NAME OF WORK: CONSTG INTERNAL C.C ROAD IN MAIN YARD , BALASINOR OF AP.M.C BALASINOR DI: MAHISAGAR

NAME OF WORK: CONSTG INTERNAL C.C ROAD IN MAIN YARD , BALASINOR OF AP.M.C BALASINOR DI:

Taluka :Virpur Dist: Mahisagr

Sr.No. Quantity Item Description Total Rate PER Amount

Box cutting the road surface to proper slop and

camber for making a base of road work including

removing the excavated stuff and depositing on the

1 4115.00 road side slop as directed up to 50 mts. Lead. 69.4678 Cu.Mt.

Providing laying and spreading granular machine

crushed BT aggregate material in required

proportion so as to have mix material gradation

equivalent to GSB grade II, mixing in place with

rotavator and grading with mortar grader at OMC

and compacted with vibratory roller 80 to 100 KN

static weight to achive desired density etc.

2 823.00 complete. 747.4 Cu.Mt.

Providing and laying compacted WBM of Grading-II

MCBT metal of size 45 to 63mm in required layers

including using 13% stone screening, 13.2mm size

and 7% stone dust as filler including spreading

watering & consolidation by vibratory roller etc.

3 324.00 complete. 1066.883 Cu.Mt.

Construction of dry lean cement concrete Sub- base

over a prepared sub-grade with coarse and fine

aggregate conforming to IS:383, the size of coarse

aggregate not exceeding 25mm, aggregate cement

ratio not exceed 15:1, aggregate gradation after

blending to be as per table 600-1, cement content

not to be less than 220 kg/cum, optimum moisture

content to be determined during trial length

construction, concrete strength not to be less than

10 Mpa at 7 day, mixed in a batching plant,

transported to site, land with a fixed form paver or

conventional method, compacting with 80-100 KN

static weight vibratory roller, finishing and curing

4 162.00 etc. complete. 2224.02 Cu.Mt.

Construction of un-reinforced, dowel jointed, plain

cement concrete pavement over a prepared sub

base with concrete grade M30, coarse and fine

aggregate conforming to IS:383, maximum size of

coarse aggregate not exceeding 25mm, mixed in

batching and mixing plant as per approved mix

design, transported to sitr, laid with a fixed form or

slip form paver, spread, compacted and finished in a

continuous opration including provision of

contraction, expansion, construction and

longitudinal joints, joint filler, separation

membrane, sealant primer, joint sealant, dobonding

strip, down bar, tie road, admixture as approved

curing compound, sinishing to lines and grades as

5 1214.00 per drawing. 4796.49 Cu.Mt.

Providing and fixing pre-cast Rubber Dye inter

locking concrete block 60 mm thick with grade of

concrete M200 pnmatic compressed by

mechanically pressed and as per approved design.

including 75 mm sand layer for levelling and filling

the joint with sand in proper line and level etc

6 2373.00 complete. 740.5118 Sq.Mt.

Providing ISI Mark TMT bar Fe-415 reinforcement

for RCC work including bending, binding and place

drawinngs for solid slab, abutment cap, dirt wall &

pier cap & also for the (For temperature

reinforcement of abutment, return & pier) (more

Providing and casting in situ ordinary cement

concrete M-200 for kerbs/kerb blocks including

required excavation, from work curring and finishing

8 107.00 complete. 3760.23 Cu.Mt.

Earth work for embankment including breaking

clods, dressing with all lead and lift (Including

watering and consolidation) (C) from borrow area

9 106.79 with all lead and lift. 178.366 Cu.Mt.