Necessary Repairing Works in Muni. School, Municipal Aaganwadi and making new Aaganvadi Ognaj Gam, Mahatma gandhi vasahat, vasantnagr township, TP-32 , Gota gam and other different places in Gota Ward in North West Zone.

Excavation for foundation up to1.5 m depth including

sorting out and stacking of useful materials and

disposing of theexcavated stuff upto 50 Meter

lead.(A)Loose or soft soil

1 Upto 1.5 mt Depth 115.92 Cmt

1 1.5 to 3.0 mt.depth 158.4 Cmt

Filling available excavated earth (excluding

rock) in trenches, plinth, sides of foundations etc.

2 1 in layers not exceeding 20 cm. in depth 129.1 Cmt

consolidation each deposited layer by ramming and

Providing and laying cement concrete1:5:10

(1-Cement: 5- coarses sand and:10-hand broken

stone aggregates 40mm nominal size) and

3 1 curing complete excluding cost of formworkin (A) 2492.51 Cmt

Foundation and Plinth.

Providing and laying cement concrete1:4:8 (1-

Cement: 4- coarses and:8 hand broken stone

4 1 aggregates 40mm nominal size) and curing 2653.67 Cmt

complete excluding cost of formworkin (A)

Foundation and Plinth

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- coarse sand : 6- hand broken stone

5 1 aggregates 40 mmnominal size) and curing complete 2976 Cmt

excluding cost of formwork in (A) Foundation and

Providing and laying cement concrete 1:3:6

(1-Cement:3-coarse sand:6- crushed stone

6 1 aggregates 20mm nominal size) and curing 4006.15 Cmt

complete including cost of formwork in (A) wall

Providing and laying cement concrete

work 1:2:4 ((1-Cement:2- coarse sand:4-graded

7 aggregates 20mm nominal size)

curing complete excluding cost of formwork

and reinforcement.

Foundations, footings, base or columns and mass

Slabs, landing, shelves, balconies, lintels, beams,

b 1 girders and cantilivers upto floor two level 4012.47 Cmt

Independent piers, columns, and pillars, upto floor two

Provdg. & laying cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregates

20 mm nominal size) for reinforced

concrete chhajjas not exceeding 10 cm. thickness

upto floors two level including finishing the

8 1 exposed surfaces with cement mortar 1:3 (1 6487.07 Cu.M.

cement : 3 find sand) to give a smooth and even

surface centering and form work and curing

complete excluding cost of reinforcement.

Providing and laying controlled cement concrete

/ Ready Mix Concrete of M-200 and curing

9 complete, excluding the cost of form work

and reinforcement for reinforced concrete work in:

Foundations, footings, base of columns, and mass

Walls from top of foundations /level up to floor Two

Slabs,landing,shelves,Balconies Lintels, Beams,

Girders and Cantilever upto floor

Columns, pillars, posts, and struts, up to floor two level.

Staircase up to floor two level. (excluding landing)

(K) 0 Vertical and horizontal fins up to floor two level. 4701.97 Cu.M.

Providing and Laying ordinary cement

concrete 1:2:4 (1-Cement 2- coarsesand: 4-

graded stone aggregates 20 mm nominal size)

and finishing smooth with curing etc. complete

10 1 including the cost of form work but excluding the cost 6241.78 Cum

of reinforsement for R.C.C work in (iv) Slabs

having more than 13 cm and upto 15 cm.thickness

Providing and Laying ordinary cement

concrete 1:2:4 (1-Cement 2- coarsesand: 4-

graded stone aggregates 20 mm nominal size)

and finishing smooth with curing etc. complete

11a 1 including the cost of form work but excluding the cost 7401.59 Cum

of reinforsement for R.C.C work in (iv) Slabs having

more than 8 cm and upto 10 cm.thickness

Brick work using common burnt clay

building bricks having crushing strength not

12 less than 35kg./Sq.Cm.in foundation and plinth

in Cement Mortar1:6 (1-Cement :6 - fine

100 (A) Conventional (upto 10 ton) 3981.21 Cmt

1 B) Modular 4241.7 Cmt

Extra Rate for brickwork in Above Item for

13 super structure above plinth level upto floor two level

(B) Conventional

a 100 (A) Conventional 272.25 Cmt

b 1 B) Modular 262.35 Cmt

C) above floor two level Item No. 2(6.13) (A) Modular Per Floor

c 50 42.66 Per Cum

D) above floor two level Item No. 2(6.13) (B) Per Floor

d 50 40.09 Per Cum

Half brick masonry in common brunt clay

building bricks having crushing strength not less

14 20 than 35 Kg/Sq.Cm. in Cement mortar 1:5 ( 1-Cement : 583.49 Smt

5 coarse sand ) in foundation and

Plinth conventional brickwork

Extra for half brick masonry in super

15 20 structure above plinth level upto floor two 433.4 Smt

level (B) conventional

Providing form work in ordinary timber planking

so as to give a rough finish including centering,

shuttering, strutting and propping etc. height of

propping and centering below supporting floor to

16 celling not exceeding 4 M & removal of the

same for in situ reinforced or plain concrete work

upto floor four level

Foundation, footings, bases of columns etc. and

(B) Flat surfaces such as soffits of supspened floors

b 250 slabs Landings and the like. (1) Floors etc. upto 200 252 Smt

mm in thickness.

(B) Flat surfaces such as soffits of suspended floor roof

c 250 slabs Landings and the like. (2) Floors etc. above 270.9 Smt

200mm in thickness.

Vertical surface such as walls (any thickness)

d 100 partitions and the like including attached buttresses 229.95 Smt

& string course & the like.

(ii) Sides And Soffits Of Beam, Haunchings

e 100 Cantilevers, Girders, Bressumers And Lintels Not 192.15 Smt

Exceeding 1 M In Depth.

(G) Columns PillarsPosts and struts. (1) Square

Rectangular Polygonal in plan.

g 50 (2) Circular or curved in plan. 422.1 Smt

(H) (2) Sides and soffits of Beams Beam

h 100 Haunchings canti-levers Girders Bressumers and 259.88 Smt

Lintels exceeding 1M.in Depth.

Providing and fixing 35 mm thick panelled,

glazed or panelled and glazed shutters for Doors

windows and clear story windows including

17 anodised alluminium But hinges with necessary

screws and indian teak wood shutters with.

a 1 (A) Plywood sheet panels. 3459.09 Smt

b 1 (B) Particle board panels 3464.51 Smt

c 1 (C)Hard board panels. 3433.65 Smt

d 1 (D) Asbestos sheet panels. 3406.53 Smt

Providing and fixing 25 mm thick shutters for

cup boards etc. including black enamelled

18 1 M.S. butt hinges with necessary screws.(A) Indian 3006.75 Smt

teak wood. (i) Fully Panelled.

Providing and fixing 25 mm thick shutters for

cupboards etc. including anodised alluminiu butt

hinges with necessary screws. (A) Indian teak wood.

(ii) Fully Glazed.

Providing and fixing 25 mm thick shutters for

cupboards etc. including anodised alluminiu butt

hinges with necessary screws. (A) Indian teak wood.

(ii) Partly panelled and partl glazed.

Structural steel work ( Confirming to IS 4923- 1997)

riveted, bolted or welded in builtup for all type sections,

in framed work, including cutting, hoisting, fixing in

position and applying a priming coat of approved steel

primer all complete as per the structural designs and

19 2000 directions of Engineer in charge.Column ( 122 x 61 x 115.73 kg

3.6mm ) (R and B SOR FOR BUILDING WORKS

AHMEDABAD CITY 2021_22) Item Code 20054)

Providing and fixing glazed louvered glass

windows and ventilators with teak wood frame

10 cm. x 7 cm. size including 3 coats of oil

painting to wood work etc.complete.

