixed with screws complete all as specified and directed.
Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.
Sheet glass, 4 mm thick ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm each pane complete all as specified and directed.
18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, as in cup board shutters, partitians and shelves, fixed in repair complete all as specified.
18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, as in cup board shutters, partitians and shelves, complete all as specified.
External teak wood lipping, 6mm thick fixed with nails for 18/19mm thick particle board, complete all as specified.
2nd class hard wood, clean sawn, timber fixed as in scantling including dismantling old scantling complete all as specified and directed.
20mm thick, 2nd class hardwood boarding, planed one side with butt joints , fixed with nail in any situation (except flooring and skirting) including dismantling old boarding complete all as specified and directed.
40mm thick, 2nd class hardwood boarding, planed one side with butt joints , fixed with nails int flooring and skirting including dismantling old boarding complete all as specified and directed.
Plain fillets of 2nd class hard wood, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 13 & not exc 25 sq.cm, complete all as specified & directed.
Plain fillets of 2nd class hard wood, bullnosed, splayed, chamfered or rounded on one edge or face, clean sawn, secured with nails or brads of sectional area exc 6 & not exc 13 sq.cm, complete all as specified & directed.
Plain fillets of Ist class hard wood, bullnosed, splayed, chamfered or rounded on one edge or face, clean sawn, secured with nails or brads of sectional area exc 3 & not exc 6 sq.cm, complete all as specified & directed.
4mm thick non asbestos fibre cement building board fixed in ceiling fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified & directed. Note : The board shall be as per IS-14862 and shall be manufactured from homogeneous mixture of cement, quartz and cellulose and shall be cured with high pressure steam using auto claving process
0.63 mm thick, galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with with L-type or J-type or cranked hook bolts , in roofs, walls etc. with grade of zinc coating 275 gms per sqm complete all as specified and directed.
All as per item no 51 above but except sheeting
0.63 mm thick, galvanised, plain mild steel sheeting as in ridges, hipe, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 gms per sqm complete all as specified and directed.
Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, all as specified and directed.
All as per item no 54 above but except sheeting
Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips, valley/ eaves/ rain water gutters, drip and straight flashing (length and girth as fixed), fixed with self tapping screws all as specified
1.60mm thick, Mild steel, plain, black sheet in hearths, covering to door shutter cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, complete all as specified.
4mm thick, figured glass pin head type and glazing with oil putty in squares n.exc 0.5 sqm each pane complete all as specified and directed.
Mild steel works as Bands, straps, supports or stays including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
Mild steel works as in flat iron fillets (for securing wire mesh etc.) fixed to fly proof steel window shutters including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ccomplete all as specified and directed.
Rolled mild steel work in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming toFe-410- W(Gde- E-250) quality- A, complete all as specified and as directed.
Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.
Rolled Mild Steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe.290.Gde-E-165 complete all as specified and directed.
Harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc, complete all as specified.
25 mm thick PCC 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregates) as in floor finish, surface finished even and fair to receive top finish complete all as specified and directed.
Plain cement concrete 1:3:6, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 75mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen and two parts of heated coarse sand (by volume), all as specified. Note:- The unit rate include for use of form work (straight or curved).
Vitrified ceramic tiles (light shade) 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm as directed by EIC, as in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. Size/Shade/Colour of tile shall be approved by the AGE(I).
Vitrified ceramic tiles (light shade) 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick cement screed in cement mortar 1:3 complete all as specified and directed. Shade/Colour of tile shall be approved by the GE.
Mat finish, premium quality, joint free (edge cut), coloured/ printed Non -Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed. Size/Shade/Colour of tile shall be approved by the GE.
Glazed ceramic coloured tiles of size 450mm x 300mm x 7mm thick as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick cement screed in cement mortar 1:4 complete all as specified and directed. Shade/Colour of tile shall be approved by the GE.
Glazed ceramic coloured tiles of size 300mm x 200mm x 7mm thick as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick cement screed in cement mortar 1:4 complete all as specified and directed. Shade/Colour of tile shall be approved by the AGE (I).
20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick cement screed in cement mortar 1:4 complete all as specified and directecomplete all as specified and directed.
Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite., complete all as specified and directed.
Machine cut kota stone slab flooring 20-25 mm thick of size not less than 550 mm X 550 mm as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in floor etc, laid over and including 15mm screed layer in cement mortar 1:4, cutting, rubbing, grinding and polishing to achieve mirror finish, laid over PCC subbase complete, all as specified.
Machine cut kota stone slab flooring 20-25 mm thick as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab,as in in skirting, dados, risers to steps etc, laid over and including 10mm thick rendering in cement mortar 1:4 , cutting, rubbing, grinding and polishing to achieve mirror finish complete, all as specified.
Rendering cement plaster 10mm thick in cement mortar 1:4 on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, all as specified.
Rendering cement plaster 15mm thick in cement mortar 1:4 on stone masonry or surface other than fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, all as specified.
Preparation of new wooden surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Preparation of new wooden surfaces of any description, not exc 10cm in width or girth when unconnected with other painting or when painted in different tint and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Preparation of old wooden surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Preparation of old steel surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.
Preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer over and including a coat of 2 mm thick wall care putty complete, all as specified and as directed by Engr-in-Charge
Preparation of old plastered surfaces or un plastered, ceiling surfaces and applying two coats of white wash, complete all as specified and directed.
Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of cerosote oil , complete all as specified and as directed.
Preparation of old decorated surface of walls, scrapping down by mechanical sander with internal dust extraction system for clean environment certified by manufacture smoke soot, moulds moss and if efflorescent salt and trading oil and greasy spot down and stopping etc. and applying one coat of oil bound distemper applied using airless spray technology and capable of operating single spray gun with suitable hose length the spray machine should be reputed manufacture with pro-guard technology and capability of tracking pressure as well as paint and primer usage incl cleaning the floor , joinery, surfaces usage complete all as specified and directed. Note : Work shall be executed through Company authorised OEM.
Complete removal of existing treatment of old surface including scrapping down by mechanical sander with internal dust extraction system for clean environment certified by manufacture smoke soot, moulds, moss and if efflorescent salt and trading oil and greasy spouses and cleaning with water on wall and preparation of plastered surface of walls and applying two coats of oil bound distemper over 02mm thick wall putty for smooth surface applied using air less spray technology and capable of operating single spray gun with suitable hose length the spray machine should be reputed manufacture with pro-guard technology and capability of tracking presSure as well as paint and primer usage complete all as specified and directed by Engr-in-charge. Note : Work shall be executed through Company authorised OEM.
Preparation of old decorated surface of walls, scrapping down by mechanical sander with internal dust extraction system for clean environment certified by manufacture smoke soot, moulds, moss and if efflorescent salt and trading oil and greasy spot down and stopping etc. and applying one coat of cement based paint First quality) applied using airless spray technology and capable of operating single spray gun with suitable hose length the spray machine should be reputed manufacture with pro-guard technology and capability of tracking pressure as well as paint and primer usage incl cleaning the floor ,joinery, surfaces usage complete all as specified. Note : Work shall be executed through Company authorised OEM.
Preparation of old decorated surface of walls, scrapping down by mechanical sander with internal dust extraction system for clean environment certified by manufacturer smoke soot, noulds, moss and if effloFeScent salt and trading oil and greasy spot down and stopping etc. and applying two coats of cement based paint (First quality) applied using airless spray technology and capable of operating single spray gun with suitable hose length the spray machine should be reputed manufacture with pro-guard technology and capability of tracking pressure as well as paint and primer usage incl cleaning the floor , joinery, surfaces usage complete all as specified. Note : Work shall be executed through Company authorised OEM.
Wash basins, Vitreous China (Flat white type) size 550mmx400mm, crystal white with and including cutting for and pinning on ends of brackets, 450 mm long PVC connections 15mm size with PTMT coupling nuts at both ends, trap, grating and Union for discharge pipe, waste, chain and plug and porcelain stopper, waste pipe of polythylene of low or high density or PVC of 32mm dia including Pillar taps, 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, 32mm dia waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed, screwed for iron pipe and fixed, complete all as specified.
Stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure , screwed both ends for 15mm bore iron pipe or for unions fixed in repair complete all as specified. Note : Type of valve approved by the AGE (I).
Stop valves, cast copper alloy, , screwed down, high pressure , screwed both ends for 15mm bore iron pipe or for unions fixed in repair complete all as specified. Note : Type of valve approved by the AGE (I).
