SPECIAL REPAIR TO BUILDING NO P-37 (SINGLE OFFRS ACCN) OF 11 RAPID (H) ALFA MESS AT MIL STN AHMEDABAD

Amount

Demolition of brick work built in CM including all quions, arches, pillars etc complete all as specified.

Material and Labour brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 by using old sized bricks complete all as all as specified and directed.

Material and Labour brick work with sub class "B"brick (old size) straight or curved on plan exc 6m mean radius in CM 1:6 completed all as specified.

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified or directed.

Material and Labour for rendering 15mm thick on fair faces of brick/ concrete surfaces in CM (1:4) mixed with water proofing compound in top @ 3% by weight of cement or as per manufacturers instruction finishing the surface fair and even without using extra cement complete all as specified and directed. (WPC measured and paid seperately).

Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed.

Material and Labour for preparation of new plasteres surfaces on walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Material and Labour for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed.

Material and Labour for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper with priming plastered and other surfaces with alkali resistant priming paint with 02 mm wall care putty complete all as specified and directed.

Material and Labour for complete removal of existing treatment on walls and applying two coats of oil bound distemper over with 2mm wall care putty with priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed.

Material and Labour for preparation of existing treatment of old plastered surface of walls and for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces for any height of building with necessary scaffolding with saftey measures complete all as specified and directed.

Material and Labour for 5 mm thick rendering on ceiling surfaces in any position in CM (1:3) and finishing the surfaces even and fair complete all as specified and directed.

Material and Labour for preparation of new surfaces of ceiling plastered sheet and applying three coat of white wash complete all as specified and directed

Material and Labour for preparation of old surfaces of ceiling plastered sheet and applying two coats of white wash complete all as specified and directed

Taking down chowkhats or frames area exc. 1.50 Sqm and n. exc 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutter of any description but exc 1 sqm and n. exc. 2 sqm each complete all as all as specified and directed.

Supply and Fixing powder coated anodised Aluminium door frame of size 100 x 44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98 mm thick, botom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 X 44mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydrolic door closer, handles 'D' type 125mm, floor door stoppers, tower bolt 200 mm, sliding door bolt 300 mm or mortice lock,hydraulic door closer with 5.50 mm thick tinted glass / preleminated particle board (Novapan) panel and making good of wall surface to match existing surface complete all as all as specified and directed.

Supply and Fixing powder coated anodised Aluminium alloy sections sliding windows with frames of Jindal or equivalent and 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.00 mm nominal thickness one shutter with stainless steel wire cloth .36mm dia and average width of aperture 1.4mm , aluminium alloy handles/lock etc. complete all as specified and directed. Note: Thickness of chowkhats/Frame section and sliding shutter section shall be minimum 1.5mm (Note :Rates include all glazing/aluminium wire cloth, rubber packing, jointing cleats, glazing clips, aluminium snap beading, locking arrangements, handle, plastering and finishing the surface to match the exisiting surface after fixing of window.)

Supply and Fixing aluminium anodised ventilator with Fixingaluminium frame of size 65 x 40 x 1.98mm thick Fixingin vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, rubber gasket, aluminium beading etc including taking down existing vantilator complete all as specified and directed.

Supply and Fixed mild steel frame work as in doors, conforming to Fe-410W (Gde E-250) including fixing of holdfast and hinges complete all as specified. (Note - Hinges shall be measured and paid separately)

Supply and Fixing 30 mm flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both side etc complete all as specified and directed.

Material and Labour for Second class hardwood Glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, cham-fered or rounded, mitred and rebated sash bars, any numbers and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats.

Suppy and Fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and Fixingwith stainless steel wire staples complete complete all as specified and directed

Supply and Fixing Factory made solid panel PVC door /cupboard shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and Fixingin opening as per specification and drawing complete all as all as specified and directed.

Supply and Fixing stainless steel butt hinges medium weight 100 mm long complete all as specified and directed.

Supply and Fixing Aluminium anodised barrel tower bolt of extruded section 200 mm size complete all as specified and directed.

Supply and Fixing150 mm size aluminium anodised door handles complete all as all as specified and directed.

Material and Labour for sliding door bolt of 300mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and Fixing complete all as all as specified and directed.

Supply and Fixing 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

Supply and Fixing Floor door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as all as specified and directed.

Dismantling asbestos cement (corrugated or semi-corrugated etc.) sheets in roof covering complete all as specified.

Supply and Fixing 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , including Ridge Fixingwith self tapping screws complete all as specified.

Supply and Fixing for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, Fixingwith self tapping screws as specified.

Dismantling timber scantlings 40sq. cm and over in section, in any position as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified.

Material and Labour Rolled steel sections as in main and cross beams,iron flats, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; Fixingwith angle cleats or other connectiong plates complete including cutting, grinding, welding etc Fe 410 W(Gde?E- 250) as required complete all as specified.

Supply and Fixing Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to FE 410-W (Gde-E-250, Quality-A) complete all as specified.

Supply and Fixing providing SS-316 grade hand rail with 50 mm dia hand rail, middle rail 15 mm dia, and vertical pole 1.00 mtr height of 25 mm dia at 600 mm C/C including necessary cups/fittings, grouting complete all as specified and directed. Note : Railing comprising of hand rail, middle rails vertical post and accessories shall be considered as one unit length

Supply and Fixing in repair curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

Supply and Fixing in repairs vitreous china wash basin, white, flat back, size 550x400m excluding taps, chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete all as specified and directed.

Supply and Fixing in repair vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete including all as specified and directed.

Supply and Fixing in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as directed.

Supply and Fixing in repairs PTMT Swivel Shower rose, 15 mm dia ( Minimum wt 40 gms), complete all as all as specified and directed.

Supply and Fixing in repairs sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm all complete as specified and as directed.

Supply and Fixing in repairs Bib taps (long body )fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as directed.

Supply and Fixing in repairs angle stop valve of cast copper alloy chromium plated (fancy type) screwed for iron pipe of 15mm bore all as specified.

Supply and Fixing in repairs Angle stop valve of PTMT any colour high pressure screwed for iron pipe and Fixingall as specified and directed.

Supply and Fixing in repair pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore complete all as all as specified and directed.

Supply and Fixing in repairs Two way cock/Two way Angle cock with wall flange matt chrome finish complete all as specified and directed.

Supply and Fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and Fixingin position complete in all respect as specified.

Supply and Fixing in repairs brass 15 mm CP central hole mixer pillar tap for mixing hot & cold water screwed down for iron pipe, Fixingin repairs.

Supply and Fixing in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and Fixingwith stainless steel wire staples complete complete all as specified and directed.

Material and Labour for shotcreting/guniting 1 :2 (CM) mixed with epoxy resin and hardner (manufactured by FOSROC/MC BAUCHEMIC/CICO/PIDILITE)@ 2% by weight of cement in equal proportion using shot-crete pumps and allied equipment,in thickness 30 mm all as per manufactureres instruction.(Upto 7 m height)

Demolition of stone slab and tiles of any description or thickness as in floors, apron etc laid, bedded and pointe in any mortar complete all as directed.

Material and Labour Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

Material and Labour Vitrified light shade Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and over and including screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed.

Ditto as per item no above but in vertical surfaces such as skirting over and including 10 mm thick backing coat in cement mortar 1:4 -ditto-.

Material and Labour for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified and directed

Supply and Fixing 19 mm thick expanded closed cell rigid PVC sheet with a particularly fine and homogeneous cell structure and silky matt surfaces, nominal density of PVC sheet should not be less than than 500 Kg/m3, complete all as specified and directed. Make : FOREX Classic or Equivalent

Material and Labour for preparation of old steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Material and Labour for preparing new steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Taking down eaves gutters and rain water pipes of presure rating 4kg/cm2 (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc complete all as specified and directed.

Supply and Fixing 110mm PVC (SWR) pipes single socket in any length Fixingto wall complete all as specified and directed.

Supply and Fixing 75mm PVC (SWR) pipes single socket in any length Fixingto wall complete all as specified and directed.

Supply and Fixing PVC (SWR) bends 110mm dia complete all as specified and directed.

Supply and Fixing PVC (SWR) bends 75 mm dia complete all as specified and directed.

Supply and Fixing in repair 75mm dia cast iron floor trap with grating including jointing to waste pipe Fixingin cement concrete type B-1 (1:2:4) (20mm graded stone aggregate) complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.

Supply and Fixing 4mm thick coloured textured deigner ceiling board (Everest) of size 595 X 595 mm fixing with screws/Clips including Tee grid suspension system of size 600 mm X 600mm type -1 made out of roll framed hot dipped galvanised steel zinc coated of not less than 120 gm/ Sqm , main runner shall be 0.3 mm thick of section 24 mm X 33 mm cross runner 0.3 mm thick of section 24 mm X 25 mm , wall angle shall be 0.63 mm thick of section 24mm X 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod , system exposed portion shall be prepainted polyster coated in off white / white in colour complete with material, fixing, jointing etc complete all as specified.

Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

M&L for point wiring with 1100 volts grade PVC insulated FR-LS multistranded copper conductor cable 1.5 sqmm (Phase - R Y B, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings / fixing accessories and sunken galvanized pressed modular steel terminal boxes of thickness not less than 1.2 mm covered with suitable and required size of modular box, plate with cover for mounting modular switches, sockets, fan regulators complete including making good the wall surfaces with matching colour on wall for the following

(a) One light point controlled by one switch.

(b) One ceiling/ex fan point controlled by one switch.

(c) One socket outlet 6 amp controlled by one switch on the same board with other switches.

(d) One socket outlet 6 amp controlled by one switch on indepdendent board.

(e) One bell point controlled by one bell push.

(f) One light point controlled by two, two way switches.

Material and Labour for Point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with suitable and required size of modular box for one 16 amp socket outlet controlled by one switch on independent board complete.

Supply and Fixing modular switch one way 6 amp 1 module all as specified and directed

Supply and Fixing modular switch one way 16 amp 1 module all as specified and directed

Supply and Fixing modular socket 6/16 - 3 pin combined 2 module all as specified and directed

Supply and Fixing modular socket 6 amp 3 pin, 2 module all as specified and directed

Supply and Fixing Ceiling rose 6 amp, 3 plates polycarbonate body complete

Supply and Fixing modular switch two way 6 amp 1 module all as approved.

Supply and Fixing modular bell push, 6 amp, 1 module.

Supply and Fixing modular hum free electronic step fan regulator, 100 watt 2 module all as specified and directed

Supply and Fixing bell multi music type, AC, 240 volts complete. Make-Anchor or SSK or Havells Reo as approved.

Supply and fixing of power unit for AC or geyser 3.5 KW 4 module including sunken modular GI metal boxes not less than 1.2mm thick and white modular mounting plates with frame complete all as specified and directed.

Supply and Fixing MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

Supply and Fixing recess/ suspended LED round star magic panel light colour changing 3 in 1, 15 watt with powder coated with ceiling cut out size 18 watt complete, 6500K including connecting electricity to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm, PF>0.95 and life> 15000 hrs all as required and specified. Make Crompton model no LSDMAGICRMN-12W or equivalent in Wipro, Plilips, Havells.

Supply and Fixing Decorative wall light up to 20W watt, 6500K including connecting electricity to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm, PF>0.95 and life> 15000 hrs all as required and specified.

Supply and Fixing LED bulkhead fitting 10 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required all as per Philips cat ref no. WT202W LED6S CW PSU S1 PC or equivalent in Wipro or Bajaj or Havells as approved.

Supply and Fixing LED 20W streetlight made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LED's with secondary optics and IP65 protection complete with fixing arrangement and connections as directed

Material and Labour for submain wiring alongwith earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal sizes:-

(a) 2x6 sqmm + 1x6 sqmm earth continuity conductor in 20 mm dia conduit..

(b) 2x4 sqmm + 1x4 sqmm earth continuity conductor in 20 mm dia conduit..

(c) Same as above but 4x6 sqmm + 2x6 sqmm earth continuity conductor in 32 mm dia conduit..

Supply and Fixing MCB distribution board ETPN, 415 volts 4 way powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43- IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F LED batten (1.2 m) made of PVC housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make : Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH " or Havells Lumiline plus as approved.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and Fixing tripple pole and neutral, powder coated, CRCA steel sheet MCB distribution board constructed as per IS 8623 suitable for MCCB incomer upto 160 amp, 4 way, 415 volts, degree of protection IP 43 - IK- 09 with metal door, recess mounted, having 200 amp insulated tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces etc as required.

Supply and Fixing MCCB four pole, 160 amps, 25 KA thermally adjustable between 70 to 100% including 4 spreader link set of same make as that of MCCB for connection, required lugs etc complete.

Material and Labour for earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-5 of SSR Part-I. all specified

Supply and Fixing MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

(a) Single pole 6 to 32 amp.

(b) Double pole 32 amp.

(c) Four pole 63 amp.

Taking down carefully aluminium or copper submain wiring with PVC surface conduit or casing caping and making good disturbed surfaces complete.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete.

Taking down Ceiling Fan of any make, type and sweep by disconnecting Electric Connection and deposited to MES store yard.

ARTI CONSTRUCTION (BID ID -3224795)

GIRNAR CONSTRUCTION (BID ID -3224062)

ALBA AC AND REF SERVICES (BID ID -3230497)

DMA PROJECTS (BID ID -3230414)

SNEH TRADERS (BID ID -3223541)

VIJAY CONSTRUCTION CO (BID ID -3225131)

Shreeganesh Construction (BID ID -3221698)

RISING ELECTRICALS (BID ID -3224196)