Providing and fixing glazed louvered glass

windows and ventilators with teak wood frame

10 cm.x7 cm. size including 3 coats of oil

21 1 painting to wood work etc.complete.with wooden 4332.47 Smt

louvers plank 12mm thick

Providing and fixing 35 mm thick shutters for

Doors, windows and clere story windows

including Indian teak wood frames 10 cm x 7 cm.

22 1 size including anodized alluminium fixtures 4595.06 Smt

and fastenings including primer coat of approved

quality and two coats of oil painting etc, complete.(ii)

Providing and fixing 35 mm thick shutters for

Doors, windows and clere story windows

including Indian teak wood frames 10 cm x 7 cm.

size including black enamelled iron oxidixed

23 1 fixtures and fastenings including primer coat of 5285.45 Smt

approved quality and two coats of oil painting etc,

complete.(ii) Fully Panelled.

Providing and fixing 35 mm thick shutters for Doors,

windows and clerestory windows including Indian teak

wood frames 10 cm x 7 cm. size including anodized

a 1 alluminium fixtures and fastenings including primer 4940.25 Smt

coat of approved quality and two coats of oil painting

etc, complete. (iii) Partly panelled and partly glazed.

Providing and fixing 30 mm thick FACTORY

MADE SOLID PANEL PVC DOOR SHUTTER

consisting of frame made out of M.S.tubes of

gauge thickness and size of 19 mm x 19 mm for stiles

and 15 mm x 15 mm for top and bottom rails.M.S.

frames hall have a coat of steel primers of

approved make and manufacture, M.S. frames hall be

covered with 5 mm thick heat moulded PVC ‘C’

channel of size 30 x 50 mm formings tiles, and

mm thick 75 mm wide PVC sheets for to prail, lock rail

and bottom rail on either side, and 10 mm (5 mm x 2)

24 2 thick, 20 mm wide cross PVC sheet as gap insert 1135.02 Smt

for top rail and bottom rail, Panelling of 5 stiles

and rails with 30 mm wide x 5 mm thick PVC sheet

beading on eighter side, and joined together with

solventcement adhesive,. An additional 5 mm thick

PVC strip of 20 mm width is to be stculkon the interiors

side of the ‘c’ channel using PVC

solvent cement adhesive etc. complete as per

direction of Engineer incharge, manufacture’s

specification and drawing.

Providing and fixing in position collapsible

steel shutters with vertical channels 20 x 10 x

mm braced with flat iron diagonal 20 x 5 mm size

with top and bottom rails T iron 40 x 40 x 6 mm with

25 2 38 mm dia steel pulleys complete with bolts, nuts, 5391.23 Sq.M.

locking arrangements, stoppers, handles,

including a priming coat of red lead paint &

Providing and fixing 1 mm thick M.S. sheet

sliding shutters with frame and diagonal braces

of 40x40x6 mm angle iron, 3.15 mm M.S.gusset

plates at Junctions and corners 25 mm dia.

pulley, 40x40x6 mm angle and T- iron guide

26 2 rail at top and bottom respactively with 3652.12 Sqm

handles, stoppers and locking agangement etc,

including applying a priming coat of red lead paint.

Providing & Fixing in position Alluminium

doors with frame using approved quality

anodised extruded alluminium section as

approved by Engg.in charge(Jindal alluminium) (a)

Frame sections 101.6x44.45 mm (b) Shutter bottom

vertical & top section 83.5x44.45 (wt.1.31

kg/mt.)(at 1.31 kg/mt) (c) Shutter bottom

section at 114.3x44.45 mm at (1.37kg/mt)

27 2 Shutter middle section at 100x44.3 wt.(1.37 kg/mt) 2,900.00 Smt

incl.providing & installing 5 mm thick

approved color Acrylic sheet of standard quality

fixed with glazing chips on upper pannel &

Laminated sheet on lower pannel

(wtt.0.13 kg/Rmt) etc.comp.as direction of engg.in

Providing and fixing extruded aluminum window

having extruded aluminum Colour r Powder Coated

section frame main outer size 127mm x 38.10mm x

1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four track

member size 122.20mm x 31.75mm x 1.10mm @ Wt.

1.205 Kg/mt,vertical member of size 122.20mm x

31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt with sliding

28 2 shutters of horizontal member size 40mm x 18mm x 2119.14 Sq. M.

1.29mm @ wt.of 0.456Kg/mt,vertical member of size

40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,@ with

5 mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc complete for window.

Providing & Fixing in position Alluminium

vents with frame using approved anodised

extruded alluminium section as approved by

Engg. In charge.(Jindal alluminium) units

29 2 equivalent Approved Rate)Frame section of 1,950.00 Sq. M.

63.50 x 38.50 mm. (wt. 0.68Kg/Rmt) incl.

Providing & Installing 5 mmthick approved color

Acrylic sheet of standard quality etc. comp.

Providing and fixing standared extruded of

alluminium section of size 63 mmx38.10

mmx1.2 mm (Jindal Section:2434, or equivalent @

30 2 Wt.0.643 Kg/mt) with colour anodized 1163.92 Sq. M.

alluminium frame for ventilation with 5 mm

thick frosted glass as details etc complete for

Providing and fixing standared extruded of alluminium

section of size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg

/ Rmt with colour Powder Coated alluminium frame

Providing and laying 40 mm thick marble chips

flooring rubbed and polished (I.E.terrazo) to

granolithic finish with under layer 30 mm thick cement

concrete1:2:4 (1-Cement: 2-coarse sand: 4-graded

stone aggregate 10 mm and down gauge)

and to player 10 mm thick with white, black or white

and blak marble cihps of required sizes from 1 mm to

32 1 mm nominal size laid in cement marble powder mix 3:1 811.13 Sqm

(3- Cement:1-Marble powder by weight) in

proportion of 4:7 (4- Cement: 7-marble

chips by volume) (C) Medium Shade pigment

with approx 50% white cement and 50% ordinary

cement (In top layer only) (upto 10 ton)

Providing and laying marble chips skirting

(Terrazo) or dedo rubbed, and polished to

Granolithic finish to player 6 mm white, black or

white and black marble chips of size from

smallest to 4 mm nominal size laid in cement

33 1 marble powder mix 3:1 (3-Cement: 1 marble 869.4 Sqm

powder by weight) in proportion of 4:7 (4-cement

marble powder mix: 7-marble chips by volume) (B)

Light shade pigment with white cement (In top layer

Providing and laying white glazed tiles 6mm thick in

flooring treads of steps andlanding laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse

Providing and laying Ceramic tiles 6 mm thick

in flooring treads of steps and landing laid on a

35 5 bed of 12 mm thick cement mortar 1:3 (1- cement :3- 960.47 Sq.M.

coarses and) finishing with flush pointing in white

Providing & Fixing 20 mm thick Mirror

Polished Decorative Granite Board with

Computerised Golden Letters Discription as

36 1 per instructions of engg. in charge to M.S. 4,304.00 No.

frame structure for Inaugaration & Public

Handover Function (N.S.)

Providing and laying Vitrified tiles 8 to 10 mm

thick, 36''x36'' in flooring treads of steps and

landing laid on a bed of 12 mm thick

37 1 cement mortar 1:3 (1-cement:3-coarses and) 1469.91 Sq.M.

finishing with flush pointing inwhite cement.

