Loading
Loading…
Loading…
Tender Value
₹1.3 Cr
EMD Value
₹2.6 L
Closing Date
16 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
MAINTENANC
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V = Advertised value of the tender in crores of Rupees N = Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer shall possess a valid Electrical Contractor License, issued by any State Government or Union Territory Administration, authorizing execution of electrical works up to 650 V. The contractor shall have in his employment or shall engage a person holding a valid certificate of competency issued by any State Government or Union Territory Administration for supervision of electrical works up to 650 V.Offers not accompanied by a valid Electrical Contractor License and requisite Supervisor competency for works up to 650 V shall be summarily rejected.
Similar Nature of Work: Supply, installation, testing and commissioning of LT/HT electrical GS assets ORSupply, installation, testing and commissioning of electrification or rewiring of building/workshop. ORSupply, installation, testing and commissioning of Yard/circulating area/street lighting/tunnel/facade lighting. ORSupply, installation, testing and commissioning of high-mast lighting. ORSupply, installation, testing and commissioning of glow signages. ORSupply, installation, testing and commissioning of LT/HT electrical GS sub-station with at least 50% capacity of proposed sub-station ORRepair/overhauling of LT/HT electrical GS assets including LT/HT sub-stations.
49 conditions · 8 needing a document upload
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) /Limited Liability Partnership (LLP) etc., and corresponding documents shall be submitted by the tenderer as per the composition of the Firm.
The Bid Security shall be deposited either in cash through e payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA of GCC and shall be valid for a period of 90 days beyond thebid validity period. Non-submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non- submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids.
Eligibility criteria: Eligibility criteria shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
Tender Form (First sheet, Second sheet) of The GCC April 2022.
Certificate format (Affidavit) which available as Annexure - V in Mandatory documents. A facility has already created for online submission of Annexure V of GCC in IREPS module; uploading of physically signed Annexure V by tenderer has been discontinued
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) /Limited Liability Partnership (LLP) etc.
The corresponding documents shall be submitted by the tenderer as per the composition of the Firm: Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) above. HUF: (i) A copy of a notarized affidavit on Stamp Paper declaring that he who is submitting the tender onbehalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above. Partnership Firm: (i) All documents as mentionedin para18 of the Tender Form (Second Sheet). Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company(backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above. LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders/contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were/are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para10 of the Tender Form (Second Sheet). Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents andcreate liability against the Society/Trust.(iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
The tenderer shall be required to submit the Bid Security with the tender for the due performance with the stipulation to keep the offer open till such date as per Clause No.5 of PART -1 of The GCC, April 2022.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Guntakal Division-Provision of lifts on the Foot Over Bridges of Pakala, Anantapur, Adoni, Mantralayam Road, Dharmavaram and Sri Kalahasti railway stations - Power supply arrangements.
GTL-EM-33-2026-27~SCOR
GTL-EM-33-2026-27
Open
Works - General
6 Months
Anantapur, Andhra Pradesh
₹0
₹2.6 L
25 Aug 2026
25 Aug 2026
2 Sept 2026
163 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,31,90,330.21 | ||
| — | Breakup | for details. | — | ||
| Supply, fixing, connecting and comissioning of 12 way SPN Distribution board 12 module of model no. 507612 with metal door of legrand make or equivalent with all connecting accessories complete. | — | — | — | 28,512 | |
| — | Breakup | for details. | — | ||
| Supply and fixing of SPN DB's, 8 way 8 module confirming to IEC:61439 or its latest amendments IP 43 with metal door model no.507611 of legrand make or it's equivalent. | — | — | — | 25,872 | |
| — | Breakup | for details. | — | ||
| Supply, fixing and comissioning of of 4 way 8+12 modules DB with IP 54, IK 09 of incommer of MCCB upto 100Amps and outgoing for 12 Module with busbar din and neutral link of Model No.507690 of Legrand with all necessary accessories complete. | — | — | — | 92,472 | |
| — | Breakup | for details. | — | ||
| Supply and installation of DPX3 160 thermal magnetic based release; Icu = 36K A; 100A 4 Pole MCCB conform to IEC 60947-2 with its latest amendment, of model no. 4200 95 of Legrand make or equivalent with extended ROM, spreader links (2 sets). | — | — | — | 64,750 | |
| — | Breakup | for details. | — | ||
| Supply and erection of 63A, C-curve 3P MCBs with 10KA breaking capacity with all necessary accessories complete. | — | — | — | 33,264 | |
| — | Breakup | for details. | — | ||
| Supply and erection of 32A, C-curve 3P MCBs with 10KA breaking capacity with all necessary accessories complete. | — | — | — | 28,440 | |
| — | Breakup | for details. | — | ||
| Supply and fixing of 40/50/63 A 4P MCB C Curve, 10 KA capacity with necessary connections and all accessores complete. | — | — | — | 33,288 | |
| — | Breakup | for details. | — | ||
| Supply and fixing of C curve DP MCBs of 32/25/20 A with all connected accessories as per IEC 60898-1 with its latest amendments. | — | — | — | 17,440 | |
| — | Breakup | for details. | — | ||
| Supply and Erection of B curve 6A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 with its latest amendments, with all connected accessories. | — | — | — | 4,600 | |
| — | Breakup | for details. | — | ||
| Supply and Erection of B curve 10A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 with its latest amendments, with all connected accessories. | — | — | — | 5,520 | |
| — | Breakup | for details. | — | ||
| Supply, Erection, Testing and Commissioning of RCCB 4P 63A 300mA Sensitivity conforming to o IS 12640 (Part 1) : 2024 with its latest amendments, with all necessary accessories complete as advised by the site supervisor. | — | — | — | 30,319.2 | |
| — | Breakup | for details. | — | ||
| Supply, fixing, testing and commissioning of RCBO 63A, Four pole, 30mA in accordance with IS 12640-2(2008) or latest with all necessary accessories complete as advised by the site supervisor. | — | — | — | 42,380.8 | |
| — | Breakup | for details. | — | ||
| Supply and fixing of 32 A Electromechanical 4P RCBO 30 mA sensitivity in accordance with IS 12640-2(2008) or latest with necessary connections and all accessores complete. | — | — | — | 30,786.7 | |
| — | Breakup | for details. | — | ||
| Supply and running of 32 mm dia, Ivory coloured PVC conduit of wall thickness not less than 2 mm with junction boxes, bends and all accessories etc. as required as per site requirement. Running of conduit, fixing with suitable clamps and nuts in groove/open /shelter. | — | — | — | 53,343 | |
| — | Breakup | for details. | — | ||
| Supply and Running of 25 mm dia, Ivory coloured PVC conduit ( ISI marked) of wall thickness not less than 2 mm along with junction boxes, bends and all accessories etc. as required as per site requirement. Running of conduit, fixing with suitable clamps and nuts in groove/open/shelter. | — | — | — | 1,28,896 | |
| — | Breakup | for details. | — | ||
| Cutting of groove in the wall, plastering of surface to the original for concealing of the conduit in the wall (Laying and fixing of conduit will be paid separately). | — | — | — | 35,700 | |
| — | Breakup | for details. | — | ||
| Supply, laying, connecting & commissioning of single core multi strand 1.5 sq.mm FRLS Cu. Conductor. | — | — | — | 21,750 | |
| — | Breakup | for details. | — | ||
| Provision of concealed wiring with two runs of 1.5 Sq.mm 1100 Volts and one run of flexible copper conductor 1.5 Sq.mm 1100 Volts FRLS PVC insulated wires ISI marked (Phase, neutral and earth)( upto 10 meters lenght) (Rate arrived, considering an average of 7 meters per point) in the PVC conduit pipe with 6A flush modular type switch including 2 way switches where ever required, ceiling rose, bulb holder and modular type plate cover to MS switch control box including all labour charges complete for light points, ceiling fans and exhaust fans points cat walk points and ioh service buidling points etc. accessories. | — | — | — | 66,537.9 | |
| — | Breakup | for details. | — | ||
| Supply and run of 2 nos, 2.5 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 1.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit Pipe conforming to IS 694 (2010) with latest amendements. | — | — | — | 2,02,980 | |
| — | Breakup | for details. | — | ||
| Supply and run of 2 nos, 4.0 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit pipe conforming to IS 694 (2010) with latest amendements. | — | — | — | 1,06,260 | |
| — | Breakup | for details. | — | ||
| Supply and run of 2 nos, 6.0 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit pipe conforming to IS 694 (2010) with latest amendements. | — | — | — | 45,237.5 | |
| — | Breakup | for details. | — | ||
| Supply and running of 3 core 2.5 Sqmm Copper flexible cable conforming to IS 694 (2010) with latest amendements. | — | — | — | 51,100 | |
| — | Breakup | for details. | — | ||
| Supply and fixing of ABS SILENT CEILING MOUNTED CASSTTE EXHAUST VENTILATION FAN of model no: APT15-27 300CMH 150MM 6" of ASTBERG make or its equivalent with including necessary plastering, masonry work and clamps nuts bolts etc. | — | — | — | 98,000 | |
| — | Breakup | for details. | — | ||
| Supply and Installation of 22G With G.I material which is fixed at plunems and starting of duct | — | — | — | 2,21,250 | |
| — | Breakup | for details. | — | ||
| Supply & erection of GI duct damper in the Ducting as per site requirement and site enginners instructions. | — | — | — | 31,850 | |
| — | Breakup | for details. | — | ||
| Supply and fixing of metal flush box-12 module of model no:JIM 12 008 of GM FOURFIVE make or its equivalent with 12 module cover plate (With support frame) of model no:PK SB 12 007 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 16,263 | |
| — | Breakup | for details. | — | ||
| Supply and Fixing of metal flush box-8 module of model no:JIM 08 005/6 of GM FOURFIVE make or its equivalent with 8 module cover plate (With support frame) of model no:PK SB 08 011 - CASABLANCA of GM make or equavalant make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 11,880 | |
| — | Breakup | for details. | — | ||
| Supply and fixing of metal flush box-4 module of model no:JIM 04 003 of GM FOURFIVE make or its equivalent with 4 module cover plate (With support frame) of model no:PK SB 04 004 - CASABLANCA of GM make or equavalant make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 6,021 | |
| — | Breakup | for details. | — | ||
| Groove Cutting for Modular SwitchBoards (Each=1Module) | — | — | — | 8,036.14 | |
| — | Breakup | for details. | — | ||
| Supply and Fixing of Surface mounting plastic gang box-8 module of model no:JS 08 006 of GM make or equivalent with 8 module cover plate (With support frame) of model no:PK SB 08 011 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 8,486.16 | |
| — | Breakup | for details. | — | ||
| Supply and fixing of surface mounting plastic gang box-18 module of model no:JS 18 010 of GM make or its equivalent make with 18 module cover plate (With support frame) of model no:PK SB 18 010 - CASABLANCA of GM make or equavalant comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 12,884.16 | |
| — | Breakup | for details. | — | ||
| Supply and fixing of surface mounting plastic gang box-4 module of model no:JS 04 003 of GM make or its equivalent with 4 module cover plate (With support frame) of model no:PK SB 04 004 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 4,993.44 | |
| — | Breakup | for details. | — | ||
| Supply and fixing of of Modular Dummy Plate for modular switch boards | — | — | — | 2,111.52 | |
| — | Breakup | for details. | — | ||
| Supply, Laying, Testing and Termination of 4 core 16 sq.mm. PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to IS 694 : 2010 with its latest amendments. | — | — | — | 6,56,502 | |
| — | Breakup | for details. | — | ||
| Supply, Laying, Testing and Termination of 4 core 150 sqmm XLPE insulated underground armoured aluminium cable as per IS 7098(Part 1)1988 with latest amendments, with necassary lugs and terminations complete. | — | — | — | 11,85,810 | |
| — | Breakup | for details. | — | ||
| Supply and Erection of HDPE pipe of 110 mm outer dia of PE-100, PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 5,61,000 | |
| — | Breakup | for details. | — | ||
| Supply, Laying, Testing and Termination of 4 core 95 sqmm XLPE insulated underground armoured aluminium cable as per IS 7098(Part 1)1988 with latest amendments ,with necassary lugs and terminations complete. | — | — | — | 5,15,240 | |
| — | Breakup | for details. | — | ||
| Supply, Laying, Testing and Termination of 4 core 70 sqmm XLPE insulated underground armoured aluminium cable as per IS 7098(Part 1)1988 with latest amendments and with necassary lugs and terminations complete. | — | — | — | 2,11,696 | |
| — | Breakup | for details. | — | ||
| Supply and Erection of HDPE pipe of 75 mm of PE-100, PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 1,81,000 | |
| — | Breakup | for details. | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 50 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098(Part 1)1988 with latest amendments and with necassary lugs and terminations complete. | — | — | — | 13,09,784 | |
| — | Breakup | for details. | — | ||
| Supply and Erection of HDPE pipe of 63 mm of PE-80 grade in PN-4 size as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 4,73,000 | |
| — | Breakup | for details. | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 16 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098(Part 1)1988 with latest amendments and with necassary lugs and terminations complete. | — | — | — | 1,42,480 | |
| — | Breakup | for details. | — | ||
| Supply, Laying, Testing and Termination of LTUG 4 core 25 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098 (Part 1) 1988 with latest amendments and with necassary lugs and terminations complete. | — | — | — | 4,62,330 | |
| — | Breakup | for details. | — | ||
| Supply and Erection of HDPE pipe of 50 mm outer dia of PE-100,PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 1,80,000 | |
| — | Breakup | for details. | — | ||
| Supply and laying of 8 SWG GI wire with 40GSM Zink coated, conforming to IS:280- 2006 or latest, it is to be laid with armourd cable for earth continuity. | — | — | — | 65,400 | |
| — | Breakup | for details. | — | ||
| Excavation of cable trench in all types soils of size 400mm wide x 1 mtr. deep, and making good of the same to its original form and shape after complete including all connected materials and works up to the satisfaction of the Engineer at Site and also as per R.B JPO no: No.2003/Tele/RCIL/I Pt.IX dated 24.06.2013 The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 2,38,791.75 | |
| — | Breakup | for details. | — | ||
| HT/LT Cable laying by horizontal boring below track etc by pushing method-Drilling for horizontal bore below track by pushing method by suitable means for laying of GI pipes/ HDPE pipe etc of various sizes, the bore shall be of 200 mm dia & shall be done at a depth of 3000 mm from ground level, it also includes insertion of pipe. | — | — | — | 13,69,695 | |
| — | Breakup | for details. | — | ||
| Supply and Erection of Power cable route indicators with all connected materials and works as per Drawing No.DEE/CN/BZA/2001/23. | — | — | — | 5,850 | |
| — | Breakup | for details. | — | ||
| Excavation of cable trench in cement concrete bed flooring by using power drill to a depth of 1.0 Mtr and a width of 0.3mtr. After laying the pipe and refilling the trench with excavated earth and undertaking cement concrete bed flooring to its original shape as was prevailing earlier to the satisfaction of Railways site Engineer and also as per R.B JPO no: No.2003/Tele/RCIL/I Pt.IX dated 24.06.2013.The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 11,28,960 | |
| — | Breakup | for details. | — | ||
| Supply, fixing, connecting and commissioning of 6A 3pin/5pin modular plug socket, with 6A modular control switch on existing control board with wiring. | — | — | — | 26,349.75 | |
| — | Breakup | for details. | — | ||
| Supply and fixing of 16 Amps 3/5 pin flush type power plug and socket with modular type switch control including all accessories. | — | — | — | 3,468.64 | |
| — | Breakup | for details. | — | ||
| Supply and fixing of 6A Bell push switch with indicator conforming to IS:3854 model no.AHLSBIW100/060, one module cover plate model no.AHLPLCWV01, 1/2 module flush metal box model no.AHZXMIZX01 of Havells make or equivalent make including all other connected accessories complete. | — | — | — | 4,661.18 | |
| — | Breakup | for details. | — | ||
| Supply and erection of 10W LED Bulk head fitting with Pressure die cast alluminum with opal diffuser with IP 65 Protection etc., complete., | — | — | — | 1,10,448 | |
| — | Breakup | for details. | — | ||
| Supply and fixing of 20W 4 feet LED tube light with all connected accessories complete for fixing (The supply includes accessories such as clamps, ties for extenstion wires etc for fixing) as per attached railway specification | — | — | — | 35,109 | |
| — | Breakup | for details. | — | ||
| Supply and erection of 40W 4 feet LED tube light, with all connected accessories complete for fixing (The supply includes accessories such as clamps, ties for extenstion wires etc for fixing) as per attached railway specification. | — | — | — | 23,627.34 | |
| — | Breakup | for details. | — | ||
| Supply and fixing of 120W LED Flood light fitting with all connected materials complete as per attached railway specification. | — | — | — | 82,922.32 | |
| — | Breakup | for details. | — | ||
| Supply and Erection of of LED flood light fittings 60 W with all connected accessories as per attached railway specification. | — | — | — | 92,840 | |
| — | Breakup | for details. | — | ||
| Supply and Erection of energy efficient BLDC star electric ceiling fan of 1200mm sweep as per attached railway specification and including necessary plastering, masonry work and clamps nuts bolts etc... | — | — | — | 14,141.15 | |
| — | Breakup | for details. | — | ||
| Supply, running, connecting of 1 core 10 Sqmm FRLS, PVC heavy duty insulated mutlti stranded Copper conductor cable with necessary accessories like cable ties etc. IS 694 (2010) with latest amendments. | — | — | — | 1,32,000 | |
| — | Breakup | for details. | — | ||
| Supply, Erection and connecting of Cable Junction Boxes IP 55 / IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 2404 of Hensel make or equivalent make with necessary terminals suitable for cables upto 240 Sq.mm and all necessary accessories complete. | — | — | — | 85,480 | |
| — | Breakup | for details. | — | ||
| Supply, Erection and connecting of Cable Junction Boxes IP 55 / IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 1204 of Hensel make or equivalent make with necessary terminals suitable for cables upto 150 Sq.mm and all necessary accessories complete. | — | — | — | 48,240 | |
| — | Breakup | for details. | — | ||
| Supply, Erection and connecting of Cable Junction Boxes IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 7004 of Hensel make or equivalent make conforming to IS:13573/92, IEC 60947-3 wit its latest amendments, with necessary terminals suitable for cables upto 70 Sq.mm and all necessary accessories complete. | — | — | — | 4,66,095 | |
| — | Breakup | for details. | — | ||
| Supply, Erection and connecting of Cable Junction Boxes IP 55 / IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 9255 of Hensel make or equivalent make conforming to IS:13573/92, IEC 60947-3 wit its latest amendments, with necessary terminals suitable for cables upto 25 Sq.mm and all necessary accessories complete. | — | — | — | 14,160 | |
| — | Breakup | for details. | — | ||
| Supply and Erection of 50mm dia GI Pipe 'B' class with threaded at both ends up to 75mm length with coupling/flanges complete confirming to IS: 1239 (Part-I) 2004 with its latest amendments. | — | — | — | 82,350 | |
| — | Breakup | for details. | — | ||
| Supply and erection of 80mm dia GI Pipe 'B' class with threaded at both ends up to 75mm length with coupling/flanges complete confirming to IS: 1239 (Part-I) 2004 including Joints, bends couplings and all necessary accessories complete. | — | — | — | 88,500 | |
| — | Breakup | for details. | — | ||
| Supply and erection of 100mm dia GI Pipe (Medium ) 'B' class with threaded at both ends up to 75mm length with coupling/flanges complete confirming to IS: 1239 (Part-I) 2004 including Joints, bends couplings and all necessary accessories complete. | — | — | — | 2,57,800 | |
| — | Breakup | for details. | — | ||
| Supply installation, Testing & commissioning of 250 Amp feeder pillar with all necessary accessories complete as per instructions of site supervisor. | — | — | — | 51,603 | |
| — | Breakup | for details. | — | ||
| Supply installation, Testing & commissioning of 250 A, 36 kA, 4 pole microprocessor MCCB suitable for isolation with (i) adjustable over load setting Ir = 0.4 to 1 of times of In, (ii) adjustable short circuit current setting Isd = 1.5 to 10 times of Ir, (iii) Ics = 100% Icu as per IEC 60947-II, (iv)Ground fault setting Ig = 0.2 to 1 times of In, including supply and provision of spreaders and barriers. | — | — | — | 89,880 | |
| — | Breakup | for details. | — | ||
| Cement concrete solid block masonry in foundation and plinth or wall with factory made blocks with cement concrete 1:3:6 with all labour complete. (The wall should be properly plastered as per the advise of site supervisor) | — | — | — | 40,443 | |
| — | Breakup | for details. | — | ||
| Excavation of earth for one pit in any soil andrefilling as per Drg.NO. RE/33/P702/ MOD.F | — | — | — | 14,819.85 | |
| — | Breakup | for details. | — | ||
| Supply and erection of Earth Electrode as per the RDSO Drg No. ETI/OHE/P/ 7021 (REV.A) or if any latest. | — | — | — | 75,944.7 | |
| — | Breakup | for details. | — | ||
| Drilling of 26 Nos of 12 mm dia holes on Earth Electrode | — | — | — | 7,267.5 | |
| — | Breakup | for details. | — | ||
| Supply and erection of Charcoal | — | — | — | 22,639.5 | |
| — | Breakup | for details. | — | ||
| Supply and erection of Salt | — | — | — | 15,655.5 | |
| — | Breakup | for details. | — | ||
| Provision of RCC earthpit hollow box of size 300 mm x 300 mm x300mm with 50 mm wall thickness as perDrg. no.SDO/RDSO/E&B/001 by using M20 Grade precast RCC. It includes fixing of earth pits at various locations (All the required men, material and transportation are to be arranged by contractor). Supply and Erection of RCC precast slabs with hook to cover Earth pitsof dimensions as shownin IRSEM drg no 19-D6. All the required materials for this worki.e. stones, cement, ironand sand etc. are to be supplied by contractor.) | — | — | — | 39,143.7 | |
| — | Breakup | for details. | — | ||
| Transportation charges including loading & unloading of earthing arrangements system material to site / location. | — | — | — | 11,184.75 | |
| — | Breakup | for details. | — | ||
| Supply erection, testing and comissionin of Maintenance free earthing with all necessary accessories complete according to IS 3043-1987 and as per RDSO spec No: rdso/spec/ps/0109(rev.0)-2008 Amendment'1'. | — | — | — | 3,86,451 | |
| — | Breakup | for details. | — | ||
| Supply and Erection of Copper Strips (25 mm x 3 mm) for Equipment Earthing | — | — | — | 2,24,460 | |
| — | Breakup | for details. | — | ||
| Design, Fabrication, supply, installing and fixing of 300 mm width, 62.5 mm depth, 2mm thick sizes perforated G.I tray (cable Tray) including Horizontal stiffener to avoid sag of tray and vertical bends reducers, tees, cross members and other accessories including fixing with suitable G.I. Clamps / G.I. angles / G.I. flats and with necessary connected hardware etc. | — | — | — | 2,83,850 | |
| — | Breakup | for details. | — | ||
| Supply and Installation of 150mm x 50mm x 2mm thick GI perforated cable tray with cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete. | — | — | — | 86,480 | |
| — | Breakup | for details. | — | ||
| Shifting, carrying, transportation, installation, testing and commissioning of DG set Cap 500/320/125/110/100 KVA from CTO station to Pakala station including AMF Control panel, batteries, battery chargers, cabling, trenching, connection to panel and c/c foundation for panels if reqd. with including all necessary accessories for carried out the work etc (Cable will be supplied free of cost by railway) | — | — | — | 13,552.06 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Technicalspecifications--9-26.pdf
ATTACHMENT
Scopeofworkforwiring.pdf
ATTACHMENT
NITIREPSWorks.pdf
ATTACHMENT
CEGETechnicalCircular07-04-2022_compressed.pdf
ATTACHMENT
ListofLikelySuppliers.pdf
ATTACHMENT
GCC_April-2022WithCorrectionSlips._compressed.pdf
ATTACHMENT
RlyBd-JPO-DiggingofCables2013-Re-Circulatedin2022-LATEST.pdf
ATTACHMENT
EarthingSpecificationMFEandOther.pdf
ATTACHMENT
RITESInspection.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].