Providing LWSS to NC PC Habitation Roda Nallah Satahan in GP Lagdhar Tehsil Sadar Distt Mandi HP

Amount

Providing form work with steel plates 3.15 mm thick welded with angle iron in frames 30x30x5 mm, so as to give a fair finish including centering ,shuttering, propping etc.with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plain concrete work in:-Beams, cantilivers, griders and bricks lintel sides and sofits of beams, beams hounchings, cantiliver griders bressumers and lintel not exceeding 1 mtr depth in all leads and lifts.

Providing form work of ordinary timber plankings so as to give a rough finish including centering, shuttering proping etc height of proping and centering below supporting floor to ceiing not exceeding 4 meter and removal of the same for-in-situ-reinforcement and plain concrete work in:- Arches dome, vaults upto all span in all leads an dlifts.

Providing and laying cement concrete 1:1.5:3 ( 1cement:1.5 sand: 3 crushed stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement for reinforced concerete work in :- Beams, cantilivers, griders and bricks lintel sides and sofits of beams, beams hounchings, cantiliver griders bressumers and lintel not exceeding 1 mtr depth in all leads and lifts. .

Providing and laying cement concrete 1:2:4 ( 1cement:2 sand: 4 crushed stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement for reinforced concerete work in :- .Suspended floors Dome roofs, Landing and shelves and their support balconies beams griders bressumers and cantilivers upto floor two level in all leads and lifts.

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two level in all leads and lifts.

Steel work welded in built up sections,trusses and framed work ,including cutting,hoisting ,fixing in position and applying a priming coat of red lead paint:- In gratings framed guard bars, ladders, railing, brackets and similar works in all leads and lifts.

Providing and fiixng wire guage shutter using galvanized MS wire guage of IS guage designation 85 G with wire of dia 0.56mm for doors, windows and clerestory windows including black enamelled iron butt hinges with necessary sacrews. 40 mm thick (2nd class deodar wood) in all leads and lifts.

Providing and fixing of MS Fabricated Protection Panel having size 750 mm x 750 mm made with MS Angle 40 x 40 x 4 mm for frame, MS Angle 30 x 30 x 3 mm for cover, MS Flat 25 x 5 mm for fixing of sliding door bolt and MS Sheet 3.15mm thick for protection of manhole covers of storage tanks including the cost of cutting and welding of MS angle, MS Flat & MS Sheet, embedding in RCC Slab by drilling holes in MS angle & in RCC slab, provision for providing and fixing sliding door bolt 300 x 16 mm, MS Handle 100 mm, Lock and applying a coat of red oxide paint and painting two coat with steel paint (Firoza Blue) complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.

Raj Kumar

Chandan Parkash