Providing and laying Vitrified tiles 8 to 10 mm thick,

24''x24'' in skrting risers of steps and dedo on 10 mm

38 1 thick cement plaster 1:3 (1- cement: 3-coarse 1130.15 Sqm

sand) and jointed with white cement slurry

Providing and laying Vitrified tiles 8 to 10 mm

thick, in skrting risers of steps and dedo on

39 1 mm thick cement plaster 1:3 (1-cement:3- 1523.61 Sqm

coarse sand) and jointed with white cement slurry

Providing and laying 24" x 24" vitrified

Tiles 8 to 10 mm th. Double Charged

gloosy/ Matt of Approved make as approved

by Adl.C.E. / consultants in flooring over

40 1 mm thick cement mortar 1:6 (1 cement : 6 1,527.00 Sq. M.

coarse sand)on new surface& jointed with colour

cement slurry incl with flush pointing &

cleaning the surface etc. comp.

Providing and laying 24" x 24" vitrified

to 10 mm th.Double Charged Gloosy / Matt

tiles of Approved make as Approved by Adl.C.E. /

Consultants for upto 10 cm high skirting as

41 1 approved by Engineer in charge over 10 mm thick 165 Rmt

cement mortar 1:6 (1 cement : 6 coarse sand)on new

surface& jointed with colour cement slurry incl with

flush pointing & cleaning the surface etc. comp.

Providing and laying polished Kota stone slab

flooring over 20 mm (Average) thick base of

cement mortar 1:6 (1-cement:6-coarses and) or

L.M.1.1.5 (1-Lime putty:1.5-coarses and) laid

42 250 over and jointed with grey cement slurry mixed 982.83 Sq.M.

with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A)

Providing and laying marble stone slab flooring over

20mm (average)base of cement mortar 1:6 (1-cement :

6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse

43 1 sand) laid and jointed with gray cement slurry including 2194.63 Sq.M.

rubbing and polishing complete. (A)Marble slab 25mm

Providing and laying polished Kota stone slab

flooring over 20 mm (Average) thick base of

cement mortar 1:6 (1-cement:6-coarses and) or

44 500 L.M.1.1.5 laid over and jointed with grey 1085.48 Sq.M.

cement slurry including rubbing and polishing

etc.complete. (B) 30 mm thick

Providing and laying polished kota stone slab 25 mm

thick in risers of steps, skirting Dedo and pillars laid

on 10 mm thick cement mortar 1:3 (1-Cement :3

45 1 coarses and) and jointed with gray cement 1176.03 Sq.M.

slury mixed with pigment to match the shade of

slab including rubbing and polishing etc.complete.

Providing and laying cement concrete

flooring (I.P.S.) 1:2:4 (1-cement: 2-coarses and:4-

graded stone aggregate 20mm nominal size)

46 1 laid in one layer and finished with a floating 297.68 Sq.M.

coat of neat cement. (A) 40mm thick.

Providing and laying cement concrete

flooring 1:2:4 (1-cement: 2-coarse sand:4-graded

47 1 stone aggregate 20mm nominal size) laid in one 348.08 Sq.M.

layer and finished with a floating coat of neat

cement. (B) 50mm thick.

Providing and laying broken china mosaic flooring

for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out

48 1 upto surface using white cement including 739.89 Sqm

rounding off junctions and extending them up

to15 cm along the wall, clearing with water and

oxalic acid etc.as directed.

Providing and laying coloured glazed tiles

of the size 300 mmx200 mmx8 mm/300

mmx450 mmx8 mm in skirting, risers of steps

49 1 and dedo on10 mm. thick cement plaster 1:3 1426.95 Sqm

(1cement: 3 coarse sand) & jointed with white

Providing corrugated G.I. sheet of class-3 roofing fixed

with glavanished iron J or L Hooks, Bolts and nuts

8mm diameter with bitumen and G.I. limpet washer or

G.I. limpet washer. filled with white lead complete

50 340.47 excluding the cost of purlins, Rafters and Trusses.(1) 793.1 Sqm

0.80 mm thick sheet. (R and B SOR FOR BUILDING

WORKS AHMEDABAD CITY 2021_22) Item Code

Providing and fixing 150 mm wide 450 mm over

all semi circular plain G.I.sheet class-3 gutter with

Iron brackets 40 mmx3 mm size Bolts, Nuts,

51 1 washers etc. including making necessary 555.71 Sqm

connection with rain water pipes. (i) 0.80 mm

Providing and fixing five courses water profing

treatment with bitumen felt consisting of second

and fourth course of blown/ bitumen or/and

residual bitumen applied hot at 1.2 kg.per

Sq.M.of area for each course and first course

with fibre base bitunen saturated under lay type

52 1 land third course with fibre base self finished felt type 466.84 Sqm

2 grade 1 and fifth and final course of stone grit

mm and down size or pea sizes gravel spread

at 0.008 Cu.Metre/Sq.metre

preparation of surface excluding grading complete.

Providing and fixing on wall face C.I. Rain

water pipe including filling the joints with spun

53 1 yarn soaked in neat cement slurry and cement 283.62 Rmt

mortar 1:2(1- Cement : 2-fine sand) (A) 75 mm

Providing 15 mm thick cement plaster in single

coat on Rough (Similar) side of single or half brick

54 150 walls for interior plastering up to floor two 174.83 Sqm

level and finished even and smooth in (i) Cement

mortar 1:3 (1-cement :3-sand)

Providing 20mm thick sand faced cement plaster

on walls upto height 10 metres above ground level

consisting of 12mm thick backing coat of C.M. 1:3 (1-

55 150 cement : 3- sand) and 8mm thick finishing coat of C.M. 297.68 Sqm

1:1 (1-cement : 1-sand) etc. complete.

Colour washing with lime on wall surface (two

coats) over and including a primary coat of white

washing to give an even shade after through

56 1000 brooming the surface to remove all dirt, dust, 12.29 Sqm

mortar drops and other foreigh matter.

Removing dry or oil bound distemper by

a washing and scraping and sand papering the

57 1 wall surface smooth including necessary repairs 11.19 Sqm

to scratches complete.

Distempering with dry distemper of approved brand

and manufacture (two coats) and of required shade

on wall surfaces of given an even shade, over

58 1 and including a priming coat of whiting after 46.94 Sqm

thoroughly brooming the surface free from mortar

dropping and other foreign matter.

Distempeing (Two coats) with oil bound

distemper of approved brand and manufacture

and of required shade on wall surfaces to give

an even shade, over and including a priming

coat with distemper primer of approved

59 1 brand and manufacture after thoroughly 76.08 Sqm

brushing the surface free from mortar dropping

and other foreign matter and also including

preparing the surface even and sand papered smooth.

Extra Coat for Above Item over above for

60 1 every subsequent coat of approved brand and 30.09 Sqm

Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

61 750 including throughly brushing the surface free 78.44 Sqm

from mortar droppings and other foreign matter and

sand papered smooth.

Extra over item for every sub sequent coat of wall

62 750 painting with plastic emulsion paint of approved brand 33.39 Sqm

Extra over item for painting with plastic emulsion paint

62 a 750 of approved brand on ceilings and sloping roofs. 5.36 smt

Applying priming coat over new steel and

other metel surface after and including preparing

the surface by throughly cleaning, oil, grease, dirt

63 1000 and other foreign matter and scoured with 34.34 Sqm

brushes fine steel wood, scrapers and sand paper

with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat)

on new steel and other metal surface with

enamel paint, brushing, interior to give an even

64 1000 shade including cleaning the surface an even shade 86.94 Sqm

including cleaning the surface of all dirt, dust and other

foreign matter.

Painting one coats (excluding priming coat) on

previously painted steel and other metal surface with

65 1 enamel paint, brushing to give an even shade 54.35 Sqm

including cleaning the surface of all dirt, dust and

other foreign matter.

66 1 Extra over item for every sub sequent coat of paint. 50.4 Sqm

Painting two coats (excluding priming coat)

on new steel and other metal surface with

67 1 synthetic enamel paint, brushing to give an even 64.66 Sqm

shade including cleaning the surfaceofalldirt,dust and

other foreign matter.

Painting one coats (excluding priming coat) on

previously printed steel and other metal surface with

68 1 synthetic enamel paint, brushing to give an even 43.79 Sqm

shade including cleaning the surface of all dirt, dust and

other foreign matter.

Extra over Above item for every sub sequent coat

Painting two coats (excluding priming coat) on

external surface of new rain water, soil, waste and

vent pipes and fittings with ready mixed

70 1 bituminous brushing, black, anti corrosive to give 20.16 Sqm

an even shade including cleaning of all dirt, dustand

other foreign matter.(75 mm dia)

Painting two coats (excluding priming coat) on

external surface of new rain water, soil, waste and

vent pipes and fittings with ready mixed

71 1 bituminous brushing, black, anti corrosive to give 25.05 Sqm

an even shade including cleaning of all dirt, dust and

other foreign matter.(100 mm dia)

Painting two coats (excluding priming coat) on

new wood and wood based surface with enamel

paint, interior to give an even shade including

72 1 cleaning the surface of all dirt, dust and other 26.78 Sqm

foreign matter sand papering and stopping. (a) Ready

mixed paint brushing wood primier pink.

Painting one coats (excluding priming coat) on

previously painted wood and wood based surface

with enamel paint, to give an even shade including

73 1 cleaning the of all dirt, dust and other foreign matter.(b) 26.78 Sqm

Ready mixed paintbrushing priming for enamel

Extra over Above item for every sub sequent coat of

Painting two coats (excluding priming coat) on

new wood and wood based surface with ready

mixed paint, brushing, oil, gloss, semi gloss to give

75 1 and even shade including cleaning of all dust, 104.12 Sqm

dirt and other foreign matters and papering and

Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an

required shape even shade after thoroughly

76 1 brushing the surface to remove all dirt, and 113.4 Sqm

remains of loose powdered materials.etc

Applying two coats of Birla (white cement

based) or Asian (acryliclapy- putty) or

equivalent & two coats of primer of approved brand

and manufacture on new wall surface to give an

77 1 even shade including thoroughly brushing the 40.19 Sqm

surface free from mortar dropping and other

foreign matter and sand papered smooth.

Painting one coats (excluding priming coat) on

previously painted wood and wood based surface with

78 1 enamel paint, to give an even shade including cleaning 55.13 Sq.M.

the of all dirt, dust and other foreign matter.

Writing letter or figures on any surface with

black japan paint (stops, comas, hyphens and

the like not to be measured and paid for per

separately) (i) Block (Letters/Figures) (Per 10 Letter letter

Demolition including stacking of serviceable

materilas and disposal ofunserviceable

materials with all lead and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry

including stacking of serviceable materil as and

disposalof unserviceable materials with all lead

and lift.(ii) In Cement Mortar.

Dismentaling tiled of stone floors laid in mortar

including stacking of serviceable materil as and

disposal of unserviceable materials with all lead and

Dismentaling of sheet roofing including

ridges, Hips, Valleys, Gutters etc. stacking of

83 1 serviceable materil as and disposal of 47.25 Sqm

unserviceable materials with all lead and lift.(i)

G.I.sheet roofing.

Dismentling steel work including distempering

84 2000 and stacking the materials with all lead and lift. 2.42 Kg.

Dismentling doors, windows, ventilators etc.

(wood or steel) shutters including chowkhats

architraves, hold fasts and other attachment

85 1 etc. complete and stacking the material within all lead 185.85 Each

and lift.(i) Not exceeding 3 Sq.M.in area.

Dismentling doors, windows, ventilators etc.

(wood or steel) shutters including chowkhats

architraves,hold fasts and other attachment

86 1 etc. complete and stacking the material with in 248.85 Each

all lead and lift.(ii) Exceeding 3 Sq.M.in area.

Dismentling barbed wire in fencing including

making rolls and also including dismentling

fencing posts including all earth work concrete in base

and making good the disturbed ground

87 1 stacking useful materials as directed and 66.15 Rmt

disposing as directed and disposing of

the unserviceable materials with all lead and lift.

Dismentling C.I. pipes G.S.W. pipes abd A.C.

rain water pipes with fittings and clamps including

stacking the materials with all lead and lift (for

any dia, of pipe)

Dismantling santtary fittings like wash basin.

W.C. pan Indian and Europe an type, flushing tank

etc. including stacking the materials with all lead

Scraping oil paint from steel and other metal

90 2 surface and making the surface even (with Hand 48.83 Smt

Removing and scraping of old deteriorated

plaster of any thickness from wall / R.C.C

member including stacking of serviceable

91 1 material and disposal of unserviceable from site of 19.38 Smt

work with all lead and lift

Providing and fixing M.S. fan clamps of

92 1 shape and size as specified in existing R.C.C. slab 168.53 Each

including cutting chase and making good.

Cutting out cracks of roof terrace to V-section,

93 1 cleaning out, wetting, grouting with cement and 64.58 Rmt

sand slurry 1:3 (1-cement 3-sand )

Cutting out cracks roof terrace to V-Section

cleaning out and filling solidly with a hot

mixture of bitumen and clean dry sand (1:1 by

Providing & Fixing in position Alluminium

doors with frame using approved quality

anodised extruded alluminium section as

approved by Engg.in charge(Jindal alluminium)(a)

Frame sections 101.6x44.45 mm (b)

Shutter bottom vertical & top section

Shutter bottom section at 114.3x44.45 mm at

95 1 (1.37 kg/mt) Shutter middle section at 100x44.3 2,900.00 Sq. M.

wt.(1.37 kg/mt) incl.providing & installing

mm thick approved color Acrylic sheet of

standard quality fixed with glazing chips on

upper pannel & Laminated sheet on lower

pannel (wtt.0.13 kg/Rmt) etc.comp.as direction of

Providing & Fixing in position Fully Panelled /

Partly Panelled Partly Glazed / Fully Glazed

Alluminium doors with frame using approved quality

anodised extruded alluminium section as

approved by Engg. In charge.(Jindal alluminium )(a)

Frame sections 101.6x44.45 mm b) Shutter

vertical & top section 83.5x44.45 (wt.

1.31 kg/mt.)( at 1.31 kg/mt) © Shutter bottom

96 1 section at 114.3 x44.45mm at ( 1.37 kg/mt ) 4,583.00 Sq.M.

Shutter middle section at 100x44.3 wt. (1.37 kg/mt )

incl. providing & installing 5 mm thick Glass of

standaed quality fixed / 12 mm thick Laminated

sheet with glazing chips (wt. 0.13 kg/ Rmt) in

panels etc. comp. as per Detail Given & direction

of engg.in charge.

Providing & Fixing in position Alluminium

window 2/3/4 track sliding / fix type with

frame using approved anodised extruded

alluminium section as approved by Engg. In

97 1 charge.(Jindal alluminium) units equivalent. 4,518.00 Sq. M.

including P/F installing 5 mm thick clear/tinted

Glass of standard quality etc.comp.

Providing & Fixing in position Alluminium

vents with frame using approved anodised

extruded alluminium section as approved by

Engg. In charge.(Jindal alluminium) units

98 1 equivalent Frame section of 63.50 x 38.50 mm. 4,218.00 Sq. M.

(wt.0.68 Kg/Rmt) incl. Providing & Installing

mm thick Glass of standard quality etc. comp.

Providing and fixing of Ridge flashing for

roof panel shall be made out of 0.5 mm thick

pre coated GI sheet. The Pre coatedsheet shall

be of minimum 240 mpa steel grade

confirming to IS 14246:1995 and shall have zinc

coating of minimum 120 gsm as per

IS:277:1992, 5-7 microns epoxy primer on both

side of the sheet and polyester top coat 15-18 micron.

