PROVISION OF GUARD ROOM WITH ATTACHED TOILET NEAR MAIN GATE OF 14 ARTY BDE CAMP AND PROVISION OF DRAIN ALONG PERIMETER WALL FROM JCOs MESS TO OFFICERS MESS UNDER AGE B/R-I OF GE CLEMENT TOWN

Amount

Excavation in trenches n.exc 1.5m deep and n.exc 1.5m wide and getting out in any type of soil complete all as specified and as directed.

Removing excavated surplus soil exc 250 m and n. exc 500 m and depositing where directed at a level n exc 1.5 mtr high from the starting point complete all as specified and as directed.

Returning, filling in, including spreading levelling watering and well ramming in layers not exc 25 cm thichness, complete all as specified and as directed.

M & L for cement concrete in foundations, filling and mass concrete, type C2, 1:3:6 ( 40mm graded aggregate) complete all as specified and as directed.

M & L Cement concrete type B2, 1:2:4 (40mm graded aggregate) for surface channels and drains complete all as specified.

M & L PCC type B1, 1:2:4 (20mm graded aggregate) as in coping apex stone, bed plate etc complete all as specified.

M&L for pre-cast RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in manhole covers, set in CM 1:6 complete all as specified and as directed.

Surface dressing n exc 15 cm deep in soft/loose soil, complete all as specified and as directed.

M & L plain cement concrete type D-2 1:4:8 (using 40mm graded stone aggregate) as in foundation complete all as specified and as directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Ditto, but 6mm to 8mm dia.

Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and as directed.

M&L brick work with fly ash old size bricks straight or curved on plan exc 6 m mean radius built in cm (1:6) complete all as specified and as directed.

M&L for damp proof course to horizontal or vertical surfaces including necessary formwork, 40 mm thick, in Cement concrete 1:2:4 type B0, complete all as specified and as directed.

M&L applying evenly a tack coat of bitumen 85/25 at the rate of 1.2Kg/sq.m. including cleaning surfaces complete all as specified and as directed.

S&F Polythene film 150micron laid over bitumen coating , complete all as specified and as directed.

M & L RCC M-25 as in fdns and footings of colums and plinth beam and bases of column, complete all as specified and as directed.

M & L RCC M-25 as in Columns, pillars, posts etc, complete all as specified and as directed.

M & L RCC M-25 in Beams, cantilevers, bressumers, lintels over 1.5 m span, complete all as specified and as directed.

M & L RCC M-25 as in slabs, complete all as specified and as directed.

M & L RCC M-25 as in chajjas/shelves, complete all as specified and as directed.

M&L Form work to footings/PB, fair finished surface of concrete, complete all as specified and as directed.

M&L Form work to sides of columns fair finished surfaces of concrete, complete all as specified and as directed.

M&L Form work to sides and soffits of floor or roof beams etc fair finished surfaces of concrete, complete all as specified and as directed.

M&L Form work to slabs soffits fair finished surfaces of concrete, complete all as specified and as directed.

Formwork to chullah hoods, chajjas, troughs & similar items including edges, complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification and drawing complete all as specified and directed. Make : Rajshree / Sintex

S&F factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails .MS frame shall be covered with heat moulded wood grain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail ,bottom rail and lock rail, Paneling of plain colour PVC sheet to be fitted in MS frame welded with and including stainless steel hinges 100mm medium weight complete all as specified and directed. Make : Rajshree / Sintex

S & F Pressed steel frames of size 125x60mm for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc; complete as specified

M&L for filling cement concret 1:3:6 type C-0 (12.5mm graded aggregate) as in steel frame of door complete all as specified and as directed.

M & L 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides Make : Century

M&L 35mm thick IInd class hardwood glazed and skeleton factory made shutters with three panels, open rebated and prepared to receive glass gauge etc, edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutter as specified in SSR (Part-I)- 2009 complete all as specified and directed.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed stainless steel wire staples/xpm

S&F in repair drapery rod 30mm dia Aluminum fancy type powder coated wood finish including rings, knobs and brackets complete all as specified and directed.

