Construction of Additional Block in Community Health Centre Building at Nagrota Surian

Amount

Excavation in foundation trenches etcetera in earth work in all type of classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and work doing in saturated soil, including chiseling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil, including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depth or any quantum of water including slush which may arise during de-watering, removal of slush and stacking the excavated soil clear from the edge of excavation within all leads, as directed by Engineer-in- charge and then returning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths and sides of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer-in-Charge, within all leads and lifts, disposed earth to be levelled and neatly dressed including carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Excavation in drains and channels etc. in earth work in all kinds of classification of soil such as pick work, jumper work, blasting work, pick jumper blasting work, hard blasting work including chiseling or wedging out rocks where blasting is prohibited and doing work in saturated soil including cost of shoring, strutting and pumping or bailing out water (surface and sub soil water) upto any depth and any quantum of water including clearing of slush which may arise during dewatering including dressing of sides and bed and disposing of all excavated earth upto any leads and lifts, disposed earth to be levelled and neatly dressed as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, toll tax, sale tax, malkana and all other taxes as imposed by the Government.

Filling in plinth with sand under floors including watering , ramming, consolidating and dressing complete as per HPPWD specifications or as directed by Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, Toll tax sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring in all height below supporting floor to ceiling upto any height and removal of the same for in-situ- reinforced concrete and plain concrete work in: Foundation footings, basis of columns etcetera and mass concrete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, GST malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies for all height/ depth height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ- reinforced concrete and plain concrete work in: Flat surfaces such as soffits of suspended floors, roofs landings, shelves and the like floor etcetera upto any thickness upto all floor level including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies for all height/ depth, height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ- reinforced concrete and plain concrete work in: Beams, cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, girders, bressumers upto any height/ depth/ thickness upto all floor level including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies for all height/ depth, height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ- reinforced concrete and plain concrete work in: Columns, Pillars, posts and struts, (squaree rectangular or polygonal in plan) in any height/ thickness/ depth upto all floor level, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies for all height/ depth height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ- reinforced concrete and plain concrete work in: Stair cases with sloping or stepped soffits excluding landings upto all floor level including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies for all height/ depth height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ- reinforced concrete and plain concrete work in: Edges of slab and break in floors and walls upto any width, upto all floor level, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (One cement : four sand : eight graded/ crushed stone aggregate 40mm (Forty milimetre) nominal size) and curing complete excluding the cost of form work in foundation and plinth/ depressed floor in all depth, including carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Stone filling tightly hand packed with hard stone of approved quality under floor including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (Twenty newten per square mill metre ) with cement contents not less than 330 kg (Three hundred thirty kilogram) and curing complete, excluding the cost of form work and reinforcement for reinforced concrete work in Foundation, footing, bases of columns and the like and mass concrete including pumping or bailing out water and removal of slush if any and carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete of grade M-20(M-twenty) design mix to obtain he minimum compressive strength of 20 N/mm² (Twenty newten per square mill metre ) with cement contents not less than 320 kg (Three hundred twenty kilogram) including curing complete as per H.P.P.W.D. specification or as directed by Engineer-in-Charge, excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girders, bressumers and cantilevers in all depth/thickness upto all floor level, including carriage of material within all leads, lifts and other incidentals. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (Twenty newten per square mill metre ) with cement contents not less than 320 kg (Three hundred twenty kilogram) and curing complete excluding the cost of form work in columns, pillars posts and struts in all depth / height includng pumping or bailing out water if any including carriage of material within all leads , lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (Twenty newten per square milimetre ) with cement contents not less than 320 kg (Three hundred twenty kilogram) including curing complete as per H.P.P.W.D. specification or as directed by Engineer-in-Charge, excluding the cost of form work and reinforcement for reinforced concrete work in stairs cases (except sprial stair case) in all depth/thickness upto all floor level, including carriage of material within all leads, lifts and other incidentals. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (Twenty newten per square milimetre ) with cement contents not less than 320 kg (Three hundred twenty kilogram) and curing complete, including the cost of form work but exluding the cost of reinforcement for reinforced concrete work in concrete Chajjas for all thickness, for all floor levels including finishing the exposed surface with cement mortar 1:3 (one cement : three sand) and carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (Twenty newten per square milimetre ) with cement contents not less than 320 kg (Three hundred twenty kilogram) including curing complete as per H.P.P.W.D. specification or as directed by Engineer-in-Charge, including the cost of form work but exluding the cost of reinforcement for reinforced concrete work in moulding as in cornices, windows sills etcetera not exceeding 15cm (fifteen centimetre) in girth, in all depth/thickness upto all floor level, including carriage of material within all leads, lifts and other incidentals. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Applying cement slurry on reinforced cement concrete slab or cement concrete work using 2.75 kg (two point seven five kilogram) of cement per squaree metre of floor area before laying cement concrete flooring including roughening cleaning of the concrete surface complete including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Squareed rubble masonry coursed with hard stones of approved quality in foundation and plinth upto all height/ depth including pumping or bailing out water/dewatering and including racking out joints with cement mortor 1:6 (One cement : six sand) and curing complete, including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Random rubble masonry coursed with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement : six sand : twelve graded crushed/ broken stone aggregate 20mm (Twenty milimetre) nominal size) at plinth level in cement mortar 1:6 (One cement : six sand) and curing complete, including carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying tor steel reinforcement for reinforced of Tata/sail cement concrete work including bending, binding and placing in position complete in all height including cost of binding wires complete and other incidentals including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying damp proof course 100mm (one handred milimetre) thick with cement concrete 1:2:4 (One cement : two sand : four graded stone aggregate 12.5mm (Twelve point five milimetre) nominal size) and curing complete as per HP:PWD. Specifications or as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Applying a coat of hot bitumen (mexphalt 80/100 (Eighty/ one hundred) equivalent) using 1.70 kg (One point seven zero kilogram) per squaree Metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil complete as per HP:PWD. Specifications or as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Half brick work using second class common burnt clay building bricks in super structure above plinth level to all floor level in cement mortar 1:4 (One cement : four sand) with hoop iron as per H.P.P.W.D. specification or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Brick work using second class common burnt clay building bricks in super structure above plinth level to all height/ floor level in cement mortar 1:6 (One cement : six sand) and curing complete, including carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Second class brick work using common burnt clay building bricks in super structure above plinth level upto all height/ floor level in cement mortar 1:4 (One cement : four sand) and curing complete, including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Supplying and filling broken/crushed stone/ brick bats/ aggregate/chipping of hard stone of 40mm (forty milimetre) nominal size, as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing anodized aluminum work for door, windows, ventilators and partitions frames with extruded built up standard tubular and other sections of approved make confirming to IS 733 and IS 1285 anodized transparent or dyed to required shade according to IS 1868 (minimum anodic coating of grade AC- 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fast including necessary filling up of gaps at junction, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleats angle, aluminum, snap beading for glazing/paneling C.P. brass/stainless steel screws. All complete as per Architectural drawings design and specifications and the directions of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, malkana, GST and all other taxes as imposed by the Government.

