Construction of Twin D Type Qtr at R.W. Division, Bonai for the year 2025-26-Building

Earth work in excavation in foundation in hard with initial leads and lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour and T&P and dewatering if required for the work etc. complete

Filling foundation and plinth with sand well watered & rammed with cost, conveyance, royality, taxes etc. complete.

Cement concrete (1:3:6) with 4cm size hard granite metal including cost, conveyance,royality,taxes,watering and curing etc. complete.

RCC wok of M-20 grade with 20mm downgraded size hard granite chips including hoisting and laying A)column base

B)Columns & Beams

C) Plinth band

D) Lintel

E) Chajja

F) Roof slab

G) Shelves

Supplying ,fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.

Brick work withFly Ash bricks having crusing strength between 75kg/cm2 in cement motar (1:6) with cost,coveyance,royality watering&curing etc. complete. A) In foundation

B) In Superstructure

16mm thick cement plaster (1:6) over brick work with cst of all materials and all labour etc.

12mm thick cement plaster (1:6) over brick work with cst of all materials and all labour etc.

Supplaying, fitting & fixing vertrifed tiles of size 600mmx600mmx10mm of in floors, treads or steps and landing on 25 mm thick bed of cement mortar 1:1 (1 cement: 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubing and polishing with cost,coveyanceof all materials etc. complete.

Fixing tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete including cost of precast tiles.( Ceramic Tiles )

Finishing walls with weather coat paint of approved shade on new work two coat to give an even shade inculding cost of paint.

Finishing wall surface of walls with Acrylic wall puty ( Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding & staging charges with cost of all matyerials taxes, labour T & P etc complete.

Finishing walls with wall cement primer of water bound of approved shade on new work two coat to give an even shade inculding cost of primer.

Wall painting two coat with plastic emulsion paint with cost of plastic emulsion paint and labour etc.

Providing, fitting & fixing of 30mm Flush door with single shutter made of ( Mayur Timtickch India Ltd. ) with all fitting like door closer, door stopper, alluminium door hinges, friction stay, alluminium screews, handle with lock (Brass), with all labours & cost of all materials etc. complite.

Supplying ,fitting ,fixing fully glazed aluminum framed Sliding window using 15 micron anodized aluminum section 2082 as out section,9139 as mullion section,4124 as a shutter section frame with tapered clip of section 4125, aluminum angle, rubber beading, friction stay and handle etc with 5mm black glass.

Supplaying, cost & convaynce of M.S. Grill Door, Window grills & collapsible Gate

Painting two coat with any approved paint over a coat of primer to Doors & Windows with cost of primer,paint & labour.

Supplying ,fitting ,fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32x32x2mm @0.90 mtr. C/C and stainless square pipe bracing of size 32x32x2mm in 3 rows in stair case as per approved design and specification, buffing , polishing etc with cost, conveyance, taxes of alll materials, labour, T&P etc required for the coplete in all respect.

Cement concrete ( 1 : 2: 4) using 12 mm size HG CB chips incuding laying lowering concrete, wartering and curring & cost carriage royalty and taxes of all materials etc.

Recessed wiring to light point/fan point/exhaust pont/call bell pont with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire - Polycab/Finolex/ L&T / Anchor / Havells / V Guard/ KEI/ Great White) Modular Type -do- (Gr.A) (1.1.1-1.24.2)

-do- (Gr.B) (1.1.2-1.24.2)

-do- (Gr.C) (1.1.3-1.24.2)

S/F of M.S. Box for 2 Module 18 swg

S/F of M.S. Box for 4 Module 18 swg

S/F of M.S. Box for 8 Module 18 swg

S/F of M.S. Box for 12 Module 18 swg

S/F of 3 pin 5/6 A.F.T switch and.Socket on existing board (Modular type) (1.25.1+1.25.4)

S/Fof 6 module M.S. Box with Bakelite cover (Modular Type) on surface or in recess including providing and fixing of 2 nos 3 pin 5/6 amp. Socket out let 5/6amp. Piano type modular switch,connection,painting etc. as required (1.24.4 +2 x (1.25.1+1.25.4)

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required(1.24.2+1.25.5+1.25.5)

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required(1.24.2+1.25.5+1.25.5) for Invertor Connection.

S/F of computer board consisting of 3 nos. of 5 amp modular plug and modular switch and 1no. Of 6 amp Mini MCB, complete with wiring on 12 modular type M.S.box with modular cover.

Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Polycab/Finolex/L&T/Anchor/Havels/V-Guard/KEI/Great White).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8.1)

-do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2)

-do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3)

-do- 2x6 sqmm + 1 x 2.5 sqmm (1.8.3)

Inverter wiring (1x1.5smm) Copper wire (1.19.1)

S/F of A.C.Starter 20Amp with 2 module Box.(Make Havells/Anchor/Equivalent)

S/F of 15A Socket on 2 module for AC

S/F of 2 Modular box with 5A modular Socket outlet of ISI marked on Separate board for Wall fan

S/F of 5 to 32 Amp rating 240 Volt "B" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1)

S/F of MCB 8 Way Double Door (2.3.6)

S/F of MCB 4 Way Double Door (2.3.5)

S/F of 32 Amp rating "C" Series DP MCB (Make: L&T/Havells/C&S/Equivalent)

S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 )

S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30)

S/F of batten holder BK angle holder ISI marked including connection etc. insulated of ceiling rose(1.29- 1.28)

Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2 +3.3)

Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17)

S/F of Fan hook S, Type on ceiling.

S/F of step type modular fan regulator

S/F of 12 Watt LED Bulb(Make Havells/Polycab or Equivalent)

Supply, Installation, Testing and commissionioning of 300mm sweep exhaust fan in the existing opening, including making the hole to suit the size of the above fan making good the damaged comlete, connection,etc. as required.(1.43)(Make: usha/polycab/crompton/havells/anchor/orient)

S/F fo 1200mm A.C.Cilling fan(1 star) without regulator including all conections (Model: Usha (Striker NEO HS)/Polycab Vital HS/ Crompton (hs)/ havells samrat ES/Orient (Blitz)/ Anchor-Turbo Speed)/great white (Aldous)

S/F of 18-25W LED Tubelight fillting with all accessories and connection (Make : Crompton / HPL / Havells / Polycab / PAC

Supply & Fixing of 60 Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells)

S/F OF 900 VA Invertor with 1 no 180Ah Battery with trolly arrangement(Luminous/Microtek/Excide/V Guard)

S/F of 10W LED Bulk Head(Make -Havells/Crompton/Equivalent)

S/F of 400mm A.C. wall fan with all accessories (Make:Usha-Max air ultra/Polycab-Aery HS/Crompton-wmhiflo wave /Havels-Accelero HS/Anchor-Altrix HS/Orient- Wall 43/ Great white- WYNO Pro HS)

Supplying all materials,labour,T&P and fitting & fixing of 4.0 kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C.(a)110mm dia PVC pipe

(b)110mm dia PVC 'P' trap

(c)110mm dia.PVC D/J/D

(d)110mm dia.PVC H.R.Bend

(e)110mm dia.PVC Door bend

(f)110mm dia.PVC plain Bend

(g)110mm dia.PVC Tee

(h)110mm dia PVC offset

(i)110mm dia PVC Cowl

(j)125mm dia CP greatings

Supplying all materials,labour,T&P and cutting holes through brick/stone masonry walls for taking PVC pipes and fittings including making good the damages etc. all complete as per the P.H specification and direction of E.I.C.(a)375mm thick wall

(b)Roof cutting

Supplying all materials,labour,T&P for fixings watercloset,squattingpan(IWC pan/Orissa pattern squatting pan)dullyembedded in cc(1:5:10)using 4cm hg metal all complete as per the direction of E.I.C.(a)580mmx440mm size Orissa Pan(White)(Parry ware)

Supplying all materials,labour,T&P and fixing wash down water closet (EWC)with integral 'S' or 'P' trap to the floor with wooden plug and CP screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C.(Parry ware/Hind ware)

Supplying all materials,labour,T&P and fixing of plastic seat cover for EWC with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C.

Supplying all materials,labour,T&P and fixing wash basin with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in walls and good the damages etc. all complete as per specification and direction E.I.C.(a)550mmx400mm size WHB(Parry ware)with 32mm dia c.p. west,west pipe and brackets.

(b)Pedestrial for W.H.B(make- parryware)

supplying all labour,T&P materials & fixing wash Kitcken Sink with CI/MS Brackets painted white including holes in walls and making good the damages etc. all complete as per PH specification and direction of E.I.C.(a)610mmx 510mmx200mm Steel sink with 40mm dia c.p. west,west pipe and brackets.

Supplying all materials,labour,T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specifications and direction of E.I.C.(a)CP Soap holder

Supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C.(a)600mmx450mm B.E.Mirror

Supplying all materials,labour T&P and fixing standard size glass shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per PH specification and direction of E.I.C.(a)(125x600)mm size glass-shelf with CP Guard rail

Supplying all materials,labour,T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of E.I.C.(a)25mmx600mm long CP towel rail

(b)CP Towel Ring

Supplying all materials,labour T&P and fitting & fixing 10ltrs capacity PVC LL flushing cistern with a pair of CI/MS brackets complete with fittings such as syphonic arrangement,15mm nominal size brass/ PVC ball valve with polythene float,CP/brass handle,unions and couplings for connection with inlet, outlet,over flow pipes,32mm dia PVC flushbend,15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C.(a)10lit PVC L/L Cistern(Parry ware)

Factory made FRP(alternately called GRP)doorframe of size 75mmx100mm fabricated using E-glass chopped strand mat(CSM)U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin.The thickness of the GRP skins shall not be lessthan 2.00mm.The doorframe consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould.The segments are plugged in and are joined together by means of screw.The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement,Six numbers of 260mmx25mmx5mm size 'S' shaped MS flat hold fast shall be provided with the frame.The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications.The finish of door frame will be plain colour white/Ivory/Beige/ Light grey/Golden brown/Mahogany/Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C.

Factory made single leaf rigid FRP(alternately called GRP)sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass chopped strand mat(CSM)impregnated with orthopthalic palyester resin.The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone(EPS)structural foam panel of 29mm thickn ess and a density of 20kg/cu.mtr shall be used as core material. wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary salwood reinforcements for fitting the metal fittings such as tower bolts,aldrops, handles etc shall be provided.A structural adhesive compatible with(EPS)foam shall be used for bending the core material,the salwood reiforcements and the skins.the material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998.The finish of door shutter will be plain colour white/Ivory/Beige/ Light grey/Mahogany/Teak wood or any other colour using high quality pigments.Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.

Supplying all materials,labour,T&P and fixing ceramic tiles/marble tiles/ chequered tile in floors,treads and landing on 25mm thick bed of cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per the specification and direction of E.I.C. .

Supplying all materials,labour,T&P and fixing porcelain glazed tiles/marble tiles/kotatiles/kodappa tiles on 12mm thick CP(1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per the direction of E.I.C.

Earthwork in all kinds of soil in foundation trenches within 50m initial lead and 1.50m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C.(a)1st depth-

(b)2nd depth-

Supplying all materials,labour,T&P and filling in F&P with river sand well watered & rammed including conveyance of all materials to worksite, payment of royalty,taxes etc.all complete as per direction of E.I.C.

Supplying all materials,labour,T&P and providing cc(1:3:6) with 40mm HG metal including watering,curing and conveyance of all materials to site payment of royalty,taxes etc all complete as per direction of the E.I.C.

Supplying all materials,labour,T&P and providing cc(1:1.5:3)with 12mm size HBG chips including watering,curing and conveyance of all materials to site payment of royalty,taxes etc all complete as per direction of the E.I.C.

Supplying all materials,labour,T&P and providing brickwork with KB brick having crushing strength not less than 75kg/cm2 with dimensional tolerence of +/-8% In foundation & plinth with cm(1:4) including watering,curring, conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per P.H specification and direction of E.I.C.

Supplying all materials,labour,T&P and providing rigid & smooth centering and shuttering for RCC work including false work and dismantling then after casting including conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials,labour,T&P and providing MS reinforcements for RCC work including cutting, bending,binding,straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per P.H specification & direction of the E.I.C.

Supplying all materials,labour,T&P and providing RCC(1:1.5:3)with 12mm size HG chips for RCC works including hoisting,laying,watering,curing and conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials,labour,T&P and providing 12mm thick CP in cm(1:3) with punning on brickwork for skirting including watering,curing,conveyance of all materials to work site payment of royalty,taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials,labour,T&P and providing cement flush pointing(1:3) to brick masonry including watering,curing,conveyance of all materials to worksite payment of royalty taxes etc all complete as per specification and direction of E.I.C.

Supplying all labour T&P and making m.s step iron in 20mm dia m.s steel bar and fixing into walls of MH/Septic tank dullyembedded as per direction of E.I.C.

Supplying all labour,T&Pand providing 50mm thick precast RCC baffle wall in cc(1:1.5:3)with 12mm size bhg chips fitted&fixed in position and finished smooth etc all complete as per direction of E.I.C.

Supplying all materials,labour,T&P and providing 550x550x100mm thick RCC precast MH cover in cc(1: 1.5:3)using 12mm size hbg chips,placing the cover on the MH/ST & finishing smooth etc all complete including watering,curing,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per the specification & direction of E.I.C.

Supplying all materials,labour,T&P and providing,fitting and fixing of 160mm dia PVC Tee in wall of S.T including filling the recess with cc(1:1.5:3)with 12mm size BHG chip including watering,curing,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per the direction of E.I.C.

Filling in F&P with excavated materials,including watering&ramming as per the direction of the E.I.C.

Supplying all materials,labour,T&P and constructing Gully Trap chamber of the following inside size with 8cm thick precast cover slab in cc(1:2:4)mix using 12mm size HG chips,foundation concrete(1:4:8)using 40mm size HG metal on bed and aound trap,1st class KB Brick work in cm(1:6)in F&P and inside 12mm thick CP(1:3)finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing,specification and direction of E.I.C.(a)Inside size 250mm x 250mm

Supplying all materials,labour,T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size HG metal on bed,1st class KB brickwork in cm(1:6),moulding&shapping the channel inside & benching with cc(1:1.5:3)using 12mm size HG chips,12mm thick CP(1:3)with punning to inside, cement flush pointing(1:3)to outside,RCC coverslab in cc(1:1.5:3)using 12mm size HG chips with RCC MH cover in excavation in all kinds of soil & refilling the cavity around the chamber including watering,curing,conveyance of all materials to worksite,payment of royalty, taxes etc all complete as per approved specification & direction of the E.I.C.(a)Inside size 760mmx760mm x460mm.

Supplying all materials,labour,T&P and laying of 160mm dia. PVC pipes, in trenches (to level or slope)and jointing with supply of approved rubber lubricant by non heat application method using 40mm bhg metals on bed of the trench & hunching or allround concrete encasing with cc(1:4:8)using 40mm size h.g metal including curing,conveyance of all materials to worksite,payment of royalty,taxes etc. and testing all complete as per approved drawing,design, specification and direction of E.I.C.(a)160mm dia PVC pipe with allround encasing

Supplying all material,labour,T&P and constructing soakway pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brickwork in cm(1:6)for the remaining height at top,12mm thick CP(1:4) inside and outside over masonary brickwork gravel packing in the rear of well steining, RCC coverslab in cc(1:1.5:3)using 12mm size h.g chips fitted with iron lifting handles including earthwork in openwell excavation in all kinds of soil&refilling the cavity around the pit&painting the iron work,watering,curing, conveyance of all materials to worksite,payment of royalty,taxes etc. all complete as per approved drawing,specification and direction of E.I.C.(a)1.20m dia x 2.00m deep

Supplying all materials,labour,T&P and construction of masonry staging with providing 1st class KB brickwork in cm(1:6)of 0.46mtr height in staging, 12mm CP in cm(1:6),RCC Beam of 0.25mx0.30mx2.60m in cc(1:1.5:3) using 12mm size HG chips including centering,shuttering,bending and binding of rod etc watering,curring, conveyance of all materials to work site, payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all material,labour,T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tankconforming to IS:15701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts,including hoisting upto a height of 5mtr above G.L & placing the tank in required position including conveyance of all materials to worksite,payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials,labour,T&P and providing&fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80)and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C.(a)20mm dia C-PVC Pipe(Internal)

(b)25mm dia U-PVC Pipe(External)

Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.

Supplying all materials,labour,T&P and cutting holes in RCC,floors,roof,etc. upto 19cm thick for passing GI/PVC pipes and fitting etc. and repairing the holes after insertion of pipes etc. with cc(1:2:4)including finishing complete so as to make it leak proof as per direction of E.I.C.

Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.

Supplying all materials,labour,T&P and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of E.I.C.(Jaquar Make)(a)15mm dia CP Bib cock

(b)15mm dia CP(LB) Bib cock(Jaquar Make)

(c)15mm dia CP Two way Bib cock (Jaquar Make)

(d)15mm dia CP wall mixture[2-in-1](Jaquar Make)

(e)15mm dia CP Pillar cock long neck(Jaquar Make)

(f)15mm dia CP Angle stop cock(Jaquar Make)

(g)15mm dia CP Concealed stop cock(Jaquar Make)

(h)15mm dia CP Revolving Shower with shower Arm(Jaquar Make)

(i)15mm dia Health Faucet & 1.0m long Flexible pipe(Jaquar Make)

(j)25mm dia F.W.V.

(k)15mm dia CP Flange

(j)15mm dia CP Extension Piece

Labour for drilling of perfactly vertical bore holes as specified dia. For a specified depth below GL through consolidated and uncosolidated rock with down the hole hammer drilling rigs or combination drilling rigs(600cfm/ 200psi)as required to suit the site conditions as per the direction of E.I.C. including use of own rigs with its accessories,tools&plants and consumable etc. for lowering 200mm dia PVC/GI pipes for house fitted with socket and with or without well screen as per the necessity for the soft,medium,hard & boulder formation(PCV/GI)casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and with drawing after complete of tube well.(Tube well-1No) (a)Drilling of 200mm. dia. Bore-

(b)Drilling 150mm dia. Bore-

Lowering the following GI/PVC pipe with or without soltted pipes as per necessity from GL upto 30.00m depth and fitted and fixed in perfecty vertical position including cutting and threading pipes and soltted pipes and supplying and fixing of all jointing materials,T&P etc the top of the casing pipe threaded including piping tube well to prevent entry of foreign materials from above(PVC/G.I)supplied by the contractor (including cost of pipe) (a)Lowring of 200mm dia pipes-

(b)Cost of 200mm dia PVC casing pipes-

.Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of E.I.C

Supplying all materials,labour,T&P and fitting and fixing of ISI mark1.0HP single phase vertical water cool submersible pump set with discharge 1800/2200Lit./Hour & a head-55/70mtr.of reputed make (CRI/KSB/Texmoor Equivelent)Including cost conveyance and taxes etc. all completes as per P.H. Specification and direction of E.I.C.

Supplying all labour,T&P and fitting and fixing of 1.00HP single phase vetrical submersible pump set with commissioning and testing etc.all complete as per direction of E.I.C.

Supplying fitting & fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 0.50HP single phase submersible pump including all cost, conveyance of all taxes etc all complete as per direction of the E.I.C.

Supplying fitting fixing of three core flat cable(1.5mm2)of ISI make of reputed company like BCH/Finolex or Equivalent and connecting the pump & starter including all cost,conveyance and taxes etc all complete as per direction of the E.I.C.

Supplying fitting and fixing of plastic rope MS Well cover,MS Clamp, stainless steel short piece,bend & socket including all cost,taxes etc all complete as per direction of the E.I.C.

Supplying fitting and fixing of HDPE Pipes & pipe fittings with making connection to pump set including all cost conveyance and taxes etc all complete as per direction of the E.I.C.

Supply of all materials,labour,T&P and fitting & fixing of 5KW automatic voltage stabilizer having range from 50Volt to 220Volt suitable to run 1.00HP Submersible pump set including electrical connection from the existing mains & with the control panels of the pump set etc.all complete as per specification and direction of E.I.C.

Supplying all materials,labour,T&P and providing & fixing ISI marked Deep Well Hand Pump Standard HDWP conforming to IS-15500/04 Part-II complete with accessories alongwith 8nos connecting Rod made with bright bar electro galvanized of 12mm dia of 3mt. long with coupler and fitted with stand assembly including fitting & fixing and lowering of Hand Pump set at the Tube well with 32mm Nominal bore of 3mtr. Long Hot Pit Galvanised Screwed and Socketed fitted wih 32mm dia PVC screwed & socket fitted with socket made of seamless or machined from solid bar socket fitted at one end and threaded protection at other end conforming IS specification inclunding carriage and conveyance of all material and T&P etc. all completas per the direction of E.I.C.

Supplying all materials,labour,T&P and matreials for construction of Tubewell platform as per UNICEF platform as per UNICEF drawing and design etc all complete as per direction E.I.C.

Supplying all materials,labour,T&P and matreials for construction of drain as per UNICEF design etc all complete as per direction E.I.C.

Please Enable Macros to View BoQ information