Fire Fighting System

Item Rate In

(with brief specification and reference to book Quantity Unit Amount

No. Figure

of specifications)

[1] Fire Fighting Fire Pump Room & Accessories 2.00 No 256742.00

Supplying, Installation, Testing and commissioning

of Electric driven Main Fire Hydrant pump suitable

for automatic operation and consisting of following:

Horizontal type, centrifugal End Suction pump of

cast iron body & bronze impeller, mechanical seal to

ensure a minimum pressure of 3.5 kg / sq.cm. at

highest and farthest outlet at specified flow of

137m3/Hour@ 70M. head with M.S. fabricated

common base plate, coupling, coupling guard,

foundation bolts etc. as required

[2] Supplying, Installation, Testing and commissioning 1.00 No 469650.00

of Diesel engine driven fire pump suitable for

automatic operation and consisting of following:

Horizontal type, centrifugal End Suction pump of

cast iron body & bronze impeller, mechanical seal to

ensure a minimum pressure of 3.5 kg / sq.cm. at

highest and farthest outlet at specified flow of

137m3/Hour@ 70M. head conforming to IS

with M.S. fabricated common base plate, coupling,

coupling guard, foundation bolts etc. as required

[3] Supplying, Installation, Testing and commissioning 1.00 No 103525.00

of Jockey Pump 10.8M3/hour @70M Head.

Horizontal Centrifugal End Suction. with M.S.

fabricated common base plate, coupling, coupling

guard, foundation bolts etc. as required

[4] Supplying, Installation, Testing and commissioning 1.00 No 128702.28

of cubical type floor mounted power cum Fire Pump

control panel complete with suitable switch gear,

bus bars, relays, contractors, indicating lamps,

fuses, instruments manual isolator & auxillary

switch including connections complete as

required.(Contractor should submit GA Drawing for

approval before deliver the Panel at Site)

[5] Providing, fixing, testing and commissioning below 30.00 MTR 281.59

Caballing work for Fire Pumps (Only from Panel to

Pumps) 3 C X 35 Sqmm Alluminium Armoured

[6] Providing, fixing, testing and commissioning below 30.00 MTR 177.23

Caballing work for Fire Pumps (Only from Panel to

Pumps) 3 C X 16 Sqmm Alluminium Armoured

Description of Item

Item Rate In

(with brief specification and reference to book Quantity Unit Amount

No. Figure

of specifications)

[7] Providing, fixing, testing and commissioning below 150.00 MTR 110.15

Caballing work for Fire Pumps (Only from Panel to

Pumps) 2 C X 1.5 Sqmm Copper Armoured.

[8] Providing, fixing, testing and commissioning below 15.00 MTR 343.70

Caballing work for Fire Pumps (Only from Panel to

Pumps) Perforated G.I.sheet cable tray Cable Tray

[9] Providing, fixing, testing and commissioning below 20.00 MTR 244.32

Caballing work for Fire Pumps (Only from Panel to

Pumps) Perforated G.I.sheet cable tray Cable Tray

[10] Cutting hole by Mechanical Means of upto 200 mm 50.00 Nos 662.56

dia in slab/beam throughout the thickness

[11] Providing, fixing, testing & commissioning of 4.00 Nos 1325.12

Glicerin Filled dial type Pressure Gauge and range of

[12] Providing, fixing, testing & commissioning of 3.00 Nos 993.84

Pressure Switches for automation of fire pumps.

Pressure switches shall be double pole single throw

type suitable for 3 phase supply with diaphragm.

Aluminum Enclosure with IP 66 protection as

required..

[13] Supplying, Installation, Testing and commissioning 3.00 Nos 5052.02

of C.I. Butterfly valve conforming to I.S: 13095 class

PN 16 rating with Fittings, Flanges, Nutbolts,

Washers, Gaskets etc. of size: 150mm dia. (For fire

pump room & Accessories)

[14] Supplying, Installation, Testing and commissioning 1.00 Nos 3726.90

of C.I. Butterfly valve conforming to I.S: 13095 class

PN 16 rating with Fittings, Flanges, Nutbolts,

Washers, Gaskets etc. of size: 100mm dia (For fire

pump room & Accessories)

