47/2022-23/EDCR Increasing load capacity of overloaded Transformer, replacement of VCB, Jarjar wire and construction of line under Scheme Nagar Nikay, EDD-Milak, Rampur(Semi Trunkey Basis).

Amount

Carriage of the following material from Store Centre, Rampur to work site including loading & unloading.

11 KV VCB O/G Feeder CTR 200/100/5A

LT PVC Cable 3.5*70 SQ MM

AB Cable(3*120+1*95+1*16) MM SQ

ACSR Weasal Conductor

ACSR Rabbit ConductorConductor

Old Scrap VCB(From Site to Store)

Old Scrap wire (From Site to Store)

Cartage of Healty Transformer from store to site, dismantling of HT & LT connection & replace of follwoing capacity T/F from substation double poles (including connection) and loading and unloading with associated work at both ends within 70 kms.

Increasing load capacity of overloaded TF by Separate 63 KVA trasnformer

a) Single support Excavation of foundation Pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole), providing and laying of stone pad (300x300x75 mm) in the Bottom of the pit. Erection of support(pole) complete with fixing of 11 KV V-type cross-Arms and other accessories by providing clamps made of MS flat of size 65x65xc6 mm with Nuts & Bolts, as per RESPO Norms.

11 Mtr Long ST Pole.

8.5 Mtr PCC Pole Long

Grouting of support in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc. a) Single support

11 Mtr Long ST Pole.

8.5 Mtr PCC Pole Long

Grouting of Stay Rods(20x1800)mm including all work of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:8(cement, sand, 40mm brick ballast) including back filling of soil and proper ramming etc.

Fixing, tightening and nozelling of stay wire with stay rod with the pole of required tension by providing stay clamps.

Earthing of support with MS Earth Rod of (20x2500)mm long including excavation of pit and driving MS Rod 3.0 M apart from support and 0.5 M below the ground level and connecting below the earth electrodes with the help of GI wire No. 8SWG and earthing lugs

Providing & fixing of 11 KV Pin Insulator with Pin

Providing & fixing of 11 KV Disc Insulator

Laying ,stringing and binding of AB Cable(3*120+1*95+1*16) MM SQ as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of LT PVC Cable 3.5*70 SQ MM as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of ACSR Weasal Conductor as per RESPO Norms and as per direction of Supervising Engineer.

Dismentaling old line and Laying ,stringing and binding of ACSR Rabbit Conductor as per RESPO Norms and as per direction of Supervising Engineer.

Dismentaling of old VCB and Installing new 11 KV VCB O/G Feeder CTR 200/100/5A with fitting by providing of bolt and nuts as per RESPO Norms and as per direction of Supervising Engineer.

Installing Distribution Box three phase with fitting by providing of bolt and nuts as per RESPO Norms and as per direction of Supervising Engineer.

Gaurding of 11 KV HT Line as per RESPO Norms and as per direction of Supervising Engineer.

Providing and fixing Danger Board with Clamps

Providing and fixing J Hook

Providing and fixing Piareing Clamp

Providing and fixing Suspention Clamp

Providing and fixing Dead end clamp

Providing and fixing Stone Pad

Providing and fixing barbed wire

Providing and fixing F Bracket with nut bolt

Providing PCC Pole 8.5 Mtr. Long.

Providing ST Pole 11 Mtr. Long.

Providing X-Arms.

Providing Distribution Box

Providing Droper Channel 100x50

Providing Top Channel 125x65

Providing MS Angle 75x75

Providing Guarding Angle

Providing GI Wire

Providing Stay Complete

Providing Earthing Complete

Providing and fixing Clamp with Nuts & bolts for Holding X-Arm

Providing and fixing Nut Bolt with clamp

S A TRADERS