REPAIRS TO DRAIN BOUNDARY WALL FENCING GATES CULVERT ETC IN ZONE C AREA UNDER AGE BR (N) NO I OF GE (N) SECUNDERABAD

Dismantling posts or struts ( wood, steel, or RCC ) any section, including taking out embedded portion and making good disturbed ground for posts embedded in natural ground including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

Dismantling posts or struts ( wood, steel, or RCC ) any section, including taking out embedded portion and making good disturbed ground for posts embedded in concrete, brick work, masonry etc. including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

Excavation in post holes (or similar holes) each n. exc 0.5 cu.m, getting out, returning filling in and well ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface in hard / dense soil complete all as specified and directed.

S&F Rolled mild steel,structural steel work as in Joist, channel, angle or tee sections, fixed independently , without connection plate etc cut to ordinary length within 20mm of the length conforming to Fe 410-W (Gde E-250 quality-B) complete all as specified and as directed

S & F Mild steel TMT bars 10 mm dia over, cut to length, bent to shape required including crancking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia securing with clips complete all as specifed and directed.

All as per item No 05 above, but 6 mm to 8 mm dia complete all as spd and directed.

M&L Providing precast RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in fencing post and similar work complete all as specified and directed.

M&L PCC (1:4:8) type D2 (using 40mm aggregate stone aggregate) as in foundatons, filling and mass concrete complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F MS Framed work such as gates,grills, gratings,hook and Pintle higes for large steel gates ,railing etc including round headed screws or welding seams including bending or turning up mitred angles etc as required etc, with ends of bars shouldered and/or riveted, or forged into spiles; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; gates, railings,rollers etc and similar work conforming to Fe 290,Gde-E165 and complete all as specifed and directed

S&F 1.00 mm thick mild steel, plain,black sheet in wall cladding, steel gates and similar work cut size, holes punched, including round headed screws or welding seams including bending or turning up mitred angles etc complete all as specified and directed.

M&L Welding in repairs not exceeding 2.5 cm in length with thickness of metal not exceeding 6mm complete all as specified and as directed by Engineer-in-Charge.

M&L Welding in repairs exceeding 2.5 cm but not exceeding 5 cm in length with thickness of metal not exceeding 6mm complete all as specified and as directed by Engineer-in-Charge. Note: (1) Works shall be carried out in multi storey Building upto 2nd floor.

M&L Preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and as directed.

Dismantling of fencing wire mesh of any type including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

Supply only mild steel galvanised chain link fencing of any size or type complete all as specified and as directed

Fixing for chain link fencing including line wires, any mesh, size, rails, straining bolts, etc. including provision of binding wire. (Chain link fencing and line wire shall be paid at supplied only rate) complete all as specifed and directed.

S&F Mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5 cm long but not exceeding 10 cm long, 5 to 10 mm dia of neck complete as specified and directed.

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specifed and directed. (each line wire to be measured)

Demolition of brickwork or stone/boulder masonry / Block masonry, built in cement mortar including facing, dressed stone work and precast concrete all quoins, arches, pillars, coping etc but excluding ashlars articles including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L Walling of squared rubble masonry regular coursed, Secunderabad and Bangalore type, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and as directed

All as per item No 21 above, but except stones complete all as specified and directed. Note: Serviceable stones obtained vide item No.20 shall be reused after removing mortar and cleaning with water complete all as specifed and directed.

M&L Brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius built in CM (1:6) complete all as specified and as directed.

Demolition of concrete in ground floors (un re-inforced) and paving n.exc. 15 cm thickness (below or above ground level) and including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided including roof padding concrete and including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M & L Precast cement concrete block masonry with solid blocks exceeding 10cm in width by using solid blocks of PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) and set in CM (1:6) complete all as specified and and directed.

Taking down cement or cement lime mortar plaster, any description on brick or stone walls etc, including rackingout joints, hacking for key, scrubbing down with water etc and including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L Rendering 15 mm thick in CM (1:6) on brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

M&L Rendering 10mm thick CM (1:6) on brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

M&L Rendering 15 mm thick in CM (1:4) on brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

M&L Raised pointing of random or polygonal rubble uncoursed or brought upto courses in CM (1:4) complete all as specified and as directed

M&L 25 mm thick (measured solid),louvers and jallies of size 60 x 60 or 60 x 90 cm with using precast cement concrete (1:2:4) type B0 (using 12.5 mm graded stone aggregate) including all mouldings set in CM (1:4) and complete all as specified and as directed.

M&L Providing PCC (1:2:4) type B-1(using 20mm graded stone aggregate ) as in surface channels and drains etc complete all as specified and as directed.

M&L Extra for forming fair finished drain or channel 25 centimetre inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stop ends etc. complete all as specified and as directed

M&L Preparation of new plastered wall surfaces and applying three coats of white wash to match with the existing surface complete all as specified and as directed.

M&L 75 mm thick PCC (1:4:8) type D2 (using 40 mm graded stone aggregates) as in subbase to floor complete all as specified and as directed.

M&L 60 mm thickness, Machine pressed precast concrete interlocking paver blocks, M-35 grade with grey cement and pigment (glossy finish) any shape & size conforming to IS 15658-2006 complete all as specified and as directed.

M&L 80 mm thickness, Machine pressed precast concrete interlocking paver blocks, M-40 grade with grey cement and pigment (glossy finish) any shape & size conforming to IS 15658-2006 complete all as specified and as directed.

M&L Sand/ grit filling or cushioning below interlocking tiles including spreading and levelling complete all as specified and as directed.

M&L Designer rubber moulded chequerred cement concrete tiles of size 300 x 300 x 22mm or 250 x 250 x 22mm thick with mixture of grey and white cemetn in equal porportions with pigments and set and pointed in neat cement slurry as in floors over and including 15 mm thick screed bed or bedding layier in CM (1:6) etc complete all as specified and as directed.

M&L Providing pre cast machine pressed cement concrete (1:2:4) type B-0 (using 12.50 mm graded stone aggregate) as in kerbs stones and fixing all as per manufacturer instructions etc complete all as specified and as directed. Note: size shall be decided and directed by GE