REPAIR/MAINT OF INTERNAL ELECTRIFICATION OF AUDITORIUM, SWIMMING POOL, OTHER MES INSTALATIONS, OTM ACCN AND MES MD ACCN AT ARMY AREA JODHPUR UNDER GE (A) UTILITY JODHPUR

Amount

Taking down carefully point wiring from existing place (light/fan, socket or power points complete) with all fittings such as switches, sockets ceiling rose, pendant holder, fitting and fixtures, MCB DB’s, MCB, Main switches, call bell etc and making good to disturbed surface to wall, floor etc to match with existing surface either by using same colour distemper or white/colour wash complete all as specified and as directed.

Taking down care fully by unscrewing from boards/out let boxes, fittings and fixtures such as tube, light fitting of any type, MCB DB etc., complete all as specified and as directed. Note: - This item to be operated only when item found serviceable for reuse in work.

M&L for point wiring with PVC FRLS insulated and unsheathed copper stranded conductor cable of size 1.5 Sqmm, 1100 V drawn in and including PVC casing and capping complete including cast iron/pressed steel terminal box 1.6 mm thick of required size, Bakelite sheet 3mm thick or PVC box with cover for surface mounting of suitable size for mounting switch, socket brass screws and washer including PVC insulated and unsheathed solid copper wire of size 1.5 Sqmm as continuous earth wire complete all as specified and as directed for the following:-

One light/fan point controlled by one way switch

One 5/6 Amp socket on the same board

One 5/6 Amp socket on independent board.

One 3 pin 15 Amp socket independent but with 2.5 Sqmm PVC insulated unsheathed copper stranded conductor and earth wire with 1.5 Sqmm PVC insulated unsheathed copper stranded conductor

One bell point controlled by one way bell push button.

One light point controlled by 2 way switch

All as per item No. 3 Above but drawn in existing concealed non metallic PVC conduit medium grade for the following:-

One light/fan point controlled by one way switch.

One 3 pin 5 Amp socket on the same board

One 3 pin 5 Amp socket on independent board

One 3 pin 15 Amp socket independent but with 2.5 Sqmm PVC insulated unsheathed copper stranded conductor and earth wire with 1.5 Sqmm PVC insulated unsheathed copper stranded conductor

One bell point controlled by one push button switch.

Fixing only any type of Tube light fitting obtained from Item No. 2 above Including making connection to ceiling rose /connector with copper flexible cable of size 1.5 sqmm all as specified and directed

S&F in replacement switch, piano type, flush type, 240 V, 5 Amp, SP, one way fixed in new or existing points complete all as specified and as directed

S&F in replacement switch, piano type, flush type, 240 V, 5 Amp, SP, two way fixed in new or existing points complete all as specified and as directed

S&F in replacement bell push, piano type, flush type, 240 V, 5 Amp, SP, one way fixed in new or existing points complete all as specified and as directed

S&F in replacement socket outlet, 5 pin, 5 Amps, flush type fixed in new or existing points complete all as specified and as directed

S&F in replacement of switch socket outlet combination, 3 pin, 15 Amp and 3 Pin 5 Amp out let, flush type (non shuttered) complete all as specified and directed

S&F in replacement ceiling rose surface backelite, 65 x 20 mm three terminal complete all as specified and directed.

S&F in replacement of lamp holder PVC/Polycarbonate type with cord grip cap suitable for pendant fitting cased body with back plate complete all as specified and directed.

S&F in replacement of modular switch, flush type, 1 way, 6 Amp, 1 module, 240 V complete all as specified and directed.

S&F in replacement of modular switch, flush type, 1 way, 16 Amp, 1 module, 240 V complete all as specified and directed.

S&F in replacement of modular bell push, flush type, 1 way, 6 Amp, 1 module, 240 V complete all as specified and directed.

S&F in replacement of modular socket, 6A-2/3 pin combined, 2 module, 240 V complete all as specified and directed.

S&F in replacement of modular socket, 6/16 Amp, 2/3 pin combined, 2 module, 240 V complete all as specified and directed.

S&F in replacement of modular fan step regulator, 120 W, 2 module, 240 V complete all as specified and directed.

S&F in replacement of modular white cover plate with frame, 3 module, including box complete all as specified and directed.

S&F in replacement of modular white cover plate with frame, 4 module, including box complete all as specified and directed.

S&F in replacement of modular white cover plate with frame, 6 module, including box complete all as specified and directed.

S&F in replacement of modular white cover plate with frame, 8 module, including box complete all as specified and directed.

S&F in replacement of modular blank cover plate with frame complete all as specified and directed.

S&F in replacement of sheet metal enclosure for MCB DB, TPN, double door type, 4 way with 200 amps rated Bus bar including suitable size of ply board for fixing of DB complete all as specified and directed.

S&F sheet metal enclosures for MCB DB, SPN, double door type, 8 way with 200 amp rated bus bar and suitable for SPN MCB as incomer including suitable size of ply board for fixing of DB complete all as specified and directed.

S&F sheet metal enclosures for MCB DB, SPN, double door type, 12 way with 200 amp rated bus bar and suitable for SPN MCB as incomer including suitable size of ply board for fixing of DB complete all as specified and directed.

S&F sheet metal enclosures for MCB DB, SPN, double door type, 6 way with 200 amp rated bus bar and suitable for SPN MCB as incomer including suitable size of ply board for fixing of DB complete all as specified and directed.

S&F MCB, TPN, 63 Amp, 4 pole, 415 Volt, C curve fixed in existing or in new DBs complete all as specified and directed.

S&F MCB, SPN, 40 to 63 Amp, 240 Volt, C curve fixed in existing or in new DBs complete all as specified and directed.

S&F MCB, SP, upto 40 Amp, 240 Volt, C curve fixed in existing or in new DBs complete all as specified and directed.

S&F MCB, SP, 6 to 32 Amp, 240 Volt, C curve fixed in existing or in new DBs complete all as specified and directed.

S&F in replacement of bell electric, 240 Volt, single pole complete all as specified and directed.

S&F in replacement of regulator, electronic type, 240 Volt, single phase suitable for ceiling fan stepped type complete as specified and directed.

S&F in replacement of modular fan regulator 120 W, 2 module, 240 Volt, single phase suitable for ceiling fan complete as specified and directed.

S&F in replacement of capacitor 2.5 MFD, 240 volts suitable for ceiling fan 1200/1400 mm sweep complete as specified and directed.

S&F LED tube light fitting, mirror type with high out put diffuser 2 feet, 10 watts, 220 V, AC decorative type with driver holder and LED light including connecting up with three core flexible copper conductor cable of suitable size complete as specified and directed.

M&L for sub main wiring with two runs of single core 4 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable, LT, 1100 grade, FRLS cable drawn in and including PVC casing capping with all necessary fittings and accessories and one run of PVC insulated and unsheathed single core cable with copper conductor of size 2.5 Sqmm as earth wire (green in colour ) run through and connected to common earth dolly including taking out the old sub main wiring complete all as specified and as directed. Note:- Two run of cable, one run of PVC conduit/casing capping and one run of earth continuity wire shall be measured and paid as one run

M&L for sub main wiring with two runs of single core 6 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable, LT, 1100 grade, FRLS cable drawn in and including PVC casing capping with all necessary fittings and accessories and one run of PVC insulated and unsheathed single core cable with copper conductor of size 4 Sqmm as earth wire (green in colour ) run through and connected to common earth dolly including taking out the old sub main wiring complete all as specified and as directed. Note:- Two run of cable, one run of PVC conduit/casing capping and one run of earth continuity wire shall be measured and paid as one run

S&F in replacement of industrial type metal clad plug top & socket, single pole and a natural link earth enclosure with one MCB, SP, 20 Amp complete all as specified and directed.

S&F in replacement of PVC rectangular block for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover of size 100mm x 100mm and 50mm deep including fixing arrangements complete all as specified and directed

S&F in replacement of PVC rectangular block for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover of size 175mm x 100mm and 50mm deep including fixing arrangements complete all as specified and directed

S&F in replacement of PVC rectangular block for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover of size 200mm x 150mm and 50mm deep including fixing arrangements complete all as specified and directed

M&L for earthing complete with galvanized steel earth plate electrodes 600mmx600mmx6 mm thick buried directly in ground earth (earth pit not less 2.25 m deep below ground level) with top edge of the plate not less then 1.5 mtr below normal ground level connected to galvanised iron earthing lead wire 4mm dia by means of bolt nuts check nuts and washers of galvanized iron or steel all as specified & shown in electrical plate No.3 of MES SSR part-I 2009 connected to earth test point as specified and testing on completion including provision of 20 mm dia light grade pipe up to 7.5 mtr length as protection & watering pipe shall be 20 mm bore medium grade including all excavation & earth work in any type of strata, PCC pit in 1:3:6, type C-1 with RCC cover, charcoal , salt, funnel etc complete all as specified and as directed.

M&L for repairing of wall mounted fan of any sweep including rewinding, fixing/replacement of spare arrangements, greasing, cleaning of the fan and fixing it back at the removed location complete all as specified and directed

S&F in replacement of one bakelite sheet not less than 3 mm thick after removing all connection including cutting/chasing to accommodate existing fitment and making connection including chromium plated screws with cup washer etc complete all as specified and directed

S&F in replacement of LED step lights of 2 watt CW/WW complete all as specified and directed

S&F in replacement of LED strip lights of 20 watt of required colour complete all as specified and directed

S&F LED luminaire 600mm x600 mm, 35/36 watt, 220 V, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed

S&F round shape 6 watt, 220 volts, AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

S&F round shape 15 watt, 220 volts, AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

S&F in replacement of LED luminaire 36/40 W, 230 volts, 50 HZ mounted with diffuser of size '1x4' approx. with accessories and connecting up complete all as specified and directed

S&F Post top lantern LED type, 40 watt, 230 volts, AC, outdoor type with decorative post top for 360 degree indirect light, IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed

vinayandsons