Cost of maintenance of staff quarters (RCC Roof -AFD-29) at Achencovil Range during 2023-24.

Amount

MAINTENANCE OF BUILDING-AFD-29

2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

4.1.10 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

50.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.4.2 : 12 mm cement plaster of mix:1:6 ( 1 cement : 6 coarse sand)

od324342/2022_2023 : Dismantling the Existing Damaged Wooden Doors Frames and Shutters in Brickwall,Cleaning and Clearing the surface, including stacking within 50 metres lead:<br>Of area 3 sq. metes and below

od327345/2022_2023 : Dismantling the Existing Damaged Wooden Windows Frames and Shutters in Brickwall,Cleaning and Clearing the surface, including stacking within 50 metres lead:<br>Of area 3 sq. metes and below

50.9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood

od324343/2022_2023 : <br>Fixing Wooden Door Frame (chowkhats) in existing opening including embedding chowkhats in floors or walls cutting masonry for hold fasts,making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground within 50 meters lead:<br>Door Frame-as Per DSor 14.2.1 

od324344/2022_2023 : Providing and fixing Jack / Mahagony wood paneled shutters for doors, 30-35 mm thick shutters including M.S. pressed butt hinges bright finished of required size with necessary screws, after Removing the Existing Wooden Shutters in the Wooden Door Frame excluding panelling which will be paid for separately, all complete as per direction of Engineerin-charge.<br>using Anjili/ Jack wood-as Per DSoR 50.9.2.1

od324346/2022_2023 : Providing and fixing paneling in paneled shutters for doors, windows and clerestory windows (Area of opening for panel excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Jack/ Mahagony wood-as Per DSoR 50.9.4.1

od327945/2022_2023 : Providing and fixing glazed shutters for windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Mahagony / jack wood 25-30 mm thick shutters

14.29 : Providing and fixing M.S. round or squre bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows.

14.1.2 : Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:Cement mortar 1:4 ( 1 cement: 4 coarse sand)

od327876/2022_2023 : Providing and Fixing Good Quality Smokeless Oven of Standard size available in local market including cost of all fittings and Fixing charges etc complete

50.9.15.1 : Supplying and fixing 200 mm Aluminium aldrop

50.9.15.5 : Providing and fixing iron hooks and eyes: 100 mm

od324347/2022_2023 : Suppling and Fixing Link Lock 65MM Double Locking Technology 8 Levers with 3 Keys Stainless Steel available in Local Market

9.63.3 : Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete:150x10 mm

9.66.1 : Providing and fixing ISI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete:125 mm

50.14.1.1 : Removing and refixing door shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge.

50.14.1.2 : Removing and refixing window shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge

od324350/2022_2023 : Engaging Coolie for Cleaning the Wooden Common Rafter,under side of Asbestos Sheet, including all charges etc complete

PLUMBING WORKS AND SANITARY FITTINGS FOR TOILETS

od324334/2022_2023 : Providing PVC door of consisting factory made PVC door frame made of PVC extruded sections of having size 48 mm x 40 mm (or nearest size), with wall thickness 2.0 mm (± 0.2 mm), and 24 mm thick factory made Solid panel PVC door shutter and fixing shutter to the frame using 3 nos. stainless steel hinges etc .complete as per manufacturer’s specification and direction of Engineer- in-charge

od324335/2022_2023 : Dismantling and Hacking of Existing Cement Concrete Flooring including cleaning for surface etc. complete as per<br>direction of the Engineer-in-Charge.

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

od325205/2022_2023 : Providing and Fixing Ist quality Ceramic glazed floor tiles of size 600x600 mm of approved make, in all colours, shades, available in local market laid over existing cement mortar floor surface using good Quality Tile Adhesive including pointing the joints with white cement and matching pigments etc., complete.

11.37 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

8.31 : Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

od324475/2022_2023 : Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: as per DSOR 17.2.1<br>W.C. pan with ISI marked white solid plastic seat and lid

od326089/2022_2023 : Providing and fixing Stainless Steel kitchen sink available in local market with C.I. brackets including painting of fittings and brackets, cutting and making good the walls wherever required:<br>Kitchen sink without drain board<br>610x460 mm bowl depth 200 mm

od326103/2022_2023 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. pillar taps, 32 mm C.P. waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:<br>White Vitreous China Wash basin size 550x400 mm

18.58.2.1 : Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular lid150 mm nominal size square 100 mm diameter of the inner hinged round grating

50.17.1.3 : Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

od326062/2022_2023 : Providing and Fixing Rectangular shape 453x357 mm Mirror with Plastic moulded frame including cost of all Fittings and Labour Charges etc complete

od326018/2022_2023 : Providing and Fixing 15 mm Dia CP Long Body Tap

od324341/2022_2023 : Providing and fixing 110 mm PVC floor trap of approved quality.

50.18.9.22.12 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x75 mm dia Reducer

50.18.9.1.2 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 15 mm dia 10Kgf/cm2

50.18.9.2.2 : Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20 mm dia 10 Kgf/cm2

PAINTING WORKS

13.88 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

13.109.2 : Finishing walls with water proofing cement paint of required shade :Old work (one or more coats @ 2.20 kg/10 sqm) complete.

13.99.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

13.62.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

13.106 : Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade.

K.Sasidharan

Bidder Name

K.Sasidharan

RAJESH G