ADDITION ALTERATION TO CERTAIN BUILDINGS AT LGS SECTION, SPECIAL REPAIR TO SHEDS (04 NOS) FOR ARRESTER BARRIER AT 29 11 ENDS OF RUNWAY AND PROVN OF INTERLOCKING TILES FLOORING NEAR BLDG NO. P-161 AT AF STATION BAREILLY

Amount

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.

M&L for 15 mm thick screed bed or bedding layer of cement mortar (1:4) for laying floor/ wall finishes complete all as specified and as directed.

M & L for vitrified ceramic tiles drak shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.48 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Taking down of cement plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surface etc complete all as specified and as directed.

S&F 5.5mm thick sheet glass, ordinary quality, frosted on one side, fixed with rubber washer, beads, glazing screws etc complete all as specified and as directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.

M&L for excavating in trenches (manually), n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil etc complete all as specified and as directed.

M&L for cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete etc complete all as specified and as directed.

S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and as directed.

S & F for mild steel TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and as directed.

Description all as per srl item No. 12.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter rough finished surface complete all as specified and as directed.

M&L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions (square, rectangular or polygonal) rough finished surface complete all as specified and as directed.

M&L for reinfoced cement concrete of design mix M-25 (using 20mm graded stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete all as specified and as directed.

M&L for reinfoced cement concrete of design mix M- 25 (using 20mm graded stone aggregates) as in columns, pillars, piers, posts and struts etc complete all as specified and as directed.

S&F framed work as in doors or gates of steel angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc complete all as specified and as directed.

S&F framed work as in SWT cover frame of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including taking down etc complete all as specified and as directed. (Fe-410-W grade E-250 quality A).

M&L for 10mm thick rendering on fair face of brick work /concrete surfaces in cement mortar (1:4) complete all as specified and as directed.

M&L for glazed coloured cremic tiles of size (300x450)mm x 7mm thick as in vertical surface, set and jointed in neat cement slurry and pointed in white or colour cement to match etc with and including10mm thick backing coat rendering on fair faces of brick work /concrete surfaces in cement mortar (1:4) complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed with cement mortar (1:4) etc complete all as specified and as directed.

S&F in repair wash down water closet vitreous china semi pedestal pattern (Anglo- Indian type) white (excluding fixing bolts, flushing cistern and flush pipe) with and including PVC (SWR) 'P' or 'S' trap including connecting to trap and flushing pipe, white seat cover, cast copper ally CP jet and making good to floor etc complete all as specified and as directed.

S&F in repairs vitreous china urinals, bowl type (half stall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

S&F in repair vitreous china squatting pan, 'Orissa’ pattern, size (580 x 440)mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S & F for rotational moulded polyethylene water storage tank 1000 Ltrs (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part-I with and including PTMT float valve, wash out GI pipe, GI overflow pipe, GI nipple etc and taking down of old unserviceable tank complete all as specified and as directed.

S&F in repair 10 Ltr PVC valveless, syphonic action type, low level flushing cistern, white, with inlet, ball valve, float and handle including brackets with and including PVC connection pipe etc complete all as specified and as directed.

Excavating manually over areas, n exc 1.5 m deep and getting out in soft/ loose soil complete all as specified and as directed.

Removing excavated material or spoils exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified and as directed.

Rolling and consolidating formation surfaces in cutting with 8 to 10 tonne power roller complete all as specified and as directed.

M&L for 200 mm thick hardcore of broken stone or boulders of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 10 cm thick each layer, watered and rolled/rammed with 8 to 12 ton power roller to a true surface to required gradient and camber as required complete all as specified and as directed.

M&L for 150 mm thick (compacted thickness) PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in sub base of road complete all as specified and as directed.

M&L for 150 mm thick (compacted thickness) with PCC M-25 (design mix) (using 20mm graded crushed stone aggregate) as in pavement of road complete all as specified and as directed.

M&L for spike rolling to surfaces or making impressions of expanded metal, whist the concrete is green complete all as specified and directed.

M&L for forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound grade 'A' for 250 mm thick concrete slab complete all as specified and as directed.

M&L for forming construction joint 310mm deep x 10mm wide by cutting with diamond cutter and filled with sealing compound Grade 'A' complete all as specified and as directed.

M&L for forming contraction (Dummy) joints 65mm x 10mm wide by cutting with diamond cutter and filled with sealing compound grade 'A' complete all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking off shutters from the frames) area exc. 1.5 sq. m & n. exc 4 sqm each complete all as specified and as directed.

S&F anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F for anodised powder coted aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, al handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 etc complete all as specified and as directed.

S&F for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for 15mm thick rendering with CM (1:4) on other than fair faces of brick wall or concrete surfaces, finished even and fair complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75mm thick cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in plinth protection and finished fair & even complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

M&L for 100mm thick cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in path etc, laid in alternate layer with necessary joints complete all as specified and as directed.

M&L for 100mm thick cement concrete (1:2:4) type B-2 (using 40mm graded stone aggregate) as in path etc, laid in alternate layer with necessary joints complete all as specified and as directed.

M&L for hardcore of broken stone and boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Removing excavated soil material n exc. 50m and depositing where directed at a level n exc. 1.5 m above starting point complete all as specified and as directed.

M & L for brick work with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

M&L for preparation of new or untreated surface of wall and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of zinc chrome primer complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for machine pressed precast conctete interlocking paver block with grey cement and no pigment, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed.

M&L plain cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregates) as in coping, parapets, bed plates, kerb and the like rounded or chamfered on edges complete all as specified and as directed.

M/S Quality Constructions

M/s M Aali construction co

Ikrar khan & co.

Zaigham Enterprises

M/S ARORA ENTERPRISES

M M CONSTRUCTIONS

M/s Agarwal Builders