Balance work for construction of PWD Rest House Building at Thachi Tehsil Balichowki Distt Mandi SH C/o Building portion and septic tank and rain harvesting system

Amount

Excavation in foundation, trenches etc. in earth work in all kinds of classification of soils such as pick work, Jumper work, blasting work in soft and hard rock, conglomerated rock or saturated soil and its intermediate classification of soil, chieseling work and wedging out rock (where blasting is prohibited) and pumping or bailing out watering/dewatering upto any lift, stacking the excavated soil upto any lead from the edge of excavation and then returning the stacked soil in 15 cm (15mm) thies layer when required into plinth, sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals .

Providing and laying cement concrete 1:6:12 ( one cement : six sand : twelve graded stone aggregate 40mm.(Forty millimetre) mechanically mixed and curing complete excluding the cost of form work in foundation and plinth as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals.

Random rubble masonry/polygonal rubble masonry (Uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement: 6 Sand: 12 graded stone aggregate 20mm (twenty millimetre) nominal size at plinth level in cement mortar 1:6 (1 cement: 6 Sand) including curing and carriage of materials with in all leads lifts other incidentals or as per directions of the Engineer-in-Charge.

Squared rubble masonry coursed with hard stone of approved quality in superstructure including racking out joints and Curing complete in cement mortar1:6(one cement:6sand) including carriage of materials with in all leads and lifts and other incidentals as per directions of the Engineer-in-Charge.

2nd class brick work using common burnt clay building bricks in foundations and plinth in cement mortar 1:4(one cement:4sand) including carriage of materials in all leads lifts and other incidentals or as per directions of the Engineer-in-Charge.

Providing form work with steel plates 3.15mm (three point fifteen millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling upto any heights and removal of the same for in-situ reinforced concrete and plain concrete work in including carriage of materials in all leads and lifts and other incidentals as per directions of the Engineer-in-Charge. flat surfaces such as soffits of suspended floors,roofs, landings and the like floors etc. upto any in thickness.

circular or curved in plan complete in all respect.

Beams cantilevers girders and lintels sides and soffits beams haunchings ,cantilevers, bressumers and lintels any depth in all heights from floor. Complete in all respect.

vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters buttresses, plinth and string courses and the like.

Providing and laying cement concrete work 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work in ; including carriage of materials with in all leads, lifts and other incidentals or as per direction and satiesfaction of Engineer in charge suspended floor roofs .landings and shelves and their support balconies beams ,girders,bressumers and cantilver upto all floor level.

column,pillars posts and struts upto all floor level.

Stair cases (except spiral stair cases) excluding landing but including preparing of the top surface and finishing of nosing upto floor two level.

Walls (any thickness but not less then 0.10 meter thickness) including attached pilasters, buttresses, plinth and string courses etc. from top of foundation level upto all floor level.

Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire up to any level as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals.

25mm( twenty five mm) cement concrete flooring 1: 2:4 (one cement:two sand: four graded stone aggregate of size 12.5mm (twelve point five millimetre) and below laid over base concrete and finished with a floating coat of neat cement ( base concrete to be paid saparetely ) including curing and carriage of materials with in all leads lifts and other incidentals as per directions of the Engineer-in-Charge.

40( forty mm) cement concrete flooring 1: 2:4 (one cement:two sand: four graded stone aggregate of size 20mm and below ) laid in one layer finished with a floating coat of neat cement including curing and carriage of material and other incidentials with in all leads and lifts and as per the direction of the Engineer-in- charge.

Providing and fixing 40mm (forty mm) thick 2nd class deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enamlled iron butt hinges with necessary screws, including carriage of material and other incidentials with in all leads lifts and asc per the direction of the Engineer- in charge.

Providing and fixing 40mm(forty mm) 2nd class deodarc wood wire gauge shutters using galvanised M.S wire gauge of I.S gauge using designation 85G with wire of dia 0.56mm ( Zero point five six mm) for doors windows and clerestory windiows including bright finished black enamlled iron butt hinges with necessary screws , including carriage of material and other incidentials in all leads and lifts as per the direction of the Engineer- in charge.

Providing 2nd class deodar wood work in frames of false ceiling partitions etc. sawn and put-up in postion . Including carriage of material and other incidentials in allleads and lifts and as per the direction of the Engineer- in -charge.

Providing and fixing 12mm (twelve millimetre) thick prelaminated board both sides bwp phenol bonded exterior/ interior grade panelled shutters with frame of 1st class deodar wood for doors including bright finish/black enamelled iron butt hinges with necessary screws 40mm( forty mm) thick frame incuding carriage of material and other incidentials in all leads and lifts and asc per the direction of the Engineer- in charge.

Providing and fixing wooden plank ceiling with tongued and grooved jointing and wood screws (frame workand cover fiets to be measured and paid for separately) including carriage of matterial and other incidentials in all leads and lifts and asc per the direction of the Engineer- in charge.

Providing and fixing 12mm (twelve millimetre) thick and 150 mm (one hundred fifty) wide palmet with 25mm (twenty five millimetre) diameter wooden curtain rod and brackets including fixing with 25x3mm (twenty five into three millimetre) M.S. flat 10 cm (ten centimetre) long and plugs etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 25 mm (twenty five millimetre) thick commercial board water proof shutters for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of materials with in all leads, lifts and other incidentials as per directions of the Engineer-in-Charge.

Providing and fixing 19 mm (nineteen millimetre) thick water proof commercial board in shelves/box for cup boards with butt joints & fixing with nails & screws etc complete including entire carriage of materials in all leads, lifts and other incidentials as per directions of the Engineer-in-Charge.

38 mm (thirty eight millimetre) thick parquet ( wood block)flooring of 1st class indian teakwood laid over 25 mm ( twenty five millimetre) thick levelling layer of cement concreate1:2:4 (1 cement : 2 sand :4 stoneaggregate 10 mm (ten millimetre) nominal size ( tobe paid separately) coated with thinlayer ofhot bitumen (blown-type)@ 2.45 kg. per sq m. (two point four five kilogram per square metre) including fixing blocks in position afterdipping in hot bitumen ( blown type) upto half depth, planed,levelled smooth and finished complete including carriage of materials in all leads, lifts and other incidentials as per directions of the Engineer-in-Charge.

Extra for planing the lower surface of wooden planking

Extra for providing and fixing metal strips of 1.6 mm (one point six millimetre) thickness at junctions with other floors: 25mm (twenty five millimetre) wide aluminuim strips. Including carriage of matrials with in all leads, lifts and other incidentials

40 mm (fourty millimetre) Kota stone slab flooring 20mm (twenty millimetre) (average) thick base of cement mortar 1:4 (1 cement :4 sand ) laid over and jointed with grey cement slurry mixedwith pigment to match the shade of the slab, includingrubbing and polishing complete including carriage of materials with in all leads, lifts and other incidentials as per directions of the Engineer-in-Charge.

Providing and laying granite stone in flooring 20mm (twenty millimetre) (average) thickness base of cement mortar 1:3 (1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete 20mm (twenty millimetre) thick complete including carriage of materials with in all leads, and other incidentials lifts as per directions of the Engineer-in-Charge.

Providing and fixing 10mm (ten millimetre) thick antiskid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm (six hundred into six hundred into ten millimetre) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (twelve millimetre) thick cement mortar 1:3 (1cement : 3sand) jointed with cement slurry mixed with pigment tomatch the shade of tiles as required complete including entire carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and laying marble work (Table rubbed and polished) in flooring 20mm (twenty millimetre) thick base in cement mortar1:3(1cement:3sand) including jointing with cement mortar 1:2 (1 white cement:2 marble dust) with an admixure of pigment to match the shade of the marble 20 mm (twenty millimetre) thick Baroda green marble including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and laying spartic ceremic tiles 5.5mm (five point five millimetre) thick in flooring 300 x300mm (three hundred into three hundred millimetre) size treads of steps laid on a bed of 12mm (twelve millimetre) thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement including entire carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

White glazed tiles 6 mm (six millimetre) thick in skirting risers of steps and dado 12 mm (twelve millimetre) thick cement mortar 1:3(1 cement :3 sand) and jointed with cement slurry including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

6mm (six millimetre) cement plaster to ceiling In Cement mortar 1:3 (1Cement:3 Sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

20mm (twenty millimetre) Cement plaster in two coats,backing coat 15mm (fifteen millimetre) and finishing coat 5mm (five millimetre) thick on rough side of brick/stone masonry walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar1:4 (1cement:4 sand) including carriage of materials with in all leads, lifts as per directions of the Engineer-in-Charge.

20mm (twenty millimetre) cement plaster in two coats,backing coat 15mm (fifteen millimetre) and finishing coat 5mm (five millimetre) thick on rough side of brick/stone masonry walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement motrtar 1:6 ( 1 cement 6 sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

15mm (fifteen millimetre) cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth.Cement Mortar 1:4 (1Cement : 4 Sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 75 mm x 60mm (seventy five millimetre into sixty millimetre) rounded hand rails in straight length complete in 2nd class indian teak wood including carriage of materials in all leads, lifts and other incidentials as per directions of the Engineer-in-Charge.

Providing 40x3 mm (fourty into three millimetre) flat iron hold fast 40 cm (fourty centimetre) long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (thirty into ten into fifteen centimetre) 1:3:6 mix ( 1 cement :3 sand : 6 graded stone aggregate 20 mm (twenty millimetre) nominal size including carriage of materials with in all leads, and other incidentials lifts as per directions of the Engineer-in-Charge.

Providing and fixing 2nd class indian teak wood 25mm + 25mm (twenty five millimetre + twenty five millimetre) balusters 25mmx25mm (twenty five millimetre into twenty five millimetre) square wrought fixed with ends housed (square or splay) to hand rails and treads or strings complete including carriage of materials with in all leads, and other incidentials lifts as per directions of the Engineer-in-Charge.

Steel work welded in built up sections,trusses and framed work, including cutting , hoisting, fixing in position and applying a priming coat of red lead paint including carriage of materials with in all leads, and other incidentials lifts as per directions of the Engineer-in-Charge. In gratings framed guard bars,ladders, railling, brackets and similar works including carriage ofmaterials with in all leads, and other incidentials lifts as per directions of the Engineer-in-Charge.

In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like including carriage ofmaterials with in all leads, and other incidentials lifts as per directions of the Engineer-in-Charge.

Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20(twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron Jor L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet and rubber washers complete including carriage of materials with in all leads, and other incidentials lifts as per directions of the Engineer-in-Charge.

Providing and fixing ridges or hips 60 cm (sixty centimetre) overall with 0.60mm (zero point sixty millimetre) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty )microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm (six millimetre) dia & prepainted G.I. limpet and bitumen washers complete including carriage of materials with in all leads, and other incidentials lifts as per directions of the Engineer-in-Charge.

Applying priming coat over new woodand wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting readymixed paint brushing wood primer pink including carriage of materials with in all leads, and other incidentials lifts as per directions of the Engineer-in-Charge.

Painting two coats(excluding coat)on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping including carriage of materials with in all leads, and other incidentials lifts as per directions of the Engineer-in-Charge. with white paint

Readymixed paint other than white

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfacesto give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making thesurface including carriage of materials with in all leads, and other incidentials lifts as per directions of the Engineer-in-Charge.

Providing and fixing eaves board 200mmx25mm (two hundred millimetre into twenty five millimetre) thick including fixing in position in 2nd class deodar wood including carriage of materials with in all leads, and other incidentials lifts as per directions of the Engineer-in-Charge.

Providing and fixing bright finished brass sliding door-bolts with nuts and screws etc. complete including carriage of materials with in all leads, and other incidentials lifts as per directions of the Engineer-in-Charge. 300x15 mm (three hundred into fifteen millimetre)

200x15mm (two hundred into fifteen millimetre)

Providing fixing bright finished brass tower bolts (barrel type) with screws etc. complete including carriage of materials with in all leads, and other incidentials lifts as per directions of the Engineer-in-Charge. 250x10mm (two hundred fifty into ten millimetre)

200x10mm (two hundred into ten millimetre)

Providing and fixing bright finished brass handles with screws etc. complete including carriage of materials with in all leads, and other incidentials lifts as per directions of the Engineer-in-Charge. 125mm (one hundred fifty five millimetre)

100mm (one hundred millimetre)

Providing and fixing brass door latch with necessary screws etc. complete including carriage ofmaterials with in all leads, and other incidentials lifts as per directions of the Engineer-in-Charge.

Providing and fixing PVC water tank of superrior quailty having 1000 litre (one thousand liters) capacity with necessary fitting including locking arrangment incliding pads of required size of inlet and outlet inside paint after inlet and outer and inside paint superior quality complete including carriage of materials with in all leads, and other incidentials lifts as per directions of the Engineer-in-Charge.

Providing and fixing 15 mm nominal size to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor including carriage of material and other incidentials in all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and laying in trenches, galvanisedmild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid separately) 20mm (twenty millimetre) dia including carriage of material and other incidentials in all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing sand cast / cast iron spun spigot and socket soil, waste and ventilating pipes (Lead caulked joints to be measured and paid for separately 75mm (seventy five millimetre) nominal size including carriage of material and other incidentials in all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing on wall face C.I.rain water pipes including filling the joints with spun yarn and cement mortar 1:2 (1 cement :2 sand) 100 mm (hundred millimetre) dia pipe including carriage of material and other incidentials in all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1:2 (1 cement :2 sand) 100 mm (hundred millimetre) diametre including carriage of material and other incidentials in all leads and lifts and as per the direction of Engineer-in-Charge.

Providing plinth protection 50mm (fifty millimetre) thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm (twenty millimetre) nominal size) including carriage of material and other incidentials in all leads and lifts and as per the direction of Engineer-in-Charge.

Providing under layer for plinth protection of 75mm (seventy five millimetre) thick (unconsolidated) bed dry brick/stone aggregated 40mm (fourty millimetre) nominal size with rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material and other incidentials in all leads and lifts and as per the direction of Engineer-in-Charge.

Constructing course rubble dressed "U" shape open surface drain with side wall 15X22cm (fifteen into twenty two) in cement mortor 1:6 (one cement: six sand) and in side plstring with cement plaster 1:3 (one cement : three sand ) including earth work and laying 10cm (Ten Centimetre) cement concrete 1:5:10 (one cement :five sand:ten graded stone aggregate 40mm (Forty millimetre) nominal size) and 7.5cm (seven point five centimetre) cement concrete 1:2:4(one cement :two sand ;four graded stone aggregate 20mm (Twenty millimetre) nominal size) and finishing with a floating coat of neat cement and curing complete as per standard design including carriage of material and other incidentials in all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing 100 mm (hundred millimetre) nominal size sand cast / cast iron spun fittings and accessories with oval access door , insertion rubber washer 3mm (three millimetre) thick bolts and nuts complete including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Supplying cast iron cover without frame for manholes For frame of internal dimension 455mmx610mm (four hundred fifty five millimetre into six hundred ten millimetre) rectangular C.I. Cover (light duty single seal pattern-1) the weight of cover to be not less than 23kg (twenty three kilogram)including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and laying 100mm (hundred millimetre) dia PVC pipe including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing sand cast/cast iron spun spigot and socket soil, waste and ventilating pipes (Lead caulked joints to be measured and paid for separately) complete including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing cast iron folder bets including steel bolt to sand cast iron pipes embaded in and including cement concrete block 100x100x100mm (hundred into hundred into hundred millimetre) of 1:2:4 ( one cement: 2sand:4 graded stone aggregate 20 mm nominal size ) other including carriage of marterial and incidentials in all leads and lifts as per directions of the Engineer-in-Charge. 75mm (seventy five millimetre) nominal size

100mm (one hundred millimetre) nominal size

Providing and fixing sand cast iron/cast ironspun fittings and accessories Bends of required degree (any radius)I With oval access door insertion rubberwasher 2mm (two millimetre) thick, bolts and nuts complete including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge. 75mm (seventy five millimetre) nominal size

100mm (hundred millimetre) nominal size

(plain bends) 75mm (seventy five millimetre) nominal size

100mm (hundred millimetre) nominal size

Single equal branch of requiredwith oval access door insertion rubber washer 3mm (three millimetre) thick bolts and nuts complete . 75mm (seventy five millimetre) nominal size

100mm (one hundred millimetre) nominal size

Double equal branch of required With oval access door insertion rubberwasher 3mm (three milimetre) thick bolts and nuts complete 100mmx50mmx50mm (one hundred millimetre into fifty millimetre into fifty millimetre) nominal size

75mm (seventy five millimetre) nominal size

100mm (hundred millimetre) nominal size

cast iron cowl 75mm (seventy five millimetre) nominal size

100 mm (one hundred millimetre) nominal size.

Providing lead caulked joints to sand cast/cast iron (spun) iron pipes fittings including testing of joints complete including carriage of marterial and incidentials in all leads and lifts as per directions of the Engineer-in-Charge. 75mm (seventy five millimetre) nominal size

100mm (one hundred millimetre) nominal size

Providing and fixing 75 mm (seventy five millimetre) nominal diametre cast iron floor trap of self-cleaning design with sand cast iron screwed down or hinged grating without vent arm complete including cost of cutting and making goods the walls and floors complete including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately) including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge. Angle Indian Universal closet

Ordinary closet

Providing and fixing 10.00/12.50 liters (ten / twelve point fifty liters) vitress china low level flushing cistern with a pair of C.I. or mild steel brackets, complete with fitting such as lead valve less syphon, 15mm (fifteen millimetre) nominal size brass ball valve with polythene float, C.P. Brass handle unions and couplings for connections with inlet, outlet and overflow pipes, 40mm (fourty millimetre) dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow) pipe to be measured and paid for separately) complete including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing G.I. inlet connection for flush pipe with W.C. pan complete including carriage of marterial and incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing plastic seat (Solid type) and cover for wash down water closetwith C.P. Brass hinges and rubber buffers coloured plastic seat and cover including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing flat back 550mmx400mm (five hundred fifty millimetre into four hundred millimetre) vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings complete including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 600mm x 450 x 150 mm (six hundred millimetre into four hundred fifty into one hundred fifty millimetre) kitchen sink with C.I. Or M.S brackets, painted white including cutting holes in walls and making good the same but excluding fittings complete including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 32mm (thirty two millimetre) dia rubber plug for sink /wash basin including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 32mm (thirty two millimetre) dia C.P. Brass waste for wash basin or sink including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 32 mm (thirty two millimetre) M.I. Union for wash basin or sink including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 32mm (thirty two millimetre) dia, lead waste pipe for wash basin or sink including brass check nut complete including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 600mm x 450mm (six hundred millimetre into four hundred fifty millimetre) bevelled edge mirror of superior glass mounted on 6mm (six millimetre) thick A.C washers including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P brass 600 mm x 20 mm (six hundred millimetre into twenty millimetre) complete including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 600 mm x 120 mm (six hundred millimetre into one hundred twenty millimetre) glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P. Brass screws complete including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing toilet paper holder C.P. Brass including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 100mm (hundred millimetre) dia C.P. Brass shower rose with 15mm (fifteen millimetre) or 20mm (twenty millimetre) inlet including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 15mm (fifteen millimetre) dia c.p brass bib tap with capstan head including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 15mm (fifteen millimetre) dia c.p brass pillar tap with capstan head including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 15 mm (fifteen millimetre) brass stop cock including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing bath shower including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 20mm (twenty millimetre) brass full wayvalve with wheel including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing G.I/M.I. Union following size ( where not including in the items ) including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge. 15mm (fifteen millimetre) dia

20mm (twenty millimetre) dia

Constructing manhole with RCC top slab in 1:2:4 mix in (1 cement : 2 sand : 4 graded stone aggregate 20mm (twenty millimetre) nominal size foundation concrete1:4:8 (1cement : 4 sand : 8 graded stone aggregate 40mm (fourty millimetre) nominal size inside plastering 15mm (fifteen millimetre) thick with cement mortar 1:3 (1cement 3 sand) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm (twenty millimetre) nominal size) finished smooth complete including curing and testing Inside size 800mm x 800mm (eight hundred millimetre into eight hundred millimetre) and 500mm (five hundred millimetre) deep including C.I cover with frame. (Light duty single seal pattern - 1) 455 mmx610mm (four hundred fifty five millimetre into six hundred ten millimetre) internal dimensions total weight of cover and frame to be not less than 38kg (thirty eight kilogram)(Weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg (fifteen kilogram)with 300mm (three hundred millimetre) thick walls of squared rubble masonry coursed with hard stones of approved quality in cement mortar 1:3 (1cement 3 sand) complete including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (1 cement : 5 sand ) C.I. Cover with frame (light duty ) 355mm x 610mm (three hundred fifty five millimetre into six hundred ten millimetre) internal dimensions total weight of cover with frame to be not less than 38kg (thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram) and weight of frame15kg (fifteen kilogram) R..C.C top slab with 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm (twenty millimetre) nominal size ) foundation concrete 1:5:10 (1cement : 5 sand : 10 graded stone aggregate 40mm (fourty millimetre) nominal size) inside plaster 15mm (fifteen millimetre) thick with cement mortar 1:3 (1 cement : 3 sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete including carriage of marterial and other incidentials in all leads and lifts as per directions of the Engineer-in-Charge.

LEKH RAJ