[15] Supplying, Installation, Testing and commissioning 1.00 Nos 3105.75

of C.I. Butterfly valve conforming to I.S: 13095 class

PN 16 rating with Fittings, Flanges, Nutbolts,

Washers, Gaskets etc. of size: 80mm dia. (For fire

pump room & Accessories)

[16] Supplying, Installation, Testing and commissioning 3.00 Nos 2650.24

of C.I. Butterfly valve conforming to I.S: 13095 class

PN 16 rating with Fittings, Flanges, Nutbolts,

Washers, Gaskets etc. of size: 50mm dia. (For fire

pump room & Accessories)

Description of Item

Item Rate In

(with brief specification and reference to book Quantity Unit Amount

No. Figure

of specifications)

[17] Providing, fixing, testing and commissioning of C.I. 4.00 Nos 7205.34

Dual plate type Non-Return Valve class PN 16 rating

with fittings, flanges, nutbolts, washers, gaskets etc.

of sizes: 150mm dia (For fire pump room &

Accessories)

[18] Providing, fixing, testing and commissioning of C.I. 2.00 Nos 4223.82

Dual plate type Non-Return Valve class PN 16 rating

with fittings, flanges, nutbolts, washers, gaskets etc.

of sizes: 80mm dia (For fire pump room &

Accessories)

[19] Providing, fixing, testing and commissioning of C.I. 3.00 Nos 2898.70

Dual plate type Non-Return Valve class PN 16 rating

with fittings, flanges, nutbolts, washers, gaskets etc.

of sizes: 50mm dia (For fire pump room &

Accessories)

[20] Supply, Installation, Testing and Commissioning of 23.00 Nos 1242.30

S.S. Ball Valves with all fittings required. 25mm dia.

(For fire pump room & Accessories)

[21] Supply, Installation, Testing and Commissioning of 7.00 Nos 1159.48

S.S. Ball Valves with all fittings required. 15mm dia.

(For fire pump room & Accessories)

[22] Providing, fixing, testing and commissioning of 24.00 MTR 2059.73

Above Ground MS. ERW Black C Class Heavyduty

pipes as per IS: 1239 (upto 150 mm dia.) and IS:

3589 (upto 200 mm dia. And above) including

cutting, screwing, welding etc. and providing all

fittings like flanges, bends, tees, elbows, reducers,

clamps, hangers etc. with painting of one coat of

primer and 2 or more coats of synthetic enamel

paint of approved make / shade complete as per

specification. 150mm dia

[23] Providing, fixing, testing and commissioning of 12.00 MTR 1391.38

Above Ground MS. ERW Black C Class Heavyduty

pipes as per IS: 1239 (upto 150 mm dia.) and IS:

3589 (upto 200 mm dia. And above) including

cutting, screwing, welding etc. and providing all

fittings like flanges, bends, tees, elbows, reducers,

clamps, hangers etc. with painting of one coat of

primer and 2 or more coats of synthetic enamel

paint of approved make / shade complete as per

specification. 100mm dia

Description of Item

Item Rate In

(with brief specification and reference to book Quantity Unit Amount

No. Figure

of specifications)

[24] Providing, fixing, testing and commissioning of 6.00 MTR 984.73

Above Ground MS. ERW Black C Class Heavyduty

pipes as per IS: 1239 (upto 150 mm dia.) and IS:

3589 (upto 200 mm dia. And above) including

cutting, screwing, welding etc. and providing all

fittings like flanges, bends, tees, elbows, reducers,

clamps, hangers etc. with painting of one coat of

primer and 2 or more coats of synthetic enamel

paint of approved make / shade complete as per

specification. 80mm dia

[25] Providing, fixing, testing and commissioning of 12.00 MTR 613.70

Above Ground MS. ERW Black C Class Heavyduty

pipes as per IS: 1239 (upto 150 mm dia.) and IS:

3589 (upto 200 mm dia. And above) including

cutting, screwing, welding etc. and providing all

fittings like flanges, bends, tees, elbows, reducers,

clamps, hangers etc. with painting of one coat of

primer and 2 or more coats of synthetic enamel

paint of approved make / shade complete as per

specification. 50mm dia

[26] Providing, fixing, testing and commissioning of 6.00 MTR 297.32

Above Ground MS. ERW Black C Class Heavyduty

pipes as per IS: 1239 (upto 150 mm dia.) and IS:

3589 (upto 200 mm dia. And above) including

cutting, screwing, welding etc. and providing all

fittings like flanges, bends, tees, elbows, reducers,

clamps, hangers etc. with painting of one coat of

primer and 2 or more coats of synthetic enamel

paint of approved make / shade complete as per

specification. 25mm dia.

[27] Supplying, installing and commissioning of Foot 2.00 Nos 15321.70

Valve with, suitable flanges, nuts, bolts, gaskets etc.

complete. 150mm dia

[28] Supplying, installing and commissioning of Foot 1.00 NO 10269.68

Valve with, suitable flanges, nuts, bolts, gaskets etc.

complete. 80mm dia

[29] Supplying, Installation, Testing and commissioning 4.00 No 5052.02

of C.I. Butterfly valve conforming to IS:13095 class

PN 16 rating with Fittings, Flanges, Nutbolts,

Washers, Gaskets etc. of size: 150mm dia (for Fire

Hydrant System piping & Accessories)

[30] Providing, fixing, testing and commissioning of C.I. 2.00 No 7205.34

Dual plate type Non-Return Valve class PN 10 rating

with fittings, flanges, nutbolts, washers, gaskets etc.

of sizes: 150mm dia (for Fire Hydrant System piping

& Accessories)

Description of Item

Item Rate In

(with brief specification and reference to book Quantity Unit Amount

No. Figure

of specifications)

[31] Fire Fighting Equipement Providing, fixing, testing 16.00 No 5134.84

and commissioning of SS Single Headed Oblique

Pattern Hydrant Landing Valves as per IS:

with 80 mm dia flanged inlet & 63 mm dia female

outlet complete with cap and chain etc.

[32] Providing, fixing, testing and commissioning of SS 16.00 No 1656.40

Branch Pipe with nozzle of 25 mm nominal bore

outlet suitable to fit with standard instanteneous

type 63 mm dia coupling. As per IS:903

[33] Providing, fixing, testing and commissioning of 63 32.00 Nos 3892.54

mm dia 15m long RRL Hose Pipe with 63 mm

dia.Type A Male and female Stainless Steel

couplings duly binded with GI wire, rivets etc.

conforming to IS 636 as required.

[34] Providing, fixing, testing and commissioning of 16.00 Nos 3561.26

weather proof standard fire Hose Cabinet wall

mounting type 18 Guage. (750 x 600 x 250) having

Double Opening with M.S. fabricated stand,

necessary locking arrangement by allan key.

[35] Providing, fixing, testing and commissioning of Wall 12.00 Nos 5797.40

mounting Fix type First aid Fire Hose Reel with

drum, hanging bracket, 36 M x 25 mm dia high

pressure hose reel tubing as per IS:884 with shut

nozzle and ball valve and all required accessories.

[36] Providing, fixing, testing and commissioning of CI 1.00 Nos 12008.90

Four way Fire Brigade Inlet as per IS: 904 having

mm dia inlet with 150 mm dia Butterfly valve blank

cap and chain with necessary fittings, flanges,

nutbolts etc. (For System filling & Tank Filling)

[37] Providing, fixing, testing and commissioning of Two 4.00 NO 11180.70

Way Fire Brigade Inlet for Draw Out Connection

with 100mm dia Foot Valve. blank cap and chain

with necessary fittings, flanges, nutbolts etc. (Make:

Shah Bhogilal/ Safex/ Winco)

[38] Providing, fixing, testing and commissioning of 25 4.00 Nos 1325.12

mm dia Air Release Valve and Ball Valve assembly

on top of each riser for Air release system.

[39] Providing & fixing Gypsum board false ceiling as per 350.00 SMT 653.47

architectural drawing using M.S. 'E' bottom channel

frame work average 450 mm x 450 mm c/c grid,

vertical 'L' & 12.5 mm thick Gypsum board sheet of

Saint Gobain with providing boxes for lighting

arrangement including all fixtures and fastening etc.

Description of Item

Item Rate In

(with brief specification and reference to book Quantity Unit Amount

No. Figure

of specifications)

[40] Refilling of ABC Dry Chemical Powder type 6 Kg. 44.00 Each 737.30

capacity fire extinguisher & Services of valve,

pressure gauge, hose pipe, cap, hone, container,

body bolt etc. including all labour, material &

carting etc complete as per instruction of Engineer

[41] Automatic Fire Sprinkler System Providing, fixing, 425.00 MTR 2059.73

testing and commissioning of M.S. ERW Black C

Class Heavyduty pipes as per IS: 1239 (upto

mm dia.) and IS: 3589 (upto 200 mm dia. And

above) including cutting, screwing, welding etc. and

providing all fittings like flanges, bends, tees,

elbows, reducers, clamps, hangers etc. with painting

of one coat of primer and 2 or more coats of

synthetic enamel paint of approved make / shade

complete as per specification. 150mm dia.

[42] Providing, fixing, testing and commissioning of M.S. 96.00 MTR 1391.38

ERW Black C Class Heavyduty pipes as per IS:

(upto 150 mm dia.) and IS: 3589 (upto 200 mm dia.

And above) including cutting, screwing, welding etc.

and providing all fittings like flanges, bends, tees,

elbows, reducers, clamps, hangers etc. with painting

of one coat of primer and 2 or more coats of

synthetic enamel paint of approved make / shade

complete as per specification. 100mm dia.

[43] Providing, fixing, testing and commissioning of M.S. 126.00 MTR 984.73

ERW Black C Class Heavyduty pipes as per IS:

(upto 150 mm dia.) and IS: 3589 (upto 200 mm dia.

And above) including cutting, screwing, welding etc.

and providing all fittings like flanges, bends, tees,

elbows, reducers, clamps, hangers etc. with painting

of one coat of primer and 2 or more coats of

synthetic enamel paint of approved make / shade

complete as per specification. 80mm dia.

[44] Providing, fixing, testing and commissioning of M.S. 88.00 MTR 772.71

ERW Black C Class Heavyduty pipes as per IS:

(upto 150 mm dia.) and IS: 3589 (upto 200 mm dia.

And above) including cutting, screwing, welding etc.

and providing all fittings like flanges, bends, tees,

elbows, reducers, clamps, hangers etc. with painting

of one coat of primer and 2 or more coats of

synthetic enamel paint of approved make / shade

complete as per specification. 65mm dia.

Description of Item

Item Rate In

(with brief specification and reference to book Quantity Unit Amount

No. Figure

of specifications)

[45] Providing, fixing, testing and commissioning of M.S. 204.00 MTR 613.70

ERW Black C Class Heavyduty pipes as per IS:

(upto 150 mm dia.) and IS: 3589 (upto 200 mm dia.

And above) including cutting, screwing, welding etc.

and providing all fittings like flanges, bends, tees,

elbows, reducers, clamps, hangers etc. with painting

of one coat of primer and 2 or more coats of

synthetic enamel paint of approved make / shade

complete as per specification. 50mm dia.

[46] Providing, fixing, testing and commissioning of M.S. 368.00 MTR 451.37

ERW Black C Class Heavyduty pipes as per IS:

(upto 150 mm dia.) and IS: 3589 (upto 200 mm dia.

And above) including cutting, screwing, welding etc.

and providing all fittings like flanges, bends, tees,

elbows, reducers, clamps, hangers etc. with painting

of one coat of primer and 2 or more coats of

synthetic enamel paint of approved make / shade

complete as per specification. 40mm dia.

[47] Providing, fixing, testing and commissioning of M.S. 996.00 MTR 297.32

ERW Black C Class Heavyduty pipes as per IS:

(upto 150 mm dia.) and IS: 3589 (upto 200 mm dia.

And above) including cutting, screwing, welding etc.

and providing all fittings like flanges, bends, tees,

elbows, reducers, clamps, hangers etc. with painting

of one coat of primer and 2 or more coats of

synthetic enamel paint of approved make / shade

complete as per specification. 25mm dia.

[48] Supplying, Installation, Testing and commissioning 7.00 Nos 5052.02

of C.I. Butterfly valve conforming to I.S: 13095 class

PN 16 rating with Fittings, Flanges, Nutbolts,

Washers, Gaskets etc. of size: 150mm dia

(ForAutomatic Fire Sprinkler System)

[49] Supplying, Installation, Testing and commissioning 8.00 Nos 3726.90

of C.I. Butterfly valve conforming to I.S: 13095 class

PN 16 rating with Fittings, Flanges, Nutbolts,

Washers, Gaskets etc. of size: 100mm dia

(ForAutomatic Fire Sprinkler System)

[50] Supplying, Installation, Testing and commissioning 4.00 NOS 3105.75

of C.I. Butterfly valve conforming to I.S: 13095 class

PN 16 rating with Fittings, Flanges, Nutbolts,

Washers, Gaskets etc. of size: 80mm dia

(ForAutomatic Fire Sprinkler System)

[51] Supplying, Installation, Testing and commissioning 12.00 NOS 2650.24

of C.I. Butterfly valve conforming to I.S: 13095 class

PN 16 rating with Fittings, Flanges, Nutbolts,

Washers, Gaskets etc. of size: 50mm dia

(ForAutomatic Fire Sprinkler System)

Description of Item

Item Rate In

(with brief specification and reference to book Quantity Unit Amount

No. Figure

of specifications)

[52] Providing and fixing, testing and commissioning of 488.00 NOS 393.40

K 5.6 Pendent type Standard Response Sprinkler

rating of 68deg.C. with required accessories.UL

[53] SS Sprinkler rossette plate. 488.00 Nos 82.82

[54] Supplying, Installation, Testing and commissioning 488.00 Nos 993.84

of SS Flexible drops 1200/ 1500mm Long.

Unbraided, Maximumm Service pressure 175PSI,

.Sprinkler Flexible Drop system is a ready to use

assembly to fit sprinkler heads in desired location in

a suspended ceiling. It easily positions the sprinkler

in center of the ceiling tile at a correct height

[55] Supplying, Installation, Testing and commissioning 12.00 Nos 4555.10

of Flow Switch on sprinkler distribution header on

each floor with necessary Junction Box and shall be

connected to fire alarm panel through cable. Flow

switch shall be "UL" Listed size 150mm dia/

100mm dia/ 80mm dia. (Flow switch cabling to

monitor module to FACP in ELV Contractor Scope)

[56] Supplying, Installation, Testing and commissioning 12.00 NO 7039.70

of Inspector test assembly complete with test valve,

sight glass sectional drain valve, union; necessary

piping, threading, jointing & with corrosion

resistant orifice all complete strictly as per

drawing.25mm dia.

[57] On - Off Pump Trigger System. Providing, fixing, 15.00 NO 414.10

testing and commissioning of On -Off Switch.

[58] Providing, fixing, testing and commissioning of 3 150.00 MTR 82.82

Core X 1.5 Sqmm flexible Cable with PVC Condiut.

[59] Providing, fixing, testing and commissioning of 20.00 NO 165.64

below Auto Glow Signages. Emergency Exit 4” X 12”

[60] Providing, fixing, testing and commissioning of 60.00 NO 331.28

below Auto Glow Signages. Fire Fighting

Equipements .8” X 12”

[61] Providing, fixing, testing and commissioning of 90.00 NO 165.64

below Auto Glow Signages. Fire Extinguisher 4” X

[62] Providing, fixing, testing and commissioning of 20.00 NO 331.28

below Auto Glow Signages. In Case of Fire do not

use Lift, Use Staircase 8"x 8"

[63] Providing and fixing of convention Below Ceiling 120.00 NO 3147.16

smoke detector complete with mounting base as

Description of Item

Item Rate In

(with brief specification and reference to book Quantity Unit Amount

No. Figure

of specifications)

[64] Providing and fixing of conventional manual call 12.00 NO 3726.90

[65] Providing and fixing of conventional horn cum 12.00 NO 3726.90

[66] SITC Of Addressable Fire Alarm Panel 1.00 NO 103525.00

[67] Providing and fixing of 2x1.5 sqmm fire alarm 2000.00 RMT 99.38

armoured cable, 600/1000V rated with annealed

copper conductor having XLPE insulation, steel wire

armouring &FRLS outer sheath complete as

[68] APPROVAL FIRE SYSTEM FROM LOCAL FIRE 1.00 Job 207050.00

AUTHORITY Getting of Fire Fighting System

Approval from local fire authority with all other

charges and documentations for getting No

Objection Certificate.

Total Rs.

I/We am/are willing to carry out the work at…......................% above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned

in all the tender.

5. Credit of Dismantal Material amount of Rs. must be recovered from Contractor's R.A Bill.

6. Payment will be given only if the material testing result is satisfactory.Testing of material shall be

done as per statement attached with specification

Dated Signature Deputy Executive Engineer Executive Engineer

the Contractor. R & B Sub Division Kheda R & B Division

Nadiad Nadiad