99 1 The PP GI Sheet shall have plastic protective 510.1 Sqm

guard film of minimum 25 microns to avoid

scratches during transportation. The ridge shall

be fixed to the steel members by poprivetor

self drilling/self stitching fastners @ maximum

450mm c/c along length of capping/flashing etc

Supplying and fixing vinyl flooring over the

surface having 1-2 mm thickness as per

directed by engineer incharge etc as

completed (N.S.)

Providing and laying 15mm bamboza

wooden flooring as per architect's drawing

with all necessary details as directed by

101 1 the project consultants. Use underlay for 2,690.00 Smt

better result as per Detail specifications and

directed by the project consultants. (N.S.) Approved

Providing and fixing 1.20 Metre high fencing

with 2.0 Metre long M.S. Angle posts 40 mm x

mm x 6 mm and oil painting 3 coats fixed at

Mt, C/c. with five Horizontan lines and two

diagonals of galvanised steel barbed wire

102 1 weighting 9.38 Kg. per 100 Metre, strained and fixed 385.4 Rmt

to posts with G.I, staples including fixing the

posts in ground with 0.5 M x 0.5.M x 0.5 M.

block in C.C 1:5:10 etc complete.

Renovation and Repairing work in Chainlink

fencing any size and also refixing work incl.

103 500 febrication work with all materails to be painted 735 Rmt.

one coat of primer and twocoats of paint as directed

inline and level. (N.S.)

Constructing a sink (chowkedi) with C.C.

1:2:4, 12 cm. thick over B.B. masonry in C.M,

(1:6) in front and dwarf wall 1.0 Mt. high and

104 1 cm. thick cement plaster to masonry / in C.M.1:3) 2235.66 Rmt

and cement concrete flooring in 1:2:4:mix

5cm.dia.drain pipe etc.complete.

Constructing a cooking platform 60 cm. width and

70 cm high resting on B.B. Masonry walls

cm. thick in C.M. (1:6) with (i) Fixing or

105 1 precast R.C.C. 1:2:4) 8 cm. thick slab with marble 933.98 Rmt

chips set in C.M. (1:6) (6 mm thick terrazo) with

plastering on exposed faces walls in C.M. (1:4) etc

Extra rate for using Ready Mix Concrete of

any grade for below ground level to vertical upto

any floor with delivery & suction Pipe & Pump etc.

106 1 The rate includes fule, pump operator, skilled labor, 760 Cmt

driver etc completed and as per direction of engineer in

P/A Tremix with dewartering machine and

floater machine on constructed CC work for

finishing the surface as per requirement. The

107 1 rate including all machinaries, labor, loading, 54 Sq.M.

unloading, transportaion etc complete as per

direction given by engineer incharge.

Carrying out timber treatment to all wood work

including drilling holes and spraying oil based

chemical solution on surface of timber work for

termite control including labor and material etc.

complete. Using Chlorpyriphos20 EC as per 6313

Part III (1% concentration by mass) is recommended

108 1 one litre chemical emulsion diluted with 19 liters of 54.98 Smt

kerosene. Total diluted concentration will be 20 liters

inclusive of 1 liter chemical emulsion application in

drilled holes and 0.75 / Litre chemical per one Sqmt

two coat on wood surface not protected by paint or

Applying general insecticide pest control treatment to

floors, cupboards etc including labour materials etc.

complete. Using Imidacloprid 30.5 SCas Per IS

6313 part -II( (0.075% concentration by mass) is

109 1 recommended 10.5ml chemical diluted with 5 liters 88.4 Smt

of water application 0.5 litre chemical /Sqm of surface

is recommended as per I.S.

Carring out plinth treatment to post construction /

existing structure by spraying chemical solution

for termite control treatment including labour and

material consist ment with I.S. specification.

Using Chlordene and Chior purfiles 20 EC. As

Per 6131_paret-II Consentration Weight on percentis

110 1 recommended i.e one litre 20 EC chemical 104.9 Smt

emulsion with 19 liter give 1% concrentration

inclusive of one litre chemical emulsion

appication attherate of 5 Litre chemical / Sqm

of surface is recommended as per I.S

Carrying out wall treatment for termite control

including spraying with chemical solution in oil base

including labour and material Using Chlorpyriphos

ECAs per IS 6313 part - II (1% concentration by mass)

is recommended i.e one litre chemical emulsion diluted

111 1 with 19 liter oil base. Total solution will be 20 liters 37.34 Smt

inclusive of one liter chemical emulsion application at

the rate of 7.5 litre chemical / Sqm of surface is

recommended as per I.S.S

Providing erecting and fixing double

coated Syntex or equivalent PVC.(ISI) water

112 2000 tank of required capacity each with all 3.91 Litre

necessary fittings and connection etc. complete

Providing and fixing to wall, ceiling and floor

galvanised Mild steel tubes(Medium grade) of

113 the following nominal bore, tube fitting and clamps

including making good the wall ceiling and floor.

1 (F) 50mm 779.6 Rmt

Providing and laying in trenches galvanised

mild steel tubes (Midium grade) of the

114 following nominal bore, and tube fitting

(Earth work in trenches to be measured and paid

for separately)

Making connection of galvanised Mild steel

distribution branch with galvanised mild steel main

115 1 50 mm to 80 mm nominal bore by providing 600.08 Each

and fixing tee including cutting and threading the

pipes complete.

Providing and fixing to wall ceiling and floor

Kg.F/Cm2 working pressure poluthene pipes of

the following out side Dia. Low densidy,

116 complete with special falnge compression type

fittings,wall clips etc.including making good

the wall ceiling and floor.

Providing and fixing to wall ceiling and floor

10.0Kg.F/Cm2 working pressure polythene pipes

of the following out side Dia. Low

117 densidy, complete with special falnge

compression type fittings, wall clips etc.

including making good the wall ceiling and floor.

1 (C) 32mm 116.4 Rmt

Providing and fixing cast iron (Spun) Nahni

trap of the following nominal diameter of self

cleaning design with C.I. screaed down or

118 1 higned grating including cost of cutting and 600.08 Each

making good the walls and floor 100 mm inlet and

mm outlet.(C)100mm dia.

Providing and fixing water closet squatting

Pan (Indian type W.C.Pan) size 580 mm

(Earth work, bed concrete, foot rest and trap to be

119 1 measured and paid for separately) (A) Vitreous 926.1 Each

China. (I)Long pattern = White colour

Provdg. & fixing wall mounted White /

Color Vitreous China European water closet

with integral P trap of "Cera" - Clair Series or

120 1 equivalent incl. seat cover , Chair Bracket etc. 4,250.00 No.

complete as per direction of engg. In

Providing and fixing wsh down water closet

(Europe an type, W.C.Pan) with integral P or S

trap including jointing the trap with soil pipe in

121 1 Cement Mortar1:1 (1- Cement:1-fine sand) 1290.8 Each

(Seal and cover to be measured and paid

forseparately) (A) vitreous China Pattern :(i) in

Provdg. & Fixing Flat Back Large Urinal of White/

colour of "Cera" or " Hindware" incl. C.P. Brass

122 1 waste coupline , waste pipe, 1,850.00 No.

pvcconnection etc. Complete.( size 635 x395x420

Providing & Fixing Angle cock of " Ess Ess" -

Trend series or equivalent standard make as

approved by engg. in charge all complete. (N.S.)

Providing and fixing 100 mm size P or S

trap for water closet squatting pan including

124 1 jointing the trap with the pan and soil pipe in 311.85 Each

cement Mortar1:1 (1 Cement : 1-Fine sand)(A)

Vitreous China.

Providing and fixing wash basin with single hole

for pillar tap with C.I.or M.S. brackets painted white

including sutting holes and making good the same

125 1 but excluding fittings. (A) Vitreous China: (ii) Flat 1400.18 Each

Back wash basin 550 mm x v 400 mmsize.(i) In white

Providing and fixing Kitchen sink with C.I.

or M.S. brackets, painted white including cutting

holes in walls and making good the same but

126 1 excluding fittings. © Vitreous China Sink. (i) 600 2257.69 Each

mm x 450 mmx 150 mm size

Providing and fixing 600 mm x 450 mm

bevelled edge mirrror of superior glass

127 1 mounted on 6 mm thick A.C. sheet or ply wood sheet 825.48 Each

and fixing to wooden pluge with C.P. brass screws

Providing and fixing chromium plated brass halftrun

128 flush cock of approved quality including fixing in pipe

line etc. complete.

Provdg. & fixing White / Color Vitreous china

Counter wash basin with signle hole for pillar tap of

"Cera " - Concord series of 550 x425 mm size to be

fiited in stone counter with necessary brackets

painted white incl. cutting holes and making

129 1 good the same .Cost Includes P/F C.P. brass 2,950.00 No.

waste coupline, 32 mm dia fisher union ,15 mm dia.

Pillar cock & Angle cock of " Ess Ess"- Trend series

,32 mm dia. Waste pipe etc. complete as

per dir. of engg. incharge.

Providing and fixing washbasin with single holefor

pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making goodthe same but

130 1 excluding fittings.(A) Vitreous China:(ii) Flat Back 1400.18 No

washbasin 550 mm x v400mm size. (i) Inwhite colour.

Providing & Fixing S.S.304 Grade Sink of

Nirali / Krishna or Equivalent Make for

Kitchen Platform of size : 24":x18" as per

Direction of engg. Incharge

Providing and fixing C.P. brass towel rail

comlete with C.P.brass brackets fixed to wooden

plugs with C.P. brass scews.(B) 600mm x 20mm size.

Providing and fixing 600 mmx120 mm glass shelf

with C.P. brass bracket and guard rail complete

mixed to wooden plug with C.P.brass screws.

Providing and fixing toilet paper holder. (A)

Providing and fixing screw down bib taps of

135 following size. (A) Brass screw down bib tap

polished bright.

1 (i) 15mm dia. 184.98 Each

1 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of

136 following size. (B) Brass chromium plated screws

1 (i) 15mm dia. 184.98 Each

1 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of

following size. © Gun metal screw down bib tap.

1 (i) 15mm dia. 157.29 Each

1 (ii) 20mm dia. 176.09 Each

Providing and fixing pillar tap, capstan head,

138 screw down high pressure with screws, shanks and

1 (i) 15mm dia. 305.67 Each

1 (ii) 20mm dia. 351.18 Each

Providing and fixing Gun metal check or non-

return fullway wheel valve.

1 (i) 15mm dia. 184.98 Each

1 (ii) 20mm dia. 201.8 Each

1 (III) 25 MM DIA 416.47 Each

1 (E) 40mm dia 656.86 Each

Providing and fixing chromium plated brass

140 half trun flush cock of approved quality including

fixing in pipe line etc. complete.

1 (i) 20mm dia. 252.26 Each

1 (ii) 25mm dia. 261.16 Each

1 (iii) 32mm dia. 273.03 Each

Providing and fixing Urinal or approved

quality including conecting the Urinal with

waste pipe , tap etc.complete. (A) White earthen

141 1 ware flat back or corner type size 430mm x 1026.01 Each

Providing and fixing Urinal of approved

quality including connection with trap and

142 1 with integral longitudinal flush pipe. (A) 1535.63 Each

Squating plate pattern white earthen ware 550mm

Providing and fixing chromium plated, bottle

143 1 trap with necessary couplings of approved quality 292.87 Each

for wash basin.

Providing and fixing ball cock ofapproved quality

144 1 as directed. (A) Copper Metal (i) 25mm dia. 131.57 Each

Providing and fixing ball cock of approved

quality as directed. (B)Abonite (i) 25mm dia.

Filling with good Quality thor as and where

directed by the Architect / Engineer-in-charge,

in sunk in layers of 15 cm. thickness, including

146 1 watering, ramming well etc. complete, as directed by 3,850.00 Cmt

the Architect / Engineer-in-charge .

Providing laying and jointing in true line and level

mm dia. U.P.V.C. Pipe (SCH- 40) for cold

water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be

147 100 fixed on the wall with the help of clamp at every 71.93 Rmt

two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of

pipe and joints and fixing the same with

solvent, including cost of all

materials.adhesive

Providing laying and jointing in true line and level

mm dia. U.P.V.C. Pipe (SCH- 40) for cold

water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX orequivalent as

approved by Engineer In Charge. Pipe shall be

148 150 fixed on the wall with the help of clamp at every 90.93 Rmt

two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level

mm dia. U.P.V.C. Pipe (SCH- 40) for cold

water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be

149 150 fixed on the wall with the help of clamp at every 117.97 Rmt

two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level

mm dia. U.P.V.C. Pipe (SCH- 40) for cold

water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be

150 100 fixed on the wall with the help of clamp at every 146.65 Rmt

two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level

mm dia. U.P.V.C. Pipe (SCH- 40) for cold

water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be

a 50 fixed on the wall with the help of clamp at every 193.73 Rmt

two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing in line level plumb, fabricating

and fixing three row horizontal barbed wire

fencing and punched tape concertina coil of

turns per meter of 610 mm dia fixed with clips on

top of the angle iron posts. The punched tape

concertina coil having sharp barbs at every 25 mm

spacing shall be 0.5 mm thick and 19 mm width and

weighting 13 kg/100 mt. (Average) as per

151 1 manufacture's specification. The rate shall 390 Rmt

also include providing and fixing

mt.total long MS angle 40 x 40 x 6 mm @3.00 mt.c/c

spacing embaded in RCC column, angle posts shall

be painted with one coats of red oxide and two coats

of enamel paint of approved quality at top compound

Fixing sun film for protection sunlight in black or any

152 1 colour as as directd by engineer In Charge.(Market rate) 850 Smt

Providing & Fixing 3 mm thick F.R.P.sheet

of Approved Quality & Color / Pattern as per

Consultant's design also includes required

fabrication structure in the grid of 2'-0x2'-0 size

using hollow pipe of16 gauge & size 2"x1" &

1"x1" ,G.I. & Bitumen Washers, Silicon paste

153 1 application for fixing the sheet . Rate also 1,930.00 SqM

includesnecessary bending, cutting, labor charges

Zinc Primer coat & Two coats of oil painting of

color as approved by consultants & making

Providing 2 mm thick F.R.P. Gutter with

necessary M.S. Supporting Brackets.

Hiring charges for J.C.B.machine inclduing cost of

155 80 fuel, operator, dirver etc..( 12 hours sift 600 Hrs.

To provide tractor with hydraulic trolley, driver,

Nos. of Labor with all tools like bucket drum,

showels, trikam, pavadas, etc,, to

carryout different works during monsoon for

156 10 Hrs. Shift. Work shall be carried out as per 3,000.00 No.

the instrucitons of Engineer In-Charge.No extra

charged shall be paid for night shift.

Roller Blind Providing and fixing Roller Blind

curtain fixed on window level on wooden

batten and curtain lift with cotton thin rope,

make of aerolax or equivalent design and

157 1 colour as per instruction by engineer – in – Charge 3,285.00 Smt

with necessary hardware fitting, material and

labour etc complete.

Providing & Fixing Door closer - complete of

158 1 Approved make to wooden / Aluminium Doors as per 560 No.

direction of engg. In charge.

Providing and fixiing M.S. Fan clamps type 1 of 16 mm

dia M.S. bar bent to shape with hooked ends of R.C.C.

159 1 slabs during laying incl. painting the exposed protion of 124.74 No.

loops, all as per standard design complete.

Providing cement vata (10cm. x 10 cm. size)

160 1 quarter round in cement mortar 1:1 including neat 23.45 Rmt

cement finishing, watering etc. complete.

Making Water connection from exi.Muni. Water line

Providing and applying fibere reinforced

cementitious micro concrete work in cellings

and beams incl.mixture of

CEMSCREED HM (F) fair mate company

material, FBR bonding agent material with

162 1 water in suItable proportion anti corrosive treatment 530 Smt

on exposed beam,celling steel bars with safeCore R

incl.all kind of labour etc.comp.including three

coat of white wash.

Providing and Fixing 1 H.P. Electrical monoblock

or submarcible water pumps withmotor and required

163 1 cable and switch board of approved brand and 6,800.00 Set

make etc.comp.as directed.

.Providing TMT Bar FE 415 reinforcement for R.C.C.

163 a 1 work including bending, binding and placing in 66.59 Kg.

position complete up to floor two level

ProvidingTMTBarFE500/500Dreinforcement for

R.C.C.workincluding bending,binding and placing in

b 8000 position complete upto floor two level placing in 75.46 Kg.

position complete upto floor two level placing in

position complete upto floor two level

Providing and fixing 30mm thick solid both side prelam

PVC door shutter (sintex door equivalent) with

necessary alluminium fitting with EL-7 section frame

Conveyance charge of Earth,Lime, Murrum, building

rubbish earch manure or sludge and excavated rock and

fly ash,aggregate of any kind etc.comp.upto 5 km

Providing and laying polished granite stone slab 18 mm

thick in risers of steps, dedo and pllars laid on

mm thick cement mortar 1:3 (1 cement:3 coarse

166 200 sand) and jointed with gray cement slurry including 2,690.00 Smt

rubbing & polishing etc.complete.

Wall panelling with 12 mm MDF fixed to existing

alluminium framing and making grove as per

167 1 design and finished with royal plastic paint as per 1,688.00 Smt

instruction of engineer incharge. (N.S.)

Providing and laying 15mm bamboza

wooden flooring as per architect's drawing

with all necessary details as directed by

168 1 the project consultants. Use underlay for 2,690.00 Smt

better result as per Detail specifications and

directed by the project consultants. (N.S.)

Applying two coats of Birla

(whitecementbased) or Asian (acryliclapy- putty)

or equivalent & two coats of primer of approved

169 1 brand and manufacture on new wall surface to 40.19 Sq.M.

give an even shade including thoroughly brushing

the surface free from mortar dropping

Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required

170 1 shape evenshade after thoroughly brushing the surface 113.4 Sq.M.

to remove all dirt, and remains of loose powdered

materials.etc complete

Providing and fixing flush door shutters, solid

core construction with frame of first class

hardwood with cross board and face veneer or

plywood face panels, with both side 1 mm

laminate finishing including anodized

aluminum butt hinges with necessary screws.

Decorative type and pine wood core anodized

minimum 3 no 150 mm long aluminum butt hinges

in flush door shutters with 2 no of brass holdfast

325 mm long 1 no brass tower bolt 250 mm long and

two no of 150 mm long brass door handle .

Decorative both side laminated Flush door 35 mm

thick. with frame of 10 cm x 7 cmt Indian teak

wood frame including all necessary fitting

fixtures hardware screw and adhesive etc fixing up

to all lead and lift height up to 45 mtr from GL etc

complete as per direction of engineer in charge

P/M/F chainlink jali 8'x4' size as per details sketch &

instructionof engineer in charge same as lal darwaja

garden pattern consisting of 3'dia. M.S black pipe 'A'

class 5'4" ht. fixed at 8'9" c/c in C.C 1:2:4 block of

9"x9"x9" size chain link jali of size 2"x2"x10 gauge

fixed in 35x35x5 mm MS angle frame 8'x4' size with

172 1 MS flat of size 25x3 mm welded jali etc.comp.The jali 1,230.00 Rmt

is to be welded to MS pipe with MS flat as instruction

given.The M.S pipe and the M.S angle frame are to be

painted one coat of primer and two coats of paint as

directed in line and level. (N.S)

Providing & Fixing masonary wall with porbandar

lachiya stone with well dressed grooveas per directed

by engg.in charge for foundation, plinth or super

structure level (above plinth level upto floor two level)

in cement mortar 1:5 (1-cement : 5-fine sand)

173 incl.pointing the joint with white cement and

yellow oxide powder in proportion to match stone

colour the joints should be thread grooved as per

exi. lake stone pitching apperance

(A) stone masonary wall/stone dressed single faced

(size 15"x8"x9")

1 (B) stone coping (size 15"x8"x4") 510 Rmt

1 (C) stone coping (size 15"x8"x9") 790 Rmt

1 (D) stone column (size 15"x15") 10,710.00 Cmt

1 (E) stone column top (size 20"x20"x9") 685 No.

Supplying and fixing of 300 mm-L x 15 mm-B

x 380 mm-H Kerb block for Footpath in M-20

grade using 20 mm nominal size black trap

aggregate of Sevaliya/Timbaor equivalent

quality for pre-cast blocks,

reasonablyexposed finish/ formwork

, mould with well equippedwith

vibratory system for kerb stones of approved

design including curing, etc. complete, including

thecost of formwork etc. complete. The rate shall

174 1 also include necessary cutting of asphalt, 393 Rmt

fixing the Kerbstones in line and level on

cm thick sand bedding

withnecessary equipments and materials. The rate

shall also include the flush pointing in CM (1:3) for

all joints of thekerbstones. Filling of zari alone the

sides of the kerbstone fixed with Bituminous

concrete Bituminousconcrete / C.C. mixed in

proper position to flush withthe road surface

as directed by Engineer in change to form a

portable mixture.a) Laying on 5 cm thick Sand Bedding

Providing and Laying of Rubber Moulded Paver Block

Grey/Coloured 60 mm thick, M 35 Grade of any size

shape (Usually Uni-Paver Blocks) using black trap

good quality aggragate of 20 mm nominal size for

footpath,parking areas, service lanes and other areas as

mentioned in the drawing / instruction of engineer in

charge. Cost includes formworks using rubber mould,

Rate providing and laying paver blocks as per

required grading and specification. The paver

block shall be mechanically compacted. The work

of paving blocks shall be executed in line and

175 1 level by skill mason of flooring work only. It should 429 Smt

be laid in such a way that the no cutting of the paver

block to be necessary. if cutting of paver block

necessary then it should be cut by machine only and

carting. The finished surface of the paver block

shall have resonably good, plain finished. Paver blocks

shall be compacted and shall be relaid if necessary.

Gravel or such type of materials shall not be

allowed for production. Laying on 5 cms thick sand

Provoding and fixing flush door shutters, solid core

construction with frame of first class hard wood with

cross board and face veneer or ply wood face panels,

including anodised alluminium butt hinges with

necessary screws. (B) Non- decorative type and

176 1 block board core anodised alluminium butt hinges in 1779.97 Smt

flush door shutters (2) 35 mm thick. Labour work for

fixing any kind of paving with cement pointing in CM

1:2, including watering, ramming etc comp. as dir.For

I) Laying on Sand bedding as per requirement to fix the

C.C.Block / Nibhada Stone in Line & Level

Box type metal letters forming composite box made

from 1mm thick stainless steel plate of grade

having brush finish of following font size to be fixed at

178 Main Gate in english and or Gujrati and including

fixing charges approved before fixing by clent /

A 1 400mm high 1,000.00 Nos.

B 1 300 mm high 750 Nos.

C 1 230 mm high 565 Nos.

Providing and fixing false ceiling at all height including

providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both side

inclusive) as per IS : 277 and consisting of angle cleats

of size 25 mm wide x 1.6 mm thick with flanges of

mm and 37mm, at 1200 mm centre to centre, one flange

fixed to the ceiling with dash fastener 12.5 mm dia x

50mm long with 6mm dia bolts, other flange of cleat

fixed to the angle hangers of 25x10x0.50 mm of

required length with nuts & bolts of required size and

179 1 other end of angle hanger fixed with intermediate G.I. 850 Smt

channels 45x15x0.9 mm running at the spacing of

1200 mm centre to centre, to which the ceiling

section 0.5 mm thick bottom wedge of 80 mm with

tapered flanges of 26 mm each having lips of 10.5 mm,

at 450 mm centre to centre, shall be fixed in a

direction perpendicular to G.I. intermediate channel

with connecting clips made out of 2.64 mm dia x

mm long G.I. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm high having

flanges of 20 mm and 30 mm long, the perimeter

of ceiling fixed to wall/partition with the help of rawl

Providing and fixing of Roller blind curtain/blackout.

The fabric shall be woven from formulated platisol

extruded over a polyaster yarn.The fabric shouldl

be weaved to provide subtle view of the side of the

181 1 blind and should offer elimination of glare and sunlight 2,610.00 Smt

radiance upto a minimum of 80%.The fabric shall be

flame retardant.

Providing and fixing PVC/Gpsysum plain colour false

ceiling with grid type with aluminium frame from

gypsteel, fastners ,props, Finishing as per

architectural drawing allowing openings for

182 1 A.C. Diffusers, Light/Electrical Points etc 933 Smt

–complete, Prior to fixing on frame.(Brand :

Anutone or equivalent ) (N.S.) or as directd by

engineer In Charge.

Provdg. & laying S.W. Gully trap with brick masonry

chamber & water tight G.T.Stone including fixing of

covervSquare mouth trap 100 mm x100 mm size P-Trap

Providing cement vata (10cmx10cmsize) quarter

184 1 roundin cement mortar 1:1 including neat cement 23.45 Rmt.

finishing, waterin getc. complete.

Providing and laying (to level or slopes) and

jointing with stiff mixture of Cement Mortar in

185 1 proportion 1:1 Salt glazed stoneware pipes including 211.05 Rmt.

testing of pipes and joints complete.(A) 100mm dia.

Providing and laying (to level or slopes) and

jointing with stiff mixture of Cement Mortar in

186 1 proportion 1:1 Salt glazed stoneware pipes including 288.23 Rmt.

testing of pipes and joints complete.(B) 150mm dia.

Constructing brick masonry chamber for

underground C.I. Inspection chamber and bends with

bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C.

187 1 top slabe with 1:2:4 mix (1-cement :2- coarse sand :4- 2903.89 Each

graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat

of neat cement on walls and bed concrete etc.

complete.(i) Inside dimensions 455mmx 610mm and

450mm deep for single pipe line.

Constructing brick masonry chamber for underground

C.I. Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

188 1 cement :2- coarse sand :4-graded stone aggregate 3624.51 Each

20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed

concrete etc. complete.(i)Inside dimensions 500mm x

700 mm and 450mm deep for pipe line with one or two

Providing, supplying and fixing precast C.C. blocks (M-

20) edge kerb having size of 75 x 300 x 300 mm depth

and as per design conveying it to the site, jointing into

189 1 C:M 1:3 and racking out the joints incl. 219 Rmt.

necessary excavation of asphalt, soiletc..completed.

Constructing a cooking Sandwich platform 60 cm.

width and 70 cm high resting on B.B.Masonry walls

cm.thick in C.M.(1:6) with (ii) Fixing black Granitee

190 1 30mm thick laid on precast R.C.C. (1:2:4) slab with 754.95 Rmt.

plastering on exposed faces of wall in C.M.(1:4) etc

Providing and fixing hard drawn steel wire fabric

75mm x 25mm mesh or weight not less than 7.75 kg.

per Sq.M. to window frames etc. including60 x 20mm

beading of teak wood.

Providing & fixing 15 cm wide chicken mesh jali with

nails & then application of 15 mm plaster on R.C.C.&

masonary joints as per dir.of engg.in charge

Providing and laying cement concrete flooring 1:2:4 (1-

cement : 2-coarse sand :4-graded stone aggregate

193 1 20mm nominal size) laid in one layer and finished with 348.08 Smt.

a floating coat of neat cement. (A) 50mm thick.

Providing and constructing, Underground (U/G) water

tank of specified capacity, on specified location, for all

depths, in controlled CC of M-200 grade with bottom

slab, top slab and RCC walls, including cost of form

work and reinforcement,with inside and outside plaster

in CM 1 :3 and water proofing treatment as per IWP

194 1000 specification,including injection, grouting, etc. 6.5 Litre

complete. The rate includes for providing and fixing

two nos. 0.6m. x 0.6 m. size medium duty CI

manhole cover/s at top, including wash out pipe line

and inlet and outlet connections etc.complete.

Providing and fixing PVC Printed pain colour false

ceiling with grid type with alluminium frame

consisting of 600mm x 600mm 3mm thick plain

PVC sheet used as panel insert in a frame work made

using anodized alluminium T section of size 1 x 1 (235

x 25mm, 19 gauge or 1 mm thick) in square pattern of

grid sizes of 2 x 2 (600 x 600mm) The alluminium

frame work is supported from the cceiling with the

195 1 help of G.I. hook and G.I. wire/6mm M.S. rods of 300.12 Smt

required sizes to maintain proper level etc. The

aluminium frame work is supported on side wall

with the use of alluminium L section of size 1 x1 (25 x

25mm) angles etc. complete as per direction of

Engineer in charge. Manufactures specification and

Providing and supplying of labour for necessary

manual excavation, cleaning,Shifting of Material Or

196 1 any other, or for any other work as directed by Engineer 551 No

In charge. The Rate includes Handcart with Mazdoor

A 10 Mukadam/supervisior/karigar 425 No

B 2 Fitter/Plumber/Mason 697 No

C 2 WELDER/ Gas cutter at Day /night 689 No

Supplting of welding machine / gas cutter

including cost of welding rods/gas, Transportation,

including carting from site to work place.

E 5 Mazdoor at Day Female 450 No's

E 5 Mazdoor at Day Male 493 No's

Supplying electric breaker machine for RCC slab or

asphalt demolishing work on site by using operator,

fuel, power supply etc.complete as directed. (no

197 2 payment should be allowed for non working 1071.42 Shift

condition of machinery and for pipe line excavation

and M.H. work. Allowed only for break down

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable

198 water of following dia. Nominal bore tube fittings and

clamps including making good the wall, ceiling and

floor etc. complete.

A 1 15 MM DIA 165.21 Rmt

B 1 20 MM DIA 202.97 Rmt

C 1 25 MM DIA 247.25 Rmt

D 1 32 MM DIA 330.36 Rmt

E 1 40 MM DIA 437.66 Rmt

199 1 50 MM DIA 647.3 Rmt

Supplying and fixing C.I. cover 300mm x 300mm

200 1 without frame for Gulley trap (Standard pattern) te 491.8 Each

weight of cover to be not less 4.53 Kg.)

Providing and fixing to wall ceiling and floor

10.0Kg.F/Cm2 working pressure polythene pipes of

the following out side Dia. Low densidy,

201 complete with special falnge compression type

fittings, wall clips etc. including making good the

wall ceiling and floor.