Fabrication Work of various Materials for HT/LT Line under Jurisdiction of Valsad City Division.

SCHEDULE- B FOR FABRICATION WORKS OF HT-LT LINE MATERIALS

Code Name of Item

Number Qty Unit Rate.Rs. Amts.Rs.

Fabrication of Anchor Rod from 16 SQ.mm MS

Round bar & 65 mm x 65 mm x 6 mm M.S. angle

as per approved drawing and requirement of the

Fabrication of Anchor Rod from 16 SQ.mm MS

Round bar & 50 mm x 50 mm x 6 mm M.S. angle

as per approved drawing and requirement of the

Fabrication of Eye Bolt from 16 SQ.mm MS Round

bar with supplying of 2 (two) nuts of suitable size

as per approved drawing and requirement of the

Fabrication of Turn Buckle from 16 SQ.mm MS

Round bar & 65 mm x 65 mm x 6 mm mm M.S.

angle as per approved drawing and requirement

of the company. No.

Fabrication of Turn Buckle from 16 SQ.mm MS

Round bar & 50 mm x 50 mm x 6 mm M.S. angle

as per approved drawing and requirement of the

Fabrication of 11' (feet) long Top/Bottom/D.O.

angle from 65 mm x 65 mm x 6 mm M.S. angle as

per approved drawing and requirement of the

Fabrication of 9' (feet) long Top/Bottom/D.O.

angle from 65 mm x 65 mm x 6 mm M.S. angle as

per approved drawing and requirement of the

Fabrication of 4'6" (feet) long Tapping / bracing

angle from 65 mm x 65 mm x 6 M.S. angle as per

approved drawing and requirement of the

Fabrication of 2'3" (feet) long bracing/ support

angle from 65 mm x 65 mm x 6mm M.S. angle as

per approved drawing and requirement of the

Fabrication of 11KV HT 'V' Cross Arm from 65 mm

x 65 mm x 6 mm M.S. angle as per approved

drawing and requirement of the company.

Fabrication of 11KV HT Top fitting from 65 mm x

65 mm x 6 mm M.S. angle and 50mm x 6 mm M.S.

flat as per approved drawing and requirement of

the company. No.

Fabrication of 22KV HT Top fitting from 65 mm x

65 mm x 6 mm M.S. angle and 50mm x 6 mm M.S.

flat as per approved drawing and requirement of

the company. No.

Fabrication of 22KV HT 'V' Cross Arm from 65 mm

x 65 mm x 6 mm M.S. angle as per approved

drawing and requirement of the company.

Fabrication of Guy Clamp pair suitable for PSC pole

from 50mm x 6 mm M.S. flat as per approved

drawing and requirement of the company.

Fabrication of 'U' Clamp from 50mm x 6 mm M.S.

15 9910000024 flat as per approved drawing and requirement of

the company. No.

Fabrication of 'C' clamp suitable for PSC pole from

16 9910000043 50mm x 6 mm M.S. flat as per approved drawing

and requirement of the company. No.

Fabrication of ‘C’ clamp suitable for RSJ GIRDER

pole from 50mm x 6 mm M.S. flat as per approved

drawing and requirement of the company.

Fabrication of Three hole patti from 50mm x 6 mm

18 9910000056 M.S. flat as per approved drawing and

requirement of the company. No.

Fabrication of 11' (feet) long Top/Bottom channel

from 100 mm x 50 mm x 5 mm M.S. channel as per

approved drawing and requirement of the

Fabrication of 9' (feet) long Top/Bottom channel

from 100 mm x 50 mm x 5 mm M.S. channel as per

approved drawing and requirement of the

Fabrication of 11'(feet) long angle bracing from

mm x 50 mm x 6 mm M.S. angle as per approved

drawing and requirement of the company

Fabrication of 9'(feet) long angle bracing from

mm x 50 mm x 6 mm M.S. angle as per approved

drawing and requirement of the company

Fabrication of 11' (feet) long channel welded from

assorted length of scrap channel as per approved

and requirement of the company

Fabrication of 9' (feet) long channel welded from

assorted length of scrap channel as per approved

and requirement of the company

Fabrication of Guy Clamp pair suitable for 10 mtr

PSC pole from 50mm x 6 mm M.S. flat as per

approved drawing and requirement of the

Fabrication of Guy Clamp pair suitable for 9/11mtr

RSJ GIRDER pole from 50mm x 6 mm M.S. flat as

per approved drawing and requirement of the

Fabrication of 5' (feet) long Tapping angle from

mm x 65 mm x 6 mm M.S. angle as per approved

drawing and requirement of the company.

Fabrication of H.T. Ext'n suitable for 22KV system

from 65 x 65 x 6 mm M.S. angle as per approved

drawing and requirement of the company.

Fabrication of H.T. Ext'n suitable for 11KV system

from 65 x 65 x 6 mm M.S. angle as per approved

drawing and requirement of the company.

Fabrication of 750 mm long Channel for HT AB

conductor from 100mm x 50mm x 5mm M.S.

Channel as per approved drawing and

requirement of the company. No.

Fabrication of 22KV HT "V" Cross Arm from

100mm x 50mm x 5mm M.S. Channel as per

approved drawing and requirement of the

TOTAL AMOUNT RS.

TOTAL AMOUNT RS.

IN WORDS-TEN LACS ONLY

EXECUTIVE ENGINEER(O&M)

VALSAD CITY DIVISION

1. All fabricated items shall be fabricated by using welding rods confirming to the relevant ISI specifications and as directed by

Engineer In-charge.

2. All fabricated items shall be painted with good quality (ISI Marked) of red oxide paint.

3. Necessary electricity connection shall be provided by DGVCL on payment of required charges for connection & electiricity

bill of the same shall be paid by the contractor.

4. The rates are inclusive of PF & Works Contract Tax and Exclusive of GST

5. 11 KV 'V' Cross Arm should be fully welded on both side as per ins. Of EIC.