e tender for the office modernization work and furniture supply at Thrissur

Amount

TABLE FOR PRINCIPAL (For detailed specification refer tender documents)

Back Unit -BACKUNIT-Made of 18mm prelam board, PVC edge banded, sliding/ hinge doors, kwock down fitting, horizontal pannels at a distance of 45cms, vertical support to be provided at an intervel of 80/90cms. Hardware like handle , lock and key, minifix, powder coated chip board screws, PVC right angle block, ss sheves support, level adjusters etc. Size:-210 (L)x 45 (W) x 195 (H) cms

CHAIR FOR PRINCIPAL-H.Back Chair- Art leather Upholstered seat & Back, PU Arms, Tilt , Gas Lift , Metal Base, Nylon base

VISITORS CHAIR FOR PRINCIPAL-Visistors Chair - Mesh Back, Cushioned Seat, Fixed Frame

TABLE FOR DINING WITH 4'HT PARTITION -Table made of 25 mm prelaminated particle board , Knock down fitting, level adjustor, Visible edges are lipped with 2 mm PVC edge band and other edge with .5 mm edge band. (W/o Drawer unit.) 30cm ht modular partition above the table top

SOFA -Supplying and placing in position Sofa with fully upholstered arm panels, seat and back, sofa finished with leatherette material. 2 Seater+Corner table+Single seater

5 FT HT PARTITION - In fornt of Bathroom 60 - 75 mm thick, 80 microns powder coated CRCA partitions with pre punched cut outs to run electric & networking cables. Duel raceways with punch - out to fix electrical and data modules for power & data skirting level & just below table top. Partition are covered with 6 mm tiles (Prelaminated particle Board/MDF/Fabric Cladded Board) as required by using sliding panel method, Level adjusters and all the visible edges of partitions are covered with curved Aluminium trims.

BLIND-Hand oprated drive system, chain and spring, double shade blind. Size: 150x150cm each

OFFICE -Modular Table for J S (For Detailed specification refer tender documents)

f)Back Unit - Made of 18mm prelam board, PVC edge banded, sliding/hinge doors,knock down fitting, horozontal pannels at a distance of 45 cms,vertical support to be provided at an intervalof 80/90 cms. Hardware like handle,lock and key, minifix,powder coated chip board screws,PVC right angle block, ss levels support,level adjusters etc 180 (L)x 45 (W) x 75 (H) cms

Chair for JS&GI-(For Detailed specification refer tender documents)

Visitors chair for JS&GI -For Detailed specification refer tender documents)

Chair for staff room -Visitors Chair - Mesh back, coushioned seat, fixed frame

Modular Cubicle for Clerk(For Detailed specification refer tender documents)

Chair for Clerk -L Back Chair - Mesh back, cushioned seat, PP arms, gas lift, tilt, nylon base

Modular Cubicle for Typist (For Detailed specification refer tender documents)

Chair For Typist -L Back Chair - Mesh back, cushioned seat, PP arms, gas lift, tilt, nylon base.

Cupboard/Back Unit for Clerk/Typist Size:-150 (L)x 45 (W) x 75 (H) cms

Cupboard/Back Unit for Clerk/Typist Made of 18mm prelam board, PVC edge banded, sliding/hinge doors,knock down fitting, horozontal pannels at a distance of 45 cms,vertical support to be provided at an intervalof 80/90 cms. Hardware like handle,lock and key, minifix,powder coated chip board screws,PVC right angle block, ss levels support,level adjusters etc Size:-120 (L)x 45 (W) x 75 (H) cms

Stand for Photocopier/Printer -Fully made of prelam board, knock down fitting, PVC edge banded, hinge door, handle etcSize:-75 (L)x 45 (W) x 75 (H) cms

Twin Table for OA Frame/understructure made of 50x50 SQ tube & connections are made of 50x25 rectungular tube, 25mm thick prelam board table top with 2mm PVC edge band, modestry panel, 15cm Ht partition above table top, level adjuster etc.

Chair for OA -Mesh back, coushioned seat, fixed frame.

BLIND-Hand oprated drive system, chain and spring, double shade blind. Size: 150x150cm each

Electrical & Networking for Workstation, tables -Providing electrical and net working connection to the workstations and tables from the existing points in the room.

Providing and fixing 4'Ht modular partition for covering UPS @ office area. 300(L)x120(L)cms

Providing and fixing 4'Ht modular partition for covering UPS @ Computer lab 290(L)x120(L)cms

Provide a shelf with lock & key @ electrician workshop Size:120(W)x50(D)x200(H)cms (For detailed specifiction refer tender documents)

ARTIM TECHNOLOGIES