Construction of Type-IV quarter of Principal , Govt ITI at Rajgarh , District Sirmaur (H.P.) (SH Construction of building portion, construction of septic tank, site development and water supply and sanitary installation etc).

Amount

Excavation in earth work in hilly area in all heights and depths in all kind of soil including saturated soil comprising of mixed soil, ordinary rock and hard rock all work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damage to hill side,water pollution, etcetra and to protect stability of hill side rock shall be excavated with chiseling and wedging out rock (where blasting is prohibited). All earth work in cutting/excavation including rock excavation shall be carried, out true to lines, grades, side slopes, width, camber super-elevation and level as shown on the drawings or as directed by the Engineer-in-Charge, in conformit with the requirement of technical specification for Rural Road. clause 1603.1 and 1603.2 of General conditions for contract to achieve designed formation width including hauling and safe disposal of unsuitable cut materials upto all lead and lifts in specified manner i/c arrangement of dumping site trimming, filling of unevenness, blindage and finishing of the road to specified dimensions or as directed by the Engineer -in -Charge for smooth riding. The recovery for stones,whether useful or not, for 83.36 cum (Eighty three point thirty six cubic metre) in all cases, @ rupees 170/- only(Rupees one hundred seventy only) per cubic meter shall be effected on pro- rata basis. Any loss to the public and private property during the course of excavation shall be the absolute responsibility of the contractor, which shall compensated by him in all cases.

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. ,including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. ,including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Providing form work with steel plates 3.15mm(three point one five millimetre) thick welded with angle iron in frame 30x30x5mm ,so as to give a fair finish including centring ,shuttering ,strutting and propping etc. with wooden battens and ballies , height of propping and centring below supporting floor to ceiling up to all heights and removal of the same for insitu-reinforced concrete & plain concrete work in:

Foundations, footings, bases of columns, etc. for mass concrete

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Stairs, (excluding landings) except spiral staircases

Edges of slabs and breaks in floors and walls

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level in1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm (forty milimetre nominal size) including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm (Twenty milimetre) nominal size including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm (Twenty milimetre) nominal size. including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm (Twenty milimetre) nominal size including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Providing and fixing up to floor five level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete.1:1½:3 (1 Cement: 1½ coarse sand): 3 graded stone aggregate 20 mm (Twenty milimetre) nominal size including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges. .

Providing and laying cement concrete 1:4:8 (1 cement:4 sand:8 graded stone aggregate 40mm (Forty milimetre) nominal size and curing complete excluding cost of form work in Foundation and plinth. including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm (Twenty milimetre) nominal size laid in one layer finished with a floating coat of neat Cement 40mm (Forty milimetre) thick. including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Back filling behind abutment ,wing wall and return wall complete as per drawing and technical specificaition clause 1204.3.8 ,Granular material including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Providing weep holes in brick masonry/stone masonery plain/reinforced concrete abutment wingwall ruturn wall with 100mm (one hundred milimetre) dia AC pipe extending throught the full width of the structure withslopes of i(V):20(H) towards drawing face complete as per drawing and technical specification clause 614,709,1204.3.7 . including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand). including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level ,Cement mortar 1:4 (1 cement :4 coarse sand) including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, (five centimetre to twenty centimetre) in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required color and shade, with necessary screws etc. complete Single rubber stopper including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Providing and fixing bright finished brass hard drawn hooks and eyes : 250 mm ( Two hundred milimetre) size. including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:,35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws all complete as per direction of Engineer-in charge.

Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction of Engineer-in charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood

Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lapping of 25 mm (Twenty five milimetre) wide x12 mm (Tweleve milimetre) thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge.

Providing and fixing aluminum work for doors, windows, ventilators and partitions frames. Anodized aluminum (anodized transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required die and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) : All complete as per architectural drawings and the directions of Engineer-In-Charge.

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) ,Anodized aluminum (anodized transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) all complete as per direction of Engineer-in charge.

Providing and fixing Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked for paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Paneling for paneled or paneled and glazed shutters 25 mm to 40 mm (Twenty five milimetre to Forty milimetre) thick : all complete as per direction of Engineer-in charge.

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of die 0.63 mm, (zero point sixty three milimetre) for doors, windows and clerestory windows with hinges and necessary screws :35 mm (Thirty five milimetre) thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood all complete as per direction of Engineer-in charge.

Providing and fixing aluminum sliding door bolts, ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required color or shade, with nuts and screws etc. complete 300x16 mm : all complete as per direction of Engineer-in charge.

Providing and fixing aluminum tower bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required color or shade, with necessary screws etc. complete 250x10 mm all complete as per direction of Engineer-in charge.

