Restoration of 1x15 Mtr Span Bridge at Nowbal on Khudwani Nowbal Arwani road

arth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : including diverting of nallah and dewatering of foundation trenches during the execution of work complete

Providing and laying stone soling dully hand packed in maintaning level and section including carriages of all materials complete

Providing and laying in position cement concrete 1:4:8 ((1 Cement:4 Corase sand: 8 grade stone aggregate 40 mm nominal size crushed including curing but excluding the cost of centring and shuttering. All work upto plinth level.

Providing and laying in position specified grade of reinforced cement concrete 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level.

Reinforced cement concrete 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) work in for suspended floors upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.

Providing /laying in position Reinforced cement conc: 1:2:4 (1¨Cement:2 Course sand: 4 graded stone agg: 20mm size (Crushed). incld curing excld: the cost of Centering and shuttering

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. Inculding all carriages complete

Centering and shuttring including strutting, propping, etc. and removal of form work for

Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc.

Rewlding charges of existing structural steel for railing and cheqirred plates as per direction of EIC complete

Providing and fixing of weep holes PVC 100mm in proper gradient incld: all carriages

Providing /fixing of Crate work with Nallah stones from approved source incld hand packing of stones, cost of stones incld cost / tightening of crates ( woven G.I crates 100mm x 100mm mesh size )and weight not less than 54 kgs per crate incld cost and all carriages crates involved, complete job.

Providing and laying River Bed Material ( RBM) with specifed size (75-90mm)including sorting , spreading in uniform layers on existing surface and consolidation each deposited layer with Vibrator Roller to the required gradient and camber with all carriages to site of work including loading and unloading complete

Coursed Rubble Masonry with hard stone in foundation and plinth and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse Sand)

Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) Flush/Ruled Pointing

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture

Providing, laying, spreading and compacting 75 mm thick graded stone aggregate (size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge including all leads, lifts, loading, unloading carriage of all materials Complete

Providing and applying tack coat using hot straight run bitumen of grade VG-10, including heating the bitumen,spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specification etc. on WmM @ 0.75kg/Sqm including all carriages

Providing and laying 50mm thick bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer in charge. 50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Batch /Drum Type Hot Mix Plant of 100-120 TPH /60-90 TPH capacity Complete.

Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 25 mm compacted thickness with bitumen of grade VG 10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch /Drum Type Hot Mix Plant of 100-120 TPH /60-90 TPH capacity Complete.

Providing and laying seal coat of premixed fine agg. (Passing 2.36mm and retained on 180 micron sieve) with bitumen using 128 Kgs, of bitumen of grade VG - 10 bitumen per Cum of fine aggregate and 0.60 Cum of fine aggregate per 100 Sqm of road surface including rolling and finishing with road all complete Incld: all carriages

Carriage of materials from source to site of work incld. Loading unloading complete by Mechanical Transport

Stone aggregates /sand for an average lead of 15 kms