NORTH PARAVOOR MUNCIPALITY 2022-23 REPAIR TO HIGHMAST LIGHT FITTED IN MUNICIPAL JN AND PERUMPADANNA JN

Amount

Electrical

OD35800/2022-2023:Disconnecting the power connection of the Highmast light and lowering the GI pipe bracket along the 6/9nos unserviceable LED outdoor lights , disconnecting and dismantling each of them with out further damage and hand over the same to the concerned authorities including conveyance.

2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

OD36580/2022-2023:Renewing the 25 A DP Contactor L&T make in required position giving connection etc

2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

OD118818/2022-2023:Supply and renewal Timer with new 32A L&T make 230 V Timer ( Analog Vertion J 648B) instead of difective one

90.15.4.10:Supply Conveyance, installation, testing and commissioning of 180W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

90.15.4.8:Supply Conveyance, installation, testing and commissioning of 120W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

OD35802/2022-2023: Charges for lifting the iron bracket along with 6/9nos out door LED fitting up to the top of the lamp post and place it in correct level and alignment including make it in good working condition and providing a guarantee for a period of one year.

2.3.2:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door

2.10.3:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

OD38979/2022-2023:Dismantling the existing SP/DP/TP/FP MCB/ISO from the existing MCBDB and refitting the same after cleaning and minor repairs, reconnection etc as required.

2.11:Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

1.27.1:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

90.10.3.15:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )32A DP switch with indicator

1.17.11:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 2.5 sq. mm

OD38983/2022-2023:Supply and providing 2 x10 Sqmm PVC &PVC WP Alu wire 1100V Gr clamped to the proposed guided wire, connection etc.

2.10.5:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole and neutral

2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

90.6.5.12:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 2.50 sq mm

OD118921/2022-2023:Re clamping the existing 4x6 sqmm UG cable using new GI clamps, Iron screws ,PVC grips reconnection etc as required.

AJITH

All Star Electricals

Bidder Name

AJITH

All Star Electricals

POWER ELECTRICALS