REPAIR TO STEEL FURNITURE INCLUDING PAINTING OF CERTAIN TRADE PATTERN FURNITURE UNDER GE WEST BAREILLY

Amount

ALMIRAH STEEL LARGE/MEDIUM WITH SHELVES (FD-67/FD-1031/FD-1032) M&L for replacement of following unserviceable parts of Steel Almirah large/medium all as specified and shown on drawing and as directed. All fixing and finishing, welding etc shall be done in accordance with the standard workmanship, drawings and as directed.

Lock of steel Almirah Large /Medium with MS lock 50 mm with 6 lever brass, Godrej pattern with duplicate keys fixed with suitable screws & nuts, best quality as approved. Make: Harrison, Link, Godrej.

Handle of Almirah large/Med steel with chromium plated 150 mm long Godrej pattern best quality as approved.

Bush (handle seat) of Almirah large/Med steel with best quality bush made of brass as per sample approved.

MS hinges 75 mm long heavy duty including necessary painting as per sample approved.

Corner cleats for supporting shelves made out of 3 mm thick MS black sheet, bent to the shape as per sample and to be fixed with suitable machine screws under shelves.

Base legs of Almirah large/med steel made out of MS black sheet 1 mm thick made to the rectangular shape of size 100mm heightX70mm wideX440 to 485mm long as reqd for almirah duly welded with Electric arc welding to the Almirah including necessary painting to match the existing surfaces all as directed.

Electric arc welding to the broken joints upto 10 cm long of Almirah large/medium steel as required including necessary painting to match the existing surfaces all as directed.

Shelves of Almirah large steel, made out of MS black sheet 1 mm thick of size 450X920mm, duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Shelves of Almirah medium steel, made out of MS black sheet 1 mm thick of size 405mmX765mm, duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Three way locking device made with 10mm mild steel round bar fixed with shutter of Almirah Large Steel complete with all accessories including lock,MS cover & handle size and shape as required as per drawing, duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Three way locking device made with 8mm mild steel round bar fixed with shutter of Almirah Medium Steel complete with all accessories including lock,MS cover & handle size and shape as required as per drawing, duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Cover made of 1mm thick MS sheet bent to the shape & size as per drawing suitable for Almirah large/Almirah Medium with shelves for locking device duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Removing of dents and bends of Almirah Large steel wherever required including welding where required, cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel paint Olive Green 1st grade over a coat of red oxide primer to internal surfaces including shelves and external surfaces up to a glossy finish complete.

Removing of dents and bends of Almirah Medium Steel, wherever required including welding where required, cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel paint Olive Green 1st grade over a coat of red oxide primer to internal surfaces including shelves and external surfaces up to a glossy finish complete.

ALMIRAH STEEL LARGE MAP(FD-E6/MAP18)M&L for replacement of following unserviceable parts of Almirah steel large MAP all as specified and shown on drawing and as directed. All fixing and finishing, welding etc shall be done in accordance with the standard workmanship, drawings and as directed.

Removing the u/s hanging road and S& F new hanging rod of 20mm dia chromium plated steel conduite pipe with side stoppers as per as specified and direrected.

Removing the u/s locker handle and S&F new locker handle of Godrej pattern as per existing shape and size.

Removing the u/s drawer handle and S&F new drawer handle of as per existing shape and size.

Removing the u/s steel handle and S&F new handle with chromium plated of Godrej pattern as per drg and spcified as directed.

Removing of u/s MS lock 50 mm and S&F new lock of 6 lever brass, Godrej pattern with duplicate keys fixed with suitable screws & nuts, best quality as approved. Make:Harrison, Link, Godrej.

Removing of dents and bends of Almirah Large steel MAP wherever required including welding where required, cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel paint as er existing 1st grade over a coat of red oxide primer to internal surfaces including shelves and external surfaces up to a glossy finish complete.

TABLE DINING OR'S (DRAWAING NO : FD-165) M&L for replacement of following unserviceable parts of Table dinning (OR’s) all as specified and shown on drawings and as directed by the Engineer-in-Charge. All fixing and finishing, welding etc shall be done in accordance with the standard workmanship, drawings and as directed

Table legs with 25 mm MS square tubes 760mm long, 1.6 mm thick , duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer to match with the existing colour complete.

