SPL REPAIR TO MT TECH STORE P-2-5-7, FOL STORE P-2-5-8 and BLDG NO P-2-5-11 AND P-2-12 OF 20 MTN DIV CAMP UNDER GE NORTH BINNAGURI

Amount

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

Dismantling of framed timber scantling 40 sq cm and over in section in any position complete all as specified and as directed.

Supply and fix for Rolled mild steel as in Roof trusses ( framed ), trussed, purlins, crane gantries rails, rails and fastenings and heavy bracket framing ( Beam, tee,angle,channel or flat sections ) including distance pieces, cleats etc. conforming to Fe-290 ( Gde E-165), complete all as specified and as directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in as in ridges, valley, eaves, etc with self tapping screws as specified.

S & F 20 mm thick 2nd class hardwood boarding both side planed and edges tongued and grooved or rebated and fixed with nails in any situation in eaves board complete all as specified and as directed.

Dismantling of wall and ceiling board (Fibre,pulp,insulation etc.) or insulation board /slab/blankets any thickness including cover fillet complete all as specified and as directed.

S&F 4mm thick 'E' classic designer board false ceiling with powder coated GI snap grid frame work of grid size 600 x 600 mm complete all as specified and directed including all necessary drilling and necessary arrangement to fix items as under :- (a) 27x27x0.55 mm thick GI angle powder coated duly plugged @ 600mm center to center alongwith perimeter of wall. (b) 25x25x0.55 mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders (n.exe 1.2 mtr length) with adjustable clamps and dash true fasteners plugging in RCC slab/wooden truss/A.I Runner of slopped roof placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick AC "E" Classic designer board of approved texture and finished complete. Note :- The complete ceiling work shall be done as per manufactures instruction and as directed.

Taking down cement plaster on wall of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Supply only Liquid water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed

Demolition of brick work built in cement mortar and removing from site,complete all as specified and as directed

Material & Labour for brick work with fly ash brick, straight or curved on plan exc 6 m mean radius built in CM 1:6 to any radius ,complete all as specified and as directed

M&L for applying average 15 mm thick plaster in two coats (10+5mm) with ready-mix pre-packed proportioned dry mix mortar, blended with PP fibres, mixed with liquid water proofing compound on top layer on fair faces of brick wall or concrete surfaces additives on external surfaces including transporting of material, mixing, curing, scaffolding etc finished even and fair complete all as specified and as directed. Note : Liquid water proofing compound will be measured and paid separately as supply only.

M&L 15 mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface finished even & smooth (without using extra cement) complete all as specified and directed.

Material and labour for glazed ceramic coloured / digital printed of size 450x350 mm x 7 mm thick ) as in vertical surfaces of walls such as skirting/dado / riser to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed. (Note:- Screed bed shall also deemed to be included in the quoted rate by the contractor ).

M&L for preparation of newly plastered wall, chajja/facia,chequered tiles,interlocking tiles, kerb stones etc surfaces and applying two coats of weather coat exterior paint as per manufacturer's instruction etc complete all as specified and as directed

M&L for complete removal of existing treated surfaces of wall including cornices, pilaster and other wall feature etc by washing rubbing down and stopping and applying two coats of weather coat exterior paint as per manufacture instruction etc, complete all as specified and as directed

M & L for preparation of old treated surface of wall by brooming down or steel wire brushing; scrapping down smoke root, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash/ colour wash on old decorated surfaces of wall including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls of any description and applying three coats of white wash/ colour wash including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and directed.

M&L for preparation of new wooden surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed .

M&L for preparation of new or previously untreated steel surfaces any description over 10 Cm in width or girth not otherwise described and applying two coats of synthetic enamel paint all as specified and as directed.

M&L for preparation of old painting to steel surfaces of any description not otherwise described, over 10 Cm width or girth and applying one coat of synthetic enamel paint on the same complete all as specified and as directed.

Demolition of RCC as in slab beam lintels, shelves chajjas or facia, reinforcement cut as required to facilitate demolition and making the surface even and smooth alongwith painting work etc complete all as specified and directed.

M&L RCC M25(Design Mix) as in slab supported on walls, beam, columns in floor, roof, shelves complete all as specified and as directed.

M&L for Form work to sides and soffits of beams complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with including mild steel wire9annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and as directed.

All as per item No. 27 above but 6 to 08 mm dia as in stirrups

S&F mild steel Framed work as in doors or gates of angle or steel ladders,other section Fe-410-W(Gde-E-250)Quality-B with gusset plates, rails, braces, Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or hanging also fastening and fixing complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness as in floors, apron etc laid dry or, bedded and pointed in any mortar complete all as directed.

M&L for Kota stone slab as in flooring, 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 20 mm thick plaster as screed bed in CM 1:6 complete all as specified.( Note:Screed bed shall not be measured and paid separately).

Demolition of cement concrete (un-reinforced ) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C-2 with using 40mm graded stone aggregates as in plinth protection laid in panels and finished even and fair with out using extra cement including necessary form work complete all as specified and as directed. Note: Joints 12mm wide joints to full depth of PCC shall be provided at every 3 meters interval and at every change of direction and shall be filled with mixture of bitumen and sand in 1:3 by weight. Cost of provision shall be deemed to be included in quoted rate of this item.

M&L for 75mm thick PCC (1:4:8) type D-2 with using 40mm graded stone aggregates as in sub base finished the concrete surfaces even and smooth without using extra cement, all complete as specified and as directed.

Material and labour for 80 mm thick coloured rubber moulded machine pressed precast concrete interlocking paver block chemically treated any shape , size and colour confirming to IS 15658-2006 of M-40 Grade with grey cement and pigment over and including 40 mm thick sand cushion spread and laid leveled in layers complete all as specified.

M&L for PCC machine pressed precast apexstone, kerb stone, or similar articles of PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) , set and jointed and pointed in cement mortar (1:4) finished even & smooth using extra cement complete all as specified.

S&F factory made pressed steel windows of standard size as shown on drg No. CESZ/2018/TD-07, Sheet 1/3 to 2/3 and section with double shutter i.e glazed & wire gauged shutter including all fittings and fixture like MS hold fast, box hinges, handles, MS tower bolts, stoppers, MS guard bar/grill etc complete including one shop coat of anti corrosive zinc chrome primer including taking down of old existing one complete all as specified and as directed. Notes:- (a) Rate quoted shall be deemed to be including of all fittings fixtures . (b) Glass, wire mesh and painting shall be measured and paid separately under relevant items of this schedule. (c) PCC (1:3:6) type C1 to be filled in chowkats frame and paid under relevant item of this schedule complete all as specified.

S&F for steel ventilators with top hung shutter as shown on drg No. CESZ/2018/TD-07, Sheet 1/3 to 2/3 including hinges, steel peg stay complete all as specified including taking down old steel ventilators complete all as specified.

M&L for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as directed.

M&L for 3mm thick Figured glass, pin head type and glazing with oil putty in square n. exc. 0.5 sqm in each pane jointed with oil putty complete all as specified and as directed.

S&F of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Taking down PVC soil pipe with fittings from wall, trenches of any description including fittings , complete all as specified and directed.

S & F 200mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with necessary clamps etc complete all as specified and as directed.

S & F 200 mm bore PVC (SWR) bends/Tee of any radius,complete all as specified and as directed.

M&L for providing plain cement concrete type B0 1:2:4 with using 12.5mm graded stone aggregates in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. Note:- Reinforcement if any used in subject item shall be measured and paid separately.

INTERNAL ELECTRIFICATION Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

M&L for point wiring with 1.5 sqmm single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI Marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI Marked) with proper colour coding as earth continuity conductor connected to common earth dolly, modular sheet steel sunken terminal box of appropriate size suitable for modular switch/ fittings concealed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sunken boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles all as specified and as directed for the following :- (a) One light point controlled by one way switch 5/6 amps.

All as per item No 47 above but One ceiling fan/Exhaust fan point controlled by one way switch 5/6 amps.

All as per item No 47 above but One socket out let 5/6 amps point on the independent board

All as per item No 47 above but One socket out let 5/6 amps point on the same board

All as per item No 47 above but wiring with 2.5 sq mm single core multistranded copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed

M&L for point wiring with 1.5 sqmm single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including stove enameled steel conduit and conduit accessories (ISI Marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI Marked) with proper colour coding as earth continuity conductor connected to common earth dolly, modular sheet steel sunken terminal box of appropriate size suitable for flame proof switch/ fittings concealed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sunken boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles all as specified and as directed for the following :- (a) One light point controlled by one way switch 5/6 amps.

S&F of Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of Modular switch, single pole, one way, 16 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of Modular shuttered Socket outlet 5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and as directed.

S&F of Modular shuttered Socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts, (ISI marked) complete all as specified and as directed.

S&F of stepped type modular electronic fan regulator 120 watt 2 module suitable for 1200/1400 mm sweep energy saving fans,ISI marked complete all as specified and directed.

S & F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed.

S & F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and directed.

S&F LED white glass Lamp 1x9 Watt 230V Base-22 complete all as specified and directed.

S&F in ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.

Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.

Supply and Fixing of Flameproof cum Waterproof LED Bulk Head light fitting of 15W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.

S&F class I, LED light 1X20 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified.

S & F Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete including removal of old unsv fitting complete all as specified and as directed.

Taking down carefully Ceiling fan from its original position and refixing / hanging after B/R plaster work complete all as specified and directed.

M&L painting of ceiling fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc, all as specified and as directed.

Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, including taking down old unsv aluminium submain wiring all as specified and as directed. NOTE : Two runs of 6 sqmm conductor for main and one run of 6 sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables wit MCBs or bus bar shall be done through appropriate size brass/ copper thimbles

Material and labour for concealed sub-main wiring two runs of 10 sqmm conductor for main and one run of 10 sqmm conductor as earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, including taking down old unsv aluminium submain wiring all as specified and as directed. NOTE : Two runs of 10 sqmm conductor for main and one run of 10 sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables wit MCBs or bus bar shall be done through appropriate size brass/ copper thimbles

S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, earth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface including taking down old existing one complete all as specified and as directed.

S&F MCB, Triple pole & neutral 63 amps, 240 volts, ‘C’ curve, 10KA including taking down old unsv one complete all as specified and as directed.

S&F MCB, Single pole & neutral, 32 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unsv one as specified as directed.

S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unsv one as specified and as directed.

Material and labour for earthing complete with galvanized steel plate electrodes of size600x600x6mm thick buried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised wire 4.00 mm earth lead by means of nuts, bolts, checknuts and washers including 15 mm bore galvanized iron pipe, medium grade for protection of earth lead upto the length of 7.5 meter towards test terminal and 20 mm bore galvanized iron pipe, medium grade for watering, and providing of charcoal and common salt in alternate layers, including necessary earth work in any type of soil and including PCC pit in PCC 1:2:4 with provision of wire mesh and funnel, complete all as shown in electrical plate No 3 of SSR Part- I including testing on completion including taking down old unsv one complete all as directed and as specified.

Taking out old unserviceable cable of any size carefully from trenches after disconnecting electric connection, GI pipe protection, with and including separating serviceable bricks & set aside and removing un-serviceable bricks from site complete all as specified and as directed. Note : The Excavation and earth work shall be measured and paid separately under relevant item of Schedule.

Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated PVC bedded, galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 50 sqmm 3.5 core with and including all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. (NOTE: Earthwork & Excavation, GI pipe, bricks for protection etc shall be measured and paid separately under relevant items of this schedule 'A').

Excavation in trenches in soft/loose soil not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out for taking up / laying under ground electric cable complete all as specified and as directed.

Returning, filling in, including spreading leveling watering and well ramming in layers not exceeding 25 cms in depth complete all as specified and as directed.

Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.

Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed.

Supply and laying flyash bricks of old size for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.

M & L for horizontal boring across the existing road without disturbing the road surface for inserting 50mm bore GI pipe complete all as specified and as directed. Note :- (i) Removal of surplus soil shall be deemed to be include in the unit Rate. (ii) GI pipe will be measured and paid separately under relevant item of Sch 'A'.

M&L for 50 mm bore steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified and as directed.

Supply and fixing of moulded case circuit breaker (MCCB) four pole Adjustable type 415 volt, 50 Cycles, 200 Amps of breaking capacity 36 KA after and including taking down / dismantling of old existing unserviceable one complete all as specified and as directed.

SHRI MRITYUNJOY KAR (BID ID -3367435)

ROZI KHAN (BID ID -3365661)

SHRI MANOIRANJAN BISWAS (BID ID -3365490)

SHRI PRADEEP PARIK (BID ID -3365960)

SHRI SATPAL SINGH (BID ID -3372334)

M/s. RAMPHAL GARG (BID ID -3367755)

M/S SHYAM ENTERPRISE (BID ID -3369278)