Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 2₹3.4 L+₹8,397.56 (2.55%)Accepted-AOC | 2 | Accepted-AOC society | |
| 2 | 1₹3.3 LRejected-AOC ASHAYIL CHENGARA PATHANAMTHITTA | KOTTAYAM | KERALA | 686001 | 1 | Rejected-AOC society | |
| 3 | 3₹3.7 L+₹39,995.86 (12.1%)Rejected-Finance | 3 | Rejected-Finance 3 |
| Sl No | Description | Qty | Unit | JITHIN VARGHESE L3 | RAJESH A BHASKAR L1 | EDAKULAM LABOUR CONTRACT CO OPERATIVE SOCIETY LIMITED PT 157 L2 |
|---|---|---|---|---|---|---|
| 1.00Building | ||||||
| 1.00 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 262.2 | kg | 166 ₹43,525.7 | 150 ₹39,330.45 Lowest | 156.11 ₹40,932.51 |
| 1.00 | 10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 132.79 | kg | 129.99 ₹17,261.11 | 122 ₹16,200.14 | 121.3 ₹16,107.18 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) | 0.36 | cum | 8,900.14 ₹3,204.05 | 8,091 ₹2,912.76 Lowest | 8,091.04 ₹2,912.77 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 638.81 | kg | 188 ₹1,20,096.28 | 162 ₹1,03,487.22 Lowest | 170.94 ₹1,09,198.18 |
| 1.00 | OD343554/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required. | 94.08 | sqm | 663 ₹62,375.04 | 605 ₹56,918.4 | 603.9 ₹56,814.91 Lowest |
| 1.01 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm) | 26.55 | metre | 545.8 ₹14,490.99 | 499 ₹13,248.45 | 496.19 ₹13,173.84 Lowest |
| 1.01 | 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 4.02 | cum | 7,736.32 ₹31,076.8 | 7,033 ₹28,251.56 Lowest | 7,033.02 ₹28,251.64 |
| 1.01 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 67.55 | sqm | 349 ₹23,573.21 | 318 ₹21,479.31 Lowest | 318.05 ₹21,482.69 |
| 1.01 | 50.13.1:9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete | 53.96 | sqm | 323 ₹17,429.08 | 296 ₹15,972.16 | 294.95 ₹15,915.5 Lowest |
Tender Value
₹3.4 L
EMD Value
₹8,459
Closing Date
2 Mar 2025, 2:00 pmClosed
The Assistant Engineer
The Assistant Engineer, LID EW Section , Eraviperoor Grama Panchayat
BUILDING MAINT.
2025_LSGD_731700_12
3/evpr
Open Tender
Civil Works - Buildings
Item Rate
180 days
eraviperoor
Please refer Tender documents.
7 documents required · 7 mandatory
₹750
Yes
₹8,459
Yes
15 May 2026
23 Feb 2025
3 Mar 2025
23 Feb 2025
2 Mar 2025
23 Feb 2025
23 Feb 2025 - 25 Feb 2025
Amount
Building
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
OD343554/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm)
50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
50.13.1:9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete
13.63.1:Painting with aluminium paint of approved brand and manufacture to give an even shade.Two or more coats on new work
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
EDAKULAM LABOUR CONTRACT CO OPERATIVE SOCIETY LIMITED PT 157 (BID ID -2133731)
JITHIN VARGHESE (BID ID -2132430)
Bidder Name
JITHIN VARGHESE
EDAKULAM LABOUR CONTRACT CO OPERATIVE SOCIETY LIMITED PT 157
RAJESH A BHASKAR
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1194773.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
Tendernotice_2.pdf
PDF • 0.07 MB
viewsbd.pdf
Tender Documents • 1.86 MB
BOQ_1194773.xls
BOQ • 0.31 MB
RETENDERNOTIC1.pdf
Tender Documents • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .