Development of Temple Souvenir Shop by Converting Temple Store along Langar buiding into Temple Souvnir Shop for Temple Trust Shri Naina Devi ji,Distt.- Bilaspur (H.P.)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge and carriage of material upto lead 1 km head load.and mechanical transport upto dumping site complete in all respect within all metres lead and lifts as per direction and best satisfaction of Engineer-in-charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material complete in all respect within all metres lead and lifts as per direction and best satisfaction of Engineer-in-charge. (a) In cement mortar.

15 mm cement plaster on rough side of single or half brick wall of mix complete in all respect within all metres lead and lifts as per direction and best satisfaction of Engineer-in-charge. (a) 1:6 ( 1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in complete in all respect within all metres lead and lifts as per direction and best satisfaction of Engineer-in-charge. (a) In cement mortar 1:6.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete in all respect within all metres lead and lifts as per direction and best satisfaction of Engineer-in-charge. (a) Size of Tile 800x1600 mm

Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as perASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick onSilhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate crossT of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per With 15 mm thick integral densified microedge light weight calcium silicate false ceiling tiles complete in all respect within all metres lead and lifts as per direction and best satisfaction of Engineer-in-charge.

Providing and fixing skirting and ceiling with Pre-laminated medium density fibre board exterior grade (Grade-I) conforming to IS: 14587:1998 marked, with (one side decorative and other side balancing lamination and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. complete in all respect within all metres lead and lifts as per direction and best satisfaction of Engineer-in-charge. ( a) 18 mm thick PVC sheet

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, for fixing required door fittings, all complete as per direction of Engineer-in- charge (Door handle, lock and stopper etc.to be paid separately) complete in all respect within all metres lead and lifts as per direction and best satisfaction of Engineer-in-charge.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454- part 1 and M.S. top cover of required thickness for rolling shutters complete in all respect within all metres lead and lifts as per direction and best satisfaction of Engineer-in-charge. (a) steel work in single section, fixed with or 80 x1.25 mm M top cover.

Providing and fixing ball bearing for rolling shutters complete in all respect within all metres lead and lifts as per direction and best satisfaction of Engineer-in-charge.