Providing and fixing anodized aluminum work for shutter of door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make confirming to IS 733 and IS 1285 anodized transparent or dyed to required shade according to IS 1868 (minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junction, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleats angle, aluminum, snap beading for glazing/paneling C.P. brass/stainless steel screws. All complete as per Architectural drawings, design, specifications and the directions of Engineer-in-Charge including providing and fixing hinges/ pivots and making provision for fixing of fittings where ever reqired including the cost of PVC/neoprene gaskets as required (fittings and glazing/penelling shall be paid for separately), including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, malkana, GST and all other taxes as imposed by the Government.

Providing and fixing fly proof stainless steel wire mesh in existing Aluminum shutters, as per drawing and technical speifications as directed by the Engineer-in-Charge, including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 8mm (eight milimetre) thick aluminium grill anodized powder coated pattern to existing windows/ventilators with 80mmx80mm (eighty milimetre into eighty milimetre) panels holes with 25x8mm (Twenty five into eight milimetre) aluminium flat in windows and ventilators including fixing with aluminum screws or bolts and nuts complete in aluminum channels base frames as per approved drawing design and specifications (Aluminum channels base frames to be measured and paid for separately), including carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 12mm (twelve milimetre) thick Both sides prelaminated water proof MDF Board of Greenlam/Kit ply exterior/ interior grade ISI marked and approved shade as per specification, approved drawing, design etcetera complete, including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 12mm (twelve milimetre) thick phenol bonded prelaminated Board (Both side) water proof Matt finish ISI marked IS No.12823 of Kitvista/Greenlam of approved shade for in infill panel of panalled shutters including bright finished/ black enamelled iron butt hinges with necessary screws, as per specification, approved drawing, design etcetera complete, including carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing glazing with glass panes of 6mm (six milimetres) thickness of Modiguard for shutters (weight not less than 13.75kg/sqm ((thirteen point seventy five kilogrammes per squaree metre) as per approved drawing design and specification, including carriage of materialwithin all leads , lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing glazing with glass panes of 5mm (five milimetre) thick plain glass weight not less than 10kg (ten kilogram) of Modiguard for shutters with putty and nails complete as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing glazing with frosted glass panes 4mm (four milimetre) thick of modiguard/sant/gobin for shutters with necessary screws and nails complete, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 12mm (twelve milimetres) thick pheonol bonded (one side) preliminated partical Board and inside of the shutter shall be finished with aluminum sheet for SDB shutters including fixing with nockel plated piano hinges with necessary screws etcetera complete, as per approved drawing design and specifications as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing steel wire gauge shutters Z-section using IRC fabric Jali having size 25mmx25mm (Twenty five milimetre into twenty five milimetre) square for dormar windows as per drawing and specifications and design or as directed by Engineer-in-Charge including carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 19mm (ninteen milimetre) thick water proof termite resistant commercial board for shelves, Board and shutters with 6mm (Six milimetre) hard wood edging and to be finished with mica lamination of approved shade and fixing with nickel plated bright finished piano hinges with necessary screws etcetera complete,as per approved drawing design and specification and further as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Cup Board shutter magnic catcher with necessary screws etcetera complete, as per approved drawing design and specification and as per the directions of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 65x35mm (sixty five into thirty five milimetres) special quality bright finished brass cup board locks or ward robe locks with six levers including necessary screws etcetera complete (Indan make of approved quality) as per approved drawing design and specification and futher as per the directions of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing C.P brass curtain rail with rollers stop ends and brackets in pelmets with curtain rod 25mm (twenty five milimetres) dia and brackets complete, as per approved drawing design and specification and futher as per the directions of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 300x16mm (Three hundred into sixteen milimetre) anodized aluminum sliding door bolts anodized Transparent or dyed to required colour and shade with bolts and nuts necessary screws etc. complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 250x10mm (two hundred fifty into ten milimetre) size anodized aluminum Tower bolts(Barrel type) anodized transparent or dyed to required colour and shade with bolts and nuts necessary screws etc. complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 150x10mm (One hundred fifty into ten milimetre) size anodized aluminum Tower bolts(Barrel type) anodized transparent or dyed to required colour and shade with bolts and nuts necessary screws etc. complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 125mm (One hundred twenty five milimetre) aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 100mm (One hundred milimetre) aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Aluminum oxidized PILOT/ sheel or equivalent oxidized 250mm (Two hundred fifty milimetre) size hooks and eyes complete in all respect, as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Aluminum oxidized Hydraulical door closer complete, as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 100mm (One hundred milimetre) bright finished brass floor door stopper with rubber cushion and necessary screws etcetera to suit shutter thickness complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying mirrar bolished Kota stone slab 25mm (Twanty five milimetre) thick of size 55x55cm (fifty five into fifty five centimeter) with 7.5cm (Seven point five centimeter) wide Jaisalmer yellow band in flooring laid on 20mm (twenty milimetre) average thick base of cement mortar 1:4 (One cement : four sand) and jointing with grey cement slurry mixed with pigment to match the shade of slab kota stone including rubbing nosing moulding and polishing complete upto all floor levels as per approved drawing design and specification , including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying 300x600mm (three hundred into six hundred milimetre) ceremic tiles in dado of Johnson/Nitco/Orient Bell upto110cm (one hundred ten centimetre) heght with 5cm (five centimetre) marble band patti above of approved shade laid on a bed of 12mm (twelve milimetre) thick cement mortar (1:3) (one cement : three sand) finished with flush pointing in white cement as per approved drawing, design and specifications, complete upto all floor levels, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying 600x600x10mm (Six hundred into six hundred into ten milimetre) vetrified tiles of Nitco/ Orient- Bell with coving (NTC/Johnson) of approved shade and design in flooring treads of steps and landing laid on a bed of 12mm (twelve milimetres) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per approved drawing, design and specifications, complete upto all floor levels, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying 600x600mm (Six hundred into six hundred milimetre) seamless static pulse Vinly tiles flooring 2mm (two milimetre) thick of approved shade of L.G. Hausys with coving of same shade in cement mortar 1:3 ( one cement : three sand) as per approved drawing, design and specifications, complete upto all floor levels, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying 300x300mm (three hundred into three hundred milimetre) ceremic tiles of Grade-IV of Johnson/Nitco Bell with coving of (NTC/Johnson) (as per approved shade in flooring) in cement mortar 1:3 ( one cement : three sand) complete as per approved drawing, design and specifications, upto all floor levels, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying Kota stone 55x55cm (fifty five into fifty five centimetre) of uniform colour as per approved shade laid on 20mm (twenty milimetre) thick base in cement mortar 1:4 (one cement : four sand) mix with pigment to match the shade of Kota stone including rubbing nosing moulding and miror polishing complete as per approved drawing, design and specifications, upto all floor levels, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying 300x450mm (three hundred into four hundred fifty milimetre) white glazed tiles in Dado /skiring of Johnson/Nitco/Orient-Bell 6mm (six milimetre) thick laid on a bed of 12mm thick in cement mortar 1:3 (one cement : three sand) finished with flush pointing in white cement as per approved drawing, design and specifications, upto all floor levels, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying 19mm (ninteen milimetre) thick 60x60cm (sixty into sixty centimetre) Red Mandana stone in flooring of ramp and laid over 20mm (twenty milimetre) average thick base of cement mortar 1:4 (one cement : four sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the stone including rubbing nosing moulding and poilsh finish complete. The stone shall be finished with rough polish to keep it non slippery and shall have wall mounted hand rail (DW-I-I) of KICH as per approved drawing, design and specifications, upto all floor levels, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying 19mm (ninteen milimetre) thick single slab Kota Stone in treads and riser of steps with semi/ round nosing laid over 20mm (Twenty milimetre) (average) thickness base of cement mortar 1:3 (one cement : three sand) and jointed with grey cement slurry mixed with pigment to match the shade of kota stone including rubbing and polishing complete as per Architectural drawing, design and specifications, upto all floor levels, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying 19mm (ninteen milimetre) thick Mirror polished marble in work top/ under counter wash basin and water through with semi round nosing laid over 20mm (Twenty milimetres) (average) thickness base of cement mortar 1:3 (one cement : three sand) and jointed with grey cement slurry mixed with pigment to match the shade of marble including rubbing and polishing complete as per Architectural drawing, design and specifications, upto all floor levels, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

40mm (Forty millimetre) thick cement concrete flooring 1:2:4 (One cement : two sand : four graded/ crushed stone aggregate 20mm (Twenty millimetre) nominal size) mechanically mixed laid in one layer and finished with a floating coat of neat cement and curing complete upto all floor level including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, GST, malkana and all other taxes as imposed by the Government.

Providing and fixing hard wood hand rail size 75x65mm (seventy five into sixty five milimetre) with M.S. (mild steel) flat 40x6mm (forty into six milimetre) welded with solid square bar having size 19x19mm (Ninteen into ninteen milimetre) and 12x12mm (twelve into twelve milimetre) in combination @ 80cm (eighty centimtere) centre to centre baluster etcetera including welding , grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary nuts and bolts complete, including fixing the railing with necessary accessories and dash fasteners bolts etcetera, of required size, on the top of the floor or the side of waist slab with suitable arrangement of hand rail as per the direction of Engineer-in-Charge, and as per approved drawing design and specifications, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, GST, malkana and all other taxes as imposed by the Government.

Providing and fixing 40mm (forty milimetres) diametre D-section M.S. (mild steel) hollow pipe ready made parapet railing upto 90cm (Ninety centimetre) height or as per architect drawing, design welded with 19mmx19mm and 12mmx12mm ( nineteen milimetre into nineteen milimetre and twelve milimetre into twelve milimetre) M.S. (Mild steel) solid squaree bars in combination with M.S. (mild steel) flat 40x6mm (forty into six milimetre) and embeded in cement concrete at the rate of 60cm (sixty centimetre) centre to centre over reinforcement cement concrete coping and jointing with electrical Gas welding at top complete as per approved drawing design and specifications, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, GST, malkana and all other taxes as imposed by the Government.

Providing and fixing 50mm (fifty milimetre) dia M.S. (mild steel) hollow pipehand rail slip resistant in ramp 90cm (ninety centimetre) height welded with 25mm (Twenty five milimetre) diameter hollow pipe balusters embedded in cement concrete 60cm (sixty centimetre) centre to centre and jointed with electrical Gas welding at top alongwith hand rail of hollow M.S. (Mild steel) pipe of 50mm (fifty milimetres) diameter and with 2 Nos. (two numbers) M.S. (Mild steel) flat of 50x5mm (Fifty into five milimetre). It should extend 30cm (thirty centimetre) beyond top and bottam of the ramp, as per approved drawing, design and specifications, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, GST, malkana and all other taxes as imposed by the Government.

