PAINTING, GRASS CUTTING AND JUNGLE JIM RUNWAY / TAXI TRACK AT AF STATION JAMNAGAR

Deployment of T&P and labour for cutting and removing the grasses / vegetation growth in the surrounding area of runway, taxi track and dispersals by using tractor equipped with jungle jim and disposing off all the rubbish to distance exc 250 meter but not exc 500 meter complete all as specified and directed by Engineer-in-Charge. Note : Considering the working hours contractor will deploy minimum 02 Nos tractor equipped with jungle jim of each working days.

Deployment of JCB for levelling of shoulder/overrun that there are no ditched, debris etc of runway,taxitracks and airfield area for making uniform ground with desired slope complete all as specified and directed by engineer in charge.

M&L for preparation of old painted surface of concrete pavement / black bituminous pavements / plastered surfaces etc over 10 cm width or girth by brooming down or steel wire brushing, scraping down smoke soot, mouls, moss and efflorescent salts and treating oil and greasy spots and applying Coat of synthetic enamel paint of any tints and any colour as approved in lines, dashes, arrows, letters etc using runway/ road marking machine all as specified and directed by Engineer In charge. Make: APCOLITE IS manufactured by Asian Paints or equivalent of make Berger paints Pvt Ltd / Nerolac.

All as per item No 4 above including removal of existing paint but width / girth not exceeding 10 cm.

M&L for preparation of old painted surface of concrete pavement / black bituminous pavements / plastered surfaces etc over 10 cm width or girth by brooming down or steel wire brushing, scrapping by mechanical mean ,scraping down smoke soot, mouls, moss and efflorescent salts and treating oil and greasy spots and applying Coat of water based paint of any tint and colour as approved in lines, dashes, arrows, letters etc using runway/ road marking machine all as specified and directed by Engr-in-Charge Make:- Apcotrac manufactured by Asian paints or equivalent in Berger or Jenson & Nicholson paints Pvt Ltd

All as per item No 6 above including removal of existing paint but width / girth not exceeding 10 cm.

Cleaning of PCC drain not exceeding 1.5 metre deep by removing of deposited soft / loose soil and other foreign materials averaging 30 cm deep and removal of excavated material to a distance exc 250 m but n.exc 500 m complete all as specified and directed by Engineer-in-charge Note:- width of bottom of drain multiplied by the length of drain cleaned shall be measured for payment.

Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and directed by engineer in charge.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed by Engg-in-Charge.

M & L for precast PCC solid block masonry 1:3:6(20 mm graded aggregate) (Type B1) exc 10 cm width and set inCM (1:6) complete all as specified and directed by Engg-in-Charge.

M & L for rendering 15 mm thick on concrete surfaces/ block surface in cement mortar (1:6) finished even and smooth without using extra cement for surfaces of Area Drain complete all as specified and directed by Engr-in-Charge..

M & L for PCC (1:2:4) Type B1 (using 20 mm graded stone aggregate ) in coping, including necessary form work finished fair and even surface without using extra cement including weathering slightly rounded or chamfered angles and throating complete all as specified and directed by Engg-in-Charge.

Demolition of cement concrete in ground floor and paving n exc 15 cm thickness and removing material to a distance 100 meter or under complete all as specified and directed by engineer in charge.

M&L for PCC in surface channels and drains type D2 (1:4:8) using 40 mm graded stone aggregate complete all as specified and directed by Engg-in-Charge.

M & L for removing vegetation, grass cutting and site clearance in soft / loose soil complete all as specified and directed by engineer in charge.

Please Enable Macros to View BoQ information