Top frame long rail/long stiffner with 25 mm MS square tube 1.6 mm thick & 1600mm long, duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer to match with the existing colour complete.

Top frame short rail/short stiffner with 25 mm MS square tube 1. 6 mm thick & 515mm long, duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer to match with the existing surface over a coat of red oxide primer complete.

Table top with 18 mm thick MDF Pre-laminated board conforming to IS specifications as approved of size 1900 x 685 mm duly covered with 22 gauge thick aluminium sheet as required for top complete.

Replacement of rubber shoes with best quality hard rubber shoes as approved.

Electric arc welding upto 10 mm long to the MS pipe joints of table dinning ORs as required and as directed.

Removing dents and bends wherever required and cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coats of synthetic enamel paint olive green to all exposed steel surfaces by spray painting up to a glossy finished shade complete.

CHAIR VERANDAH (DRAWING NO : FD-359 & FD- 256) M&L for removing unserviceable plastic cane from the chair verandah and reweaving of seat & back of chair verandah steel with white plastic cane 4mm wide and 0.5mm thick closely knitted/canning with and including 4 Nos hard rubber shoe of each chairs shall also be provided to the legs of chair including removing dents / bends wherever required and cleaning all steel surface thoroughly by using abrasive cloth emery of various sizes and applying putty as required as per trade pattern and painting the steel chair verandah frame with one coat of white synthetic enamel paint of Ist quality over a coat of red oxide primer complete all as specified and directed.

CHAIR CB STEEL WITH/ WITHOUT ARMS/CHAIR CBA SPL W/HANDREST : DRAWING NO FD-75 AND FD-120(M) M&L for repair/replacement of following parts of chair CB steel with and without arms all as specified and shown on drawings. The welding/ fixing and finishing shall be done in accordance with standard workmanship/specifications.

Providing MS flat iron 20 x 4 mm of 600 mm long painted with olive green/black duly drilled holes of 3 mm for screwing purpose and fixing through continuous welding to under side of seat frame for fixing of seat complete.

Replacement of unserviceable hard wood seat frame of Chair steel with arm with 1st class hard wood(sheesam wood) seat frame of overall size 455x410mm containing each arm of size 25mm thick & 50mm wide. , well finished duly polished with black colour. The holes for canning shall be @ 12.5mm c/c and canning with plastic cane 2 mm wide, white half round for canning and 3 mm for edging as approved to be used. The canning shall be as per the Godrej pattern. The frame to be fixed with the steel tubular frame with suitable machine screws complete.

All as specified in item No 5.02 above but back rest frame for Chair steel with arm of size 455x 380 mm.

All as specified in item No 5.02 above but for Chair CB steel without arm seat frame of size 430x 380 mm.

All as specified in item No 5.02 above but for Chair CB steel without arm back rest frame of size 365x 380 mm

Replacement of unserviceable rubber caps for top end side of MS pipe 25 mm dia of chair CB steel as required and as directed.

Replacement of unserviceable rubber shoes of chair CB steel as per existing one.

Replacement of unserviceable arms rest of 1st class hard wood (Shisham) size as required as per drawing, well finished and shall be polished in a glossy black finished shade as directed.

Removing unserviceable cane plastic from the seat frame/back frame of any type of steel Chairs like Chair CB steel with arms/Chair CB without arm/Chair CB spl with hand rest/Chair CBA steel etc. Recanning the all types of wooden frame with plastic cane 2 mm wide half round for canning and 3 mm for edging. The canning shall be done as per Godrej pattern.

Removing the dents & bends wherever required and cleaning all steel surfaces of various steel Chairs like Chair CB steel with arms/Chair CB without arm/Chair CB spl with hand rest/Chair CBA steel thoroughly by using abrasive cloth emery various sizes and putty as required as per trade practice and applying two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer by means brush to a glossy finished shade all as specified and directed.

