Site Survey, Designing, Engineering, Procurement, Supply, Loading, Transportation, Unloading, Insurance, Delivery at Site, Handling, Storage, Installation, Testing, Commissioning Including Documentation of All Items/Material required to complete works for Turnkey Based Contract For Conversion of Existing LT Line Network Including Consumer Service Lines Into Under Ground Cable Network With Ring Main System at Veraval Town Subdivision of Junagadh Circle Under PGVCL with GIS Mapping / Geo Urja Mapping (Developed by GUVNL) and Asset Tagging under SI Scheme (Package-56)

Conversion of Over Head to Underground Network

Veraval Town Sub Division of Veraval Division of Junagadh Circle

Particulars of Item Grand Total in Rs.

Particulars of Item Grand Total in Rs.

SCHEDULE-B1: CONVERSION OF EXISTING OVERHEAD ELECTRICAL HT

NETWORK IN TO UNDERGROUND CABLE NETWORK

a FOR SUPPLY PART

b FOR ERECTION PART

SCHEDULE-B2: CONVERSION OF EXISTING OVERHEAD ELECTRICAL LT

NETWORK IN TO UNDERGROUND CABLE NETWORK

a FOR SUPPLY PART

b FOR ERECTION PART

A TOTAL AMOUNT (WITHOUT GST)

A TOTAL AMOUNT (WITHOUT GST)

3 BIDDER'S OFFER ( + / - ) IN % 0.00%

4 BIDDER'S OFFER ( + / - ) IN RUPEES

B OFFERED TOTAL AMOUNT FOR SUPPLY AND ERECTION (WITHOUT GST)

B OFFERED TOTAL AMOUNT FOR SUPPLY AND ERECTION (WITHOUT GST)

5 GST @ 18% ON "B"

C GRAND TOTAL (WITH GST)

C GRAND TOTAL (WITH GST)

Date Signature of Bidder Stamp

SCHEDULE-B: CONVERSION OF OVERHEAD TO UNDERGROUND ELECTRICAL NETWORK

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

SCHEDULE-B2: CONVERSION OF OVERHEAD TO UNDERGROUND LT ELECTRICAL NETWORK

Providing & erecting XLPE(IS:7098) (I)-88 ISI marked multistrand

Aluminium conductor armoured cable ,sand for 1.1 kV to be laid on pole or

in existing cable trence/pipe at road crossing of following size of cables.

1 Work carried out up to consumer premises with meter shifting, and provide

load side cable as per site conditions and as per EIC. For consumer

premises DWC pipe should be provieded(With Excavation, back filling and

sand as per technical specification)

LT CABLE TERMINATION: Cable termination on FSP,LT Distribution

Transformer Box,MSP/SFU /Busbar etc of pole mounted transformer of LT

cable grade as specified below including cutting,stripping of

cable,insulations,providing compression type terminals,suitable cable

glands,crimping lugs with necessary connections.Work carried out up to

consumer premises with meter shifting, and provide load side cable as per

site conditions and as per EIC. For consumer premises DWC pipe should

3 Lying of all types of cable in trench(without Excavation) Mtrs. 121398.00 173 20941155

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

4 Lying of cable on pole Mtrs. 3071.70 44 134233.29

5 Lying of the cable in the Pipe(Without Excavation) 1213.98 58 69803.85

6 Drilling work in Road Crossing through push through Mtrs. 15358.50 569 8742826.125

Drilling work in Road/ASPH/RCC /Hard Rock Etc(Excavation with back

filling as per the specification of cable lying)

8 Supply, intstallation of the DWC pipe(Without Excavation)

Lt cable saddling works: Direct cable saddleing with wall and etc for this

work GI type saddle and nail shall be used.

Supply, Installation, Testing, Commissioning of Half Round pipe(1000mm

Length, 4 inch dia, 1 inch thick)

PRE BONDING TAP: For laying on trench after laying cable on trech to

11 provide indication cable route below land surface in underground trench to Mtrs. 245736.00 17 4238946 245736.00 6 1412982

protect cable for mechnical injuries.

