SPECIAL REPAIR TO CERTAIN ROADS IN CENTRAL SECTOR AT MIL STN KOTA

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exceeding 400 Sqm and depth exceeding 50 mm but not exceeding 100mm deep etc complete all as specified and directed.

Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) etc rolling with 8 to 12 tonne power roller etc. complete all as specified and directed

M&L for premix bituminous macadam mixed laid with mechanical paver and 8 to 12 tonne power roller and compacted to required gradient and camber (Consolidated thickness 75mm or less) with paving bitumen 4% binder (viscosity grade VG-30) contents complete all as specified and directed. NOTE:- (i) Work shall be executed as per designed mix (job mix formula) approved by GE. (ii) If the bitumen content as per design mix found to be less than 4%, it shall be recovered at the rate of Rs 60/- per Kg for short of bitumen. If bitumen content found to be more than 4% as per design mix same shall be provided without any extra cost to the Govt.

M&L for preparing black top surfaces of road by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc, applying priming/tack coat with bituminous primer (VG-10) viscosity grade @ 5 Kg per 10 Sqm etc including providing bituminous premix asphaltic semi dense concrete 30 mm thick (consolidated thickness) with mechanical paver, mixed at hot mix plant transported to site in tippers, chipping mixed with 5.5% of paving binder (VG-30) viscosity grade, rolled to uniform smooth surface with 8 to 12 tonne power roller and compacted to required camber and gradient complete all as specified and directed. NOTE:- (i) Work shall be executed as per job mix formula approved by Garrison Engineer (ii) Bitumen content as per design mix is found to be less than 5.5%, the short of bitumen shall be recovered at the rate of Rs 60/- per Kg and no adjustment shall be made if the bitumen content as per design mix found to be more than 5.5% same shall be provided without any extra cost to the Govt. complete all as specified and directed.

M&L for cleaning and preparing the road surfaces for road marking with reflective thermoplastic white road marking paint conforming to BIS 3262, laid through road marking machine in a layer painting lines, dashes, arrows, letters etc on roads, pavements and the like exceeding 10 cm wide with road marking paint, white or golden yellow of CRYSTALEX, using 5 Kg material per square meter by incorporating the white glass beads for reflectivity in 100 mm width.etc complete all as specified & directed.

S&F in repair delineator with two high performance 100mm Dia reflectors and two rectangular reflectors of 70mmx23mm are fixed on both sides of Guide Post. The body of Guide Post is moulded in ABS plastic and it is fixed on powder coated steel pipe of 1010 mm long embedded in PCC (1:2:4) type B-1 using 20mm graded stone aggregate (Size of block 30cmx 30cmx30cm) complete all as specified and directed. Make: Cat Part Model NO DA-74 of dark eye or equivalent in M/s Texla Plastic & Metals Pvt Ltd, M/s Anand sales India, M/s Automat Road safety Pvt Ltd as approved by GE.

S&F in replacement ABS Plastic Stud (Cat Eyes) dynamically designed having height impact strength and fitted with 2 Nos high reflective reflectors on both sides including fixing arrangement as per manufacturer’s instructions and as directed. Make: Cat Part No. - Art AME-1019 of make M/s Automat Road safety Pvt Ltd or equivalent make of M/s MB Engineering corporation / DARK EYE, M/s Texla Plastic & Metals Pvt Ltd as approved by GE.

S&F in replacement solar cat eyes (studs) made of aluminium di-casted body, 100% waterproof, both side reflectors, designed according to IP 65 of size 125mm x 125mm x 25mm with shank not less than 60mm length, high efficiency mono crystalline solar panel (2.5 V/0.3 watt), one Ni-Mh or Ni-cd rechargeable battery (1.2 V/1600 MA) having si80x super bright LEDs with 10000 to 18000 mcd (millicandela) view distance upto 1000 metre and flush road bearing capacity 10 MT, fixing in road by drilling a hole and with epoxy hardener etc as per manufacturer’s instructions at the location etc complete all as specified and directed. Model:- “DHRUV in dark eye or equivalent make of M/s Automat Road safety Pvt Ltd, M/s MB Engineering corporation, M/s Texla Plastic & Metals Pvt Ltd, M/s TATA Solar BP, approved by GE.

S&F in repair, black and yellow Plastic speed breaker including nuts and bolts etc. complete all as specified and directed. Make: Model no ALC-PSB1 of Asian LOTO or equivalent in Dark eye/TATA BP/Gogia Plastic/Red Safe/Froniter/Tata VPI as approved by GE

Schedule of Credit

S AND A ENGINEERS CONSTRUCTION CO

M/S SUNNY ASSOCIATE

Gupta Automobiles