Providing and fixing 50mm (fifty milimetre) dia Stainless steel wall mounted handrail (DW 1-1) of KICH in internal ramp as per approved drawing, design and specifications, including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, GST, malkana and all other taxes as imposed by the Government.

Providing and fixing ridges or hips 60 cm (sixty centimetre) overall having proper gola shape with 0.60mm (zero point six zero milimetre) thick ISI marked Z-120 prepainted steel sheet of Tata/Sail/Reliance/Jindal steel in roofing with hot dipped metallic Zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating plus back coat of polyster of5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six milimetres) diameter with prepainted galvanized iron limpet and bitumen washers filled with required shade of colour and laid complete within all accessories as required upto any height as per approved drawing design and specification and futher as per the directions of the Engineer-in-Charge, including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Valley 90cm (Ninety centimetre) overall with 0.90mm (zero point nine zero milimetre) thick ISI marked Z-120 (Z-one hundred twenty) prepainted steel sheet of Tata/Sail/Reliance/Jindal steel in roofing with hot dipped, metallic zinc coated steel sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted galvanized iron J or L hooks, bolts and nuts 6mm (six milimetres) diameter with prepainted galvanized iron limpet and bitumen washers filled with required shade of colour and laid complete within all accessories as required upto any height as per approved drawing, design and specification and futher as per the directions of the Engineer-in-Charge, including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 0.60mm (zero decimal six zero milimeter) thick prepainted steel sheet Tata shalc/Jindal steel/ Reliiance/ SAILI in roofing wih hot dipped matalic zinc coated sheet with tap coat of regular modified poly steel (RMP) organic coating of 20 (Twenty) micron over 5 (five) microns primer coating to back coat of polyster of 10 (ten) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks bolts and nuts 6mm (six milimetre) diameter with prepainted limpet and rubber washers complete with all accessories as required including carriage of material within all leads, lifts and other incidentals and further as per specifications approved drawing design and as directed by the Engineer-in-Charge. The rate including, octroi royality malkana sale tax, toll tax, GST or any other taxes as imposed by the Government.

Providing and fixing 0.63mm (Zero point six three milimetre) thick plain galvanised iron sheet 30cm (thirty centimeters) wide 30cm (thirty centimetres) deep plain G.I. (Galvanised iron) sheet gutter having done shape gratting of M.S. flat 5x5/6mm (five into five obleque six milimetre) 6mm (six milimeter) dia bush finished with iron brackets 40x3mm (Forty into three milimetre) size bolts and nuts and washers etcetera including making necessary connections with rain water pipe complete as per design and drawing and specification, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing M,S.(mild steel) BP (Back plain) sheet 2mm ( two milimetre) thick in eaves board/facia/soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per approved design, drawing and specification, as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured and paid separately), including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing flashing 38cm (thirty eight centimetre) overall with 0.60mm (zero point six zero milimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (twenty microns over 5 (five) microns primer coating plus back coat of polyster of 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six milimetre) diameter and prepainted G.I.(galvinsed iron) limpet and bitumen washers complete as per approved drawing, design and specifications, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing on wall face150mm (One hundred fifty milimetres) diameter P.V.C. (D-Plast) rain water pipes of working pressure not less than 4.50 kg (Four point five zero kilogrammes) per squaree centimetre of finolex/ Relpipe(Reliance)/Vectus including filling the joints with approved adhesive and carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, malkana, GST and all other taxes as imposed by the Government.

Providing and fixing PVC plain bend 150mm (One hundred fifty milimetres) diameter on wall face PVC (D-plast) accessories of finolex/ Relpipe(Reliance)/Vectus for rain water pipes including filling the joints with approved adhesive complete, as per design and drawing and specification, including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Shoe 150mm (One hundred fifty milimetres) diameter on wall face PVC (D-plast) of accessories finolex/ Relpipe (Reliance)/Vectus for rain water pipes including filling the joints with approved adhesive complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing PVC clamps of approved design to PVC rain water pipe including cost of cutting holes and making good the wall etcetera as per approved drawing, design and specifications complete, including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing aluminum composit panel ceiling 600x600mm (six hundred into six hundred millimetre) including prepainted G.I. (Galvanised iron) channel framing at the rate of 600mm (six hundred milimetres) centre to centre complete as per approved drawing, design and specifications complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Steel work of TATA/SAIL welded in built up sections, trusses and framed work composed of beams joists, channels, angles, tees, flats and connecting plates of angle cleats etcetera as in trusses and trussed purlins, main and cross beams, hip and jack rafters purlins connected to common rafters and the like in building including cutting fixing, lifting hoisting and placing in position complete and applying a priming coat of red lead paint complete as per HP:PWD. Specifications or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Painting two or more coats (excluding priming coat) on new steel and other metal surface under coat with enamel paint of Asian/Nerolac brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter and as per approved drawing and specification, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and scaured with wire brushes fine steel wire screws complete brushing including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting with ready mixed paint brushing wood primer pink, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Painting two or more coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete with enamel paint other than white and carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

6mm (Six millimetrs) thick cement plaster to ceiling with cement mortar 1:3 (One cement : three sand) for all floors level and curing complete including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster with cement mortar 1:6 (One cement : six sand) in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level, including arrises internal rounded angles, chamfers and/or rounded angle in all girth and finished even and smooth complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster with cement mortar 1:6 (One cement : six sand) in single coat on fair side of brick/ concrete/ stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster with cement mortar 1:5 (One cement : five sand) in single coat on fair side of brick/ concrete/ stone walls for exterior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