Angle valve valve, cast copper alloy, chromium plated, , screwed down, high pressure , screwed both ends for 15mm bore iron pipe or for unions fixed in repair complete all as specified. Note : Type of valve approved by the AGE (I).
Swivel shower of PTMT any colour for fixing with pipe 15mm size shower arm 15 mm size (.Minimum weight 40gms), including shower arm 15 mm size 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms) fixed in repair complete all as specified.
Bib tap, cast copper alloy ,chromium plated, fancy type , screwed for iron pipe or for brass ferrule of 15 mm bore complete, fixed in repair all as specified and directed.
Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed15 mm bore, fixed in repair, complete all as specified and directed.
Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.
600x450 mm bevelled edge mirror of slected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screwed and cup washers.
PVC connections 15 mm size with PTMT nuts of length 450mm fixed in repair complete all as specified and directed.
Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
Brass chromium plated tubular towel rail 20 mm dia, "D" type, 60 cms long between flanges fixed in repairs with and including chromium plated brass brackets, brass screws complete all as specified
PVC Waste pipe, 32mm dia suitable for wash hand basin, complete all as specified.
32mm size waste coupling of PTMT (half or full threaded) Minimum weight -45gms, fixed in repair, complete all as speciifed.
Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.
PVC valve less, crystal white, syphonic action type flushing cistern 10 litre capacity, superior quality, plunger type, low level, with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long and 15 mm dia 600 mm long PVC connection with CP brass coupling nuts and PVC washers at both ends fixed, fixed in repair , all as specified..
Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, crystal white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete 1:2:4, type B-I using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe etc,fixed in repair, all as specified.
Vitreous China wash down water closet (pedestal pattern), white including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC white seat cover , Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, PVC connection, fixed complete including demolition of old unservicable WC and provision of plain cement concrete M-15, type B-I, using 20mm graded crushed stone aggregate, fixed in repairs all as specified. Make: Cat Part No. 2008 for EWC, 2308 for seat cover, 2201/B for internal fittings of 'Cera' or equivalent makes mentioned in PS.
Sink with drainage board made of stainless steel, l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, fixed in repair complete all as specified and directed.
Sink made of stainless steel, l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, fixed in repair complete all as specified and directed.
PVC (SWR) floor trap, plain with grating including jointing with solvent cement for 75mm bore pipe, complete all as specified.
Galvanised steel tubing, 15mm dia, medium grade, with all fittings & fixtures complete, fixed to wall and ceiling or laid in floor/drain and testing on completion all as specified and directed.
All as per item no 111 above but exept pipe
Galvanised steel tubing, 20mm dia, medium grade, with all fittings & fixtures complete, fixed to wall and ceiling or laid in floor/drain and testing on completion all as specified and directed.
All as per item no 113 above but exept pipe
Rotational moulded polyethylene water storage tank 500 Ltrs capacity four layered (ISI Marked) cylinderical vertical with closed top, hoisted and fixed in position with ball brass valve, high pressure with PVC float valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line complete all as specified.
Rotational moulded polyethylene water storage tank 750 Ltrs capacity four layered (ISI Marked) cylinderical vertical with closed top, hoisted and fixed in position with ball brass valve, high pressure with PVC float valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line complete all as specified.
20 mm dia, ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in repair complete all as specified and directed. (Minimum weight 210gms)
110mm dia PVC(SWR) pipe single socketed with rubber ring joints, laid/fixed to tranches or in floor or walls, fixed in repair , complete all as specified and directed.
75mm dia PVC(SWR) pipe single socketed with rubber ring joints, laid/fixed to tranches or in floor or walls, fixed in repair , complete all as specified and directed.
110mm dia PVC(SWR) bend, any radius , provided with access door, complete all as specified and directed.
75mm dia PVC(SWR) bend, any radius , provided with access door, complete all as specified and directed.
110mm dia PVC(SWR) junction single, (Single T) equal or unequal , provided with access door, complete all as specified and directed.
75mm dia PVC(SWR) junction single, (Single T) equal or unequal , provided with access door, complete all as specified and directed.
Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 28 of tender doucments.
SAFFRON CONSTRUCTION CO. (BID ID -3078047)
Krithvik Electricals (BID ID -3072810)
vivek and co (BID ID -3073383)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .