Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.1 LAccepted-Finance VILLAGE P O DHALIARA TEHSIL DEHRA DISTT KANGRA H P | MANDI | HIMACHAL PRADESH | 175013 | ₹14.1 L | L1 | Accepted-Finance L1 |
| 2 | L2₹14.4 LRejected-Finance | ₹14.4 L | L2 | Rejected-Finance L2 |
| 3 | Rejected-Technical | - | - | Rejected-Technical Does not fulfill the criteria as per SBD hence Non- Responsive |
Tender Value
₹13.7 L
EMD Value
₹27,400
Closing Date
21 Jan 2026, 4:45 pmClosed
Executive Engineer HPPWD Division Kotla Behar
EE Kotla Behar
Special repair to HPPWD Rest House at Pragpur, Distt. Kangra HP (SH P/L Repair and maintenance of building)
2026_PWD_125998_1
7928-50 dt 12.01.2026
Open Tender
Civil Works - Roads
90 days
Kotla Behar
Please refer Tender documents.
16 documents required · 16 mandatory
₹350
₹27,400
6 Jun 2026
16 Jan 2026
21 Jan 2026
16 Jan 2026
21 Jan 2026
16 Jan 2026
Dismantling roofing including ridges, hips, valleys, gutters etcetera including stacking of material upto to any lead and lift as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, Goods Service tax, labour cess or other taxes imposed by the Government.
Structural steel work of TATA TISCON/ SAIL/JINDAL/RELIANCE riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete in beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of all leads and lifts upto any height octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
Providing corrugated 0.63mm (zero point six three millimetre) Galvanized Iron sheet roofing fixed with galvanised iron J.or L. hooks bolts and nuts 8 mm (Eight millimetre) diameter with bitumen and Galvanized Iron limpet washers filled with white lead complete excluding the cost of purlins refters and trusses complete as per approved drawing, design and specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
Providing and fixing M.S. (Mild Steel) black plain sheet 2.00mm (Two point zero zero millimeter) thick in facia/eaves boards/soffits /ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Removing dry or oil bound distemper, cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etcetera complete upto any floor level as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.
Providing and applying white cement based putty of average thickness 1mm (One millimtre), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete upto all floor level as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on wall surfaces to give an even shade over and including water thinnable priming coat with distemper primer if required of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth, priming coat with distemper primer complete upto all floor level as directed by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.
Painting extra for every subsequent coat of paint over Item Number 7 (Seven) upto any floor level as directed by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.
Providing and fixing on wall face Single socketed 110 mm (One hundred ten millimetre) diameter unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592 Type A make of Finolex/ Relpipe (Reliance)/Supreme including jointing with seal ring conforming to IS : 5382, leaving 10mm (Ten millimetre) gap for thermal expansion complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Providing and fixing on wall face 110 mm (One hundred ten millimetre) diametre plain bend unplasticised - PVC (Polyvinyl chloride) moulded fittings/ accessories for unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592 Type A of Finolex/ Relpipe (Reliance)/Supreme including jointing with seal ring conforming to IS : 5382, leaving 10mm (Ten millimetre) gap for thermal expansion complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Providing and fixing on wall face 110 mm (One hundred ten millimetre) shoe unplasticised - PVC (Polyvinyl chloride) moulded fittings/ accessories for unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592 Type A Finolex/ Relpipe (Reliance)/Supreme including jointing with seal ring conforming to IS : 5382, leaving 10mm (Ten millimetre) gap for thermal expansion complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Providing and fixing 25mm (twenty five millimetre) dia stainless steel curtain rod having wall thickness of 1.25mm ( One Point Twenty Five Millimeter) with two chromium plated brass brackets fixed with C.P Brass screws and P.V.C sleeves etcetra wherever necessary complete as per directions and entire satisfaction of engineer in charge including carriage of material within all leads , lift and other incidentals . The rate is inclusive of octroi , royality , malkhana , toll tax , sale tax , GST and any taxes imposed by Government.
Repairs to plaster of thickness 12 mm to 20 mm (Twelve millimetre to twenty millimetre) with cement mortar 1:4 (one cement isto four fine sand) in patches of area 2.5 sqm (Two point five square metre) and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete upto all heights/floors as per CPWD specifications 2019 and direction and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.
Washed stone grit plaster on exterior walls height upto all heights above ground level, in two layers, under layer 12 mm (Twelve millimetre) cement plaster 1:4 (One cement isto four coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer at the rate of 2 Kg (Two Kilogram) of cement per square metre, top layer 15 mm (Fifteen millimetre) cement plaster 1:1/ 2:2 (one cement isto half coarse sand isto two stone chipping 10mm (Ten millimetre) nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings complete upto all heights/floors as per HPPWD specifications and direction and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etcetera complete as per directions and approval of Engineer-in- charge.The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.
Applying two or more coat of Ethyl Silicate chemical as approved by Archaeological Survey of India/ Engineer-incharge, of approved brand and manufacturer, with brush or spray on the existing stone masonry surface till there is no further absorption of chemical by stone surface, including protecting the applied surface from direct sunlight by suitable means during application, all complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts, and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
Providing and fixing duro stone vitrified tiles 300x300x10mm (threehundred into three hundred into ten millimeter) of Restile/ Nitco/Simpolo /Kajaria/ Somany/Johnson/Orient & Bell / AGL of approved shade in flooring, treads of steps and landing etecetra laid over a bed of 12mm (Tweleve millimeter) thick cement mortar 1:3 (one cement isto three sand) and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tiles as per specifiactions, approved drawing, design up to all floor level and as per direction and entire satisfaction of the Engineer,-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
Providing and fixing 4mm (Four millimetre) thick commercial ply wood ceiling of approved quality with butt jointing and nails all complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts, and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
Providing plinth protection 50mm (Fifty millimetre) thick cement concrete 1:3:6 (One cement isto three sand isto six graded crushed stone aggregate 20mm (Twenty millimetre) nominal size) including finishing the top surfaces of concrete smooth, as directed by the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
Painting two coat on previously painted steel and other metal surface with enamel paint other than white brushing to give an even shade of ICI, Nerolac/ Berger/ Assian Paint/ Shalimar including cleaning the surface of all dirt, dust and other foreign matter, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
Painting one coat on previously painted steel and other metal surface with white enamel paint brushing to give an even shade of ICI, Nerolac/ Berger/ Assian Paint/ Shalimar including cleaning the surface of all dirt, dust and other foreign matter, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
Earth work in excavation for all type of road structure such as Retaining walls, Breast walls, culverts, drains and parapets etcetera in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock, chiseling/wedging out rocks (where blasting is prohibited) as per drawings and M.OR.D. technical specification clause 305 and 1603 as per direction and entire satisfaction of Engineer-in-Charge, including setting out construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials up to any lead and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface is layers not exceeding 150mm (One hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) up to any depth any quantum of water including cleaning of slush which may arise out during dewatering as per direction and entire satisfaction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rate is including Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominal size) for plain cement concrete, in or under water in open foundation for all types of structures, including pumping or bailing out water/ dewatering (surface/sub-soil water) and including removal of slush which may arise at the time of laying under water for all heights/depth and any quantum of water including cost of form work and curing complete as per drawing and MORD technical specification 802, 803, 1202 & 1203 and as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of material with in all leads lifts and other incidentals. The rates including Royality, Malkhana, Octroi, GST, toll tax, sale tax or any other taxes imposed by the Government.
Providing and laying of inter locking concrete paver blocks make of NTC/NITCO/HPPWD approved having thickness 80mm (eighty millimeter) Grade M-40 IS Code-15658:2006 and Technical Specification Clause 1504 and as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of material with in all leads lifts and other incidentals. The rates including Royality, Malkhana, Octroi, GST, toll tax, sale tax or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated concrete for plain cement concrete Grade-M20 (M-Twenty) Nominal mix 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate (40mm) forty millimeter nominal size) in or under water in open foundation for all types of structure including cost of form work and curing complete as per drawing and MORD technical specification section 800, 900 & 1200 and as per the direction and the entire satisfaction of Engineer-in-Charge, including pumping or bailing out water/dewatering (surface and sub-soil water) and removal of the slush which may arise at the time of laying under water for all heights/depths and any quantum of water complete including carriage of materials up to all leads, lifts and other incidentals. The rates including Royality, Malkhana, Octroi, GST, toll tax, sale tax or any other taxes imposed by the Government.
Dismantling doors, windows and clerestory windows (steel or wood) shutter of area not exceeding 3.00 sqm (Three point zero zero square metre) in area, any thickness including chowkhats, architrave, holdfasts etcetera complete and stacking upto any lead, lift and other incidentals as per CPWD specifications 2019 and direction and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.
Dismantling doors, windows and clerestory windows (steel or wood) shutter of area exceeding 3.00 sqm (Three point zero zero square metre) in area, any thickness including chowkhats, architrave, holdfasts etcetera complete and stacking upto any lead, lift and other incidentals as per direction and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m (One point five zero) in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm (One point six zero plus minus zero point two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm (One hundred into eight millimetre) size for fixing frame to finished wall and necessary stainless steel screws etcetera. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm (Ninety two millimetre into forty four millimetre) & sash 32 x 60 mm (Thirty two into sixty milliemtre) both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension complete as per direction and entire satisfaction of the Engineer in charge including carriage of material within all lead, lift and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.
Providing and fixing glazing with float glass panes of 5 mm (Five millimetre) thickness(weight not less than 12.50 kg/ sqm (Twelve point five zero kilogram per square metre) in aluminium/uPVC door, window, ventilator shutters and partitions etcetera with EPDM rubber neoprene gasket etcetera or any other required necessary fitting complete as per direction and entire satisfaction of the Engineer in charge including carriage of material within all lead, lift and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.
Providing and Fixing factory made uPVC door frame,made of uPVC exturded sections, of size 65 mm x 55mm (Sixty five millimetre into fifty five millimetre) with wall thickness 2.0 mm (± 0.2 mm), corners ofthe door frame to be mitred cut and jointed with plasticbrackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm (Twenty eight millimetre into thirty millimetre) having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 Nos (Three number) of 125 mm (One hundred twenty five millimetre) long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per direction and entire satisfaction of the Engineer in charge including carriage of material within all lead, lift and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.
Providing and fixing 37 mm (Thirty seven millimetre) thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100 x 37 mm (One hundred into thirty seven millimetre) with wall thickness 2 mm (± 0.2 mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 (Two) number of plastic brackets of size 75 mm x 220 mm at each corner and stainless steel screws, reinforcing the hinge side of style by inserting PVC profile of size 28x30 mm (Twenty eight into thirty millimetre), with wall thickness 2 mm ( ± 0.2 mm). Lockrail of size 100x37 mm (One hundred into thirty seven millimetre), wall thickness 2 mm (+ 0.2 mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100x 20 mm (One hundred into thirty millimetre), and inserting 2 nos tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturer's specification and as per direction and entire satisfaction of the Engineer in charge including carriage of material within all lead, lift and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.
Providing and laying integral cement based treatment for treatment with Bitumen felt (hessian base) type 3 (three) grade I conforming to IS : 1322 over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot at the rate 1.45Kg (One point four five kilogram) per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6mm (six millimetre) and down size or pea sized gravel spread at 6 (Six) cubic decimeter per square metre, including preparation of surface but excluding grading complete as per direction and entire satisfaction of the Engineer in charge including carriage of material within all lead, lift and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.36 MB
6.pdf
Tender Documents • 2.34 MB
BOQ_185676.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid