Providing drinking water facilities at Venkatanagaram-1 Pushkar Ghat in Venkatanagaram village of Venkatanagaram GP of Rajamahendravaram mandal.Est Cost Rs 21.98 Lakhs.

Drilling of bore well by Rotary Rig to a finished Diametra of 350 mm justify both sides. Which may be carried out by pilot bore of sutable Diametre and then reaming to the required Diametre in all formations suitable for Rotary drilling such as alluvial soils, sand stone formation etc., including insertion of 175mm Dia PVC blue casing pipe upto the depth as directed by the department including gravel packing, fixing of bailplug,clampset bore development.conducting yield test,crew charges and transportation charges of Rig etc. and other supporting vehicles and all other charges required in the firation of pipes assembly complete including all labour charges etc. any where in E.G.Dist but exclude the cost of metarials. The bore should be developed with compressed air till clear water free from sand and other materials is contionously discharged. The gravel packing should have minimum annualar thickness of 70mm. The gravel should be throughly washed before packing The gravel packing should be in such a way that the theoritical quantity is consumed completely The pipe assembly should be securely clamped. The entire work should be executed confirming to IS 2800 part 1 &11/1979. (But excluding the cost of casing pipe including Contractor's profit 13.615%

Cost and supply of 175mm Blue casing pipes for casing including all labour charges for 2 conveyance to work site including Contractor's profit of 13.615%

Labour charges for slotting of 175mm dia Blue threaded casing pipe including Contractor's profit of 13.615%.

Cost and supply of 180 mm dia pvc Bore cover etc., and complete

Provision for Geological Survey charges including Contractor's profit of 13.615%

Supply and Transportation of 5 HP 5-10 Stage, 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes: As per list of recommended brands as category I. Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/ ARYEN VARSHA /Falcon/Prithvi The rate including Contractor's profit 13.615%

Fabrication ,transportation and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using LAURITZ KNUDSEN (FORMERLY L&T) / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc. complete for 3 phase motor pump sets.Voltmeter: 0-500 V 96x96mm size. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No. 32 A TP, 10KA MCB. - 1NoIndication lamps (R-Y-B) with switch control - 1setVoltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor Makes: As per list of recommended brands. L&T/C&S/SALZAR/HPLJAEI/Meco/Rishab) Ammeter (96x96mm size) No Ammeter Makes L&T/C&S/SALZAR/HPL/ΑΕΙ Meco/Rishab)) Up to 7.5 HP with DOL Starter

Supply of 3 Core 4.0 sqmm Flat Copper cable Stor Submersible Motors confirming to1990 Makes As per list of mended brands as category-1 makes Finoles/RR Kabel Polycab/Havells/ KEI/Gloster Goldmedal /GM/ Finecab/Milton)Contractor's profit 13.615%

Labour charges for Errection of Motor and Pumpsets including Contractor's profit 13.615%

Manufacture, Supply. & Delivery of HDPE Pipes conforming to IS 4984-1995 including transportation to anywhere in A.P, excluding all taxes including Contractor's profit 13.615% 75 mm dia HDPE 10.00 kgs Pipes

Manufacture, supply, & delivery of GI Pipes of various sizes as per IS-1239 and transportation anywhere in Andhra Pradesh,excluding all taxes including Contractor's profit 13.615% For 65mm GI ‘B’ Class Pipe

Cost, Supply and delivery of HDPE PE-100 6 Kg/Sqcm Pipes as per IS : 4984/2016 including cost and conveyance, excluding taxes etc. complete for 1.00 Rmt. The rate inclding Contractor's Profit @ 13.615% for 75 mm dia HDPE - 6Kg/cm2

Earth work excavation for pipe line trences (2/3 machinery and 1/3 manual) in all soils except rocky soils including lowering, laying and jointing of pipes with required fittings/specials true to alingment and gradient, refilling with already excavated earth, watering, tamping and removing surplus earth and testing to required hydraulic test pressure etc. complete for finished item of work of 1.00 Rmt of HDPE PE-100 6 Kg/Sqcm. 75 mm dia HDPE - 6Kg/cm2

Cost, Supply and delivery of HDPE PE-100 6 Kg/Sqcm Pipes as per IS : 4984/2016 including cost and conveyance, excluding taxes etc. complete for 1.00 Rmt. The rate inclding Contractor's Profit @ 13.615% 90mm dia HDPE - 6Kg/cm2

Earth work excavation for pipe line trences (2/3 machinery and 1/3 manual) in all soils except rocky soils including lowering, laying and jointing of pipes with required fittings/specials true to alingment and gradient, refilling with already excavated earth, watering, tamping and removing surplus earth and testing to required hydraulic test pressure etc. complete for finished item of work of 1.00 Rmt of HDPE PE-100 6 Kg/Sqcm. 90mm dia HDPE - 6Kg/cm2.The rate inclding Contractor's Profit @ 13.615%

Supply, delivery and Installation of RO plants of 2000 LPH capacity .( As per technical specifications in Vol- I of tender document ). The rate including all other charges and exclding Taxes.

Supply and delivery of 42 / 32mm dia UPVC raising column pipe, with standing upto 20 Kgs / CM2 upto 200 Mts for submersible motors with both ends square threaded, with rubber 'O' rings with smooth inner surface which can take the minimum load of 2100 to 4000 Kgs weights. Makes: As per list of recommended brands.The rate inclding Contractor's Profit @ 13.615% and exclding Taxes.

Supply and delivery of 60/50 mm UPVC pipe with standing upto 20 Kgs / CM2 upto 200 Mts for submersible motors with both ends square threaded, with rubber 'O' rings with smooth inner surface which can take the minimum load of 2100 to 4000 Kgs weights.Makes: As per list of recommended brands.The rate inclding Contractor's Profit @ 13.615% and exclding Taxes.

Supply of 25mm PPR Ball Valve conforming to DIN Standards 8077/8092 .The rate inclding Contractor's Profit @ 13.615% and exclding Taxes.

Supply and Fixing of compression fittings shall comply with ISO 17885 2015, PN-16 rating and manufactured from virgin resin of PE-80 having blue color. Raw material must be WRAS approved as per BS 6920 for effect on water quality intended for human consumption. Compression fittings should have moulded in SS 304 threaded insert outlet with thread dimension confirming to IS 554/ISO 7. The cost shall include testing of all materials, labor, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking and fixing etc, complete as specified and directed by the departmental Engineer in charge, but excluding all taxes.Compression male/female threaded adaptor with SS insert D25 mm X 3/4 "

Supply of 40 A DP Isolator. Makes: As per list of recommended brands as category I.The rate inclding Contractor's Profit @ 13.615% and exclding Taxes.

Supply of 6-32A, DP MCB10KA C/D Curve ISI Mark. Makes: As per list of recommended brands as category I

Supply of 4 Way SPN DB with IP 30, Protection suitable for DP Incomer-1 No, SP MCBs - 2 NosS.P outgoings andfor 1 No incomer etc., complete as per IS 8623; IS 13032; IEC 61439-3. The rate inclding Contractor's Profit @ 13.615% and exclding Taxes.

Supply of ISI marked 32mm outer dia (1.90 - 2.10) mm thickness medium grade with IS:9537-part 3 rigid PVC Conduit.The rate inclding Contractor's Profit @ 13.615% and exclding Taxes.

Supply of 4.0 Sq mm ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade conforming to IS: 694:2010 & IS:17048/2018(for HFFR/ZHFR variants).

VRCC M20 proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size Hard Blasted Granite (IS383, 1970) Machine Crushed graded metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, , all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work (APSS No. 402) ..The rate include all other charges and contractor profit and municipal allowance but excluding Seignorage and GST. for colums

VRCC M20 proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size Hard Blasted Granite (IS383, 1970) Machine Crushed graded metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, , all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work (APSS No. 402) ..The rate include all other charges and contractor profit and municipal allowance but excluding Seignorage and GST. for beam alround

Filling with Sand Cushion under footings with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to the work site and all operational & incidental charges, labour charges, etc., complete for finished item of work. (APSS NO. 309 & 310).The rate include all other charges and contractor profit and municipal allowance but excluding Seignorage and GST

Cement concrete (1:4:8)prop using 40 mm gauge HG metal proportion nominal mix (cement: fine aggregate: Coarse aggregate) (IS383, 1970) Machine Crushed graded metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, , all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work (APSS No. 402) . The rate include all other charges and contractor profit and municipal allowance but excluding Seignorage and GST.

Construction of super stucture with brick masonary in (1:6) using 2nd class bricks traditional size 23 x 11 x 7 cms. including cost and conveyance of all materials,labour charges and seign. charges etc. complete. The rate include all other charges and contractor profit and municipal allowance but excluding Seignorage and GST.

Plastering with CM (1:5) 12mm thick including cost and conveyance of all material, labour charges etc., complete including Overheads & C.Profit @13.615%

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surgace to remove all dirt and remains of loose powdered materials, incluldling cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work for External walls i.ncluding cost and conveyance of all material, labour charges etc., complete including Overheads & C.Profit @13.615%

Cost of steel and its fabrication charges incl., bending, cost of binding wire etc., complete as per standard specifications including Overheads and contractor profit @13.615 % -

Supply of Prepainted Galvanized Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Zinc coating Z120 GSM. Tensile Strength: 300 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with .Regular Range Colours.The rate include all other charges and contractor profit and municipal allowance but excluding Seignorage and GST.

Cost of steel and structure is made up GI section for trusses including Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power harges, excluding cost of fixing in positioncomplete as per standard specifications including Overheads and contractor profit @13.615 % -

Drilling of 300 mm diameter Singel Under Reamed piles for a depth of 3 mt with RCC(1:1.5;3) using 20 mm size HBG Metal using re1quired quantity of steel per 1 cum of concrete including cost and conveyance of all materials and all labour charges etc complete but excluding cost of steel and fabrication charges of steel per 1 No..The rate include all other charges and contractor profit and municipal allowance but excluding Seignorage and GST.

VRCC M20 proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size Hard Blasted Granite (IS383, 1970) Machine Crushed graded metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, , all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work (APSS No. 402) ..The rate include all other charges and contractor profit and municipal allowance but excluding Seignorage and GST. for column pedestal

VRCC M20 proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size Hard Blasted Granite (IS383, 1970) Machine Crushed graded metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, , all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work (APSS No. 402) ..The rate include all other charges and contractor profit and municipal allowance but excluding Seignorage and GST. for columns

VRCC M20 proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size Hard Blasted Granite (IS383, 1970) Machine Crushed graded metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, , all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work (APSS No. 402) ..The rate include all other charges and contractor profit and municipal allowance but excluding Seignorage and GST. for beam alround

VRCC M20 proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size Hard Blasted Granite (IS383, 1970) Machine Crushed graded metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, , all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work (APSS No. 402) ..The rate include all other charges and contractor profit and municipal allowance but excluding Seignorage and GST. for roof slab of 125 mm thick

Construction of super stucture with brick masonary in (1:6) using 2nd class bricks traditional size 23 x 11 x 7 cms. including cost and conveyance of all materials,labour charges and seign. charges etc. complete. The rate include all other charges and contractor profit and municipal allowance but excluding Seignorage and GST.

Plastering with CM (1:5) 12mm thick including cost and conveyance of all material, labour charges etc., complete including Overheads & C.Profit @13.615%

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surgace to remove all dirt and remains of loose powdered materials, incluldling cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work for External walls i.ncluding cost and conveyance of all material, labour charges etc., complete including Overheads & C.Profit @13.615%

Cost of steel and its fabrication charges incl., bending, cost of binding wire etc., complete as per standard specifications including Overheads and contractor profit @13.615 % -

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks and labour charges.The rate include all other charges and contractor profit and municipal allowance but excluding Seignorage and GST.

S& F 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete The rate include all other charges and contractor profit and municipal allowance but excluding Seignorage and GST.

Supplying & fixing Gunmetal (GM) Vertical Check (Non return) Valve as per IS778 Iclass heavy duty 50 mm NB Size.The rate include all other charges and contractor profit and municipal allowance but excluding Seignorage and GST.