SPL REPAIR OF MD ACCN BLDG NO P-196, P-136, P-139, P-140 AND P-149 AT CERTAIN UNIT OF MISA CAMP UNDER GE (S) TEZPUR

Amount

Taking down cement plaster on brick/concrete surfaces of walls and ceiling including racking out jointing hacking for key, scrubbing down with water etc.

Taking down chowkhats incl shutterrs (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4 sqm each complete all as specified & directed.

Taking down chowkhats incl shutterrs (without taking off shutters from the frame) n exc 1.5 sqm complete all as specified & directed.

Dismantling water tanks of capacity exc 500 l & not exc 1000 litres and removing to store complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.

Demolition of Cement Concrete of any description and in any position complete all as specified & directed.

Demolition of RCC of any description complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description complete all as specified & directed.

S&F 750 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.

S&F 1000 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed of size 25mm bore complete all as specified & directed.

S & F in repairs 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete as specified and directed

M&L for RCC (1:2:4) type B-1(using 20 mm grade4d stone aggregate) as in precast slab set in CM (1:4). and fixed complete as specified and directed

M&L for R C C 1:2:4 type B-1 (using 20mm gradded stone aggegate) as in roof slab supported on wall, beam , landing ,deck slab etc.complete as specified and directed

Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified & directed.

S&F 10mm dia and over deformed TMT bars as in reinforcement,cut to length bent to shape etc as required incl binding with MS wire annealed not less than 0.90m dia. complete all as specified & directed.

S&F including Taking up or down existing 15mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified & directed.

S&F including Taking up or down existing 20mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified & directed.

S&F including Taking up or down existing 25mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified & directed.

S&F including Taking up or down existing 32mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified & directed.

S & F Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

S & F Pressed steel frames of size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified & directed.

S & F 25 x 3mm Flat Iron hold fast conforming to Fe 410-0 complete all as specified & directed.

M&l for PCC 1:3:6 type C1(ysing 20mm graded stone aggregate) as in padding, hold fasts/filling of chowkhats or similar work as directed. complete all as specified & directed.

S & F 35 mm thick flush factory made shutter , solid core construction ,with block board core and plywood face panel ,commercial type on both side. complete all as specified & directed.

S&F 35mm thick factory made glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. Divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters as specified in SSR Part I, section 8, clause 8.23(a) complete all as specified & directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified & directed.

S & F powder coated Anodised aluminium frame for doors, three track windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F powder coated aluminium door, window and ventilator shutters, aluminium section weighing 0.55 Kg/Sqm incl necessary jointing cleats, glazing clips, rubber neophrene packing, handles 02 Nos in each Shutters, hinges, aluminium snap beadings, screws,etc, complete all as specified and directed.

Materials and Labour for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Hacking Out Old Broken Glass (any thickness, size, quality or description) from Wooden Frames, Glazed with Putty or fixed with Beads, complete all as specified and as directed.

S&F in repair 4mm thick ordinary quality sheet glass in squares exc 0.5 sqm in each pane fixed in aluminium frame complete all as specified & directed.

S&F 4mm thick ordinary quality sheet glass in squares exc 0.5 sqm in each pane fixed in aluminium frame complete all as specified & directed.

S&F Galvanized stainless steel wire cloth 0..36 mm nominal dia of wire and average width of aperature 1.40 mm fitted with tinned tacles or galvanised wire staples complete all as specified and as directed.

S&F in repairs Galvanized stainless steel wire cloth 0..36 mm nominal dia of wire and average width of aperature 1.40 mm fitted with tinned tacles or galvanised wire staples complete all as specified and as directed.

S/F 100mm size extruded aluminum alloy handles, fabricated type, anodized.

S&F 150mm long aluminium handle, cast type, anodised

S&F 100mm long aluminum anodized barred tower bolts of extruded section.

S&F 100mm size MS butt hinges, medium weight, cold rolled.

S&F 125 mm stainless steel Butt hinges medium weight cold rolled mild steel and fixed.

S&F 125 mm aluminium anodised barrel tower bolt, of extruded section and fixed in position

S&F 300mm long M.S sliding door bolt, bolt type stove enameled black with bright bolt not less than 12mm dia and including a minimum of six bolts and nuts four on bolt plate & two on staple plate.

S & F Mortice lock of brass of four levers ,vertical type, size 100 mm, complete all as specified and as directed

S & F Floor door stopper 14cm long of aluminium alloy body and tongue, anodised,with hard drawn steel spring, complete all as specified and as directed

S & F in repair 300mm, MS ordinary rat tail rod pattern door springs including roller and roller plate complete all as specified and as directed

M&L for 2 coats of synthetic enamelled paint over coat of pink primer on wooden surfaces oves 10cm width or girth including preparation of new surface.

M&L for 2 coats of synthetic enamelled paint over coat of pink primer on wooden surfaces oves 10cm width or girth including preparation of old surface.

S&F Factory Made Solid PVC moulded Door Shutter (with wood free EPS) 28 to 30mm thick (style) with 2,4, or 6 raised panel design with 2mm thick moulded prelam sheet on the front face and 2mm prelam PVC sheet on back face Complete as per direction of Engineer-in-charge, manufacturer's instruction and drawing.

S&F Solid PVC door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete

S&F PVC board /sheets for fabrication of kitchen cabinets of depth 700mm below kitchen platform to be made as per following specification - Main outer body/carcuss shall be made using 18mm thick Pre-laminated plain white solid PVC board of density not less than 550 kg/cum.on top, bottom, LHS & RHS. Backside of main body shall be fixed with 5mm thick PVC plain white sheet. 1x shelves shall be provided using 18mm thick plain white solid PVC board of density not less than 550 kg/cum. 18mm thick prelaminated PVC sheet with decorative finish on one face and other face white having density not less than 600 kg/cum shall be used for shutters on front including fixing using stainless steel auto hinges of best quality, partition, PVC beading on edge and lining and lining as required. Backside of main body shall be fixed with 5mm thick PVC plain white sheet. Note: - Only front face to be measured for payment purpose.

S&F PVC board /sheets for fabrication of kitchen cabinets of depth 300mm for Overhang Kitchen Cabinet to be made as per following specification Main outer body/carcuss shall be made using 18mm thick prelaminated plain white solid PVC board of denisity not less than 550 Kg/Cum on top , bottom, LHS & RHS, backside of main body shall be fixed with sheet, 1xshalves shall be provided using 18 mm thick white solid PVC board of density not less than 550 Kg/ Cum Backside of main body shall be fixed with 5mm thick PVC plain white sheet. Note: - Only front face to be measured for payment purpose.

M&L for 10mm thick rendering in cm (1:6) on other than fair faces of brick work finished even & smooth without using extra cement.

M&L for 15mm thick rendering in cm (1:4) on fair faces of brick work with using WPC @ 3% finished even & fair.

M&L for 5mm thick rendering in cm (1:3) on ceiling finished even of smooth without using extra concrete.

M&L for 15mm thick plastering in cement mortar 1 :3 with integral water proofing compound @ 3% by wt of cement finished even & smooth over RCC roof/slab/Chajja/Sun shade etc with out using extra cement. (water proofing compound measured & paid separately) in single storie , double storie bldg including necessary scaffolding etc including taking down existing plaster

M&L for providing, cement concrete type B0, 1:2:4 (using 12.5mm graded aggt) in haunching of chajjas, roof kerbs or mud stops, rounded or chamfered on edges complete all as directed

M&L for applying two coats of distemper over a coat of primer over a coat of 3mm thick a layer of wall care putty on walls.

M&L for two coats of oil bound distemper over a coat of primer over 3mm thick layer of wall care putty after complete removal of existing treatment

M&L for three coats of white wash to internal wall including preparation of new surfaces.

M&L for one coat of white wash over old decorative surface internal wall including preparation of new surfaces.

M&Lfor three coats of white washing to ceiling including preparation of new surfaces.

All as per item No 62 above but one coat over old decorative surface –ditto-

M & L for two coats of exterior emulsion antifungus paint over a coat of primer over a coat of 3 mm thick wall care putty to wall including complete including preparation of surface as specified and directed

M & L for two coats of exterior emulsion antifungus paint over a coat of primer over a coat of 3mm thick wall care putty to wall including complete including preparation after complete removal of existing treatment as specified and directed

Supply only integral water proofing compound

M&L for 25 mm thick P.C.C (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in floor finished rough.

M & L for Screed Bed or Bedding Layer 15mm thick in Cement Mortar 1:4 for laying Floor Finishes/Tiles, complete all as specified and as directed

M & L for Rendering or Backing Layer 10mm thick in Cement Mortar 1:3 on Walls, etc. for fixing Tiles as Skirtings, Dados,risers etc, complete all as specified and directed.

M & L for pre-polished machine cut kota stone on flooring/staircase 18-20 mm thick over cement screed bed laid and jointed with grey cement slurry mixed and with pigment to match the shade of slab including rubbing/grinding and polishing complete all as specified and directed.

-ditto- all as item No.70 above but on vertical surface such as skirting, risers etc complete all as specified and directed.

S&F non skid ceramic tiles 10 mm thick (Square/rectangular) area of each tile 600mmx600 mm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and directed.

S&F non skid ceramic tiles 10 mm thick (Square/rectangular) area of each tile 600mmx600 mm, in vertical surface etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and directed.

M & L for Virified Ceramic tiles of dark shade 10 mm thick (square/ rectangular) polished, area of each tiles of size 600x600mm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as item No.74 above, but in vertical walls/skirting complete all as specified and directed.

S&F non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tileexceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and directed.

M & L for glazed ceramic wall tiles of size 450 x300 x 7 to 8mm thick set jointed in neat cement slurry and pointed with white cement to match the tiles complete in skirting/dado. complete all as specified and directed.

M&L for Granite (of any type) 16-18 mm thick work (table rnbbed and polished) in steps, janlbsl pillars; window-eills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed.

M & L for Granite (of any type) 16-18 mm thick work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1 :3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed.

S&F in repairs 20 mm dia decorative curtain rods of MS conduit with bright finish,including decorative side domes, brackets and a minimum of 8 Nos curtain rings in per RM of length complete all as directed by Engineer In Charge.

Demolition & bracking up 75/100mm bore AC/CI/PVC pipe set in cement mortor.

S&F 110mm bore P.V.C (S.W.R) pipe, single socketed in any length with rubber ring joints fixed to walls.

S&F 75 mm bore P.V.C (S.W.R) pipe, single socketed in any length with rubber ring joints fixed to walls.

S&F 110mm bore P.V.C (S.W.R) bend

S&F 110mm bore P.V.C (S.W.R)T junction equal or unequal.

S&F 110mm bore P.V.C vent cowl

S&F 110mm bore PVC (SWR) branch piece, single `Y’ equal or un equal.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms)

S&F in repairs vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including lime concrete bedding 1:2 complete all as specified & directed.

S&F in repairs padestal type bowl and cistern for couple closet (One piece) complete all as specified & directed.

S&F in repairs 10 lits capacity PVC low level flushing cistern including pull chain & flush pipe, connection pipe etc complete all as specified & directed.

S&F in repairs 40 mm bore P.V.C pipe including bends and unions as and when required in any length with rubber ring joints fixed in position, as directed .

Supply and fix as in repair, PVC cabinet looking mirror with inner shelves for holding bath/saving kit of size 300x450mm complete all as specified and directed

S & F in repair health faucet with 1.00 mtr tube and hook complete all as specified and directed.

S&F 15 mm bore fancy type chromium plated Two way bib tap with crutch or buttrfly handle screwed down for iron pipe. complete all as specified and directed

S & F in repairs 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

S&F in repair 15mm bore Long body fancy type chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes. complete all as specified and directed

S&F 15 mm bore stop valve fancy type chromium plated with long shank and cup (concealed type) alloy, screwed down, high pressure, with cruth or butterfly handle, screwed both ends for iron pipe or for unions. complete all as specified and directed

S & F 15mm Angle Stop valves cast copper alloy,fancy type with chromium plated for iron pipe or for unions and fixed . complete all as specified and directed

S&F in repair 15mm bore 125/150/200mm size type brass chromium plated shower rose, complete all as specified.

S & F in repair CP Soap dish of size 160x 160x90mm, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed

S & F in repair CP Towel Rack 600mm long fixed with and including Chromium plated brass screws and wooden/plastic cleats. complete all as specified and directed

S & F in repair CP Towel Ring fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed

S&F in repair 15mm dia Basin Mixer cast copper alloy, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks complete all as specified and as directed.

S&F in repairs pillar taps fancy type with capstan heads, chromium plated, srewed down high pressure, with or without lettered `Hot' or `Cold' with long srewed shanks and fly-nuts, screwed for iron pipe and fixed in 15 mm bore complete all as specified and as directed.

S&F in repair wall mixer , 3 in -1 system with provision for both telephone shower and over head shower, chromium plated, fancy type, 15 mm bore complete all as specified and directed .

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x160mm complete all as specified and as directed.

S & F in repairs vitreous china wash hand basin flat back of size 550 x 400 mm including brackets CP waste coupling 32 mm and PVC waste pipe and 15mm PVC connection complete all as specified and directed

M & L for mass concrete filling using PCC ( 1:5:10) type E2(using 40 mm graded stone aggregate) as in sunken floor using WPC @ 3% of cement used(Note: WPC Shall be paid separately) complete all as specified and directed

M & L for average 25 mm thick cement concrete 1:2:4 type B-1 using 20 mm graded aggregate with integral wpc complies with in sunken floor and bathroom area (Note: WPC shall be paid seprately)

S&F APP base polymeric membrane minimum weighing 3.6kg/sqm and 3mm thick reinforced with polyester non-wove fabric (wt not less than 150gms/sqm) laid on bitumen 85/25 grade primer surface by forced application complete all as specified. Note: - The work shall be carried through authorized applicator of manufacturer and statically as per the manufacturer instructions. The defect liability period of water proofing treatment to RCC roof slab including sunken floor etc shall be 10 years and the contractor shall be responsible to keep the entire building(s) free from leakage/seepage for a period of 10 years after certified date of completion. The contractor shall be obtained a written guarantee certificate from the specialist firm engaged by him for the purpose and submit to the Engineer in Charge.

Demolition and breaking up drain pipes 150 mm dia unserviceable salt glazed stone ware drain pipes set in cement mortar all as specified and directed.

M & L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate concrete in bed to drain pipe including packing under and haunching against the sides pipes 150 mm internal dia after they are laid joined and tested complete

M & L for salt glazed stone ware drain pipes grade A 150mm dia laid in trenches and jointed as specified.

Material and labour for Cleaning and preparation of roof/wall (RCC/BRICK/Miles/Cement concrete) surface and made free of dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expansion/ contraction and repairing the cracks on the surface caused by thermal machine filled with Repair Mortar/General purpose Grout in the proportions as recommended by manufacturer supplying and applying High performance Hybrid Polyurea waterproofing coating spray/hand applied liquid membrane with following specifications (a) Elongation of range 400% 600% (b) Tensile strength of 8-12 N/mm2. (c) Crack bridging ability of 3,00-4.00mm (d) Hardness (Shore A ASTM D2240) of range 50-70 The application shall include final base preparation epoxy primer application in rato 1.1 (resin: hardner) with 100% water dilution and application of Hybrid polyurea in two coats in d hrs interval to achieve total min thickness 1 to 1.50mm. Note: - The work shall be carried through authorized applicator of manufacturer and statically as per the manufacturer instructions. The defect liability period of water proofing treatment to RCC roof slab including sunken floor etc shall be 10 years and the contractor shall be responsible to keep the entire building(s) free from leakage/seepage for a period of 10 years after certified date of completion. The contractor shall be obtained a written guarantee certificate from the specialist firm engaged by him for the purpose and submit to the Engineer in Charge.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete. Note The stucture shall be prepared as per the design approved by the GE

M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with L type J type or cranked hook bolts as specified and directed

M&L for preparation old painted surfaces of steel and iron surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M&L for preparation new surfaces of steel and iron surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed

Supply and fix in repair Plate rack made out of Stainless steel sheet 0.5 thick overall size 650(H)x650(W)x250(D) including brackets or fitted with existing shelves in repair complete all as specified and directed

Demolition of brick work built in cement mortar including all quions, arches pillars etc. all as specified and directed.

M & L for Brick work built in CM 1:4 with sub class "B"old size bricks straight or curved on plan exceeding 6 m mean radius.

M&L for brick work using sub class ‘B’ bricks (old size) straight or curved on plan to any radius in half brick work built in CM 1:4 complete all as specified.

M &L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in drain/surface channel and similar work .

M&L for 15 mm thick plastering on other than fair faces of wall surfaces in cm (1:4) finished even and smooth without using extra cement complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete with fair finished with using extra cement.complete all as specified and directed

M&L for 75mm thick P.C.C 1:4:8 type D-2 using 40mm graded stone aggregate finished even and smooth without using extra cementas in plinth protection / sub base/ etc complete all as specified and directed.

M&L for hard core of gauge n'exc 63 mm of broken boulder below Path.complete all as specified and directed

Forming Constrution (Dummy) joints 30 mm deep x 10 mm wide, filled with sealing compound grade A complete all as specified and directed

M&L for Prepolished Coloured Cement Concrete designers Chequered Tiles 300 x 300x 25 mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles complete including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches,ceiling roses,pendants,regulators,sockets,light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.

Material and labour point wiring for one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, suitable for modular cover plate with frame of suitable size and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Rate deemed to be inclusive of cutting chases and making good disturbed surface).

All as per item No.133 above but One 3 pin 5 Amps socket out let points on independent board

All as per item No.133 above but 5 Amp socket on same board with other switches.

All as per item No.133 above but one light point controlled by 2 Nos. 2 way switches.

M & L for point wiring for socket out let on 16 Amps independent Boards controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, suitable for modular cover plate with frame of suitable size and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Rate deemed to be inclusive of cutting chases and making good disturbed surface).

M & L for point wiring for socket out let on 16 Amps independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, suitable for modular cover plate with frame of suitable size and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Rate deemed to be inclusive of cutting chases and making good disturbed surface).

Supply and fixing Modular switch one way 6 Amp complete all as specified and directed..

Supply and fix modular switch 2 way 10 Amp complete all as specified and directed..

Supply and fix modular bell push 10 Amp complete all as specified and directed..

Supply and fix Ding Dong bell, AC, 230 volts, single pole complete all as specified and directed..

Supply and fix modular socket outlet 2 in 1, 3 pin 10 A complete all as specified and directed.

Supply and fix modular socket outlet 2 in 1, 3 pin 16 Amps complete all as specified and directed.

Supply and fix Modular switch one way 16 Amp complete all as specified and directed.

Material and labour for ceiling rose polycarbonate isolated body 3 ways terminals complete all as specified and directed.

Supply and fix modular type electronic fan regulator complete all as specified and directed.

Supply & fixing lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified.

Supply and fixing modular white cover plate with frame 2 modules complete all as specified and as directed.

Supply and fixing modular white cover plate with frame 3 modules complete all as specified and as directed.

Supply and fixing modular white cover plate with frame 4 modules complete all as specified and as directed.

Supply and fixing modular white cover plate with frame 6 modules complete all as specified and as directed.

Supply and fixing modular white cover plate with frame 8 modules complete all as specified and as directed.

Supply and fixing modular metal flush box 2 modules complete all as specified and as directed.

Supply and fixing modular metal flush box 3 modules complete all as specified and as directed.

Supply and fixing modular metal flush box 4 modules complete all as specified and as directed.

Supply and fixing modular metal flush box 6 modules complete all as specified and as directed.

Supply and fixing modular metal flush box 8 modules complete all as specified and as directed.

Supply & fixing in repair for Modular type 25 Amps power unit combine with on/off switch complete all as specified and directed.

Supplying and fixing in repair sub main wiring two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked), concealed, including 4 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified. (Rate deemed to be inclusive of cutting chases and making good disturbed surface). Note : Two run of 4 sqmm wire with one run of 4 sqmm and one run of conduit pipe shall be measured against one unit.

Supplying and fixing in repair sub main wiring two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC conduit (ISI marked) concealed including 6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified. MAKE: KEI/ Polycab/RR Cables & equivalents. (Rate deemed to be inclusive of cutting chases and making good disturbed surface). Note : Two run of 6 sqmm wire with one run of 6 sqmm and one run of conduit pipe shall be measured against one unit.

Supplying and fixing in repair four single core ,6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC conduit (ISI marked) concealed including 6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified. MAKE: KEI/ Polycab/RR Cables & equivalents. (Rate deemed to be inclusive of cutting chases and making good disturbed surface). Note : Four run of 6 sqmm wire with one run of 6 sqmm and one run of conduit pipe shall be measured against one unit.

Supply and fixing18 W LED light fitting wall mounted batten 4'ft, minimumm lumen output 100 lumen/Wat, extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6500K including necessary connection complete all as specified and directed.

Supply and fixing10 W LED light fitting wall mounted batten 2'ft, minimumm lumen output 100 lumen/Wat, extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 09 watt,6500K including necessary connection complete all as specified and directed.

Supply and fixing security light fittings 30 watts, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete including 25mm dia light grade GI bracket with nut bolt and clamp complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed.

Supply and fixing 12 W Surface panel mounted round LED downlight, aesthetically designed aluminium die-cast enclousers, with seperate replaceable constant current driver 12 watts, including necessary connection complete all as specified and directed.

Supply & fixing of LED bulb 15 watt 6500 k complete all as specified and as directed.

Supply and fixing LED decorative wall light made up of high grade engineering plastic material suitable for LED 20W complete as per manufacturer's instructions all as specified and directed.

Supply and fixed in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

Supply and fixed in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 12 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

Supply and fixed in repairs epoxy powder coated sheet metal enclosure for DBs, double door, Triple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

Supply and fixed in repairs MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessry connection complete all as specified and directed.

Supply and fixed in repairs MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed.

Supply and fixed in repairs MCB TPN 63 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessry connection all as specified and directed.

Taking down of AC ceiling / exhaust fan of any sweep & any height and opening the fan and oiling, greasing and replacement of unserviceable accessories and servicing, complete overhauling and re-assembling and testing complete for efficient functioning and hanging it back in position including provn of 0.5 Sqmm copper flexible twin twisted cable (length not exceeding 0.5 metre) from ceiling rose to fan as directed by the Engr-in-Charge.

Taking down existing Geyser of any size and make upto 25 ltrs carefully, by diconnecting electrical and water pipe line connection and deposite at MES Yard/store for refixing.

Refixing of existing Geyser 25 ltrs as per above item by connecting electrical and water pipe line connection.

Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.

NOTES:1. All perodical work shall be executed by mechniacl means as specified in particular specictions 2. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 3. The rates for RCC/PCC shall deemed to include the cost of formwork, shuttering etc., required for complete and proper execution of the item.

M/s DEBOJIT ROY (BID ID -3343536)

K K Construction Co (BID ID -3342576)

M/S MOHANPASARI (BID ID -3343937)

D G Corporation (BID ID -3337544)

M.P.SUPPLY (BID ID -3341346)

SUNIL KUMAR VERMA (BID ID -3342641)

M/S R G Construction (BID ID -3343759)

M/S SITAL BUILDERS (BID ID -3344402)

M/s t.t.enterprises (BID ID -3342487)