S&F Stainless steel butt hinges 100 mm long, complete all as specified and directed.

S&F 200 mm long stainless steel tower bolts of extruded section, complete all as specified and directed.

M&L Stainless steel sliding door bolts, 300 mm long with bright bolt not less than 12 mm dia with and incl a minimum of 6 bolts and nuts, flour on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 150 mm long Stainless steel door handles, complete all as specified and directed.

M&L 5mm thick rendering cement mortar over celing concrete surfaces in cm (1:3) including finishing the surface even and fair all as spd and directed

M&L 5mm thick rendering cement plaster over concrete wall surfaces in cm (1:3) including finishing the surface even and fair all as spd and directed

M&L 15mm thick rendering cement plaster on other than fair faces of brick work or concrete surfaces but in cm (1:6) including finishing the surface even and smooth without using extra cement all as spd and directed

M&L 15mm thick rendering cement plaster on concrete surfaces in cm (1:4) including finishing the surface even and smooth without using extra cement mixed with WPC all as spd and directed

Supply only liquid water proofing compound, complete all as specified and as directed.

M&L for applying three coats of white wash on new Ceiling surface including preparation of surface, complete all as specified and as directed.

M&L two coats of distemper oil emulsion over 1mm thick wall care putty including preparation of new surfaces of walls, complete all as specified and as directed.

M&L two coats of Exterior emulsion paint (Apex) over one coat of primer including preparation of new surfaces of walls, complete all as specified and directed.

Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick, area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed 15 mm thick in CM 1:4 as in floors, complete all as specified and as directed.

M&L Joint free glazed tiles 450x350x7 mm coloured on vertical surfaces, set and jointed in neat cement slurry and pointed in white or colour cement to mach over screed bed 10 mm thick in CM 1:3, complete all as specified and directed.

M&L for Plain Cement concrete 1:5:10 type E2 as in foundations, filling and mass-concrete and sub base, complete all as specified and as directed.

M&L for spreading & levelling in layers n exc. 25 cm thick & well ramming including watering as required, complete all as specified and as directed.

Removing excavated soil material n exc 50 m and depositing where directed at a level n/exc 1.5m above the starting point all as spd and directed

M&L for 75mm thick plain cement concrete in plinth protection type C-1, 1:3:6 (20mm graded aggregate) as in flooring and finished even and smooth without using extra cement complete all as specified and directed.

M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed.

M&L treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per sqm of vertical area (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed.

Treating the top surface of field earth at the rate of 5 litres of emlusion per sqm of surface area, complete all as specified and as directed.

Treating the soil under plinth protection at the rate of 5 litres of emlusion per sqm of surface area, complete all as specified and as directed.

Treating the soil alongwith external perimeter, complete all as specified and as directed.

M&L for providing and laying water proofing treatment on top surfaces of roof after cleaning of roof surfaces with water and filling cracks with sealing compound and dried top surface of roof. Apply a coat of cold bituminous primer @ 0.30 liter per Sqm and followed by a layer of APP polymer modified five layered water proofing membrane 3mm thick weight not less than 3.60 Kg/Sqm with non woven polyester reinforcement (weight not less than 150 gm/Sqm) of M/s STP Texsa Ltd or M/s IWL (I) Ltd or M/s STP Ltd. The APP membrane shall be laid with LPG connected torch method. A layer of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm and a layer of bituminous aluminum paint as final finish @ 0.20 Kg/Sqm shall be applied on top surfaces of APP membrane, Application including overlap, side lap shall be provided as per manufacturer instructions and as specified and directed. The side lap and end laps should have overlap of 75mm to 100mm and should be thermo fused together so that it forms a single sheet through out complete all as specified and directed by Engineer-in-Charge.

S & F 15mm dia GI tube medium grade galvanised with all fittings fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed.

S & F 20mm dia GI tube medium grade galvanised with all fittings fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed.

S & F 20mm dia gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed, complete all as specified and as directed.

Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills sunshades, shelves lintels etc and cutting chases for concealed water pipe etc and making good cutting not exc 10cm girth, complete all as specified and as directed.

S & F 125/110 mm PVC (SWR) P Traps long arm, complete all as specified and as directed.

S & F PVC low level flushing cistern 10 ltr capacity white colour incl with inlet ball, valve, float and handle including bracket, flush pipe of polyethylene of low or high density or PVC pipe 32mm dia for low level cistern complete

S & F Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets

S & F 15mm fancy type chromium plated Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S & F 15mm fancy type chromium plated Stop valves, cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type

S & F 15mm dia and 450mm long connection pipe with PTMT nuts at both ends, complete all as specified and as directed.

S& F fancy type chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed but fancy type, complete all as specified and as directed.

S&F 20 mm dia and 600mm long between flanges brass chromium plated tubular towel rail, complete all as specified and as directed.

S & F waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms) complete all as specified and as directed.

S&F rotational moulded,multilayer HDPE water storage tank of 500 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms ) , complete all as specified and as directed. Make : Syntex or equivalent

S & F Vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with CP Urinal spreader, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat seat cover all as specified and as directed. (Make: Cera/Parryware and equivelent)

S & F 15mm dia PVC health faucet of make Jaquar, complete all as specified and as directed.

S & F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

S & F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

S & F 110 mm PVC (SWR) junction single, door (Single T) equal or unequal, complete all as specified and as directed.

S & F 75 mm PVC (SWR) door bends any radius, complete all as specified and as directed.

S & F 75 mm PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement, complete all as specified and as directed.

S & F Powder Coated Anodised aluminium frame for doors, windows ventilators with one or more rebats including joining cleat for fixing etc complete all as specified.

S & F Powder coated Anodised aluminium window & ventilator shutters sliding type size of frame 45 x 44 x 2mm thick incl necessary cleats glazing clips anodised, alum snap bidding screw and with and including all fittings/fixtures item and rubber lining at sides for air locking, aluminium mongry complete all as specified and directed

S & F 4.8 mm sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane, complete all as specified and directed.

Excavation over areas, exc 1.5m deep and getting out soft/hard dense soil, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone agg) as in bed for SGSW Pipe complete all as specified and directed.

M&L for providing cement concrete type B1, 1:2:4 (20mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded curshed storne agg) as in coping/bunching and similar work complete all as specified and directed.

M&L brick work with sub class "B" old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:4) complete all as specified and directed.

M&L brick work with sub class "B" old size bricks, in one brick thick honey comb walling built in Cement mortar (1:4) complete all as specified and directed

M&L for slat glazed stone ware (SGSW) drain pipe grade 'A' 150mm bore laid in trenches and jointed complete all as specified and directed.

Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165, complete all as specified and as directed.

Material and labour for point wiring with 1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FRLS) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked surface/concealed conduit and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface,provision of CI/Pressed steel terminal switch box for normal piano switch/socket & for modular switch / socket with plastic laminated sheet 3 mm thick fixed with brass screw and washers for normal piano switch / socket, along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) as earth wire connected with main common earth dolly complete all as specified and directed for the following (a) One light/fan/exhaust fan/bell point controlled by one, one-way Piano type switch 5/6 Amp.

One 3pin/5pin 5/6 Amps socket out let on same board controlled by one, one-way Piano type switch complete all specified and directed.

One 3pin/5pin 5/6 Amps socket out let on independent board controlled by one, one-way Piano type switch complete all specified and directed .

All as per item No 1 above but with 2.5 Sqmm PVC insulated FRLS cable for 15 Amps power point.

All as per item No 1 above but with 4.0 Sqmm PVC insulated FRLS cable for 15 Amps power point.

