Replacement of old damaged Sub main wirings, Main switches, Distribution Boards and MCBs of C type Double storey building - 07 Blocks (28 Units), C type Triple storey building - 01 Blocks (06 Units) B type Double storey building - 02 Blocks (16

Amount

Wiring for circuit/sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Wiring for circuit/sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required. 4 X 10 sq. mm + 2 X 6 sq. mm earth wire. (Main switch to DB Box)

Supplying and fixing of following ways surface/recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 +24) Double door.

Supplying and fixing 5 A to 32 A rating, 240/415V, 10 kA,"C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double Pole

Supplying, installation, testing and commissioning of following capacity TPN tap off box made of 1.6 mm thick sheet steel enclosure duly painted with power coating on existing rising mains complete with TPN disconnector FUS and HRC fuses, connections, earthing etc as required. 63 amp TPN

Wiring for light/fan point/exhaust fan point/call bell point with 1.5 sq mm. FRLS PVC insulated copper conductor single core single core cable in surface/ recessed medium class PVC conduit, with piano type switch , phenolic laminated sheet, suitable size M.S. box & earthing the point with 1.5 Sq. mm. FRLS PVC insulated copper conductor single core cable etc, as required. Group B

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. up to 35 sq. mm (clamped with 1mm thick saddle).

Laying of one number PVC insulated and PVC insulated and PVC Sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc as required. up to 35 sq.mm.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 KV grade as required. 4 X 35 sq. mm (32 mm)

Earthing with G.I. earth Plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry with cover plate heaving locking arrangement and watering pipe of 2.7 metre long etc . with charcoal/coke and salt as required .

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Providing of PVC/XLPE insulated PVC sheathed aluminum armoured conductor cable 1100V, 25 sq.mm, 3.5 Core.

Total impact of GST for the purpose of CTC

M/S SHREE BALAJEE ENG.CO.

Rajneesh Electricals

M/S B.N. PANDEY