Providing and fixing aluminum handles, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required color or shade, with necessary screws etc. complete 100 mm: including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Providing and laying precast terrazzo tiles 22 mm (Twenty two) milimetre thick with graded marble chips of size upto 12 mm, (Tweleve) milimetre laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm (Twenty) milimetre thick bed of cement mortar 1:4 (1 cement:4 coarse sand) Medium shades pigment using 50% white cement and 50% ordinary cement including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Kota stone slab flooring over 20 mm (Twenty) milimetre (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 11.26.1 25 mm thick including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved ake, in all colours & shade, in skirting, riser of steps, over 12 mm (Tweleve) milimetre thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm (Twenty milimetre thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Marble stone flooring Pink plain marble with 18 mm (Eighteen) milimetre thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (Twenty) milimetre (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm (Three) milimetre thick, bolts and nuts complete. including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Providing and fixing on wall face unplasticised - PVC molded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten) milimetre gap for thermal expansion. including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Single tee with door

coupler 110mm

bend 110 mm

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. :100 mm dia including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Providing and fixing ridges or hips of width 60 cm (Sixty) cenitimetre overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm (Eight) milimetre dia G.I. limpet and bitumen washers complete..0.63 mm thick with zinc coating not less than 275 gm/m including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Providing and fixing valleys of 90 cm (Ninety) centimetre wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm (Eight) milimetre dia G.I. limpet and bitumen washers complete :1.60 mm thick with zinc coating not less than 350 gm/ m including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Providing and fixing M.S. BP Sheet1.66 mm(One point sixty six millimeter) to 2mm (Two millimeter) thick in eves board/ facia/soffit/ceiling including cutting ,fixing and welding to steel roof members and applying a coat of red lead primer complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15 cm wide, 45 cm (Forty milimetre) overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.80 mm (Zero point eighty milimetre) thick with zinc coating not less than 275 gm/m² complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Providing and fixing M.S. fan clamp type I or II of 16 mm (Sixteen milimetre) dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Applying priming coat: ,With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Applying priming coat: ,With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/ steel works including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Providing and applying plaster of Paris putty of 2 mm (Two milimetre) thickness over plastered surface to prepare the surface even and smooth complete. including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 13.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 liter/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 liter/10 sqm. including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

6mm cement plaster to ceiling in cement mortar 1:3 (1 cement : 3 sand) including carriage of materials within all leads and lifts in all floor levels including carriage of materials within all leads and lifts :-

15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm (Thirty centimetre) in girth and finished even and sand opapered smooth including carriage of materials within allleads and lifts..Cement mortar 1:6 (1 cement : 6 sand) including carriage of materials within all leads and lifts in all floor levels including carriage of materials within all leads and lifts :-

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm (Thirty centimetre) in girth and finished even and smooth including carriage of materials within allleads and lifts. Cement mortar 1:6 (1 cement : 6 sand) including carriage of materials within all leads and lifts in all floor levels including carriage of materials within all leads and lifts :-

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface on all floor to give an even shade over and including priming coat of whiting after thoroughly brushing the surce even and sand papered smooth including carriage of materials within allleads and lifts.

Distempering with dry distemper of approved brand and manufacture(Two coats)and of required shade on undecorated wall surface to given an even shade over and including primer coat of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth. including carriage of materials within allleads and lifts.

Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :100x60x2.50 mm (Fifty milimetre) including carriage of materials within allleads and lifts.

Providing and fixing 20 mm dia (heavy type) chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : including carriage of materials within allleads and lifts.

Providing and fixing anodized aluminum grill (anodized transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminum standard section around the opening, all complete as per requirement and direction of Engineering-charge. (Only weight of grill to be measured for payment). including carriage of materials within allleads and lifts.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. including carriage of materials within allleads and lifts.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm (Seventy five milimetre) thick bed of dry brick ballast 40 mm (Forty milimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, leveling & dressing & finishing the top smooth. including carriage of materials within allleads and lifts.

Brick edging 7cm (Seven centimetre) wide 11.4 cm ( Eleven point four centimetre) deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand). including carriage of materials within allleads and lifts.

Providing and fixing 100 mm diameter and 60 cm (Sixty centimetre) long rain water spout in cement mortar 1:4 (1 cement : 4 fine sand). Stone ware spout including carriage of materials within allleads and lifts.

Providing and fixing 75 mm (Seventy five milimetre) x 62.5mm (Sixty two point five milimetre rounded hand rails in straight length complete in including carriage of materials within allleads and lifts.

Providing and fixing 85 (eighty five ) centimeter height railing with M.S Square bars 20 (twenty millimeter) size balusters at 30 cm (thirty centimeter) Centre to centre duly welded with 2 Nos (Two Numbers) MS flat 40x6 mm (Forty into six millimeter) size and 20 (Twenty millimeter) M.S square bars lugs 10 (Ten centimeter) Long at lower end of balusters embedded in RCC steps or waist slab including prime coat of steel primer and painting with steel enamel paint other than white (Excluding handrail which should be measured and paid separately) including carriage of materials within allleads and lifts.

Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. including carriage of materials within allleads and lifts.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. 100/110 including carriage of materials within allleads and lifts.

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc. including carriage of materials within allleads and lifts.

1216 (16 mm OD) pipe

1620 (20 mm OD) pipe

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etc. including carriage of materials within all leads and lifts.

1216 (16 mm OD) pipe

1620 (20 mm OD) pipe

Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately). including carriage of materials within all leads and lifts.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. including carriage of materials within all leads and lifts.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriage of materials within all leads and lifts.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. including carriage of materials within all leads and lifts.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten milimetre) gap for thermal expansion. including carriage of materials within all leads and lifts.

110mm bend

75 mm bend

Providing and fixing collar :

Providing and fixing Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905 including carriage of materials within all leads and lifts.

Providing and fixing single equal plain invert branch of required degree : including carriage of materials within all leads and lifts :-

Providing and fixing double equal plain invert branch of required degree: including carriage of materials within all leads and lifts :-

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm (Twenty milimetre) nominal size including cost of cutting holes and making good the walls etc. :For 100 mm dia pipe including carriage of materials within all leads and lifts :-

Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : including carriage of materials within all leads and lifts :-

Slotted cowl (terminal guard) 100 mm dia

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outlet including carriage of materials within all leads and lifts :-

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid including carriage of materials within all leads and lifts :-

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White including carriage of materials within all leads and lifts :-

Providing and fixing in position 25 mm (Twenty five milimetre) diameter mosquito proof coupling of approved municipal design. including carriage of materials within all leads and lifts :-

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. including carriage of materials within all leads and lifts :-

Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin: 32 mm (Thirty two milimetre) dia including carriage of materials within all leads and lifts :-

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)15 mm nominal bore including carriage of materials within all leads and lifts :-

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. Providing and fixing C including carriage of materials within all leads and lifts :-

Providing and fixing 100 mm (One hundred milimetre) sand cast Iron grating for gully trap.including carriage of materials within all leads and lifts :-

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm (Six milimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. including carriage of materials within all leads and lifts :-

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms including carriage of materials within all leads and lifts :-

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (Forty milimetre) long screws, rawl plugs etc., complete. including carriage of materials within all leads and lifts :-

Providing and fixing toilet paper holder : C.P. brass including carriage of materials within all leads and lifts :-

Providing and fixing PTMT liquid soap container 109 mm (One hundred nine milimetre) wide, 125 mm (One hundred twenty five milimetre) high and 112 mm (One hundred tweleve milimetre) distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. including carriage of materials within all leads and lifts :-

Providing and fixing PTMT soap Dish Holder having length of 138mm, (One hundred thirty eight milimetre) breadth 102mm, (One hundred two milimetre) height of 75mm (Seventy five milimetre) with concealed fitting arrangements, weighing not less than 106 gms. including carriage of materials within all leads and lifts :-

Providing and fixing brass bib cock of approved quality :15 mm (Fifteen milimetre) nominal bore including carriage of materials within all leads and lifts

Providing and fixing wash basin with C.I. brackets, 15 mm (Fifteen milimetre) C.P. brass pillar taps, 32 mm (Thirty milimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm (Fifteen milimetre) C.P. brass pillar tap including carriage of materials within all leads and lifts :-

Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm (Forty milimetre) C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required:White glazed fire clay kitchen sink of size 600x450x 250 mm including carriage of materials within all leads and lifts :-

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15mm (Fifteen milimetre) nominal bore including carriage of materials within all leads and lifts :-

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm (Fifteen milimetre) nominal bore including carriage of materials within all leads and lifts :-

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm (Fifteen milimetre) nominal bore including carriage of materials within all leads and lifts :-

Providing and fixing 8 mm (Eight milimetre) dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. including carriage of materials within all leads and lifts :-

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.flexible pipe 32 mm (Thirty two milimetre) dia including carriage of materials within all leads and lifts :-

Providing and fixing soil, waste and vent pipes 100 mm (One hundred milimetre) dia 17.35.1.1 Sand cast iron S&S pipe as per IS: 1729 including carriage of materials within all leads and lifts :-

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.15 mm (Fifteen milimetre) dia nominal bore including carriage of materials within all leads and lifts :

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm Twenty five milimetre to forty milimetre) nominal bore including carriage of materials within all leads and lifts :-

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm (Fifteen milimetre) nominal bore including carriage of materials within all leads and lifts :-

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm (Fifteen milimetre) nominal dia including carriage of materials within all leads and lifts :-

Pariksha Chauhan