CABLE TERMINAL FERRULS: The PVC Cable terminal ferruls for

identification of phase sequence and feeder/PSS/FSP name of HT/LT

12 cables shall be provided at every termination of all cables stating detail as Nos 24936.00 28 688233.6 24936.00 9 229411.2

under. HT Cable :Feeder name/Phase(R/Y/B) LT Cable : TC/FSP

name/Phase(R/Y/B/N)

CABLE TAG: The PVC tag for identification of feeder/PSS/FSP/RMU

13 name of HT/LT cables shall be provided at every 30 MTR Nos. 40466.00 28 1116861.6 40466.00 9 372287.2

HT Feeder: Substation/Feeder LT

Feeder : PSS/Transformer/FSP

EARTHING PIT : Supplying & erecting earth pit of minimum bore dia.

mm size approved make safe Earthing Electrode consisting Pipe in pipe

Technology as per IS 3043-1987 made of corrosion free G.I. Pipes having

Outer pipe dia of 50 mm having 80-200 Micron galvanising connections,

14 terminal dia of 12 mm with constant ohmic value surrounded by highly Nos. 6234.00 7475 46599150 6234.00 1150 7169100

conductive compound with high charge dissipation with civil works of

earthing chamber. For Electrical installation covering Transformer

neutrals,HT & LT switchgears for independent earthing in normal soil,

Length of Pipe 3 mtrs.Backfilling compound 2 bags of 25 Kg each.

Supply installation & commissioning of earthing conductor 38 x 3 G.I. strip

for pole mounted transformer and upto FSP,RMU,MSP,SFU, Busbar Etc as

well as connection to be made to the earth pit. Rates inclusive of hot dipped

Obtaining statutory approval from Electrical Inspector for installation

17 DISMENTALLING:

Dismentallling RCC/Rail pole with cross arm,insulators,hardwares,stay,

a etc.and return it to discom store.While dismentalling utmost care shall be Nos. 3081.00 155 478325.25

taken so that the material so that the same can be reused by discom.

Dismentalling of AAAC/ACSR/ABC/ Earth wire any size of conductor & line

b material & after making coil and stacking the same at discom store.Routte Km. 123.07 2300 283061

Dismentalling of any type of service connection from the site and material

return to DISCOM store as per directive of EIC

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

FSP (FUSE SECTION PILLER): 4 Way

Supplying and erecting 120x100x40 cms. Fuse section pillar fabricated from

4 mm Thermosetting Plastic ( moulded in a single piece ) i.e Glass

Reinforced Polyester sheet Moulding Compound (SMC ) or metal body(As

per Specification and drawings) with cable clamps to be burried in ground

to have appropriate erection on look unifrom unit erected with cement

concrete foundation and 45 cms high brick masonry internal supported on

both side with intrnal and outer side locking arrangement with lock and keys

in duplicate .Incoming switchgear SFU of TPN and outgoing HRC SMC

fuse base and knife type links 32 Amp to 630 Amp capacity fuse base

fitted on 630 Amp current capacity copper Busbar with RYB colour coding

and insulated strip with all internal connections and entry for incomming up

to 1 core 300 sq mm 4 nos and outgoing 3 nos. 31/2 core cables of

suitable sizes. (As per Technical specification of FSP ) (Erection shall be

carried out as per approved drawing and site condition) (SFU Amp Capcity

FSP (FUSE SECTION PILLER): 6 Way

Supplying and erecting 120x100x40 cms.Fuse section pillar fabricated from

4 mm Thermosetting Plastic ( moulded in a single piece ) i.e Glass

Reinforced Polyester sheet Moulding Compound (SMC ) or metal body(As

per Specification and drawings) with cable clamps to be burried in ground to

have appropriate erection on look unifrom unit erected with cement

concrete foundation and 45 cms high brick masonry internal supported on

both side with intrnal and outer side locking arrangement with lock and keys

in duplicate .Incoming switchgear SFU of TPN and outgoing HRC SMC

fuse base and knife type links 32 Amp to 630 Amp capacity fuse base

fitted on 630 Amp current capacity copper Busbar with RYB colour coding

and insulated strip with all internal connections and entry for incomming

core 300 sq mm 4 nos and outgoing 5 nos. 31/2 core cables of suitable

sizes. (As per Technical specification of FSP ) (Erection shall be carried

out as per approved drawing and site condition)(SFU Amp Capcity is as

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

MSP(Mini Section Piller) : 4 Way

Supplying and erecting 120x100x40 cms. Mini section pillar fabricated

from 4 mm thick Thermosetting Plastic(moulded in a single piece) i.e.

Glass Reinforced Polyester Sheet Moulding Compound (SMC) or

Metal Body Type Enclouser(As per Specification) with cable clamps

to be burried in ground to have appropriate erection on look uniform

unit erected with cement concrete foundation and 45 cms high brick

masonary internal supported on both side with internal and outer side

locking arrangement with lock and keys in duplicate. Incoming HRC

SMC fuse base and kinfe type links 32 Amp to 250 Amp. capacity,

fuse base fitted on 250 Amp. current capacity copper Busbar with

RYB colour coding and insulated strip with all internal connections

and entry for incoming up to 3.5 Core 300 Sq.mm 1 Nos. and

outgoing 3 nos. 3.5 core cables of suitable sizes.( As per Technical

specification of MSP)

MSP(Mini Section Piller) : 6 Way

Supplying and erecting 120x100x40 cms. Mini section pillar fabricated

from 4 mm thick Thermosetting Plastic(moulded in a single piece) i.e.

Glass Reinforced Polyester Sheet Moulding Compound (SMC) or

Metal Body Type Enclouser(As per Specification) with cable clamps

to be burried in ground to have appropriate erection on look uniform

unit erected with cement concrete foundation and 45 cms high brick

masonary internal supported on both side with internal and outer side

locking arrangement with lock and keys in duplicate. Incoming HRC

SMC fuse base and kinfe type links 32 Amp to 250 Amp. capacity,

fuse base fitted on 250 Amp. current capacity copper Busbar with

RYB colour coding and insulated strip with all internal connections

and entry for incoming up to 3.5 Core 300 Sq.mm 1 Nos. and

outgoing 5 nos. 3.5 core cables of suitable sizes.( As per Technical

specification of MSP)

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

MSP(Mini Section Piller) : 8 Way

Supplying and erecting 120x100x40 cms. Mini section pillar fabricated

from 4 mm thick Thermosetting Plastic(moulded in a single piece) i.e.

Glass Reinforced Polyester Sheet Moulding Compound (SMC) with

cable clamps to be burried in ground to have appropriate erection on

look uniform unit erected with cement concrete foundation and

cms high brick masonary internal supported on both side with internal

iii and outer side locking arrangement with lock and keys in duplicate.

Incoming HRC SMC fuse base and kinfe type links 32 Amp to

Amp. capacity, fuse base fitted on 250 Amp. current capacity copper

Busbar with RYB colour coding and insulated strip with all internal

connections and entry for incoming up to 3.5 Core 300 Sq.mm 1 Nos.

and outgoing 7 nos. 3.5 core cables of suitable sizes.( As per

Technical specification of MSP)

Supply, Instalation, Testing, Commissioning switch fuse unit made by

SMC Box and capacity of 125 A, Mostaly used in flat/Socity area.

20 Installation worked caried out with instruction of EIC. And as per the Nos. 929.00 12087 11228358.5 929.00 1150 1068350

drawing approved by CA- Minimum 16 Nos. of CKT

SFU: Supply, Instalation, Testing, Commissioning switch fuse unit

made by SMC box and capacity of 200 A, Mostaly used in flat area.

21 Installation worked caried out with instruction of EIC. And as per the Nos. 265.00 18400 4876000 265.00 1150 304750

drawing approved by CA - Minimum 16 Nos. Of Circuit

SFU: Supply, Instalation, Testing, Commissioning switch fuse unit

made by SMC box and capacity of 400 A, Mostaly used in flat area.

22 Installation worked caried out with instruction of EIC. And as per the Nos. 133.00 20700 2753100 133.00 1323 175892.5

drawing approved by CA- Minimum 16 Nos. Of Circuit

CABLE ROUTE MARKER: Providing and erecting RCC cable route marker

23 as per drawing duly marked with "DANGER" mark, "discom POWER Nos 2480.40 345.00 855738 2480.40 115.00 285246

CABLE" and arrow of route of cable.

DRAWING: Preparing complete drawing of entire network as well as

individual feeder map showing joints also in AutoCad and providing the

same to PGVCL in AutoCad copy as ell as pdf copy and hard copy in six

sets. The drawing should be geographical indicating all directions

FENCING: FRP Fencing for FSP/MSP/SFU/BUSBAR, post shall be

made out of FRP Pultruded hollow section of size 50x50x5mm.. and

shall be grouted in the ground with c. c. of ratio 1:3:6., Sub frame

provided using hollow FRP section 50x25x5mm or FRP angles

50x50x5 at top and bottom and other accessories for fixing of gates

etc. Rails shall be made out of FRP notch bars of 12mm dia, Pickets

shall be made of flats of size 35x5mm SMC or FRP as per

Paint Pointed Letter 2 inch size(Marking on FSP, MSP, SFU Etc In any

palce.(As per directive of Engineer Incharge) with supply of color

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

27 HRC Fuse and its Fuse base(Spare)

28 Jointing Kit for LT Cable

Total LT-UG (Supply+ Erection) 658065461 118722978