20mm (Twenty milimetres) cement plaster in single coat backing coat 10mm (ten milimetres) and finishing coat 10mm (Ten milimetres) thick on fair side of brick/stone masonry walls for interior plastering upto floor all level including amacss internal rounded angle chamfers or rounded angle in cement mortar 1:4 (one cement : four sand) as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

12mm (Twelve milimetres) thick 10cm (ten centimetres) wide plain cement mortar raised band in cement mortar 1:4 (one cement : four sand) all round the windows as per Architectural drawing, design and specifications and as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Unistone 12mm (twelve milimetre) clading on reinforced cement concrete surface side as on faces of Arch masonry walls etcetera on 12mm (twelve milimetre) thick cement plaster 1:3 (one cement : three sand) and jointed with cement slurry including scaffolding etcetera complette as per Architctural drawing, design and specifications and as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Applying Birla white wall care putty over plastered surface after thoroughly brushing the surface free from mortar droppings, dirt, dust, loose materialand other foreign matters and sand papered smooth to give final matter finish to the surface complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Finishing walls with Apex Weather proof Exterior grade emulsion of Asian paints/Berger paint/ Nerolac SURAKSHA paint of approved brand and manufacture as specified on un decorated wall surfaces (two or more coats) to give an even shade after thoroughly cleaning the surface to remove all dirt, dust and other foreign matters sand papered smooth, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Distempering (two coats) with synthetic acrylic distemper of Asian/ Nerolac paint of approved brand and manufacture and of required shade on ceiling/ slopping roof surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth, priming coat with distemper primer, including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Distempering (two coats) with oil bound washable distemper of Nerolac/Asian paint approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth, priming coat with distemper primer, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Painting (two coats) with Epoxy Resin proctective coating upto ceiling height and in ceiling of major O.T. unit of approved brand and manufacture and of required shade on walls and ceiling surfaces to give an even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth as per approved drawing, design and specifications, including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Painting (two coats) with synthetic enamel paint of Asin/Nerolac paints (upto Dado height) of approved brand and manufacture and of required shade on wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth including priming coat with distemper primer, as per approved drawing, design and specifications, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Taking out doors, windows and clerestorey windows shutter (steel or wood) not exceeding three squaree metre in area including stacking at a suitable place and as per approved drawing, design and specifications, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Wall painting (two or more coats) with acrylic washable emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/ stone/ plastered wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surface, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetres) dia M.S.(Mild steel) Hollow pipe post for porch as per Architectural drawing, design and specifications, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing M.S.(Mild steel) Screen for Dormors as per Architectural drawing, design and specifications, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing plinth protection with 60mm (sixty milimetre) thick interlocking paver blocks of NTC with 23cm (Twenty three centimetre) dia half round pipe for drainage purpose fixed over cement concrete 1:5:10 (one cement : five sand : ten graded bedding for pipe as per Architecural drawing, design and specifications, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Demolition of stone masonry above ground level upto all floor level including stacking the serviceable material as suitable place and disposal of un-serviceable material upto any lead including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying 60mm (sixty milimetre) thick heavy duty precast cement concrete inter locking paver blocks of NTC vibro completed upto M-50 (M-Fifty) grade including border or kurb block grey or coloured over sub-base of concrete with 25mm (twenty five milimetres) thick average thickness of cement mortar 1:4 (one cement : four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubing and polishing complete, with carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 600x600x15mm (six hundred into six hundred into fifteen milimetre) Everst Fibre cement board ceiling with prepainted G.I. (galvanised iron) channel framming at the rate of 600mm (six hundred milimetres) centre to centre complete as per approved drawing, design and specifications, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 50mm (fifty milimetre) dia SST (Stainless steel) pipe hand rail fixed with 35mm (thirty five milimetre) dia stainless steel baluster as per detail in combination of 35mm (thirty five milimetre) dia and 15/20mm (fifteen obleque twenty milimetre) SST pipe baluster knock down railing of KICH Hand rail shall be fixed on 10x50mm (ten into fifty milimetre) S.S. flat baluster placed at 1200mm (Twelve hundred milimetre) centre to centre alongwith 3 Nos. (three numbers) at the rate of 16mm (sixteen milimetre) mild rail connected at the side of the baluster with fixtures. The baluster would be fixed on the floor, with casted base plate minimum 6mm (six milimetre) thick base plate shall be concealed with suitable S.S. 316 grade cover cap Railing should be made of hollow tubes, channels, plates etcetera, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary accessories and stainless steel dash fastners, stainless steel bolts etcetera, of required size on the top of the floor or the side of waist slab with suitable arrangement as per direction of Engineer-in-Charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etcetera), as per approved drawing, design and specifications, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing polyethylene Aluminum polyethylene (PE-AL-PE) composite pressure pipesU.V. stabalized with carbon black and fitting of kitec confirming to IS 15450-2004 for water supply complete with necessary fittings including cutting fixing and making good the walls and floor complete, as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.1620 (20mm (Twenty milimetres) outer diameter).

Providing and fixing polyethylene Aluminum polyethylene (PE-AL-PE) composite pressure pipesU.V. stabalized with carbon black and fitting of kitec confirming to ISI 15450-2004 for water supply complete with necessary fittings including cutting fixing and making good the walls and floor complete, as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.2025 (25mm (Twenty five milimetre) outer diameter).

Making connections of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40mm (Twenty milimetres to forty milimetres) bore by providing and fixing tee including cutting and threading the pipes complete, and carriage of materialwithin all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes of Supreme Kit Finolex/Vectus/Relience including fixing with approved adhesive etcetera complete, including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

150mm (one hundred fifty milimetre) nominal diameter

Providing and fixing 150mm (One hundred fifty milimetres) (4.6mm) thick (four point six milimetre) thick nominal bore/diameter P.V.C. clamps of finolex/Vectus/ Relience fixing ISI marked including with steel screws and rawal plug etcetera complete including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetre) nominal bore/diameter P.V.C. clamps of Supreme shine/Finolex/Vectus/ Reliema fixing ISI marked including with steel screws and rawal plugs etcetera complete, including carriage of materialwithin all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetre) nominal bore/diameter P.V.C. Supreme/Kitec/ Finolex/ Reliema Astral Heal Rest Confirming to IS No.14735-99 including filling the joints with approved adhesive, including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetre) nominal bore/diameter P.V.C. Supreme/Kitec/Vectus/ Finolix Astral plain bend Confirming to IS No.14735-99 including filling the joints with approved adhesive, including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetres) nominal bore/diameter P.V.C. Supreme/Kitec/Vectus/ Finolix Astral plain bend Confirming to IS No.14735-99 including filling the joints with approved adhesive, including carriage of materialwithin all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetres) nominal bore/diameter ISI marked PVC Supreme/Kitec/Vectus/ Finolix Astral or its equivalent Collar complete upto all floor level as per HP:PWD. specifications and as directed by the Engineer-in-Charge, including fixing with approved adhesive complete, including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetres) nominal bore/diameter ISI marked PVC Supreme/Kitec/Vectus/ Finolix Astral or its equivalent Collar complete upto all floor level as per HP:PWD. specifications and as directed by the Engineer-in-Charge, including fixing with approved adhesive complete, including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ISI marked P.V.C. cowl, including fixing with approved adhesive and carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

150mm (one hundred fifty milimetre) nominal diameter

110mm (one hundred ten milimetres) nominal diameter

Providing and fixing ISI marked 110x90mm (one hundred ten into ninety milimetres) P.V.C. floor trap of self cleaning design complete including fixing with approved adhesive including cost of cutting and making good the walls and floors etcetera complete and carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetres) dia PVC pors trap for vitreous china wash down water closet squatting pan (Indian type W.C. pan) Orrissa patlern including fixing with approved adhsesive and carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, GST malkana and all other taxes as imposed by the Government.

Providing and fixing vitreous china wash down, water closet squatting pan (Indian type W.C. pan) Orissa pan No.20004 of size 580mmx400mm (five hundred eighty milimetre into four hundred milimetre) of Hindware/ Cera/ Jaquar of white shade (earth work, bed concrete, foot rest and trap to be measured and paid for separtely) as per Architectural drawing, design and specifications, including carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, GST malkana and all other taxes as imposed by the Government.

Providing and fixing Anglo Indian Vitreous china wash down water closet of size 81x50x80cm (eighty one into fifty into eighty centimetres) No.20011 (Europen type W.C. pan) of HIND WARE/ CERA MAKE with internal P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (One cement : One sand) (seat and cover to be measured and paid for separately), including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Anglo Indian Vitreous china wash down water closet of size 57x35x39cm (Fifty seven into thirty five into thirty nine centimetres) (Europen type W.C. pan) No.20012 of HIND WARE/ CERA MAKE with internal P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (One cement : One sand) (seat and cover to be measured and paid for separately), including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing to wall ceiling and floor high density PVC polyethylene/ poly propylene 10 litres (Ten litres) capacity (Dual flush) European standard control low level flushing cistern (Sleek plus) of Hindware/Cera/Jaquar of star white/ snow ehite shade with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm (Fifteen milimetres) nominal size PVC ball valve with polythene, float with push botton couplings for connections, with inlet, outlet and over flow pipe, 40mm (Forty milimetres) dia C.P. flush bend with cistern and closet (overflow pipe to be measured and paid for separtely) as per per Architectural drawing, design an specifications, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, GST malkana and all other taxes as imposed by the Government.

Providing and fixing G.I. (galvanised iron) inlet connection pipe for each flush pipe with W.C. pan, including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing solid type white plastic seat and cover for wash down water closet of Hindware /Cera with C.P. brass hinges and rubber buffers including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Vitreous china wash basin No.10001 of HIND WARE/CERA MAKE 550x400mmx830mm (five hundred fifty into four hundred into eight hundred thirty milimetre) without pedestal with single hole for pillar tap with cast iron or mild steel brackets painted white including cutting holes and making good the same but excluding the cost of fittings, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Vitreous china under counta wash basin Zen category 10049 and Tap shall be Elbroey/fort operated of HIND WARE/CERA MAKE 560x430mm (five hundred sixty into four hundred thirty milimetres) without pedestal with single hole for pillar tap with cast iron or mild steel brackets painted white including cutting holes and making good the same but excluding the cost of fittings, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Hind ware/ Cera make snow white shade vitreous china Urinal small flat back No.60001 of size 39x37.5x59cm (thirty nine into thirty seven point five into fifty nine centimetres) auto flush including connection the urinal with waste pipe by means of white lead mixed with chopped hamp (waste pipe to be measured and paid for separtely) as specified as per the directions of the Engineer-in-Charge upto all floor level, including carriage of material within all leads, lifts and other incidentals charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ISI marked stainless steel kitchen sink 610x510x200mm (six hundred ten into five hundred ten) with 200mm ( two hundred milimetres) drain board diamond model code No. WB-2116 with double hole for pillar tap with C.I. or mild steel brackets painted white including cutting holes and making good the same but excluding fittings complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 32mm (Thirty two milimetres) diameter rubber plug for sink or wash basin, including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ISI marked 45cm (Forty five centimetres) long and 15mm (Fifteen milimetres) nominal bore PVC connections pipe with brass unions, complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ISI marked Mixer for Kitchen sink with casted swinging spout at top complete as per direction of the Engineer-in-Charge, including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 32mm (Thirty two milimetres) diameter P.V.C. waste for wash basin or sink, including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing two hole basin mixing Faucet, including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 100mm (One hundred milimetre) dia chromium plated grating of superior quality for floor, gully or Nahni trap complete, including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetre) nominal bore/diameter (to level or slopes) PVC pipes grade 'A' of Supreme/Kitec and jointing with approved adhesive including testing of pipes and jointing complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 600mmx450mm (Six hundred millimetres into four hundred fifty millimetre) Bevelled edge mirror of superior glass mounted on 6mm (Six milimetre) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers, complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 600mmx20mm (Six hundred milimetres into twenty milimetre) C.P. brass towel rail of Jal/ESS ESS complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws, complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing chromium plated brass liquid soap container with C.P. brass lid and bracket fixed to wooden cleats with C.P. brass screws, complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing chromium plated brass toilet paper holder of approved brand and manufacture of Jal/ESS ESS complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing C.P. Jet spray make of Jal/ESS ESS with 1.5metre (One point five metre) tube complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing chromium plated brass bib tap 15mm (Fifteen millimetre) diameter with capstan head Jal/ESS ESS complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) diameter C.P. brass (Heavy duty I.S.I. marked No. 8931 and 8934) stop cock Jal/ESS ESS complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) diameter C.P. brass (Heavy duty I.S.I. marked No. 8931 and 8934) pillar tap with capstan head Jal/ESS ESS complete, including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (fifteen milimetre) diameter PTMT push cock tap complete, including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) C.P. brass angle valve of Jal/ESS ESS without nuts and pipes complete, including carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (Fifteen milimetre) nominal bore brass full way valve with wheel Jal/ESS ESS complete, including carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (Fifteen milimetre) nominal bore C.P. brass valve (Horizontal plunger) type High Pressure with polythene plastic floats of Jal/ESS ESS including carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetre) diameter P.V.C. single equal branch of Supreme/ kitec with oval acess door, insertion rubber washer 3mm (Three milimetre) thick bolts and nuts ISI marked including fixing with approved adhesive, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetre) diameter P.V.C. single equal branch of Supreme/Kitec with oval acess door, insertion rubber washer 3mm (Three milimetres) thick bolts and nuts ISI marked including fixing with approved adhesive, including carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetre) diameter P.V.C. double equal branch Supreme/Kitec with oval acess door, insertion rubber washer 3mm (Three milimetres) thick bolts and nuts ISI marked including fixing with approved adhesive, including carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetre) diameter P.V.C. double equal branch Supreme/Kitec with oval acess door, insertion rubber washer 3mm (Three milimetres) thick bolts and nuts ISI marked including fixing with approved adhesive, including carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetre) diameter P.V.C. plain bend of supreme/Kitec including fixing with approved adhesive, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetre) diameter P.V.C. plain bend of supreme/Kitec including fixing with approved adhesive, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetre) diameter PVC door bend with oval access door, instern rubber washer 3mm (three milimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetera, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetre) diameter PVC offset 45ᵒ (Forty five degree) ISI marked of Supreme/Kitec including fixing with approved adhesive etcetera, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetre) diameter PVC offset 45ᵒ (Forty five degree) ISI marked of Supreme/Kitec including fixing with approved adhesive etcetera, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and placing three layered PVC water storage tank (SINTEX of 1000 litres (One thousand litres) capacity complete in all respect with necessary fittings and mosquito proof coupling of approved design 15mm (Fifteen milimetres) nominal bore ball valve with polythene float overflow pipe, scour pipe and PVC cover with locking arrangement including providing pads of size as required including hoisting upto any height, and carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement : four sand : eight graded stone aggregate 40mm (Forty milimetre) nominal size) for the bedding for P.V.C. pipes of 150mm (one hundred fifty milimetre) diameter with necessary form work and curing complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying cement concrete 1:3:6 (One cement : three sand : six graded crushed stone aggregate 40mm (Forty millimete) nominal size) in haunching of PVC pipes of 150mm (One hundred fifty milimetre) internal diameters, including concrete for bedding necessary form work and curing complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing vitreous China pedestal of Hindware/Cera/Jaquar for wash basin complete recessed at the back for the reception of pipes and fittings, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 100mm (One hundred milimetre) dia sand cast iron grating of superior quality for floor, gully or Nahni trap complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 600x120mm (six hundred into one hundred twenty milimetre) glass self with C.P. brass brackets and guard rail complete fixed to wooden plugs with C.P. brass screws, complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Constructing mainhole with R.C.C. top slab in cement concrete 1:2:4 (One cement : two sand :four graded stone aggregate 20mm (Twenty milimetre) nominal size) mix foundation concrete 1:4:8 (One cement : four sand :eight graded crushed stone aggregate 40mm (Forty milimetre) nominal size inside plastering 15mm (Fifteen milimetre) thick with cement mortar 1:3 (One cement three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement : two sand : four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size) finished smooth complete including curing and testing (a) inside size 800x800x500mm (eight hundred into eight hundred into five hundred milimetre) and upto any depth and including C.I. cover with frame (light duty single seal pattern-1) 455x610mm (Four hundred fifty five into six hundred ten milimetre) internal diamension the total weight of cover and frame to be not less than 38kg (Thirty eight kilogram) (weight of cover 23kg (Twenty three kilogram) and weight of frame 15 kg (Fifteen kilogram) with 200mm (Two hundred milimetre) thick wall of brick masonry using second class common burnt clay building bricks in cement mortar 1:3 (one cement : three sand), including carriage of material within all leads and lifts, and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Constructing mainhole with R.C.C. top slab in cement concrete 1:2:4 (One cement : two sand :four graded stone aggregate 20mm (Twenty milimetre) nominal size) mix foundation concrete 1:4:8 (One cement : four sand :eight graded crushed stone aggregate 40mm (Forty milimetre) nominal size inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One cement three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement : two sand : four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size) finished smooth complete including curing and testing (a) inside size 800x800x1000mm (eight hundred into eight hundred into one thousand milimetre) and upto any depth and including C.I. cover with frame (light duty single seal pattern-1) 455x610mm (Four hundred fifty five into six hundred ten milimetre) internal diamension the total weight of cover and frame to be not less than 38kg (Thirty eight kilogram) (weight of cover 23kg (Twenty three kilogram) and weight of frame 15 kg (Fifteen kilogram) with 200mm (Two hundred milimetre) thick wall of brick masonry using second class common burnt clay building bricks in cement mortar 1:3 (one cement : three sand), including carriage of material within all leads and lifts, and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Constructing brick masonry chamber for under ground cast iron inspection chamber and bends with second class common burnt clay building, bricks in cement mortar 1:5 (One cement : five sand) cast iron cover with frame (light duty) 455mmx610mm (four hundred fifty five milimetre into six hundred ten milimetre) internal dimensions total weight of cover with frame to be not less than 38 kgs (Thirty eight kilogram) (weight of frame 15 kgs. (Fifteen kilogram) and weight of cover 23 kgs. (Twenty three kilogram) with reinforcement cement concrete top slab 1:2:4 (One cement : two sand : four graded stone aggregate 20mm (Twenty milimetre) nominal size) foundation concrete 1:5:10 (One cement : five sand : ten graded stone aggregate 40mm (Forty milimetre) nominal size) in side plastering 15mm (Fifteen milimetre) thick with cement mortar 1:3 (One cement : three sand) finished smooth with a floating coat of neat cement on walls and bed concrete etcetera complete. In side dimensions 455mmx610mmx450mm (Four hundred fifty five milimetre into six hundred ten milimetre into four hundred fifty milimetre) deep single pipe line complete as per the direction of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing composite end seal compression fittngs as per IS-15450-2004 for cold water supply e.g. tees, elbow, reducers, connectors, couplers and clamps etcetera of Kitee/supreme with jointing testing and fittings complete including cutting and making good the walls etcetera, including carriage of materialwithin all leads and lifts. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Equal tee (1620)

Equal tee (2025)

Female elbow (1620x15mm thread) (One thousand six hundred twenty into fifteen milimetre) thread

Female elbow (1620x20mm thread) (One thousand six hundred twenty into twenty milimetre) thread

Female elbow (2025x25mm thread) (Two thousand twenty five into twenty five milimetre) thread

Female branch tee (1620x1620x20mm thread ((One thousand six hundred twenty into one thousand six hundred twenty into twenty milimetres) thread

Female branch tee (1620x1620x25mm thread ((One thousand six hundred twenty into one thousand six hundred twenty into twenty five milimetres) thread

Male thread connector (1620x15mm thread (One thousand six hundred twenty into fifteen milimetres) thread

Male thread connector (2025x25mm thread (Two thousand twenty five into twenty five milimetres) thread

Reducing Tee 1620x all branches (One thousand six hundred twenty into all branches)

Reducing Tee 2025x all branches (two thousand twenty five into all branches)

Coupler 1620 (One thousand six hundred twenty)

Coupler 2025 (Two thousand twenty five)

Reducer 1620x1216 (One thousand six hundred twenty into one thousand two hundred sixteen)

Reducer 2025x1216 (Two thousand twenty five into one thousand two hundred sixteen)

Reducer 2025x1620 (Two thousand twenty five into one thousand six hundred twenty)

Providing and fixing composite end seal compression fittngs as per IS-15450-2004 for Hot water supply e.g. tees, elbow, reducers, connectors, couplers and clamps etcetera of Kitee/Kisan with jointing testing and fittings complete including cutting and making good the walls etcetera, including carriage of materialwithin all leads and lifts. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Equal tee 1620 (One thousand six hundred twenty)

Equal tee 2025 (Two thousand twenty five) )

Female elbow (1620x15mm thread) (One thousand six hundred twenty into fifteen milimetre) thread

Female elbow (1620x20mm thread) (One thousand six hundred twenty into twenty milimetre) thread

Female elbow 2025x25mm thread (Two thousand twenty five into twenty five milimetre) thread

Female branch tee (1620x1620x20mm thread ((One thousand six hundred twenty into one thousand six hundred twenty into twenty milimetre) thread

Female branch tee (2025x2025x25mm thread (Two thousand twenty five into two thousand twenty five into twenty five milimetre) thread

Male thread connector (1620x15mm thread (One thousand six hundred twenty into fifteen milimetre) thread

Male thread connector (2025x25mm thread (Two thousand twenty five into twenty five milimetre) thread

Reducing Tee 1620x all branches one thousand six hundred twenty into all branches)

Reducing Tee 2025x all branches (two thousand twenty five into all branches)

Coupler 1620 (One thousand six hundred twenty)

Coupler 2025 (Two thousand twenty five)

Reducer 1620x1216 (One thousand six hundred twenty into one thousand two hundred sixteen)

Reducer 2025x1216 (Two thousand twenty five into one thousand two hundred sixteen)

Reducer 2025x1620 (Two thousand twenty five into one thousand six hundred twenty)

Providing and fixing Hind ware/ cera make vitreous china Division plate for urinals of size 600x300mm (six hundred into three hundred milimetre) of white shade with necessary screws complete, as specified, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and Chromium plated 40mm (forty milimetre) dia steel pipe for grab bars at 78cm (seventy eight centimetres) height as per details at the position of the seat and wash basin complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Supplying and fixing cast iron cover with rectangle frame 445x610mm (four hundred forty five into six hundred ten milimetres) (light duty single scale pattern of the weight of cover to be not less than 23kg (Twenty three kilogrammes), as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing water pump 1.00 HP ((One Horse power) of Kirlaskar/ Cromption as per HP:PWD. specifications and as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying 20mm (twenty milimetres) diameter in trenches, galvanised mild steel tube, medium grade complete as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying 15mm (fifteen milimetres) diameter in trenches, galvanised mild steel tube, medium grade complete as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Kumar

Ujjawal Singh

suresh kumar gupta