Supply and fixing switch piano flush type single pole, one-way 5/6 Amps, 240 Volts AC

Supply and fixing switch piano flush single pole, one-way 16 Amp, 240 Volts AC

Supply and fixing socket out let 5 pin 6 Amps flush type all as specified.

Supply and fixing socket out let 5/6pin 5 Amp and 15 Amp flush type (multi) suitable for 240 Volt AC all as specified.

Supply and fixing ceiling rose surface bakelite 65x25mm dia having three terminals all as specified

Supply and fixing batton/angle holder insulated body with back plate, suitable for batten fittings in & including 9 watt LED lamp all as specified & directed.

S& F in repair Mirror Light LED 7 Watt fitting as per Cat No LCL-07-CDL of Make-Crompton or equilent make in Philips or C&S complete all as specified and as directed.

S& F wall mounted LED batten Box type fitting Blu colour end caps pre-wired LED fitting all as per cat part No DMLN 1 LT 8-16 with & including LED T8 tubular lamp of make Cromption or equivalent make in C&S/ Havells /Philips .

S & F in repair LED building security light with bracket and fixing arrangements 25 watt LED with bracket complete all as specified and directed. Cat Part No LSTS-25 CDL of Crompton or equivalent make in Havells/ C&S

Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 4 way with 200 Amps rated bus bar. all as specified and directed .Make- legrand cat no 607715/ Hair/ Schnider

Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 12 way with 200 Amps rated bus bar all as specified and directed .Make- legrand cat no 607718/ Hair/ Schnider

Supply and fixing MCB isolator SPN 40 Amp 240 V AC 10 KA repturing capacity all as specified. Make -Legrand, Hair, Schnider

Supply and fixing MCB 5 to 30 Amp 'C' series 10 KA repturing capacity complete all as specified. Make -Legrand , Hair, Schnider

Supply and fixing step socket type fan regulator 120/280 V all as specified. Make -Legrand, Cona/ SSK/Kinjal/Hair,

Supply and fixing single pole and neutral enclosure with a two pole and earth plug socket complete with one, single pole MCB 20 Amps 10 KA repturing capacity 240 Volts AC all as specified. Make -Legrand, Hair, Schnider

Taking down & Suply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sqmm 2 core starnded conductor complete all as specified.

Supply and fixing sub main wiring two single core 4 sq mm PVC insulated unsheathed stranded copper conductor cable ( FR ) 1100Volts grade drawn in & including rigid PVC casing/ caping /conduit 20mm dia or more medium grade surface/ concealed in wall as per existing along with 4.0 Sq mm PVC insulated unsheathed copper conductor cable (FR ) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion all as specified and directed

Supply and fixing Ceiling Fan 230 Volt, SP 1200 mm sweep ISI marked NEO BREEZE opal white of make Crompton or equivalent make in Bajaj / Havells and writing MES Number as per MES pattern complete all as specifid & as directed by Engr-in- Charge.

S&F exhaust fan plastic body 300 mm sweep complete with all fittings .Make- Bajaj/Havells/Raillys

M&L for earthing complete with galvanished steel earth plate electrode 600x600x6.0 mm thick buried directly in ground and earth pit not less than 2.25 mtr deep below NGL and top edge of the plate not less than 1.5 Mtr deep below NGL, surrounded with adequate qty of char coal dust mixed with salt to a packed thickness not less than 15 Cm on all sides of earth plate incl excavation, earth work, returning filling in , removal of surplus soil to a distance in n.exc. 50 mtr incl GI wire 4mm dia nut bolts etc to earth plate one end connected to continuous earth wire incl GI pipe watering light grade with CI funnel and wire mesh and PCC 1:2:4 type B-1 as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1 duly re-enforced with MS bar 6mm dia @ 150mm C/C both ways with 10mm dia MS bar lifting handles, all as described in electric plate No. 3 of SSR part-I complete all as specified and directed.

M.K Engineers

KAPOOR ELECTRICALS

Nanda Brothers