Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹28.8 L
EMD Value
₹29,000
Closing Date
30 Jan 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, Panchayat R&B Dn. Gandhinagar
Construction of New Gram Panchayat Building At BahiyalVillage Under CDP - 5 (2025-26) Taluka: Dahegam, Dist.: Gandhinagar
268973
33/2025-26
Open
Civil Works - Buildings
Works
Gandhinagar
7 documents required · 6 mandatory · 1 optional
₹1,500
Yes
Executive Engineer, Panchayat R & B Division, Gandhinagar
₹29,000
Yes
23 Jan 2026
23 Jan 2026
23 Jan 2026
30 Jan 2026
23 Jan 2026
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
Excavation for foundation upto 1.5 M depth
including sorting out and stacking of useful
materials and disposing of the excavated
stuff upto 50 M lead (A) Loose or Soft Soil
Excavation for foundation for depth from
m to 3.0 m including sorting out and stacking
2 of useful materials and disposing off the 16.00 Cum 157.16
excavated stuff upto 50 Meter lead. (A) Loose
or soft soil
Excavation for foundation for depth from
m to 3.0 m including sorting out and stacking
3 of useful materials and disposing off the 31.00 Cum 287.21
excavated stuff upto 50 Meter lead. (A) Loose
or soft soil
Filling foundation and plinth with sand under
4 floors including watering, ramming and 14.00 Cum 481.70
consolidating dressing etc, comp.
Filling in foundation and plinth with brick Bats
Chhara in layers of 20cm. thickness including
watering, remming and consolidating etc.
Filling foundation and plinth with murrum or
includind watering, ramming and
consolidating etc. comp.
Applying general insecticide pest control
treatment to floors, cupboards etc including
labour materials etc. complete. Using
Imidacloprid 30.5 SCas Per IS 6313 part - II(
7 (0.075% concentration by mass) is 78.00 Sqm. 91.63
recommended 10.5ml chemical diluted with
liters of water application 0.5 litre chemical
/Sqm of surface is recommended as per I.S
Providing and laying cement concrete 1:2:4
(1- Cement : 2- Coarse sand : 4- graded
8 stone aggregates 20 mm nominal size) and 5.00 Cum 4155.14
curing complete including cost of formwork in
(A) Foundation and Plinth
Providing and laying cement concret 1:1.5:3
(1 Cement : 1.5 coase sand : 3 graded stone
aggregrate 20mm nominal size) and curing
9 complete exculding cost of form work and 10.60 Cum 5043.94
reinforcement for reinforced cement concrete
work in (a) Foundation footing base of column
and mass concrete
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
Providing and laying nominal cement
concrete M-200 in R.C.C. 1:1.5 :3 (1 cement :
1.5 coarse sand : 3 graded stone agregate
mm. Nominal size) including finishing smooth
with curing complete including the cost of
form work but excluding the cost of
reinforcement for R.C.C. work in column Upto
plinth level.
Providing and laying nominal cement
concrete M-200 in R.C.C. 1:1.5 :3 (1 cement :
1.5 coarse sand : 3 graded stone agregate
mm. Nominal size) including finishing smooth
with curing complete including the cost of
form work but excluding the cost of
reinforcement for R.C.C. work in column Upto
plinth level.
Providing and laying nominal cement
concrete M-200 in R.C.C. 1:1.5:3 (1 cement
:1.5 coarse sand : 3 graded stone agregate
20 mm. Nominal size) including finishing
smooth with curing complete including the
cost of form work but excluding the cost of
reinforcement for R.C.C. work in
Providing and laying nominal cement
concrete M-200 in R.C.C. 1:1 1/2 :3 (1
cement :1 1/2 coarse sand : 3 graded stone
agregate 20 mm. Nominal size) including
finishing smooth with curing complete
including the cost of form work but excluding
the cost of reinforcement for R.C.C. work (c)
PLINTH BEAM
Providing and laying nominal cement
concrete M-150 in R.C.C. 1:2 :4 (1 cement :
coarse sand : 4 graded stone agregate
14 mm. Nominal size) including finishing smooth 7.80 Cum 4357.14
with curing complete including the cost of
form work but excluding the cost of
reinforcement for R.C.C. work PLINTH Slab
Providing and laying cement concrete 1:1.5:3
(M 200) and curing complete including the
cost of form work but including cost of
reinforcement for reinforced concrete work
for Column in Frist Floor
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
Providing and laying nominal cement
concrete M-200 in R.C.C. 1: 1.5 : 3 (1 cement
:1.5 coarse sand : 3 graded stone agregate
20 mm. Nominal size) including finishing
smooth with curing complete including the
cost of form work but excluding the cost of
reinforcement for R.C.C. work in LINTELS All
Providing and laying nominal cement
concrete M-200 in R.C.C. 1: 1.5 : 3 (1 cement
:1.5 coarse sand : 3 graded stone agregate
20 mm. Nominal size) including finishing
smooth with curing complete including the
cost of form work but excluding the cost of
reinforcement for R.C.C. work in CHHAJJAS
All Floor.
Providing and laying nominal cement
concrete M-200 in R.C.C. 1: 1 1/2 : 3 (1
cement :1 1/2 coarse sand : 3 graded stone
agregate 20 mm. Nominal size) including
finishing smooth with curing complete
including the cost of form work but excluding
the cost of reinforcement for R.C.C. work in
slabs for All Floor.
Providing and laying nominal cement
concrete M-200 in R.C.C. 1: 1 1/2 : 3 (1
cement :1 1/2 coarse sand : 3 graded stone
agregate 20 mm. Nominal size) including
finishing smooth with curing complete
including the cost of form work but excluding
the cost of reinforcement for R.C.C. work in
staircases for all floor
Providing T.M.T. bar FE500/500D
reinforcement confirmed to for R.C.C. work
20 including bending, binding, and placing. In 8680.00 Kg. 77.47
position comp. Up to floor two level. For All
Brick work using common burnt clay building
bricks having crushing strength not less than
21 35 Kg./Sq.m. in foundation and plinth in 16.00 Cum 4214.09
cement mortar 1:6 (1 cement:6 fine sand) (b)
Conventional.
Brick work using common burnt clay building
bricks having crushing strength not less than
35 Kg./ Sqm. in cement mortar 1:6 ( 1 cement
: 6 Fine sand ) in super structure above plinth
level upto floor two level ( for G.F )
Conventional
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
Half brick masonary in common burnt clay
building bricks having crushing strength not
less than 35kg./sq.cm. in cement mortar 1:3
(1 cement : 3 coarse sand ) with 2 nos. of
mm dia mild steel round bars every three
coarse embedded in cement mortar in
superstructure for Ground floor (Conventional)
Providing and fixing door Single shutter
mm.thick flush door teak wood beading 75 x
35mm including both side in situ laminate
with 18mm thick granite frame 6 Lever
24 Mortice lock , SS Aldrop 30cm long, SS 12.00 Sqm. 7020.51
Handle size 15 Cm Long, Tower Bolt size
cm etc. as per detail colour & pattern
approved by this office including necessary
anodized alluminum fixtures and fastenings.
Providing and fixing door Single shutter
mm.thick flush door teak wood beading 75 x
35mm including both side in situ laminate
with 18mm thick granite frame 6 Lever
25 Mortice lock , SS Aldrop 30cm long, SS 5.00 Sqm. 2377.76
Handle size 15 Cm Long, Tower Bolt size
cm etc. as per detail colour & pattern
approved by this office including necessary
anodized alluminum fixtures and fastenings.
Providing and fixing Anodized Alluminum
Section Jindal Deluxe Sliding Window
System C (30mm) series sction memebers
THREE track window section bottom track
20837, frame top & side 21203, shutter frame
26 top rail & bottom rail 20993, side rail 20553, 23.00 Sqm. 3325.93
lock rail 20550 with 5mm thick transparent
plain float glass, with transparent silicon
sealant with allu. anosized coated fittings and
fixture etc complete.
Providing and fixing standared extruded of
alluminium section of size 63mm x 38.10mm
x 1.2mm @ Wt. 0.643 Kg/mt) with colour
anodized alluminium frame for ventilation with
5 mm thick frosted glass as details etc
complete for Ventilation {Colour as directed
by Engineer in charge except black &
Alluminum section and glass
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
Providing and fixing Safty grills of required
pattern for windows 12mm dia M.S. round
Bar at .required spacing M.S. Flat 25mm x
5mm thick as per design and hold fasting with
coach bolts including one coat of primer and
Shall be Painting with Enamel Paint and
Colour approved by as per site Engineer etc
Providing and laying Machine cut, Free
edges, Machine polished Granite stone slab
18 mm thick {Single piece not more than
cm } for stair steps and riser as per design
incl. full moulded round front edge & 1 cm
29 nosing & necessary groobe on trade of steps 16.00 Sqm. 3280.48
laid on 20 mm thick cement mortar 1:6 (1 -
cement : 6 coarse sand ) jointed with grey
cement slurry including rubbing and polishing
etc. complete
Providing and laying 60 x 60cm Soluble Salt
Vitrified tiles 8 to 10 mm thick with pattern
colour & Shade as detailed approve by
architect ( 10% Dark colour tiles Pattern ) in
flooring treads of steps and landing laid on a
bed of 12mm thick cement mortar 1:3 (1-
cement : 3-coarse sand) finishing with flush
pointing in white cement.
Providing and laying 60 x 60cm Soluble salt
Vitrified tiles 8 to 10 mm thick with pattern
colour & Shade as detailed approve by
architect ( 10% Dark colour tiles Pattern ) in
skrting risers of steps and dedo on 10mm
thick cement plaster 1:3 (1-cement : 3-coarse
sand) and jointed with+B539 white cement
Providing and laying 30cm x 30cm in size
Ceramic tiles 6mm thick in flooring treads of
steps and landing laid on a bed of 12mm
thick cement mortar 1:3 (1-cement : 3-coarse
sand ) finishing with flush pointing in white
Providing and laying 30 x 60 Cm size
premium printed glazed tiles 6mm thick in
skrting risers of steps and dedo on 10mm
thick cement plaster 1:3 (1-cement : 3-coarse
sand) and jointed with white cement slurry
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
Providing and fixing pre-cast Rubber Dye /
steel Dye inter locking concrete block 60mm
thick with grade of concrete M300 pnumatic
compressed / vibrated mechanically and as
per approved design Confirming to IS 15658 :
2006 including 35 mm Sand layer for levelling
and filling the joint with sand in proper line
and level as per guidlines of IRC : SP 63-
2018 etc. Complete
Providing and laying water proofing tretment
with chaina mosaic tiles flooring bedding for
maintaining slope for plain and curve surface
& 12 mm to 20 mm of broken piece of
ceramic / glazed tiles ( one or more color as
directed ) to be laid over cement mortar
bedding of C M 1:3 (1 cement : 3 sand )
containg one Kg. of water profing materials
35 per bag of O P C at plain or / and slops and to 110.00 Sqm. 779.70
be tempered to bring mortar ceramic up to
surface with using white cement and colour
pigment including rounding of junctions and
extending them up to 15 cm along the wall
and curing with bends any pattens or design
as per drawing and cleaning by using oxalic
acid etc complete.
Providing and laying Mirror polished Machine
polished Grenite stone slab 18mm thick for
doors & windows sill & Jams clading as per
design including full moulded round front
steps & 1cm nosing & necessary groove on
36 trads of steps ;laid on 20mm thick cement 26.00 Sqm. 3395.62
mortar 1:6 ( 1 cement : 6 coarse sand )
jointed with gray cement sluury including
rubbing and polsihing etc. complete.for Doors
/ windows sill & jams clading.
Providing 20 mm thick double coat mala
cement plaster on interior brick / concrete
work for plastering comprising of base coat of
12 mm thick cement plaster in cement mortar
37 (1 Cement : 4 coarse sand) in rough finishing 365.00 Sqm. 299.98
and 8 mm thick top coat of cement mortar 1:2
(1 Cement : 2 Coarse sand) finished with
trovel including scaffolding curing etc.
complete. For Ground Floor
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
Providing 10mm thick cement plaster in
single coat on brick/concrete walls for interior
plastering upto floor two level and finished
38 even and smooth in (i) Cement mortar 1:3 (1- 167.00 Sqm. 221.75
cement:3-sand) including finishing with a
flating coat of neat cement slurry etc.
complete. for Ground Floor
Providing and fixing chiken mesh jali with
square of 12.50 x 12.50 mm of 25 gauge at
junction the Brick.masonary and
reinforcement cement concrete member
including fixing materials scaffolding labour
etc. complete
Applying two coats of putty & two coats of
primer of approved brand and manufacture
on new wall surface to give an even shade
including thoroughly brushing the surface free
from mortar dropping and other foreign matter
and sand papered smooth.
Wall painting one coats of primer of approved
brand (Two coats) plastic emulsion paint of
approved brand and manufacture on
undecorated wall surface to give an even
shade including throughly brushing the
surface free from mortar droppings and other
foreign matter and sand papered smooth.
Wall painting one coats of primer of approved
brand & ( Two coats) with plastic emulsion
paint of approved brand and manufacture on
undecorated ceiling surface to give an even
shade including throughly brushing the
surface free from mortar droppings and other
foreign matter and sand papered smooth.
20 mm thick sand faced cement plaster on
walls upto height 10 metres above ground
level consisting of 12mm thick backing coat
of C.M. 1:3 (1-cement : 3-sand) and 8 mm
thick finishing coat of C.M. 1:1 (1-cement : 1-
sand) with 1 cm x 1 cm groovs as per pattern
sample approved by the engineer incharge
etc. complete.
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
Providing and fixing 90 cm high Stainless
steel railing made from anticorrocive S S pipe
of 50 mm dia (16Gauge) as hand rail with S S
38 mm dia (16Gauge) as a vertical support
fixed in RCC slab at 1.2m c/c including three
horizontal S S pipes of 25 mm dia (16Gauge)
at eqal distance fixed by 18.75 mm dia
(16Gauge) S S pipe including accessories as
per detailed drawing as directed etc.
Providing laying and jointing in true line and
level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for
cold water including fittings as approved by
Engineer In Charge. Pipe shall be fixed on
the wall with the help of clamp at every two
metre C/C or shall be concelled as directed
including necessary fittings etc. including
testing of pipe and joints and fixing the same
with adhesive solvent, including cost of all
materials.
Providing laying and jointing in true line and
level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for
cold water including fittings as approved by
Engineer In Charge. Pipe shall be fixed on
the wall with the help of clamp at every two
46 metre C/C or shall be concelled as directed 20.00 Rmt. 91.84
including necessary fittings etc. including
testing of pipe and joints and fixing the same
with adhesive solvent, including cost of all
materials. [B] 25mm dia.
Providing laying and jointing in true line and
level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for
cold water including fittings as approved by
Engineer In Charge. Pipe shall be fixed on
the wall with the help of clamp at every two
47 metre C/C or shall be concelled as directed 8.00 Rmt. 148.12
including necessary fittings etc. including
testing of pipe and joints and fixing the same
with adhesive solvent, including cost of all
materials.[D] 40 mm.
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
Providing laying and jointing in true line and
level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for
cold water including fittings as approved by
Engineer In Charge. Pipe shall be fixed on
the wall with the help of clamp at every two
48 metre C/C or shall be concelled as directed 2.00 No. 469.65
including necessary fittings etc. including
testing of pipe and joints and fixing the same
with adhesive solvent, including cost of all
materials.[D] 40 mm.
Providing and fixing uPVC Heavy Duty
Handle valve of aprroved brand and Quality
with required fitting and adhesive incl. fixing
the same with new pipe line as directed by
engineer in charge. (C) 40mm dia.
Providing, laying and jointing in true line and
level 75 diametre U.P.V.C (Type B)
conforming to IS 13592-1992 with one end
plain and other end socketed with rubber ring,
& fittings conforming to ISI 14735-1999 of
approved make for drainage system pipe line,
pipe shall be jointed with each other with
rubber lubricant, pipe shall be fixed on wall
50 using of PVC clamp of the size 110 mm 25.00 Rmt. 756.22
diametre x 149 mm length x 145 mm heigh at
every 2000 mm center to center or shall be
concealed in walls as directed including
necessary fittings such as bends, shoes etc.
including testing of pipes and joints and
jointed with adhesive solvent cement
including cost of all materials.
Providing and fixing to wall ceiling and floor
10.0 Kg. F/Cm2 working pressure poluthene
pipes of the following outside Dia. Low
51 densidy, complete with special flange 31.00 Rmt. 339.05
compression type fittings, wall clipsetc.
including making good the wall ceiling and
floor.(A) 110mm dia.
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
Providing, laying and jointing in true line and
level 110 diametre U.P.V.C (Type B)
conforming to IS 13592-1992 with one end
plain and other end socketed with rubber ring,
& fittings conforming to ISI 14735-1999 of
approved make for drainage system pipe line,
pipe shall be jointed with each other with
rubber lubricant, pipe shall be fixed on wall
52 using of PVC clamp of the size 110 mm 34.00 Rmt. 876.90
diametre x 149 mm length x 145 mm heigh at
every 2000 mm center to center or shall be
concealed in walls as directed including
necessary fittings such as bends, shoes etc.
including testing of pipes and joints and
jointed with adhesive solvent cement
including cost of all materials.
Providing, laying and jointing in true line and
level 160 diametre U.P.V.C (Type B)
conforming to IS 13592-1992 with one end
plain and other end socketed with rubber ring,
& fittings conforming to ISI 14735-1999 of
approved make for drainage system pipe line,
pipe shall be jointed with each other with
rubber lubricant, pipe shall be fixed on wall
53 using of PVC clamp of the size 160 mm 10.00 Rmt. 834.38
diametre x 210 mm length x 196 mm heigh at
every 2000 mm center to center or shall be
concealed in walls as directed including
necessary fittings such as bends, shoes etc.
including testing of pipes and joints and
jointed with adhesive solvent cement
including cost of all materials.
Providing and fixing PVC SWR Nahni trap IS
14735 for drain - 100 mm diameter with jali of
the following nominal diameter of self
cleansing design with C.I scread down or
hinged grating including the cost of cutting
and making good the walls.
Providing and fixing screw down quarter turn
heavy duty bib taps of following size (A)
55 Brass chromium plated screw down bib tap (i) 6.00 No. 186.83
15mm dia. ( Plumber, Mark, Escco or
equivalent brand
Providing and fixing CP brass Quarter turn
pillar tap, capstan head screw down high
56 pressure with screw, shanks and back nuts 3.00 No. 308.73
(A) 15 mm dia {Jaquar< Plumber, Mark Long
pipe or equivalent brand}
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
Providing and fixing wash basin with pedestal
of std. Height with single hole for pillar tap
with C.I or M.S brackets painted white
including cutting cutting holes and making
good the same including C.P. brass waste
and waste pipes and bottal trap (A) Vitreous
China: (ii) Flat Back washbasin 550 mm x
400mm size. In colour.
Pro. & Fix. wash down water closet (anglo
indian W.C pan of Vitreous china Patern.)
with integral" p " or " s " trap and PVC
flushing cistern with a pair of C.L.I. Or Mild
steel Brackets, complete with fittings such as
lead value siphon, 15 mm. Nominal size
brass ball valve with polythene float, C.P.
Brass handle unions and couplings for
58 connections with inlet, outlet and over flow 3.00 No. 3223.92
pipes, 40 mm. dia. flush bend including
cutting holes in walls and making good the
same connecting the flush bend with cistern
and closet etc comp incl plastic sheet cover
including jointing trap with pipe in cm 1:1 (a )
Vitreous china in white or color
Providing erecting and fixing double coated 4-
layer tough virgin plast ISI water tank of
59 required capacity each with all necessary 1000.00 NO. 11.11
fittings and connection etc. complete on
Providing and fixing 600mm x 450mm
bevelled edge mirrror of superior glass
60 mounted on 6mm thick A.C. sheet or plywood 3.00 No. 859.41
sheet and fixing to wooden pluge with C.P.
brass screws and washers.
Providing and fixing C.P. brass towel rail
comlete with C.P. brass brackets fixed to
wooden plugs with C.P. brass scews.(B)
600mm x 20mm size.
Providing and fixing C.P. brass towel rail
comlete with C.P. brass brackets fixed to
wooden plugs with C.P. brass scews.(B)
600mm x 20mm size.
Providing and fixing CP brass screw down
stop cock of approved quality 15mm size with
adjustable wall flange..or as per instrction of
engineer incharge.
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
Constructing brick masonry chamber for
underground C.I. Inspection chamber and
bends with briocks having croshing strength
not less than 35Kg. Cm2 in C.M. 1:5 C.I.
cover with frame (Light duty) 455mm x
610mm intenal dimensions, total weight of
cover with frame to be not less than 38Kg.
(Wt. of cover 23 Kg.) and Wt. of frame 15Kg.
64 ) (R.C.C. top slabe with 1:2:4 mix (1- cement 2.00 No. 2932.93
:2- coarse sand :4-graded stone aggregate
20mm size) foundation concrete 1:5:10 inside
plaster 15mm thick with cement mortar 1:3
finished smooth with a floating coat of neat
cement on walls and bed concrete etc.
complete.(i) Inside dimensions 455mmx
610mm and 450mm deep for single pipe line.
Constructing brick masonry chamber for
underground C.I. Inspection chamber and
bends with briocks having croshing strength
not less than 35Kg. Cm2 in C.M. 1:5 C.I.
cover with frame (Light duty) 455mm x
610mm intenal dimensions total weight of
cover with frame to be not less than 38Kg.
(Wt. of cover 23 Kg.) and Wt. of frame 15Kg.
65 ) (R.C.C. top slabe with 1:2:4 mix (1- cement 2.00 No. 3660.76
:2- coarse sand :4-graded stone aggregate
20mm size) foundation concrete 1:5:10 inside
plaster 15mm thick with cement mortar 1:3
finished smooth with a floating coat of neat
cement on walls and bed concrete etc.
complete.(ii) Inside dimensions 500mm x
mm and 450mm deep for pipe line with one
or two inlets.
Finishing wall with weather proof exterior
emulsion paint on wall surface (two coats) to
give an required shape even shade after
thoroughly brushing the surface to remove all
dirt, and remains of loose powdered
materials.etc complete
Providing thoruting or plaster drip and
moulding to R.C.C. chhajja.
Constructing Septic Tank of size 2.5 x
external and 1.50mt. depth with necessary
68 excavation, brick masonary, RCC slab 1.00 No. 25851.96
including joint PVC pipe and filling the
trenches etc. comp.
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
Providing sock pit of 5.00 Cu.M. Volume
including excavating and filling brickbats with
dry masonry work at top for 45cm. height
including covering the top with stone
including providing vatas in C.M. 1:3 with
finishing curing etc. complete as directed.
Point wiring for Light / Bell with 2-1.5 sq.mm
& earth wire of 1.5 sq.mm (Green) both are of
ISI marked 1.1 KV grade FRLS PVC
insulated multi strand copper wires up to
mtr length , in below type of pipe erected with
6A Modular type switch / bell push &
accessories and earth continuity of following
type, erected on PVC / Metallic/ Wooden box,
70 single mounting base frame covered with 20.00 Points 404.00
extured/ metallic/ white front plate modules
erected on / in wall / ceiling as per pipe
erected, with necessary Lamp holder/ceiling
rose / H.D.Connector as directed. (a) with
medium class Rigid PVC pipe and
accessories erected flushed on wall/ceiling
Point wiring for FAN with 2-1.5 sq.mm & earth
wire of 1.5 sq.mm (Green) both are of .ISI
marked 1.1 KV Grade FRLS PVC insulated
multi strand copper wires up to 10 mtr length,
in below type of pipe erected with 6A Modular
type switch and hum free EME step type
electronic fan regulator mounted and
accessories with earth continuity of following
type erected on PVC / Metallic/Wooden box,
71 single mounting base frame covered with 6.00 Points 590.85
textured/metallic/white front plate modules
erected on / in wall / ceiling as per pipe
erected. with necessary ceiling rose /
H.D.Connector as directed. (a) with medium
class Rigid PVC pipe and accessories
erected flushed on wall/ceiling complete
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
Point wiring for Individual Plug with & earth
wire of 1.5 sq.mm (Green) both are of ISI
marked 1.1 KV grade FRLS PVC insulated
multi strand copper wires up to 10 mtr length,
in below type of pipe erected complete with
Modular type switch & 5 pin Plug erected on
PVC / Metallic/Wooden box covered with
72 appropriate front plate modules erected on / 4.00 Points 439.35
in wall / ceiling as per pipe erected with
following type of accessories. [I] For 6A Plug
and 6 a switch with 2-1.5 sq.mm Cu. Wire
from nearby switchboard/mcb db board (a)
with medium class Rigid PVC pipe and
accessories erected flushed on wall/ceiling
Point wiring for on board Looped Plug with 6A
Modular type switch & 5 pin socket erected
on PVC / Metallic/Wooden box, single
73 mounting base frame covered with textured / 4.00 Points 232.30
metallic/white front plate modules erected on
/ in wall / ceiling with following type
accessories , Cat. III.
Providing and erecting ISI mark Medium
class RIGID PVC PIPES of following size
complete to be erected on/in wall or ceiling
74 erected with necessary PVC fittings & 150.00 Mtr 21.21
Junction boxes fixed with adhesive solution &
Clamps with following dia of pipes, in
approved manner as directed (A) 20 mm
Providing and erecting Mains with 1.1 KV
grade FRLS PVC insulated ISI marked
stranded Copper conductor wire in following
type of pipe to be erected concealed in
/flushed on wall/ceiling, with 1.5 sq. mm
copper conductor FRLS PVC insulated
stranded wire of green colour for earth
continuity of following size (A) With medium
class Rigid PVC pipe and accessories. (b)
wire 2.5 sq. mm
Providing and erecting Mains with 1.1 KV
grade FRLS PVC insulated ISI marked
stranded Copper conductor wire in following
type of pipe to be erected in / on wall / ceiling
with 2.5 sq. mm copper conductor FRLS PVC
insulated stranded wire of green colour for
earth continuity of following size (A) with
medium class Rigid PVC pipe and
accessories (a) 2 wire 4 sq. mm
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
Providing and erecting Mains with 1.1 KV
grade FRLS PVC insulated ISI marked
stranded Copper conductor wire in following
type of pipe to be erected in / on wall / ceiling
with 2.5 sq. mm copper conductor FRLS PVC
insulated stranded wire of green colour for
earth continuity of following size (A) with
medium class Rigid PVC pipe and
accessories (a) 2 wire 4 sq. mm
Providing and erecting Miniature circuit
breaker single pole 6A to 25A suitable to
operate on 240 V A.C. system and having
breaking capacity 10 KA to be erected in
existing box. confirming to IS 8828/1996 with
ISI Mark (A) 6 to 32 Amp. CAT-III
PROVIDING AND ERECTING DOUBLE
POLE MCB ISOLATOR A.C.22 DUTY
CONFIRMS TO IS13947-3 240V 40 IN
EXISTING BOX.
Approved Make ELCBs/RCCBs Conforming
to IS12640 and Having Sesitivity of 30 Ma
and Short Circuit Withstand Capacity of 6KA
and Suitable for Operation on Single Phase
240 V +B1034 Having Characteristic of Quick
Action & Tripping with All Advance Feature &
Do not Incorporate any electronic component
for Following Max Rating Erected as Directed
(ii) 40AMPS.DP CAT-III
Supplying and erecting LED indoor fittings
with LEDs of wattage 0.2 Watt to 0.5 Watt
assembled on single MCPCB, with housing
used as a heat sink shall be made of thick
sheet Steel conforming to IS: 513/CRCA/
aluminium die cast powder coated and high
U.V. & corrosion resistance with diffuser with
company mark/name 160V to 270V, Power
Factor more than 0.95, THD < 15%, CCT
81 3000 K to 6500K, Luminaire efficacy> 85 8.00 Each 353.50
lumens/ watt ,LED LED driver efficiency >
% ( fitting required LM-79 & LM-80
Certificates)(NOTE: Below description have
shown ranges of Wattage capacity of LED
wattage capacity between the ranges shown.)
(A) Tube Light with integral driver (iv) 22-24
Watts, Surge - 2KV,IP-20, conventional 4 feet
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
Supplying and erecting led lamps with
following wattage capacity of 220 to
voltage, minimum 15000 burning hours life,
82 500 V in built-surge protection, Polycarbonate 5.00 Each 101.00
diffuser, mounting suitable for E14 / E27 /
B22 lamp holders, pf >= 0.5 (ii) 5 to 8 watts
Providing and erecting Approved make
Ceiling fan with double ball bearing ISI mark
with condenser A.C. 23OV.50 c/s.1200 mm.
83 sweep complete, canopy erected on existing 5.00 Each 1565.50
hook or clamp with earthing. [Make shall be
approved by Engineer in charge]
Providing & erecting Switch board for
Computer or electric apparatus consisting of
following modular type accessories mounted
with PVC / Metallic concealed/open box with
single mounting base frame covered with
84 textured/metallic /white front plate,modules 2.00 Each 1111.00
erected with necessary connections as
directed, 1 no. 6A/16A universal plug-switch
combined. 3 nos. 6A Switch 3 nos. 6A 5 pin
Plug For Modular Type Accessories
Decorative call bell Ting-tong box type
volts complete erected
Providing and erecting Pipe type earthing
with 40 mm dia 2.5 mtr long 'B' grade G.I.
pipe with necessary coupling buch buried in
86 specially prepared earth pit & G.I. earth wire 1.00 Each 555.50
of 8 SWG erected & connected as directed
(For panel)
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
For using salt and charcoal / coke as required
87 for pipe type earthing 1.00 Each 111.10
UGVC Ltd. meter connection charges
Total Rs.
Rupees TwentyEight Lakh EightyOne Thousand Six Hundred TwentyThree and Paisa TwentyFive
I / We / am/are willing to carry out the work at ________________________________% above / below
percent (should be written in figure and words) of the estimated rates mentioned above. Amount of
my/our tender Works out as under.
Estimated Amount Estimated Amount
put to tender Rs. _________ put to tender Rs. _________
Deduct_______% below Add_______% above
Net Rs._________ Net Rs._________
in words ___________ in words ___________
The Contractor shall exhibit a board with detailed specification and details of work as directed by
the Engineer-In-Charge for which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills.
In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.
G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in
4 R.C.C. items where there is a change as per actual mix design the cost of difference of cement
consumption have been deducted from the rate of original item at the rate of input rate
mentioned in all the tender.
Dismentalling of Credit materials amounting of Rs. 0.00 must be recovered from Contractor's
respective R.A. Bill.
Signature of Contractor
Dy. Executive Engineer Executive Engineer
Panchayat R.&B Sub Division Panchayat R.&B.Division
Dahegam Gandhinagar
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ- GP Bahiyal.pdf
BUILDING WORK BOOKLET.pdf
General Specification - Building.pdf
GR - 1.pdf
GR - 2.pdf
SBD Book_Gram Panchayat Building at Bahiyal Village.pdf
Specification Index - Gram Panchayat Building at Bahiyal Village.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .