J&K

To Be Opened

Works

Civil Works

Renovation of Ganj Ghar Basohli at Ward No.09 Near Chandi Shah Well (Under CDF during the year 2025-26)

Public Works Department

Basohli | Kathua, Jammu And Kashmir

Amount: ₹5.4 LCloses: 29 Apr 2026Closed

Timeline

Published22 Apr 2026
Closed29 Apr 2026
Bid Opening30 Apr 2026

Tender Value

₹5.4 L

EMD Value

₹10,760

Closing Date

29 Apr 2026, 4:00 pmClosed

Tender Inviting Organisation

Name

Er Rajesh Kumar

Address

Executive Engineer PWD R and B Division Basohli

Work Description

Please refer in BOQ

Tender Information

Tender ID

2026_PWDJK_308428_1

Reference Number

e-NIT No. 05 of 2026-27 dated 21-04-2026

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Period of Work

60 days

Location

Basohli

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

2 documents required · 2 mandatory

Fee/PreQual/Technical

RequiredAll documents upload as per NIT , SBD (.pdf)

Finance

RequiredBill of Quantities (.xls)

Fee & Financial Details

Tender Fee Amount

₹600

Tender Fee Payable To

Executive Engineer PWD R and B Division Basohli

EMD Fee Amount

₹10,760

Important Dates

Last Activity

22 Apr 2026

Published

22 Apr 2026

Bid Opening

30 Apr 2026

Download Starts

23 Apr 2026

Download Ends

29 Apr 2026

Submission Starts

23 Apr 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (8 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1 cement:6 coarse sand).
2Extra for brick work with common burnt clay bricks / cement concrete bricks in superstructure above plinth level upto floor five level.
36mm cement plaster to ceiling of mix. 1:3 (1 cement:3 fine sand).
412mm Cement plaster of mix: a) 1 : 6 ( 1 cement : 6 fine sand)
515mm cement plaster on the rough side of single or half brick wall of mix. 1:6 (1 cement: 6 fine sand).
6Providing and laying vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. a) Size of tile 600x600mm.
7Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. a) Size of tile 600x600 mm
8Providing and laying damp proof course 50mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) and curing complete.
9Providing and fixing 35mm panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screw, excluding paneling which will be paid for separately, all complete as per direction of Engineer-in-charge. a) Second class deodar wood.
10Providing and fixing paneling or panelling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for paneled or paneled and glazed shutters 25mm to 40mm thick. a) Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS:3087 marked.

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.26 MB

Work Item Documents

BOQ_999537.xls

BOQ • 0.31 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1 cement:6 coarse sand).
2Extra for brick work with common burnt clay bricks / cement concrete bricks in superstructure above plinth level upto floor five level.
36mm cement plaster to ceiling of mix. 1:3 (1 cement:3 fine sand).
412mm Cement plaster of mix: a) 1 : 6 ( 1 cement : 6 fine sand)
515mm cement plaster on the rough side of single or half brick wall of mix. 1:6 (1 cement: 6 fine sand).
6Providing and laying vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. a) Size of tile 600x600mm.
7Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. a) Size of tile 600x600 mm
8Providing and laying damp proof course 50mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) and curing complete.
9Providing and fixing 35mm panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screw, excluding paneling which will be paid for separately, all complete as per direction of Engineer-in-charge. a) Second class deodar wood.
10Providing and fixing paneling or panelling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for paneled or paneled and glazed shutters 25mm to 40mm thick. a) Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS:3087 marked.

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1 cement:6 coarse sand).

2Extra for brick work with common burnt clay bricks / cement concrete bricks in superstructure above plinth level upto floor five level.

36mm cement plaster to ceiling of mix. 1:3 (1 cement:3 fine sand).

412mm Cement plaster of mix: a) 1 : 6 ( 1 cement : 6 fine sand)

515mm cement plaster on the rough side of single or half brick wall of mix. 1:6 (1 cement: 6 fine sand).

6Providing and laying vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. a) Size of tile 600x600mm.

7Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. a) Size of tile 600x600 mm

8Providing and laying damp proof course 50mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) and curing complete.

9Providing and fixing 35mm panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screw, excluding paneling which will be paid for separately, all complete as per direction of Engineer-in-charge. a) Second class deodar wood.

10Providing and fixing paneling or panelling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for paneled or paneled and glazed shutters 25mm to 40mm thick. a) Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS:3087 marked.