Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.6 LAccepted-AOC H NO 1366 3 GALI NO 6 MATA ROAD NEAR HAPPY MODEL SCHOOL RAJIV NAGAR GURGAON 122 001 HARYANA | GURGAON | GURGAON | HARYANA | 122001 | L1 | Accepted-AOC CA amount | |
| 2 | L2₹25.2 L+₹3.2 L (14.6%)Rejected-Finance VILLAGE POST KORUWA CHAKRATA DEHRADUN | DEHRADUN | DEHRADUN | UTTARAKHAND | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹32.8 L+₹10.8 L (49.2%)Rejected-Finance | L3 | Rejected-Finance Other than L1 |
Tender Value
₹24 L
EMD Value
₹48,000
Closing Date
15 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE P DDN
GE P DDN
PETTY REPAIR TO B R AND E M FOR OTM-MD ACCN FOR DET E WKSP COY ORD COY KALSI aT Est 22 UNDER GEP DEHRADUN.
2023_MES_585445_1
GE/P/DDN/07 OF 22-23
Open Tender
Coal Works
Item Rate
270 days
Kalsi
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE P DDN
₹48,000
Yes
23 May 2023
13 Mar 2023
22 Apr 2023
13 Mar 2023
15 Apr 2023
27 Mar 2023
Amount
Demolition of brick /stone work , built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc including demolition of precast rcc articles and disposal of debris out of MoD land complete all as specified and directed.
M&L Brickwork old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.
M&L Brickwork old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
Demolition of cement concrete or lime concrete (unreinforced) in ground floors and Pavings not exc 15 cm thick (below or above ground level) and removing the debris outside from defence land complete all as specified and directed .
Material and labour for Cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises and removing the debris outside from defence land complete all as specified and directed.
M & L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in floors, to receive surface of tile complete all as specified and directed.
M&L for coloured Glazed ceramic tiles in vertical surface such as dado etc 450mmX 300mmX 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete (required in patches not exc 2 Sqm to be done in daily complaints) all as specified and as directed. Note:-The texture, colour, Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.
Supply and fix joint free non skid coloured Ceramic tiles 08mm to 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete (required in patches not exc 2 Sqm to be done in daily complaints) all as specified and directed. Note :-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.
Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc including necessary scaffolding up to four storeys height of bldgs if required and removing of debris out of MoD land complete all as specified and as directed.
M&L for 15mm thick rendering on other than fair faces of brick/ concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed
M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM 1:4 finished even and fair without using extra cement complete all as specified and directe
M&L for preparing old plastered or unplastered wall surfaces and applying two coat of Liquid Acrylic exterior emulsion Paint (Apex) complete all as specified and directed.
Material and labour for preparation of newly plastered internally surfaces of wall and applying one coat of wall care putty on the surfaces & making the surface absolutely smooth surface and applying two coats of distemper oil emulsion over one coat of cement primer (as per manufacturer's recommendation) finished without any brush marks on the surface in any colour including necessary scaffolding up to four storeys height of bldgs if required ,Shade/colour shall be approved by GE, complete all as specified and directed. Note : All painted areas site shall be cleaned and hand over as earlier without any extra cost to Govt.
Material and labour for complete removal of existing treatment internally surface of wall and applying one coat thick wall care putty on the surfaces and making surface absolutely smooth and applying two coats of distemper oil emulsion over one coat of primer (as per manufacturer’s recommendations) on the surfaces without any brush marks on the surface in any tint including necessary scaffolding up to four storeys height of bldgs if required ,Shade/colour shall be approved by GE, complete all as specified and as directed. Note : All painted areas site shall be cleaned and hand over as earlier without any extra cost to Govt.
Material and labour for preparation of old painted steel and iron surfaces of any description over 10 centimeter width or girth and applying one coat of synthetic enamel paint in any colour finished without brush mark on surface including necessary scaffolding up to four storeys height of bldgs if required, Shade/colour shall be approved by GE, complete all as specified and as directed. Note : All painted areas site shall be cleaned and hand over as earlier without any extra cost to Govt.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer all as specified and directed.
Taking down chowkhats or frames exc 1.50 and n.exc 4 Sqm each (without talking off shutters from the frame) complete all as specified and directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frames) area not exc. 1.5 Sqm each and removing from site.
S&F IInd class hard wood, 35mm thick skeleton shutters open rebated & prepared to receive, glass, gauge etc. (without sash bars), edge of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkhats. Complete all as specified and directed.
S&F 35 mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. ommercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure reated
S&F pressed steel frames 125 x 60 x1.25 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plate including one shop coat of primer and PCC 1:3:6 type C-0 (using 12.5 mm graded crushed stone aggregate) as in back filling of hollow portion of frame for fixing of hold fast complete all as specified and directed
Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed.
Supply and fix in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed.
Supply only 3 mm thick sheet glass ordinary quality and glazing with oil putty wire clips in square n.exc 0.5 sqm in each pane upto tripple story building complete all as specified and directed.
Supply and fix in repair 3mm thick figured glass, pin head type and glazing with oil putty in square n-exc 0.5 sqm in each pane upto tripple story building complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of previously untreated surfaces old wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified.
Supply & fix solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying fixing in opening as per specification & drawing complete all as specified & directed.
Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC, ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing.
Supply and fix stainless steel butt hinges of size 100mm long for fixing of door shutter etc complete all as specified and directed.
Supply and fix in repair Mild steel butt hinges of size 100mm long for fixing of chowkhat including welding and fixing etc complete all as specified and directed.
Supply and fix Aluminum, anodized, barrel tower bolts of extruded section and fixed, length of bolt in 150mm complete all as specified and directed
Supply and fix Aluminum, anodized, barrel tower bolts of extruded section and fixed, length of bolt in 200mm complete all as specified and directed
Supply and fix in repair Aluminum, anodized, barrel tower bolts of extruded section and fixed, length of bolt in 150mm complete all as specified and directed
Supply and fix in repair Aluminum, anodized, barrel tower bolts of extruded section and fixed, length of bolt in 200mm complete all as specified and directed
Supply and fix Aluminum handles, cast type anodized Size of handle in 150mm complete all as specified and directed.
Supply and fix in repair Aluminum handles, cast type, anodized Size of handle in 150mm complete all as specified and directed.
Supply and fix in repair Aluminum handles, cast type, anodized Size of handle in 125mm complete all as specified and directed.
Supply and fix Aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed Length of bolt in 250 mm complete all as specified.
Supply and fix in repair Aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed Length of bolt in 250 mm complete all as specified.
Supplied and fixed 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate including welding to steel frames complete.
Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.
Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.
Supply and fix 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.
Supply and fix 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.
S & F in repair 15 mm bore long body CP Bib taps cast copper alloy fancy type with capstan heads (chromium plated),and cup screwed down , high pressure for iron pipe complete all as specified & directed.
Supply and fix in repair CP stop cock/angle valve cast copper alloy screwed down high pressure ,with crutch or butterfly handle screwed both ends for iron pipe or for union of 15 mm bore complete all as specified & directed
Supplied and fixed in repair stop valves (ISI marked), 15mm dia, cast copper alloy, chromium plated fancy type with long shank and cup(concealed type) screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.
Supply and fix for in repairs Swan neck CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed.
Supply and fix in repairs Brass CP shower rose 125mm size including fixing to steel pipe or union complete all as specified and directed.
Supply and fix in repairs Tubular towel rail, ISI marked 60cm long between flanges , 20mm dia 'D' type Brass Chromium plated incl brackets, fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
Supply and fixing in repair vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and as directed.
Supplied and fixed in repairs 10 ltrs capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with Intel, ball valve, float and handle including brackets ,flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and as directed.
Supplied and fixed in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps etc but including brackets, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed.
Supply and fix in repair 15mm dia 600 mm long PVC connection including brass check nut at both ends screwed both end for iron pipes.
S&F in repair Bib tap15 mm standard of PTMT any colour screwed for iron pipe (Minimum weight 15mm-90gms)
S&F in repair 15 mm Stop valve of PTMT any colour high reassure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms)
S&F in repair15 mm pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-110gms
S&F in repair Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms)
S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm
S&F in repairs cast iron bib taps, 15mm bore screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed
S&F in repair soap dish 160mm (min weight 390 grams) length of stainless steel fixed to wall complete all as specified and directed
S&F in repairs 15mm dia CP Health faucet with flexible pipe not less than 90 cm long fixed to EWC suitable complete all as specified and directed at site
Supply and fixing in repairs looking mirror with PVC moulded frame and hard board back (colour of frame as directed) of size 450mm x 600mm x 6mm thick complete all as specified and directed.
S&F in repair Plastic water closet seat cover, white closed pattern with flat bottom and cover and Brass chromium plated hinging device.
S&F in repair flush pipe of polyethylene of low or high density of PVC, 32mm dia for low level cistern
Dismantling of plain or corrugated, steel sheet any gauge thickness including Nainital or similar pattern roof covering etc complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified incl dismentalling existing sheetcomplete all as specified and directed
Dismantling unframed timber scantling 40 sqcm and over in section,in any position all as specified and directed
M&L IInd class hardwood in scantlings timber fixed,clean sawn all as specified and directed
M&L for 75mm thick plain cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in sub base complete all as specified and as directed. Note: - Finishing surfaces of concrete to be even and rough to receive the topping layer.
M&L for 100mm thick cement concrete type B-2 1:2:4 (using 40 mm graded stone aggregates) as in floors Complete all as specified and directed.
E&M ITEMS
M&L replacement in existing point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade, FRLS-H grade in and drawing through and including suitable size of in rigid PVC conduit as required with accessories such as junction boxes, bends, tees etc with suitable size of sunk type cast iron or pressed steel terminal box 1.2mm thick, duly painted for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover/modular cover with frame, including contineous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS-H grade, green colour, up to common earth and connected to earth dolly including taking down old point wiring any type &size compete all as specified and directed by Eng.-in-charge of the following. (Note: Colour code shall be maintained as per IE rule)
One light/fan/bell point controlled by one, 1-way switch/bell push.
One light point controlled by two 2 -way switches.
One three pin 5 Amp socket on same board with other switches.
One three pin 5 Amp socket on independent board
All as per item No 76.00 above but one 3 pin socket outlet 15 Amp independent, with cable 2.5 Sq mm size, with earth continuity coductor of size 2.5 Sq mm.
M & L Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS-H is PVC insulated sheathed, 1100 Volts grade, single core copper conductor cable, drawing through and including in and including new concealed rigid PVC conduit/ Casing Caping as required with accessories such as junction boxes, bends, tees etc. on surface/recessed. Rate shall be including for taking down old submain wiring and making good disturbed surfaces of walls/floors etc complete all as specified and directed by Engr-in-charge :-
2x4.0 sq. mm + 1x4.0 sq. mm earth wire
2x6.0 sq. mm + 1x6.0 sq. mm earth wire
4x10.0 sq. mm + 1x10.0 sq. mm earth wire
S&F in repairs for the following items complete all as specified & directed :-
Modular switch 1 way 10 A 1 module
Modular bell push, 10 A, 1 module
Modular switch 2 way 10 A 1 module
Modular switch 1 way 16 A 1 module
Modular socket 6 A- 2/3 pin combined 2 module
Modular socket 6/16 A- 2/3 pin combined 2 module
Modular cover plate with frame 1-2 module complete
Modular cover plate with frame 3 module
Modular cover plate with frame 4 module
Modular cover plate with frame 6 module
Modular cover plate with frame 8 module
Modular cover plate with frame 12 module
Modular metal flush box 1-2 module, 1.2 mm thick
Modular metal flush box 3 module, 1.2 mm thick
Modular metal flush box 4 module, 1.2 mm thick
Modular metal flush box 6 module, 1.2 mm thick
Modular metal flush box 8 module, 1.2 mm thick
Modular metal flush box 12 module, 1.2 mm thick
Modular surface mounted plastic box 1-2 module
Modular surface mounted plastic box 3 module
Modular surface mounted plastic box 4 module
Modular surface mounted plastic box 6 module
Modular surface mounted plastic box 8 module
Modular surface mounted plastic box 12 module
Modular blanking plate 1 module
Modular fan regulator , 120 watt - 2 module Note : Make for all Modular fittings shall be Legrand/Crabtree/Havells/MK
Switch piano flush, button type 5 Amp SP 240V AC
Switch piano 2-way flush type 5/6 Amp SP 240V AC
Switch piano flush button type 15 Amps SP 250V AC
Bell push, flush type, 5 amp SP 240 V AC
Socket outlet multipurpose 3 Pin 5 Amp 250V AC
Socket outlet two in one six pin 5 Amp and 15 Amp flush type
S&F fan regulator electronic step type, 100 watt
Ding dong bell AC 230 V single pole
S&F Buzzer bell AC 230 V single pole
Ceiling rose, 3 terminal/PVC/polycarbonate, isolated body 230 V AC.
Capacitor 2.5/3.15 mfd 230 Volts
Switch socket combination outlet 5 A , 5 pin box type
Switch socket combination multipurpouse 2 in 1 , 5/15 A box type
Batten holder/ angle holder AC 230V
Plug top 5 Amps 3 pin
Plug top 15 Amps 3 pin
LED lamp 10W B22 type, AC 230V
LED lamp 7W B22 type, AC 230V
S&F in repairs for the following items complete all as specified & directed :-
MCB SP 6 to 32 Amps, 240V, 10KA, C Curve.
MCB SPN 20 to 32 Amps, 240V, 10KA, C Curve.
MCB SPN 40 to 63 Amps, 240V, 10KA, C Curve.
MCB TPN/FP 63 to 100 A, 415 V, B/C Curve.
S&F in replacement sheet metal enclosure powder coated, DB with double door complete all as specified & directed for the follwing size :-
DB SPN 4 way, 240V with 100 amps rated bus bar
DB SPN 8 way, 240V with 200 amps rated bus bar
DB SPN 12 way, 240V with 200 amps rated bus bar
S&F sheet metal enclosure power coated DB with a two pin and earth plug and socket complete with single pole neutral MCB of 20A, 240Vcomplete all as direted
S&F for DB TPN ,4 way, 415 V 200 amps rated bus bar suitable for incomer MCCB upto 160 Amp and outgoing MCBs SP. (Note :- MCCB and MCBs will be measured and paid under respective item)
Taking down Ceiling/exhaust fan of any make/model and sweep for ovehauling/servicing, cleaning and lubricating movable parts with suitable lubricating oil/grease and painting one coat of synthetic enamel paint of approved quality and colour (spray painted) after preparing the surface throughly and refixing at site at same/different location and connection complete from ceiling rose with new flexible copper cable of suitable size, testing commissioning after completion of the work. Note : The accessories such as rewinding and capacitor will be measured and paid in respective item
M&L for rewinding of exhaust fan of 225/250/300 mm any make/model/sweep including removal of existing burnt winding carefully from slots, cleaning the slots throughly with suitable cleaning agent, applying slot insulation and rewinding with super enamelled copper conductor of same gauge/same number of turns as that of existing and connecting the coil suitable to operate on 230 V, single phase, AC supply, permanent capacitor type, tapping the winding and applying air drying the winding throughly complete all as specified and directed.
S & F in repair Copper cable cord flexible 3 core PVC insulated and overall PVC sheathed of size 2.5 Sqmm for making connection of Gyesers as directed.
S & F in repair Water connection pipe for geyser 450 mm long braided stainless steel suitable for hot & cold water supply with cromium plated brass screwed nuts at both ends with washers.complete all as directed.
S&F for Heating element for geyser 1500/2000 watts round/triangular type
S&F for Geyser indicator in red/green colour neon type 230 volts.
S&F for Thermostat controlled switch for controlling temperature range 30 degree celcius to 70 degree celcius for 25/50 ltrs geyser.complete all as directed.
S&F Bolt 8mmX100mm including nut,washer for hanging geyser.complete all as directed.
S&F in repair LED Tubelight fitting with integral LED driver 4ft 20W,230V,AC.complete all as directed.
S&F for Tube light holder suitable for any tube rod LED type.
S&F in repair LED Tubelight fitting with integral LED driver 2ft 10W,230V,AC.complete all as directed.
Supply and fixing in repair LED luminaire 600 mm x 600 mm, 42 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete, Make-Plutoneo2X2Plr42Wled857s or equivalent in Philips/Crompton.
Supply and fixing in repair round/square shape 12 watt 220 volts AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F in repair LED light fitting 10/9W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
S&F in repair LED decorative wall light luminaires including LED bulb 10W B-22 holder and White/warm white connecting up with three core flexible copper conductor cable of suitable size complete. Make: Philips model Comet or equivalent in crompton/Havells
LED ceiling light Driver Suitable for 6W-36W LED panel light
Attending complaint for no light,neutral brake,short circuit,current leakage, earth leakage etc for married accn and OTM bldgs. (Note- One electrician with one helper should be present 24X7 for attending No light complaint including vehicle and T&P and small peaces of cable if required. this item will be measured only where no item replaced, if any item replaced then it will be measured in respective item only.)
External LT Electric Supply
Excavation in trenches soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out excavated soil for laying of cable and getting out complete all as specified and directed.
Excavation in trenches in hard/ dense soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out excavated soil for laying of cable (For road cutting) complete all as specified and directed.
Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in any type of soil complete all as specified and directed by Engineer-In-Charge.
Removing excavated material soil not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified.
M&L for laying dry clean Sand cushioning and covering of UG cable using crushed metal sand in trenches for cable protection all as specified (Punned thickness shall be measured)
M&L for laying reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm to U/G cable laid dry flat over the cable with width equal to length of the cable and abutting each other with gap between adjacent slab not exceeding 10mm over under ground cable for cable protection in trenches all as specified and directed by Engineer-in-Charge.
Supplying and laying Bricks common burnt clay building bricks, old size sub-class ‘A’ designation 75 in trenches as protection of under ground cable all as specified and directed.
M&L for Plain cement concrete (1:2:4) type B1 using 20mm graded crushed stone aggregate for coping to pole foundation including necessary form work with fair finished surface all as directed.
M&L for Plain Cement concrete (1 : 4 : 8) type D-2 using 40 mm graded crushed stone aggregate for pole foundation, filling and mass concrete all as specified.
S&F for LED Driver suitable for street light 25-70 Watts.
S&F for LED Driver suitable for street light 90-120 Watts.
S & F GI Bracket for security lights made out of medium grade GI Pipe 50mm dia 1.5 mtr long bend to shape as directed, fixed on walls with two Nos MS clamp/saddles as required at site including nuts, bolts and washers complete all as specified and directed.
Supply and fixing in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.all as directed.
Supply and fixing in repair LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.all as directed.
Supply and fixing in repair burrial LED type 20 watt 230 watt volts AC outdoor type with 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver complete all as directed. Make Philips-BBP343 LED1800/WW 18W 20D 100-240V or equi in Crompton/Bajaj/Wipro
S&F in repair fuse box sheet metal enclosure made out of SMC junction box front openable and of size 300 X 250 X 100 mm having bakelite connector suitable for 3 phase and neutral link including MCB SP 6 amps fixed to pole with MS 25X3 mm GI clamps made to shape with required nut bolt washers etc. for street light fittings.complete all as directed
Taking out old unserviceable Service wire and Supply and fix 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable flat or circular complete all as specified for the following size :-
6.0 Sqmm size
10.00 Sqmm size
S&F in repairs for the following items complete all as specified & directed :-
MCCBs 63 A, 415V, 16KA, 4 Pole
MCCBs 100/125 A, 415V, 25KA, 4 Pole
MCCBs 160 A, 415V, 25KA, 4 Pole
MCCBs 250 A, 415V, 36KA, 4 Pole
Supply and fix in replacement on-load changeover switch 415 V, 4 pole, 125 A. Make- Cat pat no IHCNFO0125 of Havells/L&T/C&S
Supply and fix in replacement on-load changeover switch 415 V, 4 pole, 250 A. open execution Make- Cat pat no IHCNFO0250 of Havells/L&T/C&S
Supply and jointing Straight through joint for LT cable PVC/XLPE insulated armoured aluminium conductor of 1100 volts grade complete with jointing kit for the following size. (Make: Raychem/3 M/Denson)
10-16 sqmm 3.5/4 core
25 to 50 Sq mm x 3.5 core
70 to 95 Sq mm x 3.5 core
Supply and jointing indoor/outdoor heat shrinkable type end termination kit for LT cable PVC/XLPE insulated armoured aluminium conductor of 1100 volts grade complete with jointing kit for the following size.( Make: Raychem/3 M/Denson):-
10-16 sqmm 3.5/4 core
25 to 50 Sq mm x 3.5 core
70 to 95 Sq mm x 3.5 core
Supplying and laying (in trenches/duct/fixing to pole/wall or in such similar position) in replacement of existing unserviceable GI tubing medium grade for cable protection of following sizes:-
80 mm dia
50 mm dia
Supply & fix in replacement aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground all as specified and directed.
Supply & fix in replacement galvanised iron strip 32 x 6 mm burried in ground all as specified and directed.
Supply & fix in replacement air termination single pointed aluminium rod 12mm dia and 300mm long all as specified and directed.
Supply & fix in replacement test point terminal block made of gun metal or phosphorous bronze size 75x75x25mm drilled and screwed includind 3 nos 8mm dia 25mm long hex head screw all as specified and directed.
Supply and lay in replacement of UG cable XLPE insulated armoured and PVC sheathed LT 1100 volts grade with aluminium conductor stranded including taking up U/S LT UG cables from trench/poles/wall etc of following sizes :-
10 Sqmm 2 core
10 Sqmm 4 core
16 Sqmm 4 core
25 Sqmm 3.5 core
35 Sqmm 3.5 core
50 Sqmm 3.5 core
95 Sqmm 3.5 core
Supply and fix in repair aluminium cables lugs for LT cables including necessary crimping with crimping tool complete all as specified and directed for the following size:-
Supply and fix in repair aluminium cables sector connectors LT cables including necessary crimping with crimping tool complete all as specified and directed for the following size.
Supply and fix in repair copper lugs for HT cables including necessary crimping with crimping tool for 95 Sqmm complete all as specified and directed
Earthing complete with GI earth electride of size 60cmx60cmx6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level wuith top edge of earth plate at a depth not less than 1.5 metre below normal ground surrounded from all sides by 15cm thick and packed layer of charcoal dust and conmmon salt filling in alternate layers cleaned connected to and including GI earth strip 32 x 6mm size upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected light grade 50mm dia 5 mtr long GI pipe connected to main control board and GI pipe light grade 20mm bore for watering and including funnel wire mesh, RCC pit cover 50mm thick with 10mm dia reinforcement 100mm c/c and PCC chamber pit with pcc 1:2:4 Type C2 (including excavation and earth work disposal of surplus soil to a distance not exceeding 50 metre) and testing after completion complete all as specified and shown on plate No 3 of SSR Part -I 2009
All as per Item No. 132 here in above , but using galvanised iron lead 4.0 sq mm as earthing lead complete all as specified & directed
S&F Anti-climbing device spikes type fabricated out of M.S. bars (round, square and flat) including nuts, bolts, washers and welding in two halves made to shape to suit the cross section of the pole
J P CONSTRUCTION
Unique Associates
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .