SPECIAL REPAIR TO BLDG NO. P-18 CHEERBAGH AND BLDG NO P-242 (COOK HOUSE AND DINNING HALL) OF 3 COY UB AREA SIG REGT UNDER GE DEHRADUN

Amount

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames exc 1.50 sqmn. exc 4.00 Sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each complete all as specified and directed.

Taking down shutters of any description n. exc 1 Sqm each complete all as specified and directed.

S&F 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed.

S&F factory made 100 % solid wood plastic composite (WPC) door frame 75x50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed.

M/L 30 mm thick 2nd class hard wood factory made Glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified in SSR Part I.

Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification & drawing as shown in SSR part II complete all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick [Style] consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying & fixing in frame at site as per specification & drawing as shown in SSR part II, complete all as specified and directed.

S&F in repair WPC board 18-19mm thick, one side laminated, medium density, flat pressed, single layer type or three layer type, BWR grade for Almirah doors, self, kitchen cabinet etc complete all as specified and directed.

S&F factory made steel windows with side hung shutters including box type hinges with MS handles and tower bolts complete with glazing bars dovetailed or welded with one shop coat of primer complete all as specified and directed.

S&F factory made steel windows with side hung shutters including box type hinges with MS handles and tower bolts complete without glazing bars, as fly proof shutters with one shop coat of primer complete all as specified and directed.

Taking down existing projected type hings from the steel window carefully with disturbing frame and S&F 50 mm long mild steel box type hinge weld to steel frame and shutter with welding and making good including touch with paint and with existing surfaces including scaffolding complete all as specified and directed.

S & F Framed work such as grills, gratings , Iron Chowkhats etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming toFe 290. Gde-E-165 complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old sheet complete all as specified and as directed.

S&F butt hinges SS steel, medium weight 100 mm size with fixed complete all as specified and directed.

S&F 150 mm long, solid in one piece stainless steel barrel tower bolts complete all as specified and directed.

S&F 150mm size solid in one piece stainless steel handles, cast D type, fixed in stainless steel screws all as directed complete all as specified and directed.

S&F 125mm size solid in one piece stainless steel handles, cast D type, fixed in stainless steel screws all as directed complete all as specified and directed.

S&F 300mm long MS Helical door spring welded to steel frame or fixed to wooden door frame with screws including roller and roller plate etc complete all as specified and directed.

S&F in repair 300mm long MS Helical door spring to steel chowkhat with same as but fixed to wooden door frame including roller and roller plate etc complete of approved quality complete all as specified and directed.

S&F Hasp and staple 100mm safety type, stainless steel 304 grade with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F floor door stopper of stainless steel double legged and tongue, 304 grade, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.

S & F Continuous (Piano) hinges, mild steel, bright finished or stainless steel 304 grade, width of flaps (When open) 30 mm complete all as specified and directed.

S&F magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F stainless steel sliding door bolts 204 grade, hasp and staple type with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 250mm long complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing fixing new ones complete all as specified and directed.

M & L sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc 0.5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.

S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and directed.

S&F Stainless steel 304 grade wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples with 8% nickle complete all as specified and directed.

S&F in repairs Stainless steel 304 grade wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples with 8% nickle complete all as specified and directed.

M&L for Ist class hardwood beads, straight (any size) for fixing galvanised MS wire cloth, renewed , including mitres etc complete all as specified and directed.

M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair 25 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative finished at both ends complete all as specified and directed as per approved sample complete all as specified and directed.

Demolition of cement concrete ground floor and paving n exc 15cm thick (below or above ground level) and dispose with in the MD land 1.5km complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L 75mm thick PCC 1:3:6 type C-2 as in plinth protection with 6 x 10mm groove in every 3m and filled with bitumen mastic filling, finished even and fair complete all as specified and directed.

M&L for coloured Non Skid Ceramic joint free tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed.

M&L for coloured Non Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 350mm x 250mm x 7mm/ 450x 350 x 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for coloured Non Skid Ceramic joint free tiles 7 to 8mm thick (square/rectangular) as in skirting cut from tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slury and pointed in white or coloured cement to match including screed bed 10mm thick in cm 1:4 complete all as specified and directed.

Demolition of Stone slabs and tiles laid, bedded in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

S&F granite 20mm thick of any type (table rubbed and polished in steps, jambs pillars, window cill, cooking platform and like in cement mortar 1:4 including pointing in white cement complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

M&L 10 mm thick ceiling plaster in CM (1:3) on fair faces of concrete surfaces finished even and smooth without using extra cement including fixing of wire mesh to receive plaster where required complete all as specified and directed.

M & L rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound of cement finished fair faces of brick/concrete surfaces of wall, even and fair without using extra cement. WPC will be measured and paid separately complete all as specified and directed.

M & L rendering 15mm thick in cement mortar 1:6 on fair faces of brick or concrete work even and smooth without using extra cement complete all as specified and directed.

Supply only integral waterproofing compound complete all as specified and directed.

M&L for three coats of white wash on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and directed.

S&F CP brass bib tap 15mm bore screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs CP stop/angle cock fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair CP brass shower rose 15mm dia , 100mm dia complete all as specified and directed.

S&F in repair 08 Litr Dual capacity PVC low level flushing cistern including PVC syphon and float valve with PVC long bend for out let, fixing with WC complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts, of 450 mm long complete all as specified and directed.

S&F rotational moulded polyethylene 500 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polyethylene float three layer external and internal white and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and directed.

Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm including cutting cutting for and pinning in ends of brackets, including Waste fittings, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed.

S&F in repair pillar tap, brass chromium plated high neck, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nut screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair vitreous china squatting pan (Orissa pattern) long pan size 580x440mm white with integral footrest with cast iron spun 600 mm long 'P' trap (SI 3989 1984), set in cement concrete type B-1 (1:2:4) complete (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed.

S&F in repairs Soap dish 6 inches, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Taking down CI/AC/PVC pipes including fittings up to 110mm dia and removing from site complete all as specified and directed.

S&F PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes of 75 mm dia, single socketed fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends of 110 mm dia, any radius complete all as specified and directed.

S&F PVC (SWR) bends of 75 mm dia, any radius complete all as specified and directed.

S&F PVC (SWR) junction single Tee equal or unequal 110 mm dia complete all as specified and directed.

S&F PVC (SWR) junction single Tee equal or unequal 75 mm dia complete all as specified and directed.

PVC (SWR) floor trap, plain with grating including jointed with solvent cement of 75 mm outlet dia complete all as specified and directed.

S&F in repairs 40mm bore heavy duty waste pipe not less than 60cm long with PVC coupler for kitchen sink, WHB, urinal, etc complete all as specified and directed.

S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof complete all as specified and directed.

S&F in repairs for 100mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof complete all as specified and directed.

Cutting holes into or through brick walls built in cement mortar and making good in CM 1:3 or cement cone 1 :2:4 Type B-1 as required exc 150 Sqcm & n.exc 400 Sqcm complete all as specified and directed.

S&F in repair sink coupling 32mm dia PTMT half or full threaded complete all as specified and directed.

S&F in repair CP steel Grating round with steel frame with hinge 100mm dia complete all as specified and directed.

Cutting around the pipe 75/100mm bore waste pipe/soil pipe including taking out plant roots up to any depth in brick masonary and re jointing in pipe joint in appoxy mortar and making good to existing surface complete all as specified and directed. Note:- After the jointing pipe one week to be open for checking of leaking including necessary scaffolding.

M&L for taking down existing roof treatment of felt etc any thickness or description including cleaning all up to roof slab incluing removing spoil form site and M&L for providing roof treatment as per the following steps :- i) Filling cracks of roof slab with approved chemical sealing compound and applying 15mm thick rendering in CM 1:4 over neat cement slurry @ 3.00 Kg/Sqm over cleaned roof surface with use of approved water proofing compound. ii) Applying a coat of cold applied bituminous primer @ 0.30 Kg/Sqm followed by APP modified five layer polymeric membrane 3mm thick, minium weight 3.60 Kg/Sqm reinforced with polyester non-woven fabric (weight not less than 150 gms/Sqm) manufactured by M/s STP Ltd or M/s Texsa India Ltd, laid as per the manufacturers instruction with side over lap of 75mm and end over lap of 100mm and finally finished with super silver shield @ 0.10 Ltr/Sqm.Note : The work of water proofing treatment shall be got executed through manufacturer or authorized applicator only.

M&L for complete removal of existing treatment from wall up to plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper complete all as specified and directed.

S&F in repair plate rack 300mm and size 100 x 80 cm made out of 1.00 mm thick stainless steel complete all as specified and as directed.

S&F in repairs stainless steel kitchen sinks without draining board ISI marked made of stainless steel 1 mm thick, with plugs, washers and wastes, including bedding lime cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

M&L preparation of old decorated surfaces of ceiling (Plastered) by brooming down or sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and directed.

M&L one coat of white wash on prepared surface of ceiling complete all as specified and directed. Note:-White washing shall be carried out using DDL.

M&L for preparation of old surface and applying one coat of white wash on prepared surface of wall complete all as specified and directed. Note:-White washing shall be carried out using DDL.

M&L two coat oil bound distemper over a coat of primer any tint on walls on already prepared surface complete all as specified and directed. Note:-White washing shall be carried out using DDL.

M&L for preparation of internal surface of wall and applying wall putty 1 to 2 mm thick to make the surface smooth complete all as specified and directed.

M&L for preparation of wall and applying wall care putty 1 to 1.5 mm thick to make the surface smooth complete all as specified and directed.

M&L two coat of whether proof exterior emulsion paint on brick/concrete wall surfaces incl primer coat on walls complete all as specified and directed.

M&L for preparation of old painted steel surfaces over 10 cm width/girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of wood over 10 cm width/girth and applying one coat of synthetic enamel paint all as specified in SSR Part I and directed by Engr-in-charge.

Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high Writing bldg No complete all as specified and directed.

M&L 65-70mm for reinforced precast cement concrete 1:1:2 with 1.25mm thick MS sheet painted with bituminous paint around the manhole cover (using 20mm graded stone aggregate) as in landings, cover slabs ( for manholes etc.) vibromatic, articles with plain faces including necessary form work using surface vibrator, complete CA No and date of casting to be engraved on the cover slab by stencil and curing will be done in the water reservoir all as specified and directed. Note:- Reinforcement shall be measured and paid for separately under respective item of schedule 'A'.

S&F TMT MS bar 8 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for Removing /cutting trees vegetation, digging out roots from concrete or brick wall filling holes on building (block of 8 qtrs) wall/roof/cajja/water tank staging area etc and making good with cement mortar 1:2:4 complete all as specified and directed.

M&L for pre-polished pavement coloured chequred tiles glossy finish of size not less than 300 x 300 x 20-22mm thick with anti skid properties laid over and including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in Cement Mortar 1:4 complete all as specified and directed.

M&L for cement concrete in 1:2:4 type B-2 (40 mm graded aggregate ) as in surface channel and drain complete all as specified

M&L for Extra forming fair finished drain or channel 45 cm inner girth in cement concrete using extra cement , including formwork, moulds, mitred/stopped ends etc complete all as specified and directed.

M & L for 20 - 25 mm thick machine cut Kota stone slab as in flooring over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges including 20 mm thick screed bedding layer of CM 1:4 complete all as specified and directed.

M&L for brick work with sub class' B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6. except bricks complete all as specified and directed.

M&L for 15 mm thick cement plaster, Ist coat 10 mm thick in cement mortar 1:6 & IInd coat 5 mm thick in cement mortar 1:4 with including water proofing compound, surface finished even and smooth without using extra cement complete all as specified and directed. Note:- Water proofing compound shall be measured & paid separately.

Supply only liquid water proofing compound @ 0.20 ltr per bags of cement complete all as specified and directed.

M&L for complete removal of existing treatment on ceiling and applying three coats of white wash on ceiling, off sets, pillar etc complete all as specified and directed.

M&L for preparation of newly plastered surface of walls including corners and applying two coats of 100% Premium exterior acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over applying of 1-2 mm thick wall care putty finish wall surface even & smooth all as specified and directed. (Note : The work will be carried out up to triple story building the rate of scaffolding is included for this item also)

M&L for complete removal of existing treatment of walls including corners and applying two coats of 100% Premium exterior acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over applying of 1-2 mm thick wall care putty finish wall surface even & smooth all as specified and directed. (Note : The work will be carried out up to triple story building the rate of scaffolding is included for this item also)

Demolition of reinforced cement concrete, shelves, chajjas, slabs and similar work carefully and matching to adjoining disturbed surfaces all as directed.

M&L for reinforcement cement concrete Type B1 1:2:4 (20 mm graded stone aggregate) like in slabs, shelves, etc complete all as specified and directed.

Form work to shelves and the like including edges, surfaces finished rough complete all as specified and directed.

S&F Mild Steel TMT bar 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L 10mm thick plastering in CM 1:4 on fair faces of brick/concrete surfaces for fixing of tiles on wall, skirting/dado, laying kota stone complete all as specified and directed.

M &L for Glazed Ceramic tiles coloured, of size 300mm x 200mm x 6 to 7mm thick approved 1st quality as in vertical surfaces such as skirting/ dados etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for re fixing with all fittings for 15 mm bore GI tubing complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for re fixing with all fittings for 20 mm bore GI tubing complete all as specified and directed.

S&F of waste pipe of 32mm dia PVC pipe for WHB & kitchen sink complete all as specified and directed.

S&F of pillar tap fancy type 15mm dia cast copper allow with capstan head chromium plated screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair bib tap, fancy type, brass chromium plated, with wall cap, with round headed knob, screwed for 15mm bore iron pipe complete all as specified and directed.

M&L cutting holes in brick wall built in cement mortar exc half brick but n exc one brick for inserting or cement concrete 1:2:4 hold fast etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

S&F MS flat iron 25x3mm thick for hold fast complete all as specified and directed.

S&F of 2nd class hard wood plain, solid , straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 35m thick factory made glazed and skeleton shutter open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads or clearing glass etc, size of members of shutters as specified in SSR part I section 8 clause 8.20 (a) of IInd class hard wood complete all as specified and directed..

M&L 35mm thick 2nd class hard wood factory made plain framed paneled shutters (three panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, all as specified and directed.

S&F of steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

Repairing welding to steel windows including making functional (easy to opening and closing) and replacing the missing damaged parts complete all as specified and directed. Note : Spare parts required for measured and paid separately under respective items and supply only.

Supply only Projecting type steel hinges (for windows) complete all as specified and directed. Not:- The cost of fixing shall be included in the respective item of window.

Supply only Casement stay MS 300 mm long suitable for steel windows including nut, bolts etc complete all as specified and directed. Not:- The cost of fixing shall be included in the respective item of window.

Supply only MS handles for steel windows with necessary notch for closing arrangement to suit the existing windows (Left/Right) complete all as specified and directed. Not:- The cost of fixing shall be included in the respective item of window.

M&L 18/19mm thick pre laminated particle board interior grade pre laminated both sides with decorative choice laminations fixed with screw to timber frame complete all as specified and directed.

S&F 6mm thick teak wood lipping for fixing on edges of pre laminated particle board/block board complete all as specified and directed.

S&F 40mm dia cup board knobs brass polished fixed with screw and washers complete all as specified and directed.

S&F 150mm MS Hasp and staples safety type, stove annealed black including bolt to hinges plate and fixed with screwed complete all as specified and directed.

S&F 200mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100 mm size MS butt hinges medium weight cold rolled fixed/ welded to frame complete all as directed.

S&F 300 mm, mild steel ordinary rat rail rod pattern door springs including roller plate complete all as specified and directed.

S&F 250mm long Aluminium sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed.

M & L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc 0.5 sqm each pane complete all as specified

M&L for complete removal of paint on old decorated surface of wooden surface by paint removers or burning off by blow lamp and cleaning with scrapers any number of coat and applying two coat of synthetic enamel paint on wooden surface over a coat of pink primer exc 10 cm width or girth including preparation of new surfaces complete all as specified and directed.

M&L applying two coats of synthetic enamel paint including preparation of old steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

S&F mild steel, plain, black sheet 1.60 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

Dismantling of existing broken PVC 1000 ltrs water tank complete all as specified and directed.

S & F 1000 Ltrs capacity Rotational moulded, polythene water storage tanks ( cylindrical shape with vertical top closed) hoisted and fixed in position all as specified in SSR part I including Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (minimum weight 15mm-142gms/20mm-210gms/25mm-455gms/40mm-690gms) all as directed.

S&F mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-290 (Gde E-165) complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc. ) sheets in roof coverings complete all as specified and directed.

Taking down carefully existing aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc ( light, fan, socket, or power and switch, socket, regulator, holders, ceiling roses) complete and making good the disturbed surfaces of walls, Floors, ceilings etc to match with existing complete all as specified and directed.

M & L for point wiring complete with PVC insulated and unsheathed, FRLS 1100 volt grade electric cable of size 1.5 sqmm with multi stranded copper conductor single core in and including rigid PVC surface conduit not less than 19 mm dia, clip, complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including MS Box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and one run 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly complete all as specified including lugs required for One light/fan point controlled by one switch, complete all as specified and directed.

All as per item No 150 above but for one 5 pin 5 Amp socket outlet point on same board complete all as specified and directed.

All as per item No 150 above but for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No 150 above but with 4 Sqmm copper conductor cables (multi stranded) PVC insulated FRLS, for one 6 pin 15 Amp socket outlet point on independent board

M&L for Point wiring with1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sinking's for boxes and making good to walls,floors etc complete all as specified and directed by Engr.-in-charge for one light point /exhaust fan controlled by one way switch.

(b) All as per item No 154 above but for one fan point , controlled by one way switch through regulator

(c) All as per item No 154 above but for one bell point , controlled by bell push switch.

(d) All as per item No 154 above but for one three pin 5 Amp socket on same board with other switches

(e) All as per item No 154 above but for one one three pin 5 Amp socket on independent board

(f) All as per item No 154 above but for one light point controlled with switch 2 way complete all as specified.

All as per Item No 154 here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 2.5 Sqmm FRLS copper conductor for continuous earthing complete.

All as per item No 154 above but wiring drawn through concealed PVC Conduit with 4 Sqmm. (nominal area) wire/cable for one 3 Pin 15 amp socket on independent board

As as per item No 154 here-in above but point wiring drawing through exisitng conduit (without socket, elbow, junction box, bell mouth, bend, reducer) Note :- Modular switches boxes and cover plates shall be measured and paid separately

All as per item No 150 but point wiring drawing through exisitng conduit for one 5 pin 5 Amp socket outlet point on same board with independent switch complete all as specified

All as per item No 150 but wiring drawing through exisitng conduit for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No 150 here in before but wiring drawing through exisitng conduit with 4 Sqmm cables for one 6 pin 15 Amp socket outlet point on independent board

S & Fix in repairs for Switch piano flush type single pole one way 230 Volts 6 Amp complete all as specified and directed.

Supply and fixing Switch piano flush type, single pole, one way, 230 Volts 15/16 Amps marked with valid CML No. complete all as specified and directed.

S & F in repair Switch piano flush type single pole two way 230 Volts 6 Amp complete all as specified and directed.

S & Fix in repairs for Socket outlet 3 pin , 230 Volts 5/6 Amps flush type multipurpose 5 pin complete all as specified and directed.

Supply and fix in repairs for Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type IS: 1239-1988 marked with valid CML No complete all as specified and directed.

S&F switch socket combination 5 Amps, 5 pin, 2 in 1 complete all as specified and directed

S&F switch socket combination multipurpose 5 & 15 Amps, 5 pin, 2 in 1 complete all as specified and directed

S & Fix calling bell ding dong type AC 230 Volt single pole complete all as specified and directed.

S & Fix in repairs for bell push flush type 5 Amps 230 Volts single pole complete.

S & F Modular Fan Regulator electronic rotary,0-4 steps step type 100 Watt, 240 Volt 50 Hz hum free 2 module complete all as specified and directed.

S&F switch modular 6 Amps 230 Volts one way switch complete all as specified and directed.

S&F Socket modular 6 Amps AC 230 Volts 2/3 pin combined 2 modular type complete all as specified and as directed

S&F Socket 6A/16 Amps-2/3 pin combined AC 230 Volts modular type complete all as specified and as directed.

S&F Switch modular type AC 230 volts 16 Amps one way complete all as specified & as directed.

S&F GI sunken box with flush metal GI box 1 module suitable for modular switches incl plastering, making good disturbed surfaces of wall, painting to match the existing finishes complete all as directed.

All as per item no 180 here in above but 2 module.

All as per item no 180 here in above but 3 module.

All as per item no 180 here in above but 4 module.

All as per item no 180 here in above but 6 module.

All as per item no 32 here in above but 8 module.

All as per item no 180 here in above but 12 module.

S&F combined cover plate white 1 module suitable for modular switches complete all as specified and directed.

All as per item no 187 here in above but 2 module

All as per item no 187 here in above but 3 module

All as per item no 187 here in above but 4 module

All as per item no 187 here in above but 6 module

All as per item no 187 here in above but 8 module

All as per item no 187 here in above but 12 module.

S&F ceiling rose surface Bakelite 3 terminals of size 65x25mm complete all as specified and directed

S&F lamp holder PVC/polycarbonate type with LED lamp 9/10 watt complete all as specified & directed

S&F in replacement Bulk head luminaire with opal diffuser with and including retrofit LED lamp 10 watts complete all as specified and directed. Make : CG cat LBHP-10-CDL/Philips WT140W LED7S CW PSU S1 PC/Havells ENDURA RUGBYNEO N /Mepro cat no BCL 23 Plain

S&F in replacement mirror light(2 Feet Tube light) decorative compact luminaries with decorative ends caps 9/10 Watt or higher LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make Philips BN 021 LED10S -6500 PSU GR S1 /Havells Cat No ENDURALINEARNEOBS10WLED840SPCWH /CG LCL-07-CDL

Taking down old LED tube light carefully and kept with stores and re-fix the same after wiring complete all as specified and directed.

S&F tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 4000K/6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed. Make: Wipro Cat part No LL20-281-XXX-65AL1/ Philips cat part No BN021C LED20S PSU CWGR S2/Havells Cat No ENDURA LINEARNEOBS20W LED865SPCWH.

S&F Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base. LHFOAJE1TZ1I060 1 N x 9 W LED Lamp/1 N x 7.5 W LED filament lamp complete all as specified and directed. (Test certificate to be submitted)

S&F LED down lighter 2'x2' , 35/36 W. Make Philips Cat No RC383BLED28S-4000PSUODWH PIR complete all as specified and directed. Note:- Test certificate shall be submitted by the contractor.

S&F LED down lighter concealed ceiling light 12W Sky Spot COB (WW) complete all as specified and directed. Note:- Test certificate shall be submitted by the contractor.

S&F LED Strip tube type 50 Mtr Length including necessary connectors, clips holders etc fixed at ceiling/wall/roof complete all as specified and directed.

S&F LED Scenery Light complete all as specified and directed. Note:- Test certificate shall be submitted by the contractor.

Supply and fixing in repair of building security light luminaries with surge protector and photovoltaic/LDR sensor controlled made out of single piece die cast alluminium housing suitable for and including 30 Watt LED lamp type complete, pre-wired including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, buts & washers of min 1.2 Mtr including grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified including taking out old u/s fitting complete all as specified and directed. Note: The unit rate include for painting to bracket with one coat of red oxide paint and two coat of alluminium paint before fixing

S&F street light bracket fabricated with 40 mm dia GI tube med duty with all necessary clamps, screws, washers, nut and bolts and fix with wall and including required wiring from ceiling rose complete all as specified and directed.

S&F flood light fittings. Energy saving environmental friendly, long life, exclusive innovative epoxy powder coated die-cast aluminium housing IP66 flood light with high power LED's as light sources, suitable for high lighting architectural features or retail spaces as 60 watt or higher size LED , Glass cover complete all as specified and directed.

S&F wall mounted fans complete with all accessories ,400 mm . BEE 5 star rated PVC AC single Phase 230 V / 240V 50 Hz of , connector block of fan including fixing of Fan hooks and necessary nuts and bolts complete all as specified and directed.

S&F BLDC Ceiling Fan complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated PVC AC single Phase 230 V / 240V 50 Hz of , complete connecting up ceiling rose to connector block of fan including fabricating and fixing of Fan hooks from ceiling truss/angle iron, required length of down rods (As per site requirement) and necessary nuts and bolts complete all as specified and directed.

S&F heavy duty Exhaust fan exhaust, metallic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1400, Copper winding of sweep 380mm, complete with louvers, shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block including taking down old metallic exhaust fan complete all as specified and directed.

All as per item No 210 here-n-above but Exhaust fans of size 300 mm sweep.

S&F Water heater storage type, electric, capacity 35 litres AC single phase 230/ 240 V o and connecting up including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed.

M&L labour for cutting and fabricating false/POP ceiling for fixing light fitting and making good to disturbed surface including painting to match with exisiting colour complete all as specified and directed.

S&F TPN DB VTPN 4 way 415 Volts, 50 Hz indoor type double door Sheet metal enclosure IP-43 DB's flush mounted with 250 Amp Copper busbar for each phase with two neutral bar & two earth bar and cable ties for cable management including mounting arrangement for DPX3 MCCB 125 Amps four pole 415 volts as incomer including connection terminal strip complete pre wired with suitable size copper conductor. The DB's should hold type test certificate (CPRI) as per IEC 61439-3 complete all as specified and directed.

S&F MCCB 3 Pole 125 Amp, 25KA thermal magnetic complete all as specified and directed.

S & F sheet metal enclosure TPN for DB's when MCB's to be used 4 way with 200 amps bus bar and double door complete all as specified and directed.

S & F sheet metal enclosure SPN for DB's when MCB's to be used 12 way with 200 amps bus bar and double door complete all as specified and directed.

All as per item no 217 here in above but DB' 8 way

All as per item no 217 here in above but DB 4 way

S&F metal clad single pole and neutral enclosure with 2 pin and earth plug and socket complete including 1 single pole MCB 20 Amp 240Volt complete all as specified and directed.

S&F MCB SPN 240 Volt 10 KA 6 to 40 Amp 'C' series conforming to IS complete all as specified & directed.

S&F MCB SP(single pole) 240 volt, 10 KA, 6-40 Amp, 'C' series confirming to IS complete all as specified and directed.

M&L in replacement for sub main wiring with 3 runs (P+N+Earth continuity conductor) of 2.5 Sqmm single core, PVC insulated, unsheathed, multi stranded copper conductor FRLS cable 1100 volts grade recommended colour code ,drawn through and including Surface PVC conduit pipe of medium duty not less than 15 mm dia including necessary PVC conduit specials and connecting all wires with suitable size thimble complete all as specified and directed. Note:-3 runs of PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

All as per item No 223 but sub main wiring drawn through and including 20 mm dia or higher medium duty PVC concealed conduit with 4 Sqmm (nominal area) Cable

All as per item No 223 here in above but wiring with 6 Sqmm cable drawing in & including 25 mm dia or higher medium duty PVC concealed conduit

M&L for earthing complete with GI or steel earth plate electrode 600 x 600x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtrs below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to GI strip 32x6 mm by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of (0.68mm) 8 mesh per liner inch, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I and specified including provision of earth wire protected by 40mm dia medium grade GI pipe and watering pipe shall be 20mm bore medium grade GI pipe, and including all excavation and earth work & connecting the earthing to an earthing test point /transformer neutral/body/ Lt panel etc. and testing on completion, complete all as specified & directed by Engr-in-Charge.

S&F MCB TPN 63 Amps 10 kA, 430 Volt complete all as specified & directed.

S&F ceiling fan hanging hook clamps (for fixing to ceiling fan rod) made with using GI pipe of suitable size as directed and with heavy duty rubber insulator and two Nos nuts and one bolts including split pin complete all as specified and directed.

S&F in repair louvers shutters round or squire made out of GI sheet suitable upto 300 mm dia exhaust fan complete incl taking out old louvers shutter complete all as specified and directed.

S&F modular TV Socket out let with single port complete all as specified and directed.

S&F modular RJ11 Tele Jack double port with shutter port complete all as specified and directed.

Supply, laying & connecting of XLPE, 100 Volt armoured electric LT cable 50 Sqmm 3.5 core 1100 volt XLPE including all necessary connecting materials like lugs, Cable glands, nuts, bolts, washers etc complete all as specified and directed

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 25 Sqmm 4 Core complete all as specified and directed.

Excavation in trenches soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out excavated soil/sand/unsv LT Cable for laying of cable and getting out.

Supply & laying Sand coarse dry as in cushioning of underground electric cable in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable ) and gently punned down to 18cm thickness all complete all as specified and directed. Note :- Only punned down sand thickness 18CM shall be measured and paid.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in hard /loose soil complete all as specified and directed by Engr-In-Charge.

Removing excavated material n. exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point complete all as specified.

Supplying and laying old size bricks, laid flat ie length of brick shall be laid across the cable, common burnt clay building bricks sub class `B' designation 75 complete all as specified and directed and testing on completion complete all as specified and directed.

Cutting existing road/hardstand of any type by using crow bar chisel up to a depth of 30 cm for laying GI pipe including making good the surface by returning filling watering ramming in layers 150 mm thick PCC 1:2:4 over 200 mm thick hard core of broken bricks/stones over returning filling watering ramming in layers not exceeding 25 cm thick complete all as specified and directed.

M&L for GI Tubing Light grade (ISI marked) with all fitting/accessories for protection of cable on pole/wall and under road crossing including clamps, nut bolt etc all as specified and directed of size 50mm dia complete all as specified and directed.

S&F Meter Distribution board made out of Thermoplastic polycarbonate of size 600x600x170 mm (dust proof & weather proof ,Shock proof, rust proof ,corrosion free ,acid & Chemical resistance ,UV resistance , Halogen free & recyclable material) with 230v Ac 50 HZ 3 Wire , Gasket shall be embedded with T-locking arrangement and suitable for mounting of Electronic Meter -04/6 Nos including electrical connection with existing system and sealing properly & taking out u/s broken/rusted box of any size and type complete all as specified and directed.

S&F Temper proof LCD display Digital Energy Meter, single phase, 2 Wire AC, 230V, Cap 10-60A, Push to fixed type Box with marker of qtr nos on EM as complete all as specified and directed.

Removing & Refixing as its existing position or new location the ceiling fan carefully including electric connection complete all as specified & directed

Supply and fix electric water heater, storage type steel body and heating element up to 2 KW of capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. complete all as specified and directed.

Supply and fixing in replacement for Distribution board Vertical type TPN 4 Way double door, suitable for MCCB 100/125 Amps MCCB as incoming and MCBs for outgoing factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection including taking out old u/s complete all as specified and directed. Note:- DB and MCCB/MCB shall be of same make and paid separately

Supply and fixing in replacement for Distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process, The DBs shall be of IP 43 protection complete all as specified and directed. Note:- DB and MCCB/MCB shall be of same make complete all as specified and directed.

Supply and fix in repairs MCCB 100 Amps FP 415 Volts having breaking capacity 16 KA with and incl spreader link kit complete suitable for fixing as incoming in polycarbonate busbar complete all as specified and directed.

AYUSH CONSTRUCTION COMPANY

M/s Pradeep Kumar

ANANYA CONSTRUCTION CO.