TABLE OFFICE CLERK STEEL : DRAWING NO FD-84/ FD-1004 M&L for replacement/ repair of following unserviceable parts of table office clerk steel all as specified and shown on drawings. All fixing and finishing, welding etc shall be done in accordance with the standard workmanship, drawings and as directed:-

Table top of 1200 x 600 mm with 18 mm thick MDF Prelaminated board of exterior grade as approved, including 6 mm thick teak wood edging duly polished to be provided to all around the table top complete.

Table drawer with drawers made out of 1 mm thick mild steel black sheet size and shape required and shown on drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Drawer lock of mild steel 50 mm, 6 lever (brass lever) of best quality with duplicate keys as approved.

Legs with 25 mm mild steel square tubes 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Stiffener with 25 mm size mild steel square tube 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint over a coat of red oxide primer complete.

Hard rubber shoes of best quality as approved.

Electric Arc welding upto 10 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Removing dents and bends wherever required and cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint olive green paint 1st grade over a coat of red oxide primer as approved by spray painting to all steel surfaces up to a glossy finished shade as directed.

TABLE OFFICE OFFICER STEEL : DRAWING NO : FD-84/ FD-1003 M&L for replacement/ repair of following unserviceable parts of table office officer steel all as specified and shown on drawings. All fixing and finishing, welding etc shall be done in accordance with the standard workmanship, drawings and as directed:-

Table top of size1680X870mm made of 18 mm thick MDF Prelaminated board of exterior grade, including 6 mm thick teak wood edging duly polished to be provided to all around the table top complete.

Table drawer with drawers made out of 1 mm thick mild steel black sheet size and shape required and shown on drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Drawer lock of mild steel 50 mm, 6 lever (brass lever) of best quality with duplicate keys as approved.

Legs with 25 mm mild steel square tubes 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Stiffener with 25 mm size mild steel square tube 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Hard rubber shoes of best quality as approved.

Electric Arc welding upto 10 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Removing dents and bends wherever required and cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coats of synthetic enamel paint olive green paint 1st grade over a coat of red oxide primer as approved by spray painting to all steel surfaces up to a glossy finished shade as directed.

TABLE 900x600x760MM WITH DRAWER / WITHOUT DRAWER :DRAWING NO : FD-1007 /FD-1008 M&L for replacement/ repair of following unserviceable parts of table steel all as specified and shown on drawings. All fixing and finishing, welding etc shall be done in accordance with the standard workmanship, drawings and as directed:-

Table top of size 900X600mm made of 18 mm thick MDF Prelaminated board of exterior grade, including 6 mm thick teak wood edging duly polished to be provided to all around the table top complete.

Table drawer with drawers made out of 1 mm thick mild steel black sheet size and shape required and shown on drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Drawer lock of mild steel 50 mm, 6 lever (brass lever) of best quality with duplicate keys as approved.

Legs with 25 mm mild steel square tubes 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Stiffener with 25 mm size mild steel square tube 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint over 1st grade over a coat of red oxide primer complete.

Hard rubber shoes of best quality as approved

Electric Arc welding upto 10 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel olive green paint 1st grade over a coat of primer complete.

Removing dents and bends wherever required and cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coats of synthetic enamel paint olive green paint 1st grade over a coat of red oxide primer as approved by spray painting to all steel surfaces up to a glossy finished shade as directed.

TABLE CENTRE BRASS DRAGWING No : FD-375 M&L for replacement/ repair of following unserviceable parts of table centre brass all as specified and shown on drawings. All fixing and finishing etc shall be done in accordance with the standard workmanship, drawings and as directed:-

Replacement of u/s/ broken glass top and S&F new glass top of size 1200x900x10mm as per drg all as specified and directed.

Replacement of u/s vaccum rubber shoes and S&F new vaccum rubber shoes as approved quality.

Replacement of u/s PVC rubber shoes and S&F new PVC rubber shoes as approved quality.

Removing dents and bends wherever required and cleaning all all brass surfaces thoroughly by using abrasive emery of various sizes and putty as required and applying two coats of brasso polish as per drawing.

CHAIR WRITING (STEEL) : DRAWING NO FD-E6/MAP/12) M&L for repair/replacement of following parts of Chair Writing all as specified and shown on drawings. The fixing and finishing shall be done in accordance with standard workmanship/specifications and as directed.

Replacement of arm rest made of polyurethen,black integrated scratch & weather proof skin with MS insert as per sample complete.

Replacement of upholstery of seat & back both of complete Chair with best quality Fabric as approved (Rate of fabric not less than Rs 250 per RM complete.

Replacemrnt of old/unservicable Seat & Back both of complete Chair made with 12 mm thick hot pressed plywood covered with 50mm thick & 50-55 density Polyurethene foam cushion,upholestered with best quality fabric as approved & PVC lipping allround the seat & back.Shape & size as per specified & shown in drawings & directed. (Cost of fabric not less than Rs 250 per RM complete.

CHAIR SCHOOL W/HAND BOARD : DRAWING NO FD-E6/MAP/05 M&L for repair/replacement of following parts of Chair school W/handboard all as specified and shown on drawings. The fixing and finishing shall be done in accordance with standard workmanship/specifications and as directed.

Replacement of hand board made of 18 mm thick both side prelaminated teak faced particle board of size 300x585mm with PVC edging allround the top & fixed with suitable screws complete.

Replacement of unserviceable & deficient 20mm dia MS rod welded to 25mm dia MS rod duly two coats of synthetic enamel paint 1st grade over a coat of red oxide primer to fix the hand board complete.

Removing one piece of PVC seat & back from Chair school with hand board and S&F a new PVC seat & back ISI Marked.

Removing dents and bends wherever required and cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and apply putty as required and applying two coats of synthetic enamel paint 1st grade over a coat of red oxide primer of required shade as approved by the spray painting to all steel surfaces up to a glossy finished shade as directed.

CHAIR COMPUTER/ EXECUTIVE (REVOLVING) : DRAWING NO : TP M&L for repair/replacement of following parts of Chair all as specified and shown on drawings. The fixing and finishing shall be done in accordance with standard workmanship/ specifications and as directed.

Replacement of arm rest made of polyurethen,black integrated skin with MS insert as per sample.

Replacement of twin wheel Castor 50mm dia as per sample

Replacement of Peddestrial assembly containing twin wheel castor made of PVC injection moulded in black as per sample.

Replacement of upholstery of seat & back with Fabric best quality as approved (Rate of fabric not less than Rs 250 per RM).

Replacemrnt of old/unservicable Seat & Back both of complete Chair made with 12 mm thick hot pressed plywood covered with 50mm thick & 50-55 density Polyurethene foam cushion,upholestered with best quality fabric as approved & PVC lipping allround the seat & back.Shape & size as per sample & directed. (Cost of fabric not less than Rs 250 per RM).

Removing dents and bends wherever required and cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint 1st grade of required shade as approved by the spray painting to all steel surfaces up to a glossy finished shade over a coat of red oxide primer as directed.

CHAIR COMPUTER : DRAWING NO : E6/MAP/01 M&L for repair/replacement of following parts of Chair computer all as specified and shown on drawings. The fixing and finishing shall be done in accordance with standard workmanship/ specifications and as directed.

Removing unserviceable back rest and S&F new adjustable back rest on 12mm thick Hot presed ply wood , upholstered with fabric and contoure lumber support for extra comfort with PVC lipping all around. Adjustable back rest shall consist of prolift mechanism and can be loked in 5 steps for better lumber support .

Replacement of u/s parts of synchro tilting set up.

Removing u/s seats and S&F new seat as per existing shape and size.

Removing u/s handle and S&F new handle having black integral skin, polyurethane reinforced with MS insert. It shall be scratch and weather rasistance.

Replacement u/s hydraulic assembly and S&F new hydraulic assembly as per existing shape and size.

Revoming u/s padestal assay with wheels and S&F new padestal assay with wheels, having 600mm pitch centre dia and a 10.05mm dia forged bright zinc plated MS castors pin is of press fitted into each prong for holding the castors as per specified and directed.

LEATHERITE CUSHION WITH FULL DESKLED & PAPER TRAY CHAIR, MAKE : GODREJ: FD- (TP) M&L for replacement of following unserviceable parts of leatherite cushion with full deskled & parper tray chair all as specified and shown on drawing and as directed. All fixing and finishing, painting and welding etc shall be done in accordance with the standard workmanship, drawings and as directed.

Removing u/s leatherite cushion seat and S&F new leatherite cushion seat and fix it properly with the help of screws as per existing shape and size.

Removing u/s leatherite cushion back rest and S&F new leatherite cushion back rest and fix it properly with the help of screws as per existing shape and size..

Removing u/s desklet set and S&F new desklet set as per existing shape and size.

Removing u/s paper tray and S&F new paper tray as per existing shape and size.

Removing us/ hard rubber shoes and S&F new hard rubber shoes as per existing shape and size.

LOCKER BED SIDE STEEL : DRAWING NO FD-257 / FD-1029 M&L for repair/replacement of following parts of Locker Bedside Steel all as specified and shown on drawings. The fixing and finishing shall be done in accordance with standard workmanship/specifications and as directed :-

Replacement of unserviceable/deficient "D" type chromium plated steel handle complete all as specified and directed.

Replacement of unserviceable 75mm long chromium plated steel hasp and staple complete all as specified and directed.

Replacement of unserviceable hanging rod made of MS chromium plated pipe made of 19mm dia 1.6 mm thick and 380mm long with socket complete all as specified and directed.

Electric arc welding to the broken joints upto 10 cm long of the Locker steel as required including painting to match the existing surface as directed.

Base leg of Locker steel made out of MS black sheet 1 mm thick made to the rectangular shape of size 100mm heightX50mm wideX 550mm long as reqd for Locker duly welded with Electric arc welding to the Locker including necessary painting to match the existing surface complete.

Removing of dents and bends wherever required including welding where required, cleaning the all steel surfaces by using various types abrasive cloth emery, filling with putty and two coat of spray painting with synthetic enamel paint Olive Green 1st grade over a coat of red oxide primer to internal surfaces including shelves and external surfaces up to a glossy finish complete.

FOAM WITHOUT BACK : DRAWING NO FD-77 (M) /FD -1027 M&L for repair/replacement of following parts of Form without back all as specified and shown on drawings. The fixing and finishing shall be done in accordance with standard workmanship/specifications and as directed.

Replacement of unserviceable top plank with 1st class hard wood, sheesham wood plank 25mm thick of size 1525x255mm free from all timber defects duly well finished as per drawing.

Cleaning the wooden/steel surfaces thoroughly by using abrassive cloth and applying putty as required as per trade practice and apply good quality of polishing to the wooden top & painting with synthetic enamaled Olive Green in a glossy finish shade on steel surfaces as directed.

STOOL STEEL (WITH BACK REST) TYPE II 300X300X510MM : DRAWING No : HFD - 2007 M&L for repair/replacement of following parts of stool steel (with back rest ) type II all as specified and shown on drawings. The fixing and finishing shall be done in accordance with standard workmanship/specifications and as directed.

Removing of u/s cushioned seat & S&F new cushioned seat of 350mm dia with accurate machine screw and two crossed MS flat of size 350x25x5mm all as directred per drg.

Removing of u/s cushioned back rest & S&F new cushioned back rest of existing size all as specified and directed.

Removing of u/s / broken MS ring and S&F new MS ring CRCA quality of 22mm dia ring as per drg.

Electric arc welding to the broken joints upto 10 cm long of Almirah stool steel with back rest type II as required including necessary painting to match the existing surfaces all as directed.

Removing u/s hard rubber shoes and S&F new hard rubber shoes as per drg

Cleaning the all steel surfaces by using various types abrasive cloth emery, filling with putty and two coat of spray painting with synthetic enamel black 1st grade over a coat of red oxide primer up to a glossy finish complete.

Notes:-

R. S. Associates

GUPTA IRON UDYOG

M/s R.K.Jain

JAISWAL ENTERPRISES

Kushwaha Enterprises