WBIW/AE/PMED/e-NIT-01/26-27

Supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg)

Labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,(tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per direction of Engr-in-charge (cost is excluding the cost of any types of filling materials)

Dumping in position earth / sand filled gunny / poly bags (capacity 50kg) within a lead of 30 metre inclusive of all lifts

Placing / laying, stone / brick aggregates filled gunny / poly bags on the slope of the bank of the river / sea or the slope of the embankment or in the river bed with all leads etc. complete.

Bailing out water by pump including all leads and lifts and including making all arrangements for disposal, where continuous flow or seepage of water is encountered and rating of pumps and hours of operation is specifically ascertained as per direction of the Engineer-in-charge.

Earthwork in excavation in the canals / drainage channels / borrow pits /River bed / slope of bank as noted below as per designed section &throwing the spoils in layers of 25 cm. for making banks as per profile or to deposit the same in any other place within an initial lead of 30 metre and initial lift of 1.5 metre including breaking clods, rough dressing etc. complete as per direction of the Engineer-in-charge. (a) Ordinary soil / local soil / soil mixed with moorum or kankar / silt, dry or moist / slushy silt / sticky soil.

Taking out wind-tie from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within the compound and stacking.

Fixing old wind-tie with new fittings including painting.

Taking out old existing unserviceable damaged gate shutter of canal/river completely after disengaging from hoisting system completelyfor installation of new gate shutter. The work includes cutting of gates into suitable pieces by gas cutting,removing the same by mechanical means or suitable crane, stacking all the pieces at the suitable placeor as directed by the Engineer in charge up to a lead of 1000m.The cost includes cost of manpower employed for dismantling andcost of consumables like oxygen, acetylene gas, welding rod, hire charges of machineries, like chain pulley block, gas set, grinding machine,welding set,tools&tackles,scaffolding and safety equipment’s etc. including carriage loading & unloading. The cost ofcomplete dismantling of hoisting system & cost of old unserviceable materials handed over to departmental go down including loading & unloading will be provided extra.a)Gateshuteersizeupto4.00 sq.m

Fabrication , Supply, erection and commissioning of new Slide type vertical lift regulator service gates of Canal/River as per IS: 5620 - 2000/Latest Revision consisting of skin plate, vertical and horizantal grider, stiffener etc. made of MS material consisting of angle , channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries , Manpower, Cutting, ligning, drilling, Welding, Finishing, Consumables, Carriages and all overheads with all leads and lifts complete as per specification (without painting). i.) Width of Gate shuteer size upto 2 metre.