Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.8 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹9.3 L+₹1.4 L (18.5%)Rejected-AOC | L2 | Rejected-AOC HIGHEST QUOTED, HENCE REJECTED |
| Sl No | Description | Qty | Unit | Kadaladimattathu L2 | JOSE VARKEY L1 |
|---|---|---|---|---|---|
| 1.00Building maintenance | |||||
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 85 | kg | 217 ₹18,445 | 213.15 ₹18,117.75 Lowest |
| 1.00 | OD105071/2025-2026:Designing, fabricating, testing, installing and fixing in position Curtain wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear projections of the building, for all the heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it water tight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with kynar 500 based PVDF/ Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (service) on face # 2 as specified using stainless steel screws, nuts, bolts, washer, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS316, Nylon seperators to prevent bi-metallic contacts all complete required to perform as per specification and drawing . The item includes cost of all material & labour components, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminium Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. | 82.5 | sqm | 3,866.44 ₹3,18,981.3 | 3,796.52 ₹3,13,212.9 Lowest |
| 1.00 | OD105072/2025-2026:Providing and fixing projected 2D Acrylic Letter Signage on ACP cladding with best quality multiwood and acrylic sheet of approved brand and manufactured as directed by dept. | 825 | Cm ht per letter | 175 ₹1,44,375 | 17.15 ₹14,148.75 Lowest |
| 1.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 260 | kg | 550 ₹1,43,000 | 539.7 ₹1,40,322 Lowest |
| 1.00 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 33.73 | sqm | 1,203 ₹40,582 | 1,180.35 ₹39,817.93 Lowest |
| 1.01 | OD167721/2025-2026:Supplying and fitting 20mm square uPVC rain water gutter pipe with fittings 32x5mm MS flat support at 1m interval. | 28.6 | metre | 459 ₹13,127.4 | 450.06 ₹12,871.72 Lowest |
| 1.01 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil | 19.12 | cum | 243 ₹4,647.38 | 237.79 ₹4,547.73 Lowest |
| 1.01 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 12.75 | cum | 7,457 ₹95,076.75 | 7,322.06 ₹93,356.27 Lowest |
| 1.01 | 11.20.3:Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Dark shade pigment using ordinary cement | 127.5 | sqm | 1,160 ₹1,47,900 | 1,138.88 ₹1,45,207.2 Lowest |
Tender Value
₹8.5 L
EMD Value
₹21,170
Closing Date
23 Aug 2025, 11:00 amClosed
GEETHU MARIA JOSEPH
OFFICE OF ASSISTANT ENGINEER LID EW KAMAKSHY
64 KAMAKSHI PHC MAINTENANCE
2025_LSGD_786011_1
03/2025-26/AE/LSGD/KMY
Open Tender
Civil Works - Buildings
Item Rate
150 days
KAMAKSHY
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,870
Yes
₹21,170
Yes
29 Oct 2025
14 Aug 2025
25 Aug 2025
14 Aug 2025
23 Aug 2025
14 Aug 2025
Amount
Building maintenance
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD105071/2025-2026:Designing, fabricating, testing, installing and fixing in position Curtain wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear projections of the building, for all the heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it water tight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with kynar 500 based PVDF/ Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (service) on face # 2 as specified using stainless steel screws, nuts, bolts, washer, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS316, Nylon seperators to prevent bi-metallic contacts all complete required to perform as per specification and drawing . The item includes cost of all material & labour components, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminium Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
OD105072/2025-2026:Providing and fixing projected 2D Acrylic Letter Signage on ACP cladding with best quality multiwood and acrylic sheet of approved brand and manufactured as directed by dept.
21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
OD167721/2025-2026:Supplying and fitting 20mm square uPVC rain water gutter pipe with fittings 32x5mm MS flat support at 1m interval.
2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
11.20.3:Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Dark shade pigment using ordinary cement
Kadaladimattathu (BID ID -2303811)
Bidder Name
Kadaladimattathu
JOSE VARKEY
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1292092.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .