Building repairing work and chair repairing work in pandit dindayal auditorium building in Bodakdev Ward and other wards in North West Zone.

Name of Work: Building repairing work and chair repairing work in pandit dindayal auditorium building in

Bodakdev Ward and other wards in North West Zone.

Sr. No Qty Items Per Amount Rs.

Excavation for foundation up to1.5 m depth including sorting out and

stacking of useful materials and disposing of theexcavated stuff

upto 50 Meter lead.(A) Loose or soft soil (R & B S.O.R 2023-24 I.no.

2 Upto 1.5 mt Depth 115.92 Cmt

2 1.5 to 3.0 mt.depth 128.52 Cmt

Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidation each deposited layer by ramming and watering.

Providing and laying cement concrete1:5:10 (1-Cement: 5-

coarses sand and:10-hand broken stone aggregates 40mm nominal

size) and curing complete excluding cost of formworkin (A)

3 2 Foundation and Plinth. 2492.51 Cmt

Providing and laying cement concrete1:4:8 (1-Cement: 4-

coarses and:8-hand broken stone aggregates 40mm nominal size)

and curing complete excluding cost of formworkin (A) Foundation

4 2 and Plinth 2653.67 Cmt

Providing and laying cement concrete1:3:6 (1-Cement: 3-

coarses sand and:6-hand broken stone aggregates 40mm nominal

size) and curing complete excluding cost of formworkin (A)

5 2 Foundation and Plinth. 2976 Cmt

Providing and laying cement concrete 1:3:6 (1-Cement:3-coarse

sand:6-crushed stone aggregates 20mm nominal size) and curing

complete including cost of formwork in (A) wall caps/coping

Providing and laying cement concrete work 1:2:4 ((1-Cement:2-

coarse sand:4-graded aggregates 20mm nominal size) curing

complete excluding cost of formwork and reinforcement.

a 2 Foundations, footings, base or columns and mass concrete 3923.53 Cmt

Slabs, landing, shelves, balconies, lintels, beams, girders and

b 2 cantilivers upto floor two level 4012.47 Cmt

c 2 Independent piers, columns, and pillars, upto floor two level 3661.3 Cmt

Provdg. & laying cement concrete 1:2:4 (1 cement : 2 coarse sand :

graded stone aggregates 20 mm nominal size) for reinforced

concrete chhajjas not exceeding 10 cm. thickness upto floors two

level including finishing the exposed surfaces with cement

mortar 1:3 (1 cement : 3 find sand) to give a smooth and even surface

centering and form work and curing complete excluding cost of

8 2 reinforcement. 6487.07 Cu.M.

Providing and laying controlled cement concrete / Ready Mix

Concrete of M-200 and curing complete, excluding the cost of

9 2 form work and reinforcement for reinforced concrete work in:

(A) 2 Foundations, footings, base of columns, and mass concrete. 3977.88 Cu.M.

(B) 2 Walls from top of foundations /level up to floor Two level. 4484.17 Cu.M.

Slabs,landing,shelves,Balconies Lintels, Beams, Girders and Cantilever

(C) 2 upto floor 4460.36 Cu.M.

(D) 2 Columns, pillars, posts, and struts, up to floor two level. 4558.2 Cu.M.

(E) 2 Staircase up to floor two level. (excluding landing) 5418.91 Cu.M.

(K) 2 Vertical and horizontal fins up to floor two level. 4701.97 Cu.M.

Providing and Laying ordinary cement concrete 1:2:4 (1-Cement 2-

coarsesand: 4-graded stone aggregates 20 mm nominal size) and

finishing smooth with curing etc. complete including the cost of form

work but excluding the cost of reinforsement for R.C.C work in (iv)

Slabs having more than 13 cm and upto 15 cm.thickness

Providing and Laying ordinary cement concrete 1:2:4 (1-Cement 2-

coarsesand: 4-graded stone aggregates 20 mm nominal size) and

finishing smooth with curing etc. complete including the cost of form

work but excluding the cost of reinforsement for R.C.C work in (iv)

Slabs having more than 8 cm and upto 10 cm.thickness

Brick work using common burnt clay building bricks having

crushing strength not less than 35kg./Sq.Cm.in foundation and

plinth in Cement Mortar1:6 (1-Cement :6 - fine sand)

2 (A) Conventional (upto 10 ton) 3981.21 Cmt

2 B) Modular 4241.7 Cmt

Extra Rate for brickwork in Above Item for super structure above

13 2 plinth level upto floor two level (B) Conventional

a 2 (A) Conventional 272.25 Cmt

b 2 B) Modular 262.35 Cmt

C) above floor two level Item No. 2(6.13) (A) Modular Per

D) above floor two level Item No. 2(6.13) (B) Conventional Per

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:5 ( 1-

Cement : 5 coarse sand ) in foundation and Plinth

14 2 conventional brickwork 583.49 Smt

Extra for half brick masonry in super structure above plinth level

15 2 upto floor two level (B) conventional 52.8 Smt

Providing form work in ordinary timber planking so as to give a

rough finish including centering, shuttering, strutting and propping

etc. height of propping and centering below supporting floor to

celling not exceeding 4 M & removal of the same for in situ

reinforced or plain concrete work upto floor four level

a 2 Foundation, footings, bases of columns etc. and mass concrete. 171.68 Smt

(B) Flat surfaces such as soffits of supspened floors slabs Landings and

b 2 the like. (1) Floors etc. upto 200 mm in thickness. 252 Smt

(B) Flat surfaces such as soffits of suspended floor roof slabs Landings

c 2 and the like. (2) Floors etc. above 200mm in thickness. 270.9 Smt

Vertical surface such as walls (any thickness) partitions and the like

d 2 including attached buttresses & string course & the like. 229.95 Smt

(ii) Sides And Soffits Of Beam, Haunchings Cantilevers, Girders,

e 2 Bressumers And Lintels Not Exceeding 1 M In Depth. 192.15 Smt

(G) Columns PillarsPosts and struts. (1) Square Rectangular Polygonal in

f 2 plan. 297.68 Smt

g 2 (2) Circular or curved in plan. 422.1 Smt

(H) (2) Sides and soffits of Beams Beam Haunchings canti-levers Girders

h 2 Bressumers and Lintels exceeding 1M.in Depth. 259.88 Smt

Providing and fixing 35 mm thick panelled, glazed or panelled and

glazed shutters for Doors windows and clear story windows including

anodised alluminium But hinges with necessary screws and indian

17 2 teak wood shutters with.

a 2 (A) Plywood sheet panels. 3459.09 Smt

b 2 (B) Particle board panels 3464.51 Smt

c 2 (C)Hard board panels. 3433.65 Smt

d 2 (D) Asbestos sheet panels. 3406.53 Smt

Providing and fixing 25 mm thick shutters for cup boards etc.

including black enamelled M.S. butt hinges with necessary screws.(A)

18 2 Indian teak wood. (i) Fully Panelled. 3006.75 Smt

Providing and fixing 25 mm thick shutters for cupboards etc. including

anodised alluminiu butt hinges with necessary screws. (A) Indian teak

a 2 wood. (ii) Fully Glazed. 3006.75 Smt

Providing and fixing 25 mm thick shutters for cupboards etc. including

anodised alluminiu butt hinges with necessary screws. (A) Indian teak

b 2 wood. (ii) Partly panelled and partl glazed. 2814.42 Smt

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacings and frame

alround, square or round bars with round headed bolts and nuts or by

19 2 screws (A) Plain Grill. 100.17 kg

Providing and fixing glazed louvered glass windows and

ventilators with teak wood frame 10 cm. x 7 cm. size including

20 2 coats of oil painting to wood work etc.complete. 4102.54 Smt

Providing and fixing glazed louvered glass windows and

ventilators with teak wood frame 10 cm.x7 cm. size including

coats of oil painting to wood work etc.complete.with wooden louvers

21 2 plank 12mm thick 4332.47 Smt

Providing and fixing 35 mm thick shutters for Doors, windows and

clere story windows including Indian teak wood frames 10 cm x

cm. size including anodized alluminium fixtures and fastenings

including primer coat of approved quality and two coats of oil painting

22 2 etc, complete.(ii) Fully Glazed. 4595.06 Smt

Providing and fixing 35 mm thick shutters for Doors, windows and

clere story windows including Indian teak wood frames 10 cm x

cm. size including black enamelled iron oxidixed fixtures and

fastenings including primer coat of approved quality and two coats of oil

23 2 painting etc, complete.(ii) Fully Panelled. 5285.45 Smt

Providing and fixing 35 mm thick shutters for Doors, windows and

clerestory windows including Indian teak wood frames 10 cm x 7 cm. size

including anodized alluminium fixtures and fastenings including primer

a 2 coat of approved quality and two coats of oil painting etc, complete. (iii) 4940.25 Smt

Providing and fixing 30 mm thick FACTORY MADE SOLID PANEL

PVC DOOR SHUTTER consisting of frame made out of M.S.tubes of

gauge thickness and size of 19 mm x 19 mm for stiles and 15 mm x

mm for top and bottom rails.M.S. frames hall have a coat of steel

primers of approved make and manufacture, M.S. frames hall be

covered with 5 mm thick heat moulded PVC ‘C’ channel of size

x 50 mm formings tiles, and 5 mm thick 75 mm wide PVC sheets for to

prail, lock rail and bottom rail on either side, and 10 mm (5 mm x 2) thick,

20 mm wide cross PVC sheet as gap insert for top rail and bottom rail,

Panelling of 5 stiles and rails with 30 mm wide x 5 mm thick PVC

sheet beading on eighter side, and joined together with

solventcement adhesive,. An additional 5 mm thick PVC strip of 20 mm

width is to be stculkon the interiors side of the ‘c’ channel using

PVC solvent cement adhesive etc. complete as per direction of

Engineer incharge, manufacture’s specification and drawing.

Providing and fixing in position collapsible steel shutters with

vertical channels 20 x 10 x 2 mm braced with flat iron diagonal 20 x

mm size with top and bottom rails T iron 40 x 40 x 6 mm with 38 mm

dia steel pulleys complete with bolts, nuts, locking arrangements,

stoppers, handles, including a priming coat of red lead paint &

25 2 approved make. 5391.23 Sq.M.

Providing and fixing 1 mm thick M.S. sheet sliding shutters with

frame and diagonal braces of 40x40x6 mm angle iron, 3.15 mm

M.S.gusset plates at Junctions and corners 25 mm dia. pulley,

40x40x6 mm angle and T-iron guide rail at top and bottom

respactively with handles, stoppers and locking agangement etc,

including applying a priming coat of red lead paint.

Providing & Fixing in position Alluminium doors with frame using

approved quality anodised extruded alluminium section as

approved by Engg.in charge(Jindal alluminium) (a) Frame

sections 101.6x44.45 mm (b) Shutter bottom vertical & top section

83.5x44.45 (wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter bottom

section at 114.3x44.45 mm at (1.37kg/mt) Shutter middle section at

100x44.3 wt.(1.37 kg/mt) incl.providing & installing 5 mm thick

approved color Acrylic sheet of standard quality fixed with glazing

chips on upper pannel & Laminated sheet on lower pannel

(wtt.0.13 kg/Rmt) etc.comp.as direction of engg.in charge.(N.S.)

Providing and fixing extruded aluminum window having extruded

aluminum Colour r Powder Coated section frame main outer size 127mm

x 38.10mm x 1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four track member

size 122.20mm x 31.75mm x 1.10mm @ Wt. 1.205 Kg/mt,vertical member

of size 122.20mm x 31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt,vertical member of size 40mm x 18mm x 1.29mm @ wt.of

28 2 0.456Kg/mt,@ with 5 mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and transparent silicon

Providing & Fixing in position Alluminium vents with frame using

approved anodised extruded alluminium section as approved by

Engg. In charge.(Jindal alluminium) units equivalent

Approved Rate)Frame section of 63.50 x 38.50 mm. (wt.

0.68Kg/Rmt) incl. Providing & Installing 5 mmthick approved color

29 2 Acrylic sheet of standard quality etc. comp. 1,950.00 Sq. M.

Providing and fixing standared extruded of alluminium section of

size 63 mmx38.10 mmx1.2 mm (Jindal Section:2434, or equivalent

@ Wt.0.643 Kg/mt) with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as details etc complete for

30 2 Ventilation 1163.92 Sq. M.

Providing and fixing standared extruded of alluminium section of size

31 2 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with colour Powder Coated 2,141.88 Sq.M.

Providing and laying 40 mm thick marble chips flooring rubbed and

polished (I.E.terrazo) to granolithic finish with under layer 30 mm thick

cement concrete1:2:4 (1-Cement: 2-coarse sand: 4-graded stone

aggregate 10 mm and down gauge) and to player 10 mm thick with

white, black or white and blak marble cihps of required sizes from 1 mm to

4 mm nominal size laid in cement marble powder mix 3:1 (3- Cement:1-

Marble powder by weight) in proportion of 4:7 (4- Cement:

7-marble chips by volume) (C) Medium Shade pigment with

approx 50% white cement and 50% ordinary cement (In top layer only)

32 2 (upto 10 ton) 811.13 Sqm

Providing and laying marble chips skirting (Terrazo) or dedo rubbed,

and polished to Granolithic finish to player 6 mm white, black or white

and black marble chips of size from smallest to 4 mm nominal

size laid in cement marble powder mix 3:1 (3-Cement: 1 marble

powder by weight) in proportion of 4:7 (4-cement marble powder mix: 7-

marble chips by volume) (B) Light shade pigment with white cement (In

33 2 top layer only) 869.4 Sqm

Providing and laying white glazed tiles 6mm thick in flooring treads of

34 2 steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1- 908.17 Sq.M.

Providing and laying Ceramic tiles 6 mm thick in flooring treads of

steps and landing laid on a bed of 12 mm thick cement mortar 1:3 (1-

35 2 cement :3-coarses and) finishing with flush pointing in white cement. 960.47 Sq.M.

Providing & Fixing 20 mm thick Mirror Polished Decorative Granite

Board with Computerised Golden Letters Discription as per

instructions of engg. in charge to M.S. frame structure for

36 2 Inaugaration & Public Handover Function (N.S.) 4,304.00 No.

Providing and laying Vitrified tiles 8 to 10 mm thick, 36''x36'' in flooring

treads of steps and landing laid on a bed of 12 mm thick cement

mortar 1:3 (1-cement:3-coarses and) finishing with flush pointing

37 2 inwhite cement. 1469.91 Sq.M.

Providing and laying Vitrified tiles 8 to 10 mm thick, 24''x24'' in skrting

risers of steps and dedo on 10 mm thick cement plaster 1:3 (1-

cement: 3-coarse sand) and jointed with white cement slurry

Providing and laying Vitrified tiles 8 to 10 mm thick, in skrting risers of

steps and dedo on 10 mm thick cement plaster 1:3 (1-cement:3-

39 2 coarse sand) and jointed with white cement slurry 1523.61 Sqm

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring

treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3

(1- cement : 3-coarse sand ) finishing with flush pointing in white cement.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

existing flooring by adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including finised with flush

41 2 pointing & cleaning the surface etc. complete for antiskit 1383.99 Sq. M.

Providing and laying polished Kota stone slab flooring over 20 mm

(Average) thick base of cement mortar 1:6 (1-cement:6-coarses

and) or L.M.1.1.5 (1-Lime putty:1.5-coarses and) laid over

and jointed with grey cement slurry mixed with pigment to match the

Providing and laying marble stone slab flooring over 20mm (average)base

of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime

putty : 1.5 - coarse sand) laid and jointed with gray cement slurry including

rubbing and polishing complete. (A) Marble slab 25mm thick

Providing and laying polished Kota stone slab flooring over 20 mm

(Average) thick base of cement mortar 1:6 (1-cement:6-coarses

and) or L.M.1.1.5 laid over and jointed with grey cement slurry

including rubbing and polishing etc.complete. (B) 30 mm thick

Providing and laying polished kota stone slab 25 mm thick in risers of

steps, skirting Dedo and pillars laid on 10 mm thick cement mortar 1:3 (1-

Cement :3 coarses and) and jointed with gray cement slury

mixed with pigment to match the shade of slab including rubbing

45 2 and polishing etc.complete. 1176.03 Sq.M.

Providing and laying cement concrete flooring 1:2:4 (1-cement: 2-

coarses and:4-graded stone aggregate 20mm nominal size) laid in

one layer and finished with a floating coat of neat cement. (A) 40mm

46 2 thick. 297.68 Sq.M.

Providing and laying cement concrete flooring 1:2:4 (1-cement: 2-

coarse sand:4-graded stone aggregate 20mm nominal size) laid in

one layer and finished with a floating coat of neat cement. (B) 50mm

47 2 thick. 348.08 Sq.M.

Providing and laying broken china mosaic flooring for terrace using

mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar

1:3 to plain or slope and to be tempered to bring mortar creme out upto

surface using white cement including rounding off junctions and

extending them up to15 cm along the wall, clearing with water

48 2 and oxalic acid etc.as directed. 739.89 Sqm

Providing and laying coloured glazed tiles of the size

mmx200 mmx8 mm/300 mmx450 mmx8 mm in skirting, risers of

steps and dedo on 10 mm. thick cement plaster 1:3 (1cement:

49 2 coarse sand) & jointed with white cement slurry. 1426.95 Sqm

Providing ridges or hips 600 mm overall in plain G.I. sheet class-3

fixed with G.I. J or L Hooks and nuts 8 mm dia G.I. Limpet and

50 2 bitumen washer complete. (1) 0.80 mm thick sheet. 635.58 Sqm

Providing and fixing 150 mm wide 450 mm over all semi circular plain

G.I.sheet class-3 gutter with Iron brackets 40 mmx3 mm size Bolts,

Nuts, washers etc. including making necessary connection with

51 2 rain water pipes. (i) 0.80 mm thick Sheet. 555.71 Sqm

Providing and fixing five courses water profing treatment with

bitumen felt consisting of second and fourth course of blown/

bitumen or/and residual bitumen applied hot at 1.2 kg.per Sq.M.of

area for each course and first course with fibre base bitunen

saturated under lay type land third course with fibre base self finished felt

type 2 grade 1 and fifth and final course of stone grit 6 mm and down

size or pea sizes gravel spread at

Cu.Metre/Sq.metre preparation of surface excluding grading complete.

Providing and fixing on wall face C.I. Rain water pipe including filling

the joints with spun yarn soaked in neat cement slurry and cement

53 2 mortar 1:2(1- Cement : 2-fine sand) (A) 75 mm dia. 283.62 Rmt

Providing 15 mm thick cement plaster in single coat on Rough

(Similar) side of single or half brick walls for interior plastering up to

floor two level and finished even and smooth in (i) Cement mortar

54 2 1:3 (1-cement :3-sand) 174.83 Sqm

Providing 20mm thick sand faced cement plaster on walls upto height

metres above ground level consisting of 12mm thick backing coat of C.M.

1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-

55 2 cement : 1-sand) etc. complete. 297.68 Sqm

Colour washing with lime on wall surface (two coats) over and

including a primary coat of white washing to give an even shade

after through brooming the surface to remove all dirt, dust, mortar

56 2 drops and other foreigh matter. 12.29 Sqm

Removing dry or oil bound distemper by a washing and

scraping and sand papering the wall surface smooth including

57 2 necessary repairs to scratches complete. 11.19 Sqm

Distempering with dry distemper of approved brand and manufacture

(two coats) and of required shade on wall surfaces of given an even

shade, over and including a priming coat of whiting after

thoroughly brooming the surface free from mortar dropping and

58 2 other foreign matter. 46.94 Sqm

Distempeing (Two coats) with oil bound distemper of approved

brand and manufacture and of required shade on wall surfaces to

give an even shade, over and including a priming coat with

distemper primer of approved brand and manufacture after

thoroughly brushing the surface free from mortar dropping and

other foreign matter and also including preparing the surface

59 2 even and sand papered smooth. 76.08 Sqm

Extra Coat for Above Item over above for every subsequent

60 2 coat of approved brand and manufacture. 30.09 Sqm

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give

an even shade including throughly brushing the surface free from

61 2 mortar droppings and other foreign matter and sand papered smooth. 78.44 Sqm

Extra over item for every sub sequent coat of wall painting with

62 2 plastic emulsion paint of approved brand 33.39 Sqm

Extra over item for painting with plastic emulsion paint of approved brand

62 a 2 on ceilings and sloping roofs. 5.36 smt

Applying priming coat over new steel and other metel surface after

and including preparing the surface by throughly cleaning, oil,

grease, dirt and other foreign matter and scoured with brushes

fine steel wood, scrapers and sand paper with ready mixed priming

63 2 paint brushing red lead. 34.34 Sqm

Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to give an

even shade including cleaning the surface an even shade including

64 2 cleaning the surface of all dirt, dust and other foreign matter. 86.94 Sqm

Painting one coats (excluding priming coat) on previously painted

steel and other metal surface with enamel paint, brushing to give an

even shade including cleaning the surface of all dirt, dust and other

65 2 foreign matter. 54.35 Sqm

66 2 Extra over item for every sub sequent coat of paint. 50.4 Sqm

Painting two coats (excluding priming coat) on new steel and

other metal surface with synthetic enamel paint, brushing to give an

even shade including cleaning the surfaceofalldirt,dust and other foreign

67 2 matter. 64.66 Sqm

Painting one coats (excluding priming coat) on previously printed

steel and other metal surface with synthetic enamel paint, brushing to give

an even shade including cleaning the surface of all dirt, dust and other

68 2 foreign matter. 43.79 Sqm

69 2 Extra over Above item for every sub sequent coat of paint. 43.47 Sqm

Painting two coats (excluding priming coat) on external surface of

new rain water, soil, waste and vent pipes and fittings with ready

mixed bituminous brushing, black, anti corrosive to give an even

shade including cleaning of all dirt, dustand other foreign matter.(75 mm

70 2 dia) 20.16 Sqm

Painting two coats (excluding priming coat) on external surface of

new rain water, soil, waste and vent pipes and fittings with ready

mixed bituminous brushing, black, anti corrosive to give an even

71 2 shade including cleaning of all dirt, dust and other foreign matter.(100 mm 25.05 Sqm

Painting two coats (excluding priming coat) on new wood and

wood based surface with enamel paint, interior to give an even

shade including cleaning the surface of all dirt, dust and other

foreign matter sand papering and stopping. (a) Ready mixed paint

72 2 brushing wood primier pink. 26.78 Sqm

Painting one coats (excluding priming coat) on previously painted

wood and wood based surface with enamel paint, to give an even

shade including cleaning the of all dirt, dust and other foreign matter.(b)

73 2 Ready mixed paintbrushing priming for enamel 26.78 Sqm

74 2 Extra over Above item for every sub sequent coat of paint. 24.26 Sqm

Painting two coats (excluding priming coat) on new wood and

wood based surface with ready mixed paint, brushing, oil, gloss,

semi gloss to give and even shade including cleaning of all dust, dirt

75 2 and other foreign matters and papering and stopping. 104.12 Sqm

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

76 2 loose powdered materials.etc complete 113.4 Sqm

Applying two coats of Birla (white cement based) or Asian

(acryliclapy-putty) or equivalent & two coats of primer of approved

brand and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar dropping

77 2 and other foreign matter and sand papered smooth. 40.19 Sqm

Painting one coats (excluding priming coat) on previously painted wood

and wood based surface with enamel paint, to give an even shade

78 2 cleaning the of all dirt, dust and other foreign matter. 55.13 Sq.M.

Writing letter or figures on any surface with black japan paint per

(stops, comas, hyphens and the like not to be measured and paid letter

for separately) (i) Block (Letters/Figures) (Per 10 Letter pet per

Demolition including stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including stacking of

serviceable materil as and disposalof unserviceable materials with all

81 2 lead and lift.(ii) In Cement Mortar. 544.95 Cu.M.

Dismentaling tiled of stone floors laid in mortar including stacking of

serviceable materil as and disposal of unserviceable materials with all

82 2 lead and lift. 47.25 Sqm

Dismentaling of sheet roofing including ridges, Hips, Valleys,

Gutters etc. stacking of serviceable materil as and disposal of

83 2 unserviceable materials with all lead and lift.(i) G.I.sheet roofing. 47.25 Sqm

Dismentling steel work including distempering and stacking the

84 2 materials with all lead and lift. 2.42 Kg.

Dismentling doors, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraves, hold fasts and other

attachment etc. complete and stacking the material within all lead

85 2 and lift.(i) Not exceeding 3 Sq.M. in area. 185.85 Each

Dismentling doors, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraves,hold fasts and other

attachment etc. complete and stacking the material with in all

86 2 lead and lift.(ii) Exceeding 3 Sq.M.in area. 248.85 Each

Dismentling barbed wire in fencing including making rolls and also

including dismentling fencing posts including all earth work concrete in

base and making good the disturbed ground stacking useful

materials as directed and disposing as directed and

disposing of the unserviceable materials with all lead and lift.

Dismentling C.I. pipes G.S.W. pipes abd A.C. rain water pipes

with fittings and clamps including stacking the materials with all lead

88 2 and lift (for any dia, of pipe) 74.03 Rmt

Dismantling santtary fittings like wash basin . W.C. pan Indian and

Europe an type, flushing tank etc. including stacking the materials

89 2 with all lead and lift 401.63 Each

Scraping oil paint from steel and other metal surface and making the

90 2 surface even (with Hand Scraping.) 48.83 Smt

Removing and scraping of old deteriorated plaster of any

thickness from wall / R.C.C member including stacking of

serviceable material and disposal of unserviceable from site of work

91 2 with all lead and lift 19.38 Smt

Providing and fixing M.S. fan clamps of shape and size as

specified in existing R.C.C. slab including cutting chase and making

92 2 good. 168.53 Each

Cutting out cracks of roof terrace to V-section, cleaning out, wetting,

grouting with cement and sand slurry 1:3 (1-cement 3-sand )

Cutting out cracks roof terrace to V-Section cleaning out and filling

solidly with a hot mixture of bitumen and clean dry sand (1:1

94 2 by weight) 75.29 Rmt

Providing & Fixing in position Alluminium doors with frame using

approved quality anodised extruded alluminium section as

approved by Engg.in charge(Jindal alluminium)(a) Frame sections

101.6x44.45 mm (b) Shutter bottom vertical & top section

83.5x44.45 (wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter bottom section at

114.3x44.45 mm at (1.37 kg/mt) Shutter middle section at 100x44.3

wt.(1.37 kg/mt) incl.providing & installing 5 mm thick approved

color Acrylic sheet of standard quality fixed with glazing chips on

upper pannel & Laminated sheet on lower pannel (wtt.0.13 kg/Rmt)

etc.comp.as direction of engg.in charge.(N.S.)

Providing & Fixing in position Fully Panelled / Partly Panelled Partly

Glazed / Fully Glazed Alluminium doors with frame using approved

quality anodised extruded alluminium section as approved by

Engg. In charge.(Jindal alluminium )(a) Frame sections 101.6x44.45 mm

b) Shutter vertical & top section 83.5x44.45 (wt. 1.31 kg/mt.)(

at 1.31 kg/mt) © Shutter bottom section at 114.3 x44.45mm at (

kg/mt ) Shutter middle section at 100x44.3 wt. (1.37 kg/mt ) incl.

providing & installing 5 mm thick Glass of standaed quality fixed /

12 mm thick Laminated sheet with glazing chips (wt. 0.13 kg/ Rmt)

in panels etc. comp. as per Detail Given & direction of engg.in

96 2 charge. 4,583.00 Sq.M.

Providing & Fixing in position Alluminium window 2/3/4 track

sliding / fix type with frame using approved anodised extruded

alluminium section as approved by Engg. In charge.(Jindal

alluminium) units equivalent. including P/F installing 5 mm thick

clear/tinted Glass of standard quality etc.comp.

Providing & Fixing in position Alluminium vents with frame using

approved anodised extruded alluminium section as approved by

Engg. In charge.(Jindal alluminium) units equivalent Frame

section of 63.50 x 38.50 mm. (wt.0.68 Kg/Rmt) incl. Providing &

98 2 Installing 5 mm thick Glass of standard quality etc. comp. 4,218.00 Sq. M.

Providing and fixing of Ridge flashing for roof panel shall be

made out of 0.5 mm thick pre coated GI sheet. The Pre

coatedsheet shall be of minimum 240 mpa steel grade confirming

to IS 14246:1995 and shall have zinc coating of minimum 120 gsm

as per IS:277:1992, 5-7 microns epoxy primer on both side of the

sheet and polyester top coat 15-18 micron. The PP GI Sheet shall

have plastic protective guard film of minimum 25 microns to avoid

scratches during transportation. The ridge shall be fixed to the steel

members by poprivetor self drilling/self stitching fastners @

maximum 450mm c/c along length of capping/flashing etc complete .

Supplying and fixing vinyl flooring over the surface having 1-2 mm

thickness as per directed by engineer incharge etc as

100 2 completed (N.S.) 963 Smt

Providing and laying 15mm bamboza wooden flooring as per

architect's drawing with all necessary details as directed by

the project consultants. Use underlay for better result as per

Detail specifications and directed by the project consultants. (N.S.)

101 2 Approved Rate ) 2,690.00 Smt

Providing and fixing 1.20 Metre high fencing with 2.0 Metre long

M.S. Angle posts 40 mm x 40 mm x 6 mm and oil painting 3 coats

fixed at 2.5 Mt, C/c. with five Horizontan lines and two diagonals of

galvanised steel barbed wire weighting 9.38 Kg. per 100 Metre,

strained and fixed to posts with G.I, staples including fixing the

posts in ground with 0.5 M x 0.5.M x 0.5 M. block in C.C 1:5:10 etc

102 2 complete. 385.4 Rmt

Renovation and Repairing work in Chainlink fencing any size and

also refixing work incl. febrication work with all materails to be

painted one coat of primer and twocoats of paint as directed inline

103 2 and level. (N.S.) 735 Rmt.

Constructing a sink (chowkedi) with C.C. 1:2:4, 12 cm. thick over

B.B. masonry in C.M, (1:6) in front and dwarf wall 1.0 Mt. high and 23 cm.

thick cement plaster to masonry / in C.M.1:3) and cement concrete

flooring in 1:2:4: mix 5cm.dia.drain pipe etc.complete.

Constructing a cooking platform 60 cm. width and 70 cm high resting

on B.B. Masonry walls 23 cm. thick in C.M. (1:6) with (i) Fixing or

precast R.C.C. 1:2:4) 8 cm. thick slab with marble chips set in C.M.

(1:6) (6 mm thick terrazo) with plastering on exposed faces walls

105 2 in C.M. (1:4) etc complete. 933.98 Rmt

Extra rate for using Ready Mix Concrete of any grade for below

ground level to vertical upto any floor with delivery & suction Pipe &

Pump etc. The rate includes fule, pump operator, skilled labor, driver

106 2 etc completed and as per direction of engineer in charge 760 Cmt

P/A Tremix with dewartering machine and floater machine on

constructed CC work for finishing the surface as per requirement.

The rate including all machinaries, labor, loading, unloading,

transportaion etc complete as per direction given by engineer

107 2 incharge. 54 Sq.M.

Carrying out timber treatment to all wood work including drilling holes and

spraying oil based chemical solution on surface of timber work for termite

control including labor and material etc. complete. Using Chlorpyriphos20

EC as per 6313 2013 Part III (1% concentration by mass) is recommended

one litre chemical emulsion diluted with 19 liters of kerosene. Total diluted

concentration will be 20 liters inclusive of 1 liter chemical emulsion

application in drilled holes and 0.75 / Litre chemical per one Sqmt two coat

on wood surface not protected by paint or varnish.

Applying general insecticide pest control treatment to floors, cupboards

etc including labour materials etc. complete. Using Imidacloprid 30.5 SCas

Per IS 6313 part -II( (0.075% concentration by mass) is recommended

10.5ml chemical diluted with 5 liters of water application 0.5 litre chemical

109 2 surface is recommended as per I.S. 88.4 Smt

Carring out plinth treatment to post construction / existing structure by

spraying chemical solution for termite control treatment including

labour and material consist ment with I.S. specification. Using

Chlordene and Chior purfiles 20 EC. As Per 6131_paret-II

Consentration Weight on percentis recommended i.e one litre 20 EC

chemical emulsion with 19 liter give 1% concrentration inclusive of

one litre chemical emulsion appication attherate of 5 Litre

chemical / Sqm of surface is recommended as per I.S

Carrying out wall treatment for termite control including spraying with

chemical solution in oil base including labour and material Using

Chlorpyriphos 20 ECAs per IS 6313 part - II (1% concentration by mass) is

2 recommended i.e one litre chemical

emulsion diluted with 19 liter oil base. Total solution will be 20 liters

inclusive of one liter chemical emulsion application at the rate of 7.5 litre

111 2 chemical / Sqm of surface is recommended as per I.S.S 37.34 Smt

Providing erecting and fixing double coated Syntex or equivalent

PVC.(ISI) water tank of required capacity each with all necessary

112 2 fittings and connection etc. complete on terrace. 3.91 Litre

Providing and fixing to wall, ceiling and floor galvanised Mild steel

tubes (Medium grade) of the following nominal bore, tube fitting

113 2 and clamps including making good the wall ceiling and floor.

2 (F) 50mm 779.6 Rmt

Providing and laying in trenches galvanised mild steel tubes

(Midium grade) of the following nominal bore, and tube fitting

(Earth work in trenches to be measured and paid for separately)

Making connection of galvanised Mild steel distribution branch with

galvanised mild steel main 50 mm to 80 mm nominal bore by

providing and fixing tee including cutting and threading the pipes

115 2 complete. 600.08 Each

Providing and fixing to wall ceiling and floor 6.0 Kg.F/Cm2 working

pressure poluthene pipes of the following out side Dia. Low

densidy, complete with special falnge compression type

fittings,wall clips etc.including making good the wall ceiling and floor.

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2 working

pressure polythene pipes of the following out side Dia. Low

densidy, complete with special falnge compression type fittings,

wall clips etc. including making good the wall ceiling and floor.

2 (C) 32mm 116.4 Rmt

Providing and fixing cast iron (Spun) Nahni trap of the following

nominal diameter of self cleaning design with C.I. screaed down or

higned grating including cost of cutting and making good the walls

and floor 100 mm inlet and 50 mm outlet.(C)100mm dia.

Providing and fixing water closet squatting Pan (Indian type

W.C.Pan) size 580 mm (Earth work, bed concrete, foot rest and

trap to be measured and paid for separately) (A) Vitreous China.

119 2 (I)Long pattern = White colour 926.1 Each

Provdg. & fixing wall mounted White / Color Vitreous China

European water closet with integral P trap of "Cera" - Clair

Series or equivalent incl. seat cover , Chair Bracket etc. complete as

120 2 per direction of engg. In charge.(N.S.) 4,250.00 No.

Providing and fixing wsh down water closet (Europe an type,

W.C.Pan) with integral P or S trap including jointing the trap with soil pipe

in Cement Mortar1:1 (1- Cement:1-fine sand) (Seal and cover to

be measured and paid forseparately) (A) vitreous China Pattern :(i)

121 2 in white colour 1290.8 Each

Provdg. & Fixing Flat Back Large Urinal of White/ colour of "Cera" or "

Hindware" incl. C.P. Brass waste coupline , waste pipe,

122 2 pvcconnection etc. Complete.( size 635 x395x420 mm ) 1,850.00 No.

Providing & Fixing Angle cock of " Ess Ess" - Trend series or

equivalent standard make as approved by engg. in charge all

123 2 complete. (N.S.) 675 No.

Providing and fixing 100 mm size P or S trap for water closet

124 2 squatting pan including jointing the trap with the pan and soil pipe in 311.85 Each

Providing and fixing wash basin with single hole for pillar tap with

C.I.or M.S. brackets painted white including sutting holes and making

good the same but excluding fittings. (A) Vitreous China: (ii) Flat

Back wash basin 550 mm x v 400 mm size.(i) In white colour.

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted

white including cutting holes in walls and making good the same

but excluding fittings. © Vitreous China Sink. (i) 600 mm x 450 mmx

126 2 150 mm size 2257.69 Each

Providing and fixing 600 mm x 450 mm bevelled edge mirrror of

superior glass mounted on 6 mm thick A.C. sheet or ply wood sheet

and fixing to wooden pluge with C.P. brass screws and washers.

Providing and fixing chromium plated brass halftrun flush cock of

128 2 approved quality including fixing in pipe line etc. complete.

Provdg. & fixing White / Color Vitreous china Counter wash basin

with signle hole for pillar tap of "Cera " - Concord series of

x425 mm size to be fiited in stone counter with necessary brackets

painted white incl. cutting holes and making good the same .Cost

Includes P/F C.P. brass waste coupline, 32 mm dia fisher union

mm dia. Pillar cock & Angle cock of " Ess Ess"- Trend series ,32 mm

dia. Waste pipe etc. complete as per dir. of engg. in charge.

Providing and fixing washbasin with single holefor pillar tap with C.I. or

M.S. brackets painted white including sutting holes and making goodthe

same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin

130 2 550 mm x v400mm size. (i) In white colour. 1400.18 No

Providing & Fixing S.S.304 Grade Sink of Nirali / Krishna or

Equivalent Make for Kitchen Platform of size : 24":x18" as per

131 2 Direction of engg. In charge 4,650.00 No.

Providing and fixing C.P. brass towel rail comlete with C.P.brass

brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm

132 2 x 20mm size. 597.22 Each

Providing and fixing 600 mmx120 mm glass shelf with C.P. brass

bracket and guard rail complete mixed to wooden plug with

133 2 C.P.brass screws. 561.03 Each

134 2 Providing and fixing toilet paper holder. (A) C.P.Brass 414.53 Each

Providing and fixing screw down bib taps of following size. (A) Brass

135 2 screw down bib tap polished bright.

2 (i) 15mm dia. 184.98 Each

2 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of following size. (B) Brass

136 2 chromium plated screws down Bib Tap.

2 (i) 15mm dia. 184.98 Each

2 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of following size. © Gun

137 2 metal screw down bib tap.

2 (i) 15mm dia. 157.29 Each

2 (ii) 20mm dia. 176.09 Each

Providing and fixing pillar tap, capstan head, screw down high

138 2 pressure with screws, shanks and back nuts.

2 (i) 15mm dia. 305.67 Each

2 (ii) 20mm dia. 351.18 Each

Providing and fixing Gun metal check or non-return fullway wheel

2 (i) 15mm dia. 184.98 Each

2 (ii) 20mm dia. 201.8 Each

2 (III) 25 MM DIA 416.47 Each

2 (E) 40mm dia 656.86 Each

Providing and fixing chromium plated brass half trun flush cock of

140 2 approved quality including fixing in pipe line etc. complete.

2 (i) 20mm dia. 252.26 Each

2 (ii) 25mm dia. 261.16 Each

2 (iii) 32mm dia. 273.03 Each

Providing and fixing Urinal or approved quality including

conecting the Urinal with waste pipe , tap etc.complete. (A) White

earthen ware flat back or corner type size 430mm x 260mm x

Providing and fixing Urinal of approved quality including

connection with trap and with integral longitudinal flush pipe. (A)

Squating plate pattern white earthen ware 550mm x 300mm.

Providing and fixing chromium plated, bottle trap with necessary

143 2 couplings of approved quality for wash basin. 292.87 Each

Providing and fixing ball cock ofapproved quality as directed. (A)

144 2 Copper Metal (i) 25mm dia. 131.57 Each

Providing and fixing ball cock of approved quality as directed.

145 2 (B)Abonite (i) 25mm dia. 101.89 Each

Filling with good Quality thor as and where directed by the

Architect / Engineer-in-charge, in sunk in layers of 15 cm. thickness,

including watering, ramming well etc. complete, as directed by the

146 2 Architect / Engineer-in-charge . 3,850.00 Cmt

Providing laying and jointing in true line and level 15 mm dia. U.P.V.C.

Pipe (SCH-40) for cold water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with solvent, including cost of all

147 2 materials.adhesive 71.93 Rmt

Providing laying and jointing in true line and level 25 mm dia. U.P.V.C.

Pipe (SCH-40) for cold water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX orequivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all

148 2 materials. 90.93 Rmt

Providing laying and jointing in true line and level 32 mm dia. U.P.V.C.

Pipe (SCH-40) for cold water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all

149 2 materials. 117.97 Rmt

Providing laying and jointing in true line and level 40 mm dia. U.P.V.C.

Pipe (SCH-40) for cold water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all

150 2 materials. 146.65 Rmt

Providing laying and jointing in true line and level 50 mm dia. U.P.V.C.

Pipe (SCH-40) for cold water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all

a 2 materials. 193.73 Rmt

Providing in line level plumb, fabricating and fixing three row

horizontal barbed wire fencing and punched tape concertina coil of

turns per meter of 610 mm dia fixed with clips on top of the angle iron

posts. The punched tape concertina coil having sharp barbs at every

25 mm spacing shall be 0.5 mm thick and 19 mm width and weighting

13 kg/100 mt. (Average) as per manufacture's specification. The rate

shall also include providing and fixing 1.20 mt.total long MS angle

40 x 40 x 6 mm @3.00 mt.c/c spacing embaded in RCC column, angle

posts shall be painted with one coats of red oxide and two coats of

enamel paint of approved quality at top compound wall.

Fixing sun film for protection sunlight in black or any colour as as directd

152 2 by engineer In Charge.(Market rate) 850 Smt

Providing & Fixing 3 mm thick F.R.P.sheet of Approved Quality &

Color / Pattern as per Consultant's design also includes required

fabrication structure in the grid of 2'-0x2'-0 size using hollow pipe

of16 gauge & size 2"x1" & 1"x1" ,G.I. & Bitumen Washers, Silicon

paste application for fixing the sheet . Rate also includesnecessary

bending, cutting, labor charges , Zinc Primer coat & Two coats of oil

painting of color as approved by consultants & making good the wall.

Providing 2 mm thick F.R.P. Gutter with necessary M.S. Supporting

154 2 Brackets. (N.S.) 400 Rmt

Hiring charges for J.C.B.machine inclduing cost of fuel, operator,

155 2 dirver etc.. ( 12 hours sift day/night) (N.S.) 600 Hrs.

To provide tractor with hydraulic trolley, driver, 4 Nos. of Labor with all

tools like bucket drum, showels, trikam, pavadas, etc,, to

carryout different works during monsoon for 12 Hrs. Shift. Work shall

be carried out as per the instrucitons of Engineer In-Charge.No extra

156 2 charged shall be paid for night shift. 1,661.02 No.

Roller Blind Providing and fixing Roller Blind curtain fixed on

window level on wooden batten and curtain lift with cotton thin

rope, make of aerolax or equivalent design and colour as per

instruction by engineer – in – Charge with necessary hardware fitting,

157 2 material and labour etc complete. 3,285.00 Smt

Providing & Fixing Door closer - Door closers (Heavy type of 765 number)

158 2 Hardwire or Everite Prabhat or Equivalent 474.58 No.

Providing and fixiing M.S. Fan clamps type 1 of 16 mm dia M.S. bar bent

to shape with hooked ends of R.C.C. slabs during laying incl. painting the

exposed protion of loops, all as per standard design complete.

Providing cement vata (10cm. x 10 cm. size) quarter round in cement

160 2 mortar 1:1 including neat cement finishing, watering etc. complete. 23.45 Rmt

161 2 Making Water connection from exi.Muni. Water line (N.S.) 250 No.

Providing and applying fibere reinforced cementitious micro

concrete work in cellings and beams incl.mixture of

CEMSCREED HM (F) fair mate company material, FBR bonding

agent material with water in suItable proportion anti corrosive

treatment on exposed beam,celling steel bars with safeCore R incl.all

kind of labour etc.comp.including three coat of white

162 2 wash.(Approved Rate) 530 Smt

Providing and Fixing 1 H.P. Electrical monoblock or submarcible water

pumps withmotor and required cable and switch board of approved brand

163 2 and make etc.comp.as directed. 6,800.00 Set

.Providing TMT Bar FE 415 reinforcement for R.C.C. work including

163 a 2 bending, binding and placing in position complete up to floor two level 66.59 Kg.

ProvidingTMTBarFE500/500Dreinforcement for R.C.C.workincluding

bending,binding and placing in position complete upto floor two level

placing in position complete upto floor two level placing in position

b 2 complete upto floor two level 75.46 Kg.

Providing and fixing 30mm thick solid both side prelam PVC door shutter

(sintex door-equivalent) with necessary alluminium fitting with EL-7 section

164 2 frame 2,867.00 Smt

Conveyance charge of Earth,Lime, Murrum, building rubbish earch

manure or sludge and excavated rock and fly ash,aggregate of any kind

165 2 etc.comp.upto 5 km lead.(L.S.) 235.51 Cu.M.

Providing and laying polished granite stone slab 18 mm thick in risers of

steps, dedo and pllars laid on 10 mm thick cement mortar 1:3 (1 cement:3

166 2 coarse sand) and jointed with gray cement slurry including rubbing & 2,690.00 Smt

polishing etc.complete.

Providing and laying 15mm bamboza wooden flooring as per

architect's drawing with all necessary details as directed by

the project consultants. Use underlay for better result as per

Detail specifications and directed by the project consultants. (N.S.)

168 2 (Approved Rate ) 2,690.00 Smt

Applying two coats of Birla (whitecementbased) or Asian

(acryliclapy-putty) or equivalent & two coats of primer of approved

brand and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar dropping

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape evenshade after thoroughly brushing

the surface to remove all dirt, and remains of loose powdered

170 2 materials.etc complete 113.4 Sq.M.

Providing and fixing flush door shutters, solid core construction

with frame of first class hardwood with cross board and face veneer

or plywood face panels, with both side 1 mm laminate finishing

including anodized aluminum butt hinges with necessary screws.

Decorative type and pine wood core anodized minimum 3 no

mm long aluminum butt hinges in flush door shutters with 2 no of

brass holdfast 325 mm long 1 no brass tower bolt 250 mm long and

two no of 150 mm long brass door handle . Decorative both side

laminated Flush door 35 mm thick. with frame of 10 cm x 7 cmt

Indian teak wood frame including all necessary fitting fixtures

hardware screw and adhesive etc fixing up to all lead and lift height

up to 45 mtr from GL etc complete as per direction of engineer in

P/M/F chainlink jali 8'x4' size as per details sketch & instructionof engineer

in charge same as lal darwaja garden pattern consisting of 3'dia. M.S

black pipe 'A' class 5'4" ht. fixed at 8'9" c/c in C.C 1:2:4 block of 9"x9"x9"

size chain link jali of size 2"x2"x10 gauge fixed in 35x35x5 mm MS angle

frame 8'x4' size with MS flat of size 25x3 mm welded jali etc.comp.The jali

is to be welded to MS pipe with MS flat as instruction given.The M.S pipe

and the M.S angle frame are to be painted one coat of primer and two

coats of paint as directed in line and level. (N.S)

Providing & Fixing masonary wall with porbandar lachiya stone with well

dressed grooveas per directed by engg.in charge for foundation, plinth or

super structure level (above plinth level upto floor two level) in cement

mortar 1:5 (1-cement : 5-fine sand) incl.pointing the joint with white

cement and yellow oxide powder in proportion to match stone colour the

joints should be thread grooved as per exi. lake stone pitching apperance

2 (A) stone masonary wall/stone dressed single faced (size 15"x8"x9") 8,990.00 Cmt

2 (B) stone coping (size 15"x8"x4") 510 Rmt

2 (C) stone coping (size 15"x8"x9") 790 Rmt

2 (D) stone column (size 15"x15") 10,710.00 Cmt

2 (E) stone column top (size 20"x20"x9") 685 No.

Supplying and fixing of 300 mm-L x 15 mm-B x 380 mm-H Kerb block

for Footpath in M-20 grade using 20 mm nominal size black trap

aggregate of Sevaliya/Timbaor equivalent quality for pre-

cast blocks, reasonablyexposed finish/ formwork , mould

with well equippedwith vibratory system for kerb stones of

approved design including curing, etc. complete, including thecost of

formwork etc. complete. The rate shall also include necessary

cutting of asphalt, fixing the Kerbstones in line and level on 5 cm

thick sand bedding withnecessary equipments and

materials. The rate shall also include the flush pointing in CM (1:3) for

all joints of thekerbstones. Filling of zari alone the sides of the

kerbstone fixed with Bituminous concrete Bituminousconcrete /

C.C. mixed in proper position to flush withthe road surface as

directed by Engineer in change to form a portable mixture.a)

Laying on 5 cm thick Sand Bedding

Providing and Laying of Rubber Moulded Paver Block Grey/Coloured

mm thick, M-35 Grade of any size shape (Usually Uni-Paver Blocks) using

black trap good quality aggragate of 20 mm nominal size for

footpath,parking areas, service lanes and other areas as mentioned in the

drawing / instruction of engineer in charge. Cost includes formworks using

rubber mould, Rate providing and laying paver blocks as per required

grading and specification. The paver block shall be mechanically

compacted. The work of paving blocks shall be executed in line and level

by skill mason of flooring work only. It should be laid in such a way that the

no cutting of the paver block to be necessary. if cutting of paver block

necessary then it should be cut by machine only and carting. The finished

surface of the paver block shall have resonably good, plain finished. Paver

blocks shall be compacted and shall be relaid if necessary. Gravel or such

type of materials shall not be allowed for production. Laying on 5 cms thick

Provoding and fixing flush door shutters, solid core construction with

frame of first class hard wood with cross board and face veneer or ply

wood face panels, including anodised alluminium butt hinges with

necessary screws. (B) Non- decorative type and block board core

anodised alluminium butt hinges in flush door shutters (2) 35 mm thick.

Labour work for fixing any kind of paving with cement pointing in CM 1:2,

176 2 including watering, ramming etc comp. as dir.For pavement 1779.97 Smt

I) Laying on Sand bedding as per requirement to fix the C.C.Block /

177 2 Nibhada Stone in Line & Level 78 Smt

Box type metal letters forming composite box made from 1mm thick

stainless steel plate of grade 304 having brush finish of following font size

to be fixed at Main Gate in english and or Gujrati and including fixing

178 2 charges approved before fixing by clent / consultant.

A 2 400mm high 1,000.00 Nos.

B 2 300 mm high 750 Nos.

C 2 230 mm high 565 Nos.

Providing and fixing false ceiling at all height including providing and fixing

of frame work made of special sections, power pressed from M.S. sheets

and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as

per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm

thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one

flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long

with 6mm dia bolts, other flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts & bolts of required size and

other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9

mm running at the spacing of 1200 mm centre to centre, to which the

ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges

of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall

be fixed in a direction perpendicular to G.I. intermediate channel with

connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at

every junction, including fixing perimeter channels 0.5 mm thick 27 mm

high having flanges of 20 mm and 30 mm long, the perimeter of ceiling

fixed to wall/partition with the help of rawl plugs at 450 mm centre, with

25mm long dry wall screws @ 230 mm interval, including fixing of gypsum

board to ceiling section and perimeter channel with the help of dry wall

screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing

to a flush finish of tapered and square edges of the board with recomme-

nded jointing compound , jointing tapes , finishing with jointing compound

in 3 layers covering upto 150 mm on both sides of joint and two coats of

primer suitable for board, all as per manufacturer’s specification and also

including the cost of making openings for light fittings, grills, diffusers,

cutouts made with frame of perimeter channels suitably fixed, all complete

as per drawings, specification and direction of the Engineer in Charge but

Providing & Fixing SPEED BUMP - #2 No (1 black, 1 yellow) 350 x 500 x

50 mm, Size per color End Cape 350 MM x 175 MM x 50 MM TOP

DESIGN - Lining Top flat ANTI SKID PATTERN FOR GRIP COLOUR :-

YELLOW & BLACK BODY MATERIAL :- MODIFIED

THERMOPLASTICS (Polymer Rubberized ) • ECO FRIENDLY

RECYCLE RUBBER Packing :- 4 pcs/ woven Bag Load Capacity :-

MT Fitting ( Fixing on TRAKE) :-4 holes & END CAPE :- 2 HOLE HEX

Bolts with Washer Epoxy for Bolt Fitting etc. complete as directed by EIC

Providing and fixing of Roller blind curtain/blackout. The fabric shall be

woven from formulated platisol extruded over a polyaster yarn.The fabric

shouldl be weaved to provide subtle view of the side of the blind and

should offer elimination of glare and sunlight radiance upto a minimum of

181 2 80%.The fabric shall be flame retardant. 2,610.00 Smt

Providing and fixing PVC/Gpsysum plain colour false ceiling with grid

type with aluminium frame from gypsteel, fastners ,props, Finishing

as per architectural drawing allowing openings for A.C.

Diffusers, Light/Electrical Points etc –complete, Prior to fixing on

frame.(Brand : Anutone or equivalent ) (N.S.) or as directd by

182 2 engineer In Charge. 933 Smt

Provdg. & laying S.W. Gully trap with brick masonry chamber & water tight

G.T.Stone including fixing of covervSquare mouth trap 100 mm x100 mm

183 2 size P-Trap 1,263.15 No.

Providing cement vata (10cmx10cmsize) quarter roundin cement mortar

184 2 1:1 including neat cement finishing, waterin getc. complete. 23.45 Rmt.

Providing and laying (to level or slopes) and jointing with stiff mixture of

Cement Mortar in proportion 1:1 Salt glazed stoneware pipes including

185 2 testing of pipes and joints complete.(A) 100mm dia. 211.05 Rmt.

Providing and laying (to level or slopes) and jointing with stiff mixture of

Cement Mortar in proportion 1:1 Salt glazed stoneware pipes including

186 2 testing of pipes and joints complete.(B) 150mm dia. 288.23 Rmt.

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to be not less than

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe

with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(i)Inside dimensions 500mm x

mm and 450mm deep for pipe line with one or two inlets.

Providing, supplying and fixing precast C.C. blocks (M-20) edge kerb

having size of 75 x 300 x 300 mm depth and as per design conveying it to

the site, jointing into C:M 1:3 and racking out the joints incl. necessary

189 2 excavation of asphalt, soil etc..completed. 219 Rmt.

Constructing a cooking Sandwich platform 60 cm. width and 70 cm high

resting on B.B.Masonry walls 23 cm.thick in C.M.(1:6) with (ii) Fixing black

Granitee 30mm thick laid on precast R.C.C. (1:2:4) slab with plastering on

190 10 exposed faces of wall in C.M. (1:4) etc complete 754.95 Rmt.

Providing and fixing hard drawn steel wire fabric 75mm x 25mm mesh or

weight not less than 7.75 kg. per Sq.M. to window frames etc. including60

191 10 x 20mm beading of teak wood. 754.65 Smt

Providing & fixing 15 cm wide chicken mesh jali with nails & then

application of 15 mm plaster on R.C.C.& masonary joints as per dir.of

192 10 engg.in charge 35 Rmt.

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-

graded stone aggregate 20mm nominal size) laid in one layer and finished with a

193 10 floating coat of neat cement. (A) 50mm thick. 348.08 Smt.

Providing and constructing, Underground (U/G) water tank of specified capacity,

on specified location, for all depths, in controlled CC of M-200 grade with bottom

slab, top slab and RCC walls, including cost of form work and reinforcement,with

inside and outside plaster in CM 1 :3 and water proofing treatment as per IWP

specification,including injection, grouting, etc. complete. The rate includes for

providing and fixing two nos. 0.6m. x 0.6 m. size medium duty CI manhole

cover/s at top, including wash out pipe line and inlet and outlet connections etc.

194 8.4 complete. 6.5 Litre

Providing and fixing PVC Printed pain colour false ceiling with grid type with

alluminium frame consisting of 600mm x 600mm 3mm thick plain PVC sheet

used as panel insert in a frame work made using anodized alluminium T section

of size 1 x 1 (235 x 25mm, 19 gauge or 1 mm thick) in square pattern of grid sizes

of 2 x 2 (600 x 600mm) The alluminium frame work is supported from the

cceiling with the help of G.I. hook and G.I. wire/6mm M.S. rods of required sizes

to maintain proper level etc. The aluminium frame work is supported on side wall

with the use of alluminium L section of size 1 x1 (25 x 25mm) angles etc.

complete as per direction of Engineer in charge. Manufactures specification and

195 10.02 drawing. 300.12 Smt

Providing and supplying of labour for necessary manual excavation, cleaning,

Shifting of Material Or any other, or for any other work as directed by Engineer In

196 10 charge. The Rate includes Handcart with Mazdoor 551 No

A 10 Mukadam/supervisior/karigar 425 No

B 10 Fitter/Plumber/Mason 697 No

C 10 WELDER/ Gas cutter at Day /night 689 No

Supplting of welding machine / gas cutter including cost of welding rods/gas,

D 5 Transportation, including carting from site to work place. 1500 No

E 12 Mazdoor at Day Female 450 No's

E 12 Mazdoor at Day Male 493 No's

Supplying electric breaker machine for RCC slab or asphalt demolishing work on

site by using operator, fuel, power supply etc.complete as directed. (no payment

should be allowed for non working condition of machinery and for pipe line

excavation and M.H. work. Allowed only for break down work) (Based on

197 5 Previously approved rate by CE sir ) 1071.42 Shift

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of

following dia. Nominal bore tube fittings and clamps including making good the

198 10 wall, ceiling and floor etc. complete.

A 2 15 MM DIA 165.21 Rmt

B 2 20 MM DIA 202.97 Rmt

C 2 25 MM DIA 247.25 Rmt

D 2 32 MM DIA 330.36 Rmt

E 2 40 MM DIA 437.66 Rmt

199 2 50 MM DIA 647.3 Rmt

Supplying and fixing C.I. cover 300mm x 300mm without frame for Gulley trap

200 2 (Standard pattern) te weight of cover to be not less 4.53 Kg.) 491.8 Each

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2 working pressure

polythene pipes of the following out side Dia. Low densidy, complete

with special falnge compression type fittings, wall clips etc. including

201 2 making good the wall ceiling and floor.

Filling available excavated earth(excluding rock) in trenches. plinth, sides of

202 foundations etc. in layers not exceeding 20 cm. in depth consolidating each 129.1 cumt

5 disposited layer by ramming and watering.

Filling in plinth with sand under floors including watering ramming, consolidating

2 and dressing complete

Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

thickness including watering, ramming and consolidating etc. complete

Filling in Sunken Portion with good Quality Aerated light weight concrete block

having crushing strength not less than 35 kg/sqcm and where directed by the

205 Architect / Engineer-incharge, in sunk in layer. including watering, ramming 4559.61 cumt

where it is required etc. complete, as directed by the Architect / Engineer-in-

Providing and applying fibre reinforced elastomeric liquid water proofing

membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of

105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-

priming of elastomeric waterproofing liquid (dilution with water in the ratio of

206 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film 562.4 sq mt

thickness of complete application/system not less than 500 microns).

The operation shall be carried out after scrapping and properly cleaning the

surface to remove loose particles with wire brushes, complete in all respect as

10 per the direction of Engineer-in- Charge.

Providing and laying integral cement based water proofing treatment including

207 preparation of surface as required for treatment of roofs, balconies, terraces etc 1150.48 sq mt

1.408 consisting of following operations:

(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed

with water proofing compound conforming to IS. 2645 and approved by Engineer-

in-charge over the RCC slab including adjoining walls upto 300 mm height

including cleaning the surface before treatment.

(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to

mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with

water proofing compound conforming to IS : 2645 and approved by Engineer-in-

charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse

sand ) admixed with water proofing compound conforming to IS : 2645 and

approved by Engineer-in-charge to required slope and treating similarly the

adjoining walls upto 300 mm height including rounding of junctions of walls and

(c) After two days of proper curing applying a second coat of cement slurry using

2.75 kg/ sqm of cement admixed with water proofing compound conforming to

IS : 2645 and approved by Engineerin- charge.

(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1

cement :4 coarse sand) admixed with water proofing compound conforming to IS

: 2645 and approved by Engineerin- charge

(e) The whole terrace so finished shall be flooded with water for a minimum

period of two weeks for curing and for final test.“All above operations to be done

in order and as directed and specified by the Engineer-in-Charge :and shall be

guaranteed for minimum period of 10 years after handing over the completed

building by the main contractor to be finished as directed. Stamp

paper guarantee 10 years to be furnished before receiving any payment from the

With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Rapairing of Auditorium Chair . It Including material charges and Labour Charges

208 88.00 For Erection And Fixing Spring for smooth and easy pushback system. 523.00 No

Supply and Fixing of Auditorium seating Fabricate Auditorium seating with

Synchronized Push back Chair with Ergonomically designed Poly Urethane foam

for seat and back made my DOW chemical with High Pressure moulding

technology to achieve long life performance, upholstered with stitched 3 Layer

100% Yarn Dyed fabric Upholsteries. Chair profile with the seat in Normal

position and without a tablet arm should not be more than 75 cm. Chair

pushback mechanism should consist of 2 nos. x DIA 50 mm ZYTEL Based Rollers

which is supported by AXIAL shaft of DIA 12 mm is Driven by radial movement of

4 set of Swing Arms of size 25mm x 6 mm thickness with

Orbital Riveted Solid Dia 8 mm Barrel MS Rivets. The pushback movement is

209 2.00 achieved by synchronised movement of 04 links mounted on Two Number of 9990.00 No

triangular Symmetrical housing of size 27 cm x 23 cm duly embossed for extra

strength by 1.2 cm made up by 0.12 cm CRCA compliance to IS 513. The entire

mechanism should be made in India and should have total weight 8.5 kg duly

Powder Coated – NO SPREAY PAINT Part should be used for the chair of The Seat

Size should be 42 cm x 48 cm the Back height should be 70 cm with

ergonomically designed seat and back cushions. Chair should be available in 20”,

21”, 22” and 23” to use multiple seat size in one layout for

matching variable arch length. Approved Make WIPRO, Godrej, TSI, HNI,

Featherlite